Surface-enhanced Raman scattering (SERS) evaluation protocol for nanometallic surfaces

Effect of substituents on surface equilibria of thiophenols and isoquinolines on gold substrates studied using surface-enhanced Raman spectroscopy

The effect of substituents on the surface adsorption equilibria of thiophenols and isoquinolines on gold substrates was studied using surface-enhanced Raman spectroscopy (SERS) in order to determine the effects of the localized dipole moments and charge donating/withdrawing properties on the binding affinity. Two common classes of molecules used in SERS studies were examined, which included substituted aromatic thiols and nitrogen heterocyclic aromatic molecules (azaarenes), due to their strong affinity for gold surfaces. Unsubstituted thiophenol in aqueous solution binds strongly to gold surfaces. Therefore, it is difficult to measure an equilibrium constant, since even at concentrations of 10-8 M nearly a complete self-assembled monolayer (SAM) forms. In contrast, substituted thiophenols with electron-withdrawing groups, such as halogenated thiophenols, bind much less strongly, allowing equilibrium constants to be obtained. It is believed that the substituent withdrawing charge away from the sulfur atom affects the adsorption/binding between the analyte and surface. Thiophenols substituted with electron donating groups behaved similar to unsubstituted thiophenol, where a SAM was observed at concentrations as low as 10-8 M. These functional groups did not hinder the ability of the sulfur groups to bind with gold. In addition, a series of bromine-substituted isoquinolines, a group of azaarene compounds, were measured to determine the effects that the bromine substituent has when it is bound to the two different rings and if position on the rings has an effect. The azaarene class of molecules, including isoquinoline, adsorbs less strongly than thiophenols, and a dual Langmuir isotherm phenomenon is observed where protonated and neutral bromoisoquinoline molecules occupy two different types of sites on Klarite substrates, which consist of inverted micro-pyramids on Si wafers with rough/nanostructured Au coatings. Protonated isoquinolines bind to nucleophilic sites on the substrates which tend to occur on flatter regions of the substrate. By contrast, neutral isoquinolines bind to electrophilic sites which are predominant near microscopic edges on the substrate. The presence of the bromine substituent and its position in the fused ring structure changes the Gibbs free energies of adsorption, depending on which ring the substituent is in. These results can help to guide the development of SERS for analytical applications by demonstrating how changes in functional groups can affect the equilibrium constants, which are critical for determining the effectiveness of SERS as a tool for trace detection of analytes.

Surface Modification and Charge Injection in a Nanocomposite Of Metal Nanoparticles and Semiconductor Oxide Nanostructures

Combining two materials in a nanoscale level can create a composite with new functionalities and improvements in their physical and chemical properties. Here we present a high-throughput approach to produce a nanocomposite consisting of metal nanoparticles and semiconductor oxide nanostructures. Volmer-Weber growth, though unfavorable for thin films, promotes nucleation of dense and isolated metal nanoparticles on crystalline oxide nanostructures, resulting in new material properties. We demonstrate such a growth of Au nanoparticles on SnO₂ nanostructures and a remarkable sensitivity of the nanocomposite for detecting traces of analytes in surface enhanced Raman spectroscopy. Au nanoparticles with tunable size enable us to modify surface wettability and convert hydrophilic oxide surfaces into super-hydrophobic with contact angles over 150°. We also find that charge injection through electron beam exposure shows the same effect as photo-induced charge separation, providing an extra Raman enhancement up to an order of magnitude.

Surface Enhanced Raman Spectroscopy for Quantitative Analysis: Results of a Large-Scale European Multi-Instrument Interlaboratory Study

Surface-enhanced Raman scattering (SERS) is a powerful and sensitive technique for the detection of fingerprint signals of molecules and for the investigation of a series of surface chemical reactions. Many studies introduced quantitative applications of SERS in various fields, and several SERS methods have been implemented for each specific application, ranging in performance characteristics, analytes used, instruments, and analytical matrices. In general, very few methods have been validated according to international guidelines. As a consequence, the application of SERS in highly regulated environments is still considered risky, and the perception of a poorly reproducible and insufficiently robust analytical technique has persistently retarded its routine implementation. Collaborative trials are a type of interlaboratory study (ILS) frequently performed to ascertain the quality of a single analytical method. The idea of an ILS of quantification with SERS arose within the framework of Working Group 1 (WG1) of the EU COST Action BM1401 Raman4Clinics in an effort to overcome the problematic perception of quantitative SERS methods. Here, we report the first interlaboratory SERS study ever conducted, involving 15 laboratories and 44 researchers. In this study, we tried to define a methodology to assess the reproducibility and trueness of a quantitative SERS method and to compare different methods. In our opinion, this is a first important step toward a “standardization” process of SERS protocols, not proposed by a single laboratory but by a larger community.

