A tobacco etch virus protease with increased substrate tolerance at the P1' position

P1' specificity of the S219V/R203G mutant tobacco etch virus protease

Proteases that recognize linear amino acid sequences with high specificity became indispensable tools of recombinant protein technology for the removal of various fusion tags. Due to its stringent sequence specificity, the catalytic domain of the nuclear inclusion cysteine protease of tobacco etch virus (TEV PR) is also a widely applied reagent for enzymatic removal of fusion tags. For this reason, efforts have been made to improve its stability and modify its specificity. For example, P1' autoproteolytic cleavage-resistant mutant (S219V) TEV PR was found not only to be nearly impervious to self-inactivation, but also exhibited greater stability and catalytic efficiency than the wild-type enzyme. An R203G substitution has been reported to further relax the P1' specificity of the enzyme, however, these results were obtained from crude intracellular assays. Until now, there has been no rigorous comparison of the P1' specificity of the S219V and S219V/R203G mutants in vitro, under carefully controlled conditions. Here, we compare the P1' amino acid preferences of these single and double TEV PR mutants. The in vitro analysis was performed by using recombinant protein substrates representing 20 P1' variants of the consensus TENLYFQ*SGT cleavage site, and synthetic oligopeptide substrates were also applied to study a limited set of the most preferred variants. In addition, the enzyme-substrate interactions were analyzed in silico. The results indicate highly similar P1' preferences for both enzymes, many side-chains can be accommodated by the S1' binding sites, but the kinetic assays revealed lower catalytic efficiency for the S219V/R203G than for the S219V mutant.

Structural study for substrate recognition of human N-terminal glutamine amidohydrolase 1 in the arginine N-degron pathway

The N-degron pathway determines the half-life of proteins by selectively destabilizing the proteins bearing N-degrons. N-terminal glutamine amidohydrolase 1 (NTAQ1) plays an essential role in the arginine N-degron (Arg/N-degron) pathway as an initializing enzyme via the deamidation of the N-terminal (Nt) glutamine (Gln). However, the Nt-serine-bound conformation of hNTAQ1 according to the previously identified crystal structure suggests the possibility of other factors influencing the recognition of Nt residues by hNTAQ1. Hence, in the current study, we aimed to further elucidate the substrate recognition of hNTAQ1; specifically, we explored 12 different substrate-binding conformations of hNTAQ1 depending on the subsequent residue of Nt-Gln. Results revealed that hNTAQ1 primarily interacts with the protein Nt backbone, instead of the side chain, for substrate recognition. Here, we report that the Nt backbone of proteins appears to be a key component of hNTAQ1 function and is the main determinant of substrate recognition. Moreover, not all second residues from Nt-Gln, but rather distinctive and charged residues, appeared to aid in detecting substrate recognition. These new findings define the substrate-recognition process of hNTAQ1 and emphasize the importance of the subsequent Gln residue in the Nt-Gln degradation system. Our extensive structural and biochemical analyses provide insights into the substrate specificity of the N-degron pathway and shed light on the mechanism underlying hNTAQ1 substrate recognition. An improved understanding of the protein degradation machinery could aid in developing therapies to promote overall health through enhanced protein regulation, such as targeted protein therapies.

Proteins that carry dual targeting signals can act as tethers between peroxisomes and partner organelles

Peroxisomes are organelles with crucial functions in oxidative metabolism. To correctly target to peroxisomes, proteins require specialized targeting signals. A mystery in the field is the sorting of proteins that carry a targeting signal for peroxisomes and as well as for other organelles, such as mitochondria or the endoplasmic reticulum (ER). Exploring several of these proteins in fungal model systems, we observed that they can act as tethers bridging organelles together to create contact sites. We show that in Saccharomyces cerevisiae this mode of tethering involves the peroxisome import machinery, the ER-mitochondria encounter structure (ERMES) at mitochondria and the guided entry of tail-anchored proteins (GET) pathway at the ER. Our findings introduce a previously unexplored concept of how dual affinity proteins can regulate organelle attachment and communication.

