Two-dimensional attenuated total reflection infrared correlation spectroscopy study of the desorption process of water-soaked cotton fibers

In vitro Fourier transform infrared spectroscopic study of the effect of glycerol on the uptake of beclomethasone dipropionate in living respiratory cells

The quantification of drug in living cells is of increasing interest in pharmaceutical research because of its importance in understanding drug efficacy and toxicity. Label-free in situ measurement methods are advantageous for their ability to obtain chemical and time profiles without the need of labelling or extraction steps. We have previously shown that Fourier transform infrared (FTIR) spectroscopy has the potential to quantify drug in situ within living cells at micromolar level when a simple solution of drug was added to the medium. The purpose of this study was to demonstrate that the approach can evaluate more complex systems such as the effect of membrane modification by a formulation on drug uptakes. The inhaled corticosteroid, beclomethasone dipropionate (BDP), in Calu-3 respiratory epithelial cells in the absence and presence of glycerol, an excipient in some inhaled medicines was used as the model system. The FTIR method was first validated for limit of detection (LOD) and quantification (LOQ) according to published guidelines and the LOQ was found to be ∼ 20 μM, good enough to quantify BDP in the living cell. The uptake of BDP by living Calu-3 cells was found to be reduced in the presence of glycerol as expected due to the stiffening of the cell membrane by the presence of glycerol in the formulation. This study demonstrates the valuable analytical capability of live-cell FTIR to study the effect of formulation on drug transport in lungs and to evaluate drug availability to intracellular targets. We conclude that FTIR has potential to contribute widely at the frontier of live-cell studies.

Structural changes of bacterial cellulose due to incubation in conditions simulating human plasma in the presence of selected pathogens

Bacterial nanocellulose (BNC) is a natural biomaterial with a wide range of medical applications. However, it cannot be used as a biological implant of the circulatory system without checking whether it is biodegradable under human plasma conditions. This work aimed to investigate the BNC biodegradation by selected pathogens under conditions simulating human plasma. The BNC was incubated in simulated biological fluids with or without Staphylococcus aureus, Candida albicans and Aspergillus fumigatus, and its physicochemical properties were studied. The results showed that the incubation of BNC in simulated body fluid with A. fumigatus contributes more to its degradation than that under other conditions tested. The rearrangement of the hydrogen-bond network in this case resulted in a more compact structure, with an increased crystallinity index, reduced thermal stability and looser cross-linking. Therefore, although BNC shows great potential as a cardiovascular implant material, before use for this purpose its biodegradability should be limited.

The effect of dehydration/rehydration of bacterial nanocellulose on its tensile strength and physicochemical properties

Bacterial nanocellulose (BNC) is a natural biomaterial with a wide range of biomedical applications. BNC contains 99 % of water which makes it too thick to be used as a bioimplant material. The aim of the work was to determine the effect of the BNC dehydration followed by rehydration on its mechanical and physicochemical properties, in the context of the use of BNC as bio-prostheses in the cardiovascular system. Dehydration involved the convection-drying at 25 and 105 °C, and the freeze-drying, while rehydration - the soaking in water. All modified BNC samples had reduced thickness, and results obtained from FT-IR, XRD, and SEM analysis revealed that 25 °C BNC convection-dried after soaking in water was characterized by the highest: tensile strength (17.4 MPa), thermal stability (253 °C), dry mass content (4.34 %) and I_α/I_β ratio (1.10). Therefore, 25 °C convection-dried BNC followed by soaking in water can be considered as a material suitable for cardiovascular implants.

Time Dependent Influence of Rotating Magnetic Field on Bacterial Cellulose

The aim of the study was to assess the influence of rotating magnetic field (RMF) on the morphology, physicochemical properties, and the water holding capacity of bacterial cellulose (BC) synthetized by Gluconacetobacter xylinus. The cultures of G. xylinus were exposed to RMF of frequency that equals 50 Hz and magnetic induction 34 mT for 3, 5, and 7 days during cultivation at 28°C in the customized RMF exposure system. It was revealed that BC exposed for 3 days to RMF exhibited the highest water retention capacity as compared to the samples exposed for 5 and 7 days. The observation was confirmed for both the control and RMF exposed BC. It was proved that the BC exposed samples showed up to 26% higher water retention capacity as compared to the control samples. These samples also required the highest temperature to release the water molecules. Such findings agreed with the observation via SEM examination which revealed that the structure of BC synthesized for 7 days was more compacted than the sample exposed to RMF for 3 days. Furthermore, the analysis of 2D correlation of Fourier transform infrared spectra demonstrated the impact of RMF exposure on the dynamics of BC microfibers crystallinity formation.

Characterization of attenuated total reflection infrared spectral intensity variations of immature and mature cotton fibers by two-dimensional correlation analysis

Two-dimensional (2D) correlation analysis was applied to characterize the attenuated total reflection (ATR) spectral intensity fluctuations of immature and mature cotton fibers. Prior to 2D analysis, the spectra were leveled to zero at the peak intensity of 1800 cm(-1) and then were normalized at the peak intensity of 660 cm(-1) to subjectively correct the variations resulting from ATR sampling. Next, normalized spectra were subjected to principal component analysis (PCA), and two clusters of immature and mature fibers were confirmed on the basis of the first principal component (PC1) negative and positive scores, respectively. The normalized spectra clearly demonstrated the intensity increase or decrease of the bands ascribed to different C-O confirmations of primary alcohols in the 1050-950 cm(-1) region, which was not apparent from raw ATR spectra. The PC1 increasing-induced 2D correlation analysis revealed remarkable differences between the immature and mature fibers. Of interest were that: (1) Both intensity increase of two bands at 968 and 956 cm(-1) and the shifting of 968 cm(-1) in immature fibers to 956 cm(-1) in mature fibers, together with the intensity decreasing and shifting of the 1048 and 1042 cm(-1) bands, are the characteristics of cotton fiber development and maturation. (2) Intensities of most bands in the 1800-1200 cm(-1) region decreased with the fiber growth, suggesting they are from either noncellulosic components or CH and OH fractions in amorphous celluloses. (3) The reverse sequence of intensity variations of the bands in the 1100-1000 cm(-1) and 1000-900 cm(-1) region of asynchronous spectra indicated a different mechanism of compositional and structural changes in developing cotton fibers at different growth stages.