Aluminum flame temperature measurements in solid propellant combustion

High-speed visible supercontinuum laser absorption spectroscopy of metal oxides

Supercontinuum laser absorption spectroscopy is applied to energetic material combustion fireball environments using the visible spectrum for temperature and column density measurements of key metal combustion intermediates TiO and AlO. Fireballs are produced by igniting metal/ammonium perchlorate powder beds on a thermal-jump apparatus. This work marks, to our knowledge, the first quantitative absorption measurement of TiO (B²Π_r-X²Δ_r, Δv=0) and demonstrates the feasibility of broadband visible metal-oxide absorption thermometry at rates up to 100 kHz. We also demonstrate the capability for single laser-shot absorption measurements. The mean AlO (B²Σ⁺-X²Σ⁺, Δv=0) temperature is 3010 K, whereas TiO has a mean temperature of 2095 K; both agree well with previous literature. Typical signal-to-noise ratios for the TiO and AlO absorption spectra are 22. The 100 kHz measurement rate reveals the time dynamics of titanium combustion-illustrating the potential for broadband multispecies monitoring in dynamic fireball environments.

Emissivity Characteristics of Hydrocarbon Flame and Temperature Measurement by Color Image Processing

Non-gray radiation should be considered in the temperature and emissivity measurements of hydrocarbon flames. In this paper an improved ratio pyrometry by spectral analysis and color image processing is proposed. A Newton-type iterative method is utilized to analyze the spectrometer signals for the detection of monochromatic emissivity, and then the ratio pyrometry based on color image processing is corrected by the detected monochromatic emissivity without making approximations of the filter profiles of CCD camera. The experiments were conducted on a tubular heating furnace with coal gas and a propane flame. The spectral and spatial distributions of emissivity of hydrocarbon flame were detected, and the temperature measurement results at four conditions coincided with the thermocouple with relative errors less than 8.34%. The soot volume fractions in the turbulent diffusion hydrocarbon flame were approximately estimated from the detected emissivity, and are influenced by the O/C in the combustion. This study will provide a simple and effective method for the detection of non-gray radiation of hydrocarbon flames in the combustion industry.