Engineering of TEV protease variants with redesigned substrate specificity

Due to their ability to catalytically cleave proteins and peptides, proteases present unique opportunities for the use in industrial, biotechnological, and therapeutic applications. Engineered proteases with redesigned substrate specificities have the potential to expand the scope of practical applications of this enzyme class. We here apply a combinatorial protease engineering-based screening method that links proteolytic activity to the solubility and correct folding of a fluorescent reporter protein to redesign the substrate specificity of tobacco etch virus (TEV) protease. The target substrate EKLVFQA differs at three out of seven positions from the TEV consensus substrate sequence. Flow cytometric sorting of a semi-rational TEV protease library, consisting of focused mutations of the substrate binding pockets as well as random mutations throughout the enzyme, led to the enrichment of a set of protease variants that recognize and cleave the novel target substrate.

C-terminal sequence stability profiling in Saccharomyces cerevisiae reveals protective protein quality control pathways

Protein quality control (PQC) mechanisms are essential for degradation of misfolded or dysfunctional proteins. An essential part of protein homeostasis is recognition of defective proteins by PQC components and their elimination by the ubiquitin-proteasome system, often concentrating on protein termini as indicators of protein integrity. Changes in amino acid composition of C-terminal ends arise through protein disintegration, alternative splicing, or during the translation step of protein synthesis from premature termination or translational stop-codon read-through. We characterized reporter protein stability using light-controlled exposure of the random C-terminal peptide collection (CtPC) in budding yeast revealing stabilizing and destabilizing features of amino acids at positions -5 to -1 of the C terminus. The (de)stabilization properties of CtPC-degrons depend on amino acid identity, position, as well as composition of the C-terminal sequence and are transferable. Evolutionary pressure toward stable proteins in yeast is evidenced by amino acid residues under-represented in cytosolic and nuclear proteins at corresponding C-terminal positions, but over-represented in unstable CtPC-degrons, and vice versa. Furthermore, analysis of translational stop-codon read-through peptides suggested that such extended proteins have destabilizing C termini. PQC pathways targeting CtPC-degrons involved the ubiquitin-protein ligase Doa10 and the cullin-RING E3 ligase SCFDas1 (Skp1-Cullin-F-box protein). Overall, our data suggest a proteome protection mechanism that targets proteins with unnatural C termini by recognizing a surprisingly large number of C-terminal sequence variants.

Polyprotein synthesis: a journey from the traditional pre-translational method to modern post-translational approaches for single-molecule force spectroscopy

Polyproteins, an array of protein units of similar or differential functions in tandem, have been extensively utilized by organisms, unicellular or multicellular, as concentrators of the myriad of molecular activities. Most eukaryotic proteins, two-thirds in unicellular organisms, and more than 80% in metazoans, are polyproteins. Although the use of polyproteins continues to evolve in nature, our understanding of the structure-function-property of polyproteins is still limited. Cumbersome recombinant strategies and the lack of convenient in vitro synthetic routes of polyproteins have been rate-determining factors in the progress. However, in this review we have discussed the revolutionary journey of polyprotein synthesis with a major focus on surface-based structure-function-property studies, especially using force spectroscopy at the single-molecule level.

Production of a 135-residue long N-truncated human keratinocyte growth factor 1 in Escherichia coli

BACKGROUND

Palifermin (trade name Kepivance®) is an amino-terminally truncated recombinant human keratinocyte growth factor 1 (KGF-1) with 140 residues that has been produced using Escherichia coli to prevent and treat oral mucositis following radiation or chemotherapy. In this study, an amino-terminally shortened KGF-1 variant with 135 residues was produced and purified in E. coli, and its cell proliferation activity was evaluated.

RESULTS

We expressed soluble KGF-1 fused to thioredoxin (TRX) in the cytoplasmic fraction of E. coli to improve its production yield. However, three N-truncated forms (KGF-1 with 140, 138, and 135 residues) were observed after the removal of the TRX protein from the fusion form by cleavage of the human enterokinase light chain C112S (hEK_L C112S). The shortest KGF-1 variant, with 135 residues, was expressed by fusion with TRX via the hEK_L cleavage site in E. coli and purified at high purity (> 99%). Circular dichroism spectroscopy shows that purified KGF-1₁₃₅ had a structure similar to that of the KGF-1₁₄₀ as a random coiled form, and MCF-7 cell proliferation assays demonstrate its biological activity.

