Fiber-optic surface plasmon resonance sensors in the near-infrared spectral region

Highly sensitive differential fiber-optic SPR sensor in telecom band

We proposed a differential fiber-optic SPR remote sensor with ultra-high sensitivity in telecom band. The working band of the sensor is designed as the C-band which is the low loss band of optical fiber communication aiming to improve the sensitivity and enable the capability of remote monitoring. The sensor head is a BK7 prism coated with Au/TiO₂ films, enabling two channels for differential intensity interrogation. The intensities of the reflected lights through the channels vary oppositely within the measurement range of refractive index. Due to the sharp dip of angular resonant response in the C-band, the differential signal produces a steep slope as the refractive index of the sample varies, thus higher sensitivity is expected in a narrow measurement range. According to the results, the sensitivity is as high as 456 V/RIUs within the narrow measurement range of 1.3×10^-2 RIUs and the resolution reaches to 6×10^-6 RIUs. The measurement range can be tuned conveniently by adjusting the thickness of TiO₂ film and can be expanded by increasing the number of sensing channels, which provides great convenience for the application of biosensor requiring high sensitivity.

Portable and field-deployed surface plasmon resonance and plasmonic sensors

Plasmonic sensors are ideally suited for the design of small, integrated, and portable devices that can be employed in situ for the detection of analytes relevant to environmental sciences, clinical diagnostics, infectious diseases, food, and industrial applications. To successfully deploy plasmonic sensors, scaled-down analytical devices based on surface plasmon resonance (SPR) and localized surface plasmon resonance (LSPR) must integrate optics, plasmonic materials, surface chemistry, fluidics, detectors and data processing in a functional instrument with a small footprint. The field has significantly progressed from the implementation of the various components in specifically designed prism-based instruments to the use of nanomaterials, optical fibers and smartphones to yield increasingly portable devices, which have been shown for a number of applications in the laboratory and deployed on site for environmental, biomedical/clinical, and food applications. A roadmap to deploy plasmonic sensors is provided by reviewing the current successes and by laying out the directions the field is currently taking to increase the use of field-deployed plasmonic sensors at the point-of-care, in the environment and in industries.

A Novel Approach to Realizing Low-Cost Plasmonic Optical Fiber Sensors: Light-Diffusing Fibers Covered by Thin Metal Films

We have investigated, in a numerical and experimental way, a refractive index (RI) sensor based on surface plasmon resonance (SPR) in a silver-coated light-diffusing fiber (LDF). The experimental tests were conducted using water-glycerine mixtures with refractive indices ranging from 1.332 to 1.388. In the considered refractive index range, the experimental results show a sensitivity of the SPR wavelength to the outer medium’s RI ranging from 2600 to 4700 nm/RIU, which is larger than the sensitivity recently reported for a gold-coated LDF sensor (1200 to 4000nm/RIU). The silver-coated sensor is also shown to ensure a higher signal-to-noise ratio (SNR) compared to the gold-coated sensor.

Refractive Index Sensing through Surface Plasmon Resonance in Light-Diffusing Fibers

In this paper, we show that light-diffusing fibers (LDF) can be efficiently used as host material for surface plasmon resonance (SPR)-based refractive index sensing. This novel platform does not require a chemical procedure to remove the cladding or enhance the evanescent field, which is expected to give better reproducibility of the sensing interface. The SPR sensor has been realized by first removing the cladding with a simple mechanical stripper, and then covering the unclad fiber surface with a thin gold film. The tests have been carried out using water–glycerin mixtures with refractive indices ranging from 1.332 to 1.394. The experimental results reveal a high sensitivity of the SPR wavelength to the outer medium’s refractive index, with values ranging from ~1500 to ~4000 nm/RIU in the analyzed range. The results suggest that the proposed optical fiber sensor platform could be used in biochemical applications.

A field-deployed surface plasmon resonance (SPR) sensor for RDX quantification in environmental waters

A field-deployable surface plasmon resonance (SPR) sensor is reported for the detection RDX at ppb concentration in environmental samples.

Smart design of fiber optic surfaces for improved plasmonic biosensing

Although the phenomenon of surface plasmon resonance (SPR) is known for more than a century now, traditional prism-based SPR platforms have hardly escaped the research laboratories despite being recognized for the sensitive and specific performance. Significant efforts have been made over the last years to overcome their existing limitations by coupling the SPR phenomenon to the fiber optic (FO) technology. While this platform has been promoted as cost-effective and simpler alternative capable of handling label-free bioassays, quantification and real-time monitoring of biomolecular interactions, examples of its applicability in sensing and biosensing remain to date very limited. The FO-SPR system is still in development and requires further advancements for reaching the stability and sensitivity of the benchmark SPR systems. Among existing strategies for device improvement, those based on modifying the FO tips using nanomaterials are mostly studied. These small-scale objects provide a wide range of possibilities for alternating the architecture of the FO sensitive zone, enabling also unique effects such as localized SPR (LSPR). This mini-review summarizes the latest innovations in the fabrication procedures which use nanoparticles or other nanomaterials, aiming at FO-SPR technology performance improvements, as well as addition of new device features and functionalities.

