SERS mapping in Langmuir-Blodgett films and single-molecule detection

Hierarchical Superhydrophobic Device to Concentrate and Precisely Localize Water-Soluble Analytes: A Route to Environmental Analysis

An efficient superhydrophobic concentrator is developed using a hierarchical superhydrophobic surface on which the evaporation of a sessile droplet (6 μL) drives the nonvolatile elements it contains on a predefined micrometric analytical surface (pedestal of 80 μm diameter). This hierarchical silicon surface exhibits a surface texture made of etched nanopillars and consists of micropillars and guiding lines, arranged in radial symmetry around the central pedestal. The guiding lines ensure the overall convergence of the sessile droplet toward the central pedestal during evaporation. The nanopillar texturing induced a delay in the Cassie-Baxter to Wenzel regime transition, until the edge of the droplet reaches the periphery of the pedestal. Experiments performed with polymer microparticles suspended in ultrapure water or with DNA molecules solubilized in ultrapure water at sub-fM concentrations demonstrated that the totality of the nonvolatile elements in the liquid microvolume is delivered on or close to the pedestal area, in a very reproducible manner. The very high concentration capacity of the device enabled the discrimination of the degree of purity of ultrapure water samples from different origins. The concentrator also turned out to be functional for raw water samples, opening possible applications to environmental analysis.

Surface-Enhanced Raman Scattering Stimulated by Strong Metal-Molecule Interactions in a C60 Single-Molecule Junction

Specifying the geometric and electronic structures of a metal-molecule interface at the single-molecule level is crucial for the improvement of organic electronics. A single-molecule junction (SMJ) can be used to investigate interfaces because it can be regarded as an elementary unit of the interface structure. Although considerable efforts have been made to this end, the detection of structural changes in SMJs associated with metal-molecule interactions remains challenging. In this study, we detected the surface-enhanced Raman scattering (SERS) signal originating from the metal-molecule interaction change induced by a local structural change in a C₆₀ SMJ. This junction has attracted wide attention owing to its unique electronic and vibronic properties. We fabricated a C₆₀ SMJ using a lithographically fabricated Au electrode and measured the SERS spectra along with the current-voltage (I-V) response. By continuous measurement of SERS for the C₆₀ SMJ, we obtained SERS spectra dependent on the local structural change. The analysis of the I-V response revealed that the vibration energy shift originates from the change in the local structure for different Au-C₆₀ interactions. Based on the discrimination of the states in accordance with the Au-C₆₀ interaction, we found that the probability of SERS for geometry with a large Au-C₆₀ interaction was enhanced.

Reproducible and Bendable SERS Substrates with Tailored Wettability Using Block Copolymers and Anodic Aluminum Oxide Templates

Surface properties are essential for substrates exhibiting high sensitivity in surface-enhanced Raman scattering (SERS) applications. In this work, novel SERS hybrid substrates using polystyrene-block-poly(methyl methacrylate) and anodic aluminum oxide templates is presented. The hybrid substrates not only possess hierarchical porous nanostructures but also exhibit superhydrophilic surface properties with the water contact angle ≈0°. Such surfaces play an important role in providing uniform enhanced intensities over large areas (relative standard deviation ≈10%); moreover, these substrates are found to be highly sensitive (limit of detection ≈10^-12 m for rhodamine 6G (R6G)). The results show that the hybrid SERS substrates can achieve the simultaneous detection of multicomponent mixtures of different target molecules, such as R6G, crystal violet, and methylene blue. Furthermore, the bending experiments show that about 70% of the SERS intensities are maintained after bending from ≈30° to 150°.

Digital Protocol for Chemical Analysis at Ultralow Concentrations by Surface-Enhanced Raman Scattering

Single molecule surface-enhanced Raman spectroscopy (SM-SERS) has the potential to revolutionize quantitative analysis at ultralow concentrations (less than 1 nM). However, there are no established protocols to generalize the application of this technique in analytical chemistry. Here, a protocol for quantification at ultralow concentrations using SM-SERS is proposed. The approach aims to take advantage of the stochastic nature of the single-molecule regime to achieved lower limits of quantification (LOQ). Two emerging contaminants commonly found in aquatic environments, enrofloxacin (ENRO) and ciprofloxacin (CIPRO), were chosen as nonresonant molecular probes. The methodology involves a multivariate resolution curve fitting known as non-negative matrix factorization with alternating least-squares algorithm (NMF-ALS) to solve spectral overlaps. The key element of the quantification is to realize that, under SM-SERS conditions, the Raman intensity generated by a molecule adsorbed on a "hotspot" can be digitalized. Therefore, the number of SERS event counts (rather than SERS intensities) was shown to be proportional to the solution concentration. This allowed the determination of both ENRO and CIPRO with high accuracy and precision even at ultralow concentrations regime. The LOQ for both ENRO and CIPRO were achieved at 2.8 pM. The digital SERS protocol, suggested here, is a roadmap for the implementation of SM-SERS as a routine tool for quantification at ultralow concentrations.