CONCLUSIONS

We identified variations in N-terminus-truncated KGF-1 and selected the most stable form. Furthermore, by a simple two-step purification, highly purified KGF-1₁₃₅ was obtained that showed biological activity. These results demonstrate that KGF-1₁₃₅ may be considered an alternative protein to KGF-1.

Reprogramming the Cleavage Specificity of Botulinum Neurotoxin Serotype B1

Proteases with reprogrammed specificity for nonnative substrates are highly desired in synthetic biology and biomedicine. However, generating reprogrammed proteases that are orthogonal and highly specific for a new target has been a major challenge. In this work, we sought to expand the versatility of protease systems by engineering an orthogonal botulinum neurotoxin serotype B (BoNT/B) protease that recognizes an orthogonal substrate. We designed and validated an orthogonal BoNT/B protease system in mammalian cells, combining mutations in the protease with compensatory mutations in the protease substrate and incorporating a truncated target sequence and then demonstrated use of this orthogonal BoNT/B protease-substrate combination to regulate complex transcriptional circuitry in mammalian cells. Transposing this platform into yeast, we demonstrated utility of this approach for in vivo protease evolution. We tested this platform with the newly designed orthogonal protease and then used it in a high-throughput screen to identify novel orthogonal protease/protease substrate combinations. While carrying out this work, we also generated new cleavage reporters that could be used to report botulinum toxin protease activity in mammalian cells using simple fluorescent readouts. We envision that these approaches will expand the applications of botulinum protease in new directions and aid in the development of new reprogrammed proteases.

Making the cut with protease engineering

Proteases cut with enviable precision and regulate diverse molecular events in biology. Such qualities drive a seemingly inexhaustible appetite for proteases with new activities and capabilities. Comprising 25% of the total industrial enzyme market, proteases appear in consumer goods, such as detergents, textile processing, and numerous foods; additionally, proteases include 25 US Food and Drug Administration-approved medicines and various research tools. Recent advances in protease engineering strategies address target specificity, catalytic efficiency, and stability. This guide to protease engineering surveys best practices and emerging strategies. We further highlight gaps and flexibilities inherent to each system that suggest opportunities for new technology development along with engineered proteases to solve challenges in proteomics, protein sequencing, and synthetic gene circuits.

Development of a Bio-Layer Interferometry-Based Protease Assay Using HIV-1 Protease as a Model

Proteolytic enzymes have great significance in medicine and the pharmaceutical industry and are applied in multiple fields of life sciences. Therefore, cost-efficient, reliable and sensitive real-time monitoring methods are highly desirable to measure protease activity. In this paper, we describe the development of a new experimental approach for investigation of proteolytic enzymes. The method was designed by the combination of recombinant fusion protein substrates and bio-layer interferometry (BLI). The protease (PR) of human immunodeficiency virus type 1 (HIV-1) was applied as model enzyme to set up and test the method. The principle of the assay is that the recombinant protein substrates immobilized to the surface of biosensor are specifically cleaved by the PR, and the substrate processing can be followed by measuring change in the layer thickness by optical measurement. We successfully used this method to detect the HIV-1 PR activity in real time, and the initial rate of the signal decrease was found to be proportional to the enzyme activity. Substrates representing wild-type and modified cleavage sites were designed to study HIV-1 PR's specificity, and the BLI-based measurements showed differential cleavage efficiency of the substrates, which was proven by enzyme kinetic measurements. We applied this BLI-based assay to experimentally confirm the existence of extended binding sites at the surface of HIV-1 PR. We found the measurements may be performed using lysates of cells expressing the fusion protein, without primary purification of the substrate. The designed BLI-based protease assay is high-throughput-compatible and enables real-time and small-volume measurements, thus providing a new and versatile approach to study proteolytic enzymes.