Sensitive Detection of Competitive Molecular Adsorption by Surface-Enhanced Raman Spectroscopy

Surface adsorption plays a critical role in a wide variety of fields from surface catalysis to molecular separation. Despite the importance, limited access to simultaneously sensitive and selective detection mechanisms has hampered the acquisition of comprehensive and versatile experimental data needed to understand the complex aspects of mixture adsorption, calling for a molecular detection method capable of obtaining the surface adsorption isotherms over a wide range of concentrations as well as distinguishing the competitive adsorption of different adsorbates. Here, we test surface-enhanced Raman spectroscopy (SERS) as an effective analysis tool of surface adsorption phenomena. Using a sensitive SERS substrate, we characterize the adsorption isotherms of chemical species of various binding energies. We obtained the isotherms for strongly binding species in a concentration range from subpicomolar to micromolar. A log-sigmoidal dependency of the SERS signals to the analyte concentration could be modeled by surface binding theories accurately using molecular dynamics simulations, thereby bringing out the potential capability of sensitive SERS for describing a single-compound adsorption process. SERS also enabled the determination of competitive adsorption isotherms from a multiple-compound solution for the first time. The successful demonstration of the sensitive and selective characterization of surface adsorption lends SERS adaptability to a cheap, facile, and effective solution for chemical analysis.

Surface regeneration and signal increase in surface-enhanced Raman scattering substrates

Regenerated surface-enhanced Raman scattering (SERS) substrates allow users the ability to not only reuse sensing surfaces, but also tailor them to the sensing application needs (wavelength of the available laser, plasmon band matching). In this review, we discuss the development of SERS substrates for response to emerging threats and some of our collaborative efforts to improve on the use of commercially available substrate surfaces. Thus, we are able to extend the use of these substrates to broader Army needs (like emerging threat response).

Reassessing SERS enhancement factors: using thermodynamics to drive substrate design

Over the past 40 years fundamental and application research into Surface-Enhanced Raman Scattering (SERS) has been explored by academia, industry, and government laboratories. To date however, SERS has achieved little commercial success as an analytical technique. Researchers are tackling a variety of paths to help break through the commercial barrier by addressing the reproducibility in both the SERS substrates and SERS signals as well as continuing to explore the underlying mechanisms. To this end, investigators use a variety of methodologies, typically studying strongly binding analytes such as aromatic thiols and azarenes, and report SERS enhancement factor calculations. However a drawback of the traditional SERS enhancement factor calculation is that it does not yield enough information to understand substrate reproducibility, application potential with another analyte, or the driving factors behind the molecule–metal interaction. Our work at the US Army Edgewood Chemical Biological Center has focused on these questions and we have shown that thermodynamic principles play a key role in the SERS response and are an essential factor in future designs of substrates and applications. This work will discuss the advantages and disadvantages of various experimental techniques used to report SERS enhancement with planar SERS substrates and present our alternative SERS enhancement value. We will report on three types of analysis scenarios that all yield different information concerning the effectiveness of the SERS substrate, practical application of the substrate, and finally the thermodynamic properties of the substrate. We believe that through this work a greater understanding for designing substrates will be achieved, one that is based on both thermodynamic and plasmonic properties as opposed to just plasmonic properties. This new understanding and potential change in substrate design will enable more applications for SERS based methodologies including targeting molecules that are traditionally not easily detected with SERS due to the perceived weak molecule–metal interaction of substrates.

Recent progress on colloidal metal nanoparticles as signal enhancers in nanosensing

Colloidal metal nanoparticles present very special optical and electromagnetic properties at the nanoscale range. Such plasmonic properties have derived in a huge research field that encompasses the understanding of nanoparticle formation mechanisms for the ultimate goal of developing novel materials for real-life applications. Plasmonic sensing is experiencing a rapid transition by taking advantage of the characteristic properties of colloidal metal nanoparticles. However, a rational design of novel nanoplasmonic substrates, which gathers as much as the required properties for a substrate to be a 'good' sensor is critical through the development of applications that can be effectively transferred as applied technologies. Also, the chosen sensing technique is a key factor when planning the design of a new plasmonic-based sensor. Several factors such as composition, shape, size, particle interactions or stability among others will define the final quality of the nanomaterial as sensing platform. Herein, we review the latest and most promising state-of-the art of nanoplasmonic-based sensors in four differentiated areas regarding the surface-enhanced spectroscopy detection technique being LSPR-, SERS- and SEIRA-, and SEF based platforms.

Critical role of adsorption equilibria on the determination of surface-enhanced Raman enhancement

Surface-enhanced Raman spectroscopy (SERS) is a useful technique for probing analyte-noble metal interactions and determining thermodynamic properties such as their surface reaction equilibrium constants and binding energies. In this study, we measure the binding equilibrium constants and Gibbs free energy of binding for a series of nitrogen-containing aromatic molecules adsorbed on Klarite substrates. A dual Langmuir dependence of the SERS intensity on concentration was observed for the six species studied, indicating the presence of at least two different binding energies. We relate the measured binding energies to the previously described SERS enhancement value (SEV) and show that the SEV is proportional to the traditional SERS enhancement factor G, with a constant of proportionality that is critically dependent on the adsorption equilibrium constant determined from the dual Langmuir isotherm. We believe the approach described is generally applicable to many SERS substrates, both as a prescriptive approach to determining their relative performance and as a probe of the substrate's affinity for a target adsorbate.