High Raman-to-fluorescence ratio of Rhodamine 6G excited with 532 nm laser wavelength using a closely packed, self-assembled monolayer of silver nanoparticles

A highly efficient Raman-to-fluorescence ratio of Rhodamine 6G is obtained by means of 532 nm laser wavelength, which is in close proximity of the dye's absorption maximum. Closely packed, gap-filled self-assembled monolayers of silver nanoparticles were produced to observe the Raman signals of Rhodamine 6G. Two mechanisms contribute to detect the Raman signals of the fluorescent sample: surface-enhanced Raman scattering (SERS) and nanomaterial surface energy transfer (NSET). Self-assembled monolayers of silver nanoparticles with different coverage densities and also those filled with probe molecules were prepared through variations of the substrate's immersion time in a nanoparticle solution and drying the substrate, respectively. Examination of the effects of these two factors on the plasmonic response and SERS efficiency of the substrate revealed that in a gap-filled dense coverage, near-field interactions dominate, which remarkably increase the Raman-to-fluorescence ratio (RFR). To have a perfect dense coverage, the efficient immersion time was obtained at about 48 h. Drying the substrates also caused further enhancement in RFR through filling interparticle spaces with dye molecules and, accordingly, an increase in NSET efficiency.

Critical assessment of enhancement factor measurements in surface-enhanced Raman scattering on different substrates

The SERS enhancement factor (SERS-EF) is one of the most important parameters that characterizes the ability of a given substrate to enhance the Raman signal for SERS applications. The comparison between dynamic and static substrates, however, should not be performed in sense of SERS-EF.

Nanomaterials for diagnosis: challenges and applications in smart devices based on molecular recognition

Clinical diagnosis has always been dependent on the efficient immobilization of biomolecules in solid matrices with preserved activity, but significant developments have taken place in recent years with the increasing control of molecular architecture in organized films. Of particular importance is the synergy achieved with distinct materials such as nanoparticles, antibodies, enzymes, and other nanostructures, forming structures organized on the nanoscale. In this review, emphasis will be placed on nanomaterials for biosensing based on molecular recognition, where the recognition element may be an enzyme, DNA, RNA, catalytic antibody, aptamer, and labeled biomolecule. All of these elements may be assembled in nanostructured films, whose layer-by-layer nature is essential for combining different properties in the same device. Sensing can be done with a number of optical, electrical, and electrochemical methods, which may also rely on nanostructures for enhanced performance, as is the case of reporting nanoparticles in bioelectronics devices. The successful design of such devices requires investigation of interface properties of functionalized surfaces, for which a variety of experimental and theoretical methods have been used. Because diagnosis involves the acquisition of large amounts of data, statistical and computational methods are now in widespread use, and one may envisage an integrated expert system where information from different sources may be mined to generate the diagnostics.

Vibrational spectroscopy for probing molecular-level interactions in organic films mimicking biointerfaces

Investigation into nanostructured organic films has served many purposes, including the design of functionalized surfaces that may be applied in biomedical devices and tissue engineering and for studying physiological processes depending on the interaction with cell membranes. Of particular relevance are Langmuir monolayers, Langmuir-Blodgett (LB) and layer-by-layer (LbL) films used to simulate biological interfaces. In this review, we shall focus on the use of vibrational spectroscopy methods to probe molecular-level interactions at biomimetic interfaces, with special emphasis on three surface-specific techniques, namely sum frequency generation (SFG), polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) and surface-enhanced Raman scattering (SERS). The two types of systems selected for exemplifying the potential of the methods are the cell membrane models and the functionalized surfaces with biomolecules. Examples will be given on how SFG and PM-IRRAS can be combined to determine the effects from biomolecules on cell membrane models, which include determination of the orientation and preservation of secondary structure. Crucial information for the action of biomolecules on model membranes has also been obtained with PM-IRRAS, as is the case of chitosan removing proteins from the membrane. SERS will be shown as promising for enabling detection limits down to the single-molecule level. The strengths and limitations of these methods will also be discussed, in addition to the prospects for the near future.