Phage-assisted evolution of botulinum neurotoxin proteases with reprogrammed specificity

Although bespoke, sequence-specific proteases have the potential to advance biotechnology and medicine, generation of proteases with tailor-made cleavage specificities remains a major challenge. We developed a phage-assisted protease evolution system with simultaneous positive and negative selection and applied it to three botulinum neurotoxin (BoNT) light-chain proteases. We evolved BoNT/X protease into separate variants that preferentially cleave vesicle-associated membrane protein 4 (VAMP4) and Ykt6, evolved BoNT/F protease to selectively cleave the non-native substrate VAMP7, and evolved BoNT/E protease to cleave phosphatase and tensin homolog (PTEN) but not any natural BoNT protease substrate in neurons. The evolved proteases display large changes in specificity (218- to >11,000,000-fold) and can retain their ability to form holotoxins that self-deliver into primary neurons. These findings establish a versatile platform for reprogramming proteases to selectively cleave new targets of therapeutic interest.

YESS 2.0, a Tunable Platform for Enzyme Evolution, Yields Highly Active TEV Protease Variants

Here we describe YESS 2.0, a highly versatile version of the yeast endoplasmic sequestration screening (YESS) system suitable for engineering and characterizing protein/peptide modifying enzymes such as proteases with desired new activities. By incorporating features that modulate gene transcription as well as substrate and enzyme spatial sequestration, YESS 2.0 achieves a significantly higher operational and dynamic range compared with the original YESS. To showcase the new advantages of YESS 2.0, we improved an already efficient TEV protease variant (TEV-EAV) to obtain a variant (eTEV) with a 2.25-fold higher catalytic efficiency, derived almost entirely from an increase in turnover rate (k_cat). In our analysis, eTEV specifically digests a fusion protein in 2 h at a low 1:200 enzyme to substrate ratio. Structural modeling indicates that the increase in catalytic efficiency of eTEV is likely due to an enhanced interaction between the catalytic Cys151 with the P1 substrate residue (Gln). Furthermore, the modeling showed that the ENLYFQS peptide substrate is buried to a larger extent in the active site of eTEV compared with WT TEV. The new eTEV variant is functionally the fastest TEV variant reported to date and could potentially improve efficiency in any TEV application.

Optogenetic Downregulation of Protein Levels with an Ultrasensitive Switch

Optogenetic control of protein activity is a versatile technique to gain control over cellular processes, for example, for biomedical and biotechnological applications. Among other techniques, the regulation of protein abundance by controlling either transcription or protein stability found common use as this controls the activity of any type of target protein. Here, we report modules of an improved variant of the photosensitive degron module and a light-sensitive transcription factor, which we compared to doxycycline-dependent transcriptional control. Given their modularity the combined control of synthesis and stability of a given target protein resulted in the synergistic down regulation of its abundance by light. This combined module exhibits very high switching ratios, profound downregulation of protein abundance at low light-fluxes, and fast protein depletion kinetics. Overall, this synergistic optogenetic multistep control (SOMCo) module is easy to implement and results in a regulation of protein abundance superior to each individual component.

High-level production of N-terminal pro-brain natriuretic peptide, as a calibrant of heart failure diagnosis, in Escherichia coli

Heart failure (HF) is a coronary disease that affects people worldwide and has a high mortality rate. N-terminal pro-brain natriuretic peptide (NT-proBNP) has been proven to be a useful and accurate biomarker for diagnosing systolic HF. Here, we report a strategy for the high-level production of recombinant (r)NT-proBNP in Escherichia coli. An Fh8 tag with six histidines was fused to the N terminus of NT-proBNP along with the recognition site of tobacco etch virus (TEV) protease; the 6HFh8-NT-proBNP fusion peptide was expressed in flask cultures of E. coli in almost completely soluble form. The peptide was purified by HisTrap affinity chromatography, and the N-terminal tag was cleaved by TEV protease. After a second round of HisTrap affinity chromatography to remove the TEV protease and N-terminal tag, rNT-proBNP was isolated with high purity (≥ 98%) by carboxymethyl cation exchange chromatography. The final yield of purified rNT-proBNP (97.5 mg/l of bacterial culture; 3.25 mg/g of wet cell) was 55-fold higher than that reported in previous studies (0.5-1.75 mg/l of bacterial culture). Furthermore, the high cell density E. coli fed-batch culture enabled high-level production of rNT-proBNP in the order of grams per liter. The purified rNT-proBNP was detected by enzyme-linked immunosorbent assay and chemiluminescence enzyme immunoassay using commercial monoclonal antibodies recognizing different epitopes, showing a linear dose-response relationship in the range of tested concentrations (slope = 3.58 and r² = 0.995). These results demonstrate the efficiency of our process for mass producing (gram-to-liter level) rNT-proBNP with acceptable analytical performance.