Hollow fiber surface plasmon resonance sensor for the detection of liquid with high refractive index

A new kind of surface plasmon resonance (SPR) sensor based on silver-coated hollow fiber (HF) structure for the detection of liquids with high refractive index (RI) is presented. Liquid sensed medium with high RI is filled in the hollow core of the HF and its RI can be detected by measuring the transmission spectra of the HF SPR sensor. The designed sensors with different silver thicknesses are fabricated and the transmission spectra for filled liquids with different RI are measured to investigate the performances of the sensors. Theoretical analysis is also carried out to evaluate the performance. The simulation results agree well with the experimental results. Factors that might affect sensitivity and detection accuracy of the sensor are discussed. The highest sensitivity achieved is 6,607 nm/RIU, which is comparable to the sensitivities of the other reported fiber SPR sensors.

Adaptable infrared surface plasmon resonance spectroscopy accessory

A second generation prototype enabling surface plasmon resonance spectroscopic measurements in the infrared (IR) range is described. The new design (v2) uses the optical train (optics and detector) within conventional FT-IR spectrometers by confining dimensions of the accessory to space available within the sample compartment of the spectrometer. The v2 accessory builds upon knowledge gained from a previous version that was based on a modified commercial variable angle spectroscopic accessory and addresses observed limitations of the original design-improved temporal stability and measurement acquisition speed, crucial to biomolecular binding studies, as well as optical flexibility, a requirement for investigations of novel plasmon-supporting materials. Different aspects of the accessory, including temporal stability, mechanical resilience, and sensitivity to changes in refractive index of a sample were evaluated and presented in this contribution.

Characterization of a variable angle reflection Fourier transform infrared accessory modified for surface plasmon resonance spectroscopy

The Harrick AutoSeagull variable angle reflection accessory for Fourier transform infrared (FT-IR) spectrometers provides access to various spectroscopic techniques in a highly flexible platform. In particular, its ability to perform total internal reflection measurements is of interest because it also forms the basis for surface plasmon resonance (SPR) spectroscopy in prism-based configurations. The work presented here discusses the modification of the AutoSeagull to perform SPR spectroscopy, allowing for easy incorporation of the technique into most common FT-IR spectrometers. The wavelength dependency of the dielectric constant of the plasmon-supporting metal (in our case, gold) is largely responsible for the sensitivity attributed to changes in the sample's refractive index (RI) monitored by SPR spectroscopy. Furthermore, the optical properties of gold are such that when near-infrared (NIR) and/or mid-infrared (mid-IR) wavelengths are used to excite surface plasmons, higher sensitivities to RI changes are experienced compared to surface plasmons excited with visible wavelengths. The result is that in addition to instrumental simplicity, SPR analysis on FT-IR spectrometers, as permitted by the modified AutoSeagull, also benefits from the wavelength ranges accessible. Adaptation of the AutoSeagull to SPR spectroscopy involved the incorporation of slit apertures to minimize the angular spread reaching the detector, resulting in sharper SPR "dips" but at the cost of noisier spectra. In addition, discussion of the system's analytical performance includes comparison of dip quality as a function of slit size, tailoring of the dip minima location with respect to incident angle, and sensitivity to bulk RI changes.

Fiber optic SPR biosensing of DNA hybridization and DNA-protein interactions

In this paper we present a fiber optic surface plasmon resonance (SPR) sensor as a reusable, cost-effective and label free biosensor for measuring DNA hybridization and DNA-protein interactions. This is the first paper that combines the concept of a fiber-based SPR system with DNA aptamer bioreceptors. The fibers were sputtered with a 50nm gold layer which was then covered with a protein repulsive self-assembled monolayer of mixed polyethylene glycol (PEG). Streptavidin was attached to the PEG's carboxyl groups to serve as a versatile binding element for biotinylated ssDNA. The ssDNA coated SPR fibers were first evaluated as a nucleic acid biosensor through a DNA-DNA hybridization assay for a random 37-mer ssDNA. This single stranded DNA showed a 15 nucleotides overlap with the receptor ssDNA on the SPR fiber. A linear calibration curve was observed in 0.5-5 microM range. A negative control test did not reveal any significant non-specific binding, and the biosensor was easily regenerated. In a second assay the fiber optic SPR biosensor was functionalized with ssDNA aptamers against human immunoglobulin E. Limits of detection (2nM) and quantification (6nM) in the low nanomolar range were observed. The presented biosensor was not only useful for DNA and protein quantification purposes, but also to reveal the binding kinetics occurring at the sensor surface. The dissociation constant between aptamer and hIgE was equal to 30.9+/-2.9nM. The observed kinetics fully comply with most data from the literature and were also confirmed by own control measurements.

Towards integrated and sensitive surface plasmon resonance biosensors: A review of recent progress

The use of surface plasmon resonance (SPR) biosensors is increasingly popular in fundamental biological studies, health science research, drug discovery, clinical diagnosis, and environmental and agricultural monitoring. SPR allows for the qualitative and quantitative measurements of biomolecular interactions in real-time without requiring a labeling procedure. Today, the development of SPR is geared toward the design of compact, low-cost, and sensitive biosensors. Rapid advances in micro-fabrication technology have made available integratable opto-electronic components suitable for SPR. This review paper focuses on the progress made over the past 4 years toward this integration. Readers will find the descriptions of novel SPR optical approaches and materials. Nano-technology is also increasingly used in the design of biologically optimized and optically enhanced surfaces for SPR. Much of this work is leading to the integration of sensitive SPR to lab-on-a-chip platforms.