Multiple domains of bacterial and human Lon proteases define substrate selectivity

The Lon protease selectively degrades abnormal proteins or certain normal proteins in response to environmental and cellular conditions in many prokaryotic and eukaryotic organisms. However, the mechanism(s) behind the substrate selection of normal proteins remains largely unknown. In this study, we identified 10 new substrates of F. tularensis Lon from a total of 21 candidate substrates identified in our previous work, the largest number of novel Lon substrates from a single study. Cross-species degradation of these and other known Lon substrates revealed that human Lon is unable to degrade many bacterial Lon substrates, suggestive of a “organism-adapted” substrate selection mechanism for the natural Lon variants. However, individually replacing the N, A, and P domains of human Lon with the counterparts of bacterial Lon did not enable the human protease to degrade the same bacterial Lon substrates. This result showed that the “organism-adapted” substrate selection depends on multiple domains of the Lon proteases. Further in vitro proteolysis and mass spectrometry analysis revealed a similar substrate cleavage pattern between the bacterial and human Lon variants, which was exemplified by predominant representation of leucine, alanine, and other hydrophobic amino acids at the P(−1) site within the substrates. These observations suggest that the Lon proteases select their substrates at least in part by fine structural matching with the proteins in the same organisms.

Proteasome Activity Is Influenced by the HECT_2 Protein Ipa1 in Budding Yeast

The ubiquitin-proteasome system (UPS) controls cellular functions by maintenance of a functional proteome and degradation of key regulatory proteins. Central to the UPS is the proteasome that adjusts the abundance of numerous proteins, thereby safeguarding their activity or initiating regulatory events. Here, we demonstrate that the essential Saccharomyces cerevisiae protein Yjr141w/Ipa1 (Important for cleavage and PolyAdenylation) belongs to the HECT_2 (homologous to E6-AP carboxyl terminus_2) family. We found that five cysteine residues within the HECT_2 family signature and the C-terminus are essential for Ipa1 activity. Furthermore, Ipa1 interacts with several ubiquitin-conjugating enzymes in vivo and localizes to the cytosol and nucleus. Importantly, Ipa1 has an impact on proteasome activity, which is indicated by the activation of the Rpn4 regulon as well as by decreased turnover of destabilized proteasome substrates in an IPA1 mutant. These changes in proteasome activity might be connected to reduced maturation or modification of proteasomal core particle proteins. Our results highlight the influence of Ipa1 on the UPS. The conservation within the HECT_2 family and the connection of the human HECT_2 family member to an age-related degeneration disease might suggest that HECT_2 family members share a conserved function linked to proteasome activity.

Engineering peptide ligase specificity by proteomic identification of ligation sites

Enzyme-catalyzed peptide ligation is a powerful tool for site-specific protein bioconjugation, but stringent enzyme–substrate specificity limits its utility. Here, we present an approach for comprehensive characterization of peptide ligase specificity for N termini using proteome-derived peptide libraries. We used this strategy to characterize the ligation efficiency for >25,000 enzyme–substrate pairs in the context of the engineered peptide ligase subtiligase and identified a family of 72 mutant subtiligases with activity toward N-terminal sequences that were previously recalcitrant to modification. We applied these mutants individually for site-specific bioconjugation of purified proteins including antibodies, and in algorithmically selected combinations for sequencing of the cellular N terminome with reduced sequence bias. We also developed a web application to enable algorithmic selection of the most efficient subtiligase variant(s) for bioconjugation to user-defined sequences. These studies provide a new toolbox of enzymes for site-specific protein modification and a general approach for rapidly defining and engineering peptide ligase specificity.

Phage-assisted continuous evolution of proteases with altered substrate specificity

Here we perform phage-assisted continuous evolution (PACE) of TEV protease, which canonically cleaves ENLYFQS, to cleave a very different target sequence, HPLVGHM, that is present in human IL-23. A protease emerging from ∼2500 generations of PACE contains 20 non-silent mutations, cleaves human IL-23 at the target peptide bond, and when pre-mixed with IL-23 in primary cultures of murine splenocytes inhibits IL-23-mediated immune signaling. We characterize the substrate specificity of this evolved enzyme, revealing shifted and broadened specificity changes at the six positions in which the target amino acid sequence differed. Mutational dissection and additional protease specificity profiling reveal the molecular basis of some of these changes. This work establishes the capability of changing the substrate specificity of a protease at many positions in a practical time scale and provides a foundation for the development of custom proteases that catalytically alter or destroy target proteins for biotechnological and therapeutic applications.Proteases are promising therapeutics to treat diseases such as hemophilia which are due to endogenous protease deficiency. Here the authors use phage-assisted continuous evolution to evolve a variant TEV protease with altered target peptide sequence specificities.

Development of a Synthetic Switch to Control Protein Stability in Eukaryotic Cells with Light

In eukaryotic cells, virtually all regulatory processes are influenced by proteolysis. Thus, synthetic control of protein stability is a powerful approach to influence cellular behavior. To achieve this, selected target proteins are modified with a conditional degradation sequence (degron) that responds to a distinct signal. For development of a synthetic degron, an appropriate sensor domain is fused with a degron such that activity of the degron is under control of the sensor. This chapter describes the development of a light-activated, synthetic degron in the model organism Saccharomyces cerevisiae. This photosensitive degron module is composed of the light-oxygen-voltage (LOV) 2 photoreceptor domain of Arabidopsis thaliana phototropin 1 and a degron derived from murine ornithine decarboxylase (ODC). Excitation of the photoreceptor with blue light induces a conformational change that leads to exposure and activation of the degron. Subsequently, the protein is targeted for degradation by the proteasome. Here, the strategy for degron module development and optimization is described in detail together with experimental aspects, which were pivotal for successful implementation of light-controlled proteolysis. The engineering of the photosensitive degron (psd) module may well serve as a blueprint for future development of sophisticated synthetic switches.

In Vivo Reporters for Protein Half-Life

Determination of the general capacity of proteolytic activity of a certain cell or tissue type can be crucial for an assessment of various features of an organism's growth and development and also for the optimization of biotechnological applications. Here, we describe the use of chimeric protein stability reporters that can be detected by standard laboratory techniques such as histological staining, selection using selective media or fluorescence microscopy. Dependent on the expression of the reporters due to the promoters applied, cell- and tissue-specific questions can be addressed. Here, we concentrate on methods which can be used for large-scale screening for protein stability changes rather than for detailed protein stability studies.

Emerging technologies for protease engineering: New tools to clear out disease

Proteases regulate many biological processes through their ability to activate or inactive their target substrates. Because proteases catalytically turnover proteins and peptides, they present unique opportunities for use in biotechnological and therapeutic applications. However, many proteases are capable of cleaving multiple physiological substrates. Therefore their activity, expression, and localization are tightly controlled to prevent unwanted proteolysis. Currently, the use of protease therapeutics has been limited to a handful of proteases with narrow substrate specificities, which naturally limits their toxicity. Wider application of proteases is contingent upon the development of methods for engineering protease selectivity, activity, and stability. Recent advances in the development of high-throughput, bacterial and yeast-based methods for protease redesign have yielded protease variants with novel specificities, reduced toxicity, and increased resistance to inhibitors. Here, we highlight new tools for protease engineering, including methods suitable for the redesign of human secreted proteases, and future opportunities to exploit the catalytic activity of proteases for therapeutic benefit. Biotechnol. Bioeng. 2017;114: 33-38. © 2016 Wiley Periodicals, Inc.

Tobacco Etch Virus protease: A shortcut across biotechnologies

About thirty years ago, studies on the RNA genome of Tobacco Etch Virus revealed the presence of an efficient and specific protease, called Tobacco Etch Virus protease (TEVp), that was part of the Nuclear Inclusion a (NIa) enzyme. TEVp is an efficient and specific protease of 27kDa that has become a valuable biotechnological tool. Nowadays TEVp is a unique endopeptidase largely exploited in biotechnology from industrial applications to in vitro and in vivo cellular studies. A number of TEVp mutants with different rate of cleavage, stability and specificity have been reported. Similarly, a panel of different target cleavage sites, derived from the canonical ENLYFQ-G/S site, has been established. In this review we describe these aspects of TEVp and some of its multiple applications. A particular focus is on the use and molecular biology of TEVp in living cells and organisms.

Generation of Artificial N-end Rule Substrate Proteins In Vivo and In Vitro

In order to determine the stability of a protein or protein fragment dependent on its N-terminal amino acid, and therefore relate its half-life to the N-end rule pathway of targeted protein degradation (NERD), non-Methionine (Met) amino acids need to be exposed at their amino terminal in most cases. Per definition, at this position, destabilizing residues are generally unlikely to occur without further posttranslational modification of immature (pre-)proproteins. Moreover, almost exclusively, stabilizing, or not per se destabilizing residues are N-terminally exposed upon Met excision by Met aminopeptidases. To date, there exist two prominent protocols to study the impact of destabilizing residues at the N-terminal of a given protein by selectively exposing the amino acid residue to be tested. Such proteins can be used to study NERD substrate candidates and analyze NERD enzymatic components. Namely, the well-established ubiquitin fusion technique (UFT) is used in vivo or in cell-free transcription/translation systems in vitro to produce a desired N-terminal residue in a protein of interest, whereas the proteolytic cleavage of recombinant fusion proteins by tobacco etch virus (TEV) protease is used in vitro to purify proteins with distinct N-termini. Here, we discuss how to accomplish in vivo and in vitro expression and modification of NERD substrate proteins that may be used as stability tester or activity reporter proteins and to characterize potential NERD substrates.The methods to generate artificial substrates via UFT or TEV cleavage are described here and can be used either in vivo in the context of stably transformed plants and cell culture expressing chimeric constructs or in vitro in cell-free systems such as rabbit reticulocyte lysate as well as after expression and purification of recombinant proteins from various hosts.

Simultaneous selection and counter-selection for the directed evolution of proteases in E. coli using a cytoplasmic anchoring strategy

With the goal of generating new enzymes that can cleave custom sequences, this article describes a selection strategy for evolving proteases with desirable characteristics. Positive selection and counter-selection are combined to select for and against specified cleavage sequences simultaneously. Cleavage of the positive selection sequence permits E. coli growth, and cleavage of the counter-selection sequence slows growth. Growth occurs when cleavage of the positive selection sequence releases β-lactamase into the periplasm where it can confer antibiotic resistance. The counter-selection traps β-lactamase in the cytoplasm, preventing antibiotic resistance and growth. Thus, proteases with a preference for the positive selection sequence relative to the counter-selection sequence grow more rapidly. This system was used to select a tobacco etch virus (TEV) protease mutant with new substrate compatibility. Biotechnol. Bioeng. 2016;113: 1187-1193. © 2015 Wiley Periodicals, Inc.

The Xenopus laevis Atg4B Protease: Insights into Substrate Recognition and Application for Tag Removal from Proteins Expressed in Pro- and Eukaryotic Hosts

During autophagy, members of the ubiquitin-like Atg8 protein family get conjugated to phosphatidylethanolamine and act as protein-recruiting scaffolds on the autophagosomal membrane. The Atg4 protease produces mature Atg8 from C-terminally extended precursors and deconjugates lipid-bound Atg8. We now found that Xenopus laevis Atg4B (xAtg4B) is ideally suited for proteolytic removal of N-terminal tags from recombinant proteins. To implement this strategy, an Atg8 cleavage module is inserted in between tag and target protein. An optimized xAtg4B protease fragment includes the so far uncharacterized C-terminus, which crucially contributes to recognition of the Xenopus Atg8 homologs xLC3B and xGATE16. xAtg4B-mediated tag cleavage is very robust in solution or on-column, efficient at 4°C and orthogonal to TEV protease and the recently introduced proteases bdSENP1, bdNEDP1 and xUsp2. Importantly, xLC3B fusions are stable in wheat germ extract or when expressed in Saccharomyces cerevisiae, but cleavable by xAtg4B during or following purification. We also found that fusions to the bdNEDP1 substrate bdNEDD8 are stable in S. cerevisiae. In combination, or findings now provide a system, where proteins and complexes fused to xLC3B or bdNEDD8 can be expressed in a eukaryotic host and purified by successive affinity capture and proteolytic release steps.

Seven novel modulators of the analgesic target NaV 1.7 uncovered using a high-throughput venom-based discovery approach

BACKGROUND AND PURPOSE

Chronic pain is a serious worldwide health issue, with current analgesics having limited efficacy and dose-limiting side effects. Humans with loss-of-function mutations in the voltage-gated sodium channel NaV 1.7 (hNaV 1.7) are indifferent to pain, making hNaV 1.7 a promising target for analgesic development. Since spider venoms are replete with NaV channel modulators, we examined their potential as a source of hNaV 1.7 inhibitors.

EXPERIMENTAL APPROACH

We developed a high-throughput fluorescent-based assay to screen spider venoms against hNaV 1.7 and isolate 'hit' peptides. To examine the binding site of these peptides, we constructed a panel of chimeric channels in which the S3b-S4 paddle motif from each voltage sensor domain of hNaV 1.7 was transplanted into the homotetrameric KV 2.1 channel.

KEY RESULTS

We screened 205 spider venoms and found that 40% contain at least one inhibitor of hNaV 1.7. By deconvoluting 'hit' venoms, we discovered seven novel members of the NaSpTx family 1. One of these peptides, Hd1a (peptide μ-TRTX-Hd1a from venom of the spider Haplopelma doriae), inhibited hNaV 1.7 with a high level of selectivity over all other subtypes, except hNaV 1.1. We showed that Hd1a is a gating modifier that inhibits hNaV 1.7 by interacting with the S3b-S4 paddle motif in channel domain II. The structure of Hd1a, determined using heteronuclear NMR, contains an inhibitor cystine knot motif that is likely to confer high levels of chemical, thermal and biological stability.

CONCLUSION AND IMPLICATIONS

Our data indicate that spider venoms are a rich natural source of hNaV 1.7 inhibitors that might be useful leads for the development of novel analgesics.

Photo-sensitive degron variants for tuning protein stability by light

Background

Regulated proteolysis by the proteasome is one of the fundamental mechanisms used in eukaryotic cells to control cellular behavior. Efficient tools to regulate protein stability offer synthetic influence on molecular level on a selected biological process. Optogenetic control of protein stability has been achieved with the photo-sensitive degron (psd) module. This engineered tool consists of the photoreceptor domain light oxygen voltage 2 (LOV2) from Arabidopsis thaliana phototropin1 fused to a sequence that induces direct proteasomal degradation, which was derived from the carboxy-terminal degron of murine ornithine decarboxylase. The abundance of target proteins tagged with the psd module can be regulated by blue light if the degradation tag is exposed to the cytoplasm or the nucleus.

Results

We used the model organism Saccharomyces cerevisiae to generate psd module variants with increased and decreased stabilities in darkness or when exposed to blue light using site-specific and random mutagenesis. The variants were characterized as fusions to fluorescent reporter proteins and showed half-lives between 6 and 75 minutes in cells exposed to blue light and 14 to 187 minutes in darkness. In blue light, ten variants showed accelerated degradation and four variants increased stability compared to the original psd module. Measuring the dark/light ratio of selected constructs in yeast cells showed that two variants were obtained with ratios twice as high as in the wild type psd module. In silico modeling of photoreceptor variant characteristics suggested that for most cases alterations in behavior were induced by changes in the light-response of the LOV2 domain.

Conclusions

In total, the mutational analysis resulted in psd module variants, which provide tuning of protein stability over a broad range by blue light. Two variants showed characteristics that are profoundly improved compared to the original construct. The modular usage of the LOV2 domain in optogenetic tools allows the usage of the mutants in the context of other applications in synthetic and systems biology as well.

Electronic supplementary material

The online version of this article (doi:10.1186/s12918-014-0128-9) contains supplementary material, which is available to authorized users.