Selection and characterization of biofuel-producing environmental bacteria isolated from vegetable oil-rich wastes

Sequencing analysis and efficient biodiesel production by lipase from Pseudomonas aeruginosa

BACKGROUND

Recently, lipase processing for biodiesel production has shown a global increase as it is considered a potential alternative clean-fuel source. The current study's objective is to investigate of lipolytic activity of lipase produced from different strains of Pseudomonas aeruginosa (P. aeruginosa) in biodiesel production using edible plant oils. The goal is to develop an efficient and cost-effective method for producing inexpensive and environmentally friendly biodiesel.

METHODS AND RESULTS

Four P. aeruginosa isolates were obtained from different environmental sources (soil), phenotypically identified, and it was confirmed by the PCR detection of the 16SrRNA gene. The isolated P. aeruginosa strains were screened for lipase production, and the recovered lipase was purified. Besides, the lipase (lip) gene was detected by PCR, and the purified PCR products were sequenced and analyzed. The production of biofuel was conducted using gas chromatography among tested oils. It was found that castor oil was the best one that enhances lipase production in-vitro.

Engineering the Metabolic Landscape of Microorganisms for Lignocellulosic Conversion

Bacteria and yeast are being intensively used to produce biofuels and high-added-value products by using plant biomass derivatives as substrates. The number of microorganisms available for industrial processes is increasing thanks to biotechnological improvements to enhance their productivity and yield through microbial metabolic engineering and laboratory evolution. This is allowing the traditional industrial processes for biofuel production, which included multiple steps, to be improved through the consolidation of single-step processes, reducing the time of the global process, and increasing the yield and operational conditions in terms of the desired products. Engineered microorganisms are now capable of using feedstocks that they were unable to process before their modification, opening broader possibilities for establishing new markets in places where biomass is available. This review discusses metabolic engineering approaches that have been used to improve the microbial processing of biomass to convert the plant feedstock into fuels. Metabolically engineered microorganisms (MEMs) such as bacteria, yeasts, and microalgae are described, highlighting their performance and the biotechnological tools that were used to modify them. Finally, some examples of patents related to the MEMs are mentioned in order to contextualize their current industrial use.

Biodiesel Is Dead: Long Life to Advanced Biofuels—A Comprehensive Critical Review

Many countries are immersed in several strategies to reduce the carbon dioxide (CO2) emissions of internal combustion engines. One option is the substitution of these engines by electric and/or hydrogen engines. However, apart from the strategic and logistical difficulties associated with this change, the application of electric or hydrogen engines in heavy transport, e.g., trucks, shipping, and aircrafts, also presents technological difficulties in the short-medium term. In addition, the replacement of the current car fleet will take decades. This is why the use of biofuels is presented as the only viable alternative to diminishing CO2 emissions in the very near future. Nowadays, it is assumed that vegetable oils will be the main raw material for replacing fossil fuels in diesel engines. In this context, it has also been assumed that the reduction in the viscosity of straight vegetable oils (SVO) must be performed through a transesterification reaction with methanol in order to obtain the mixture of fatty acid methyl esters (FAMEs) that constitute biodiesel. Nevertheless, the complexity in the industrial production of this biofuel, mainly due to the costs of eliminating the glycerol produced, has caused a significant delay in the energy transition. For this reason, several advanced biofuels that avoid the glycerol production and exhibit similar properties to fossil diesel have been developed. In this way, “green diesels” have emerged as products of different processes, such as the cracking or pyrolysis of vegetable oil, as well as catalytic (hydro)cracking. In addition, some biodiesel-like biofuels, such as Gliperol (DMC-Biod) or Ecodiesel, as well as straight vegetable oils, in blends with plant-based sources with low viscosity have been described as renewable biofuels capable of performing in combustion ignition engines. After evaluating the research carried out in the last decades, it can be concluded that green diesel and biodiesel-like biofuels could constitute the main alternative to addressing the energy transition, although green diesel will be the principal option in aviation fuel.

An arsRB resistance operon confers tolerance to arsenite in the environmental isolate Terribacillus sp. AE2B 122

Terribacillus sp. AE2B 122 is an environmental strain isolated from olive-oil agroindustry wastes. This strain displays resistance to arsenic, one of the most ubiquitous carcinogens found in nature. Terribacillus sp. AE2B 122 possesses an unusual ars operon, consisting of the transcriptional regulator (arsR) and arsenite efflux pump (arsB) but no adjacent arsenate reductase (arsC) locus. Expression of arsR and arsB was induced when Terribacillus was exposed to sub-lethal concentrations of arsenate. Heterologous expression of the arsB homologue in Escherichia coli∆arsRBC demonstrated that it conferred resistance to arsenite and reduced the accumulation of arsenic inside the cells. Two members of the arsC-like family (Te3384 and Te2854) found in the Terribacillus genome were not induced by arsenic, but their heterologous expression in E. coli ∆arsC and ∆arsRBC increased the accumulation of arsenic in both strains. We found that both Te3384 and Te2854 slightly increased resistance to arsenate in E. coli ∆arsC and ∆arsRBC, possibly by chelation of arsenic or by increasing the resistance to oxidative stress. Finally, arsenic speciation assays suggest that Terribacillus is incapable of arsenate reduction, in agreement with the lack of an arsC homologue in the genome.

Biodiesel at the Crossroads: A Critical Review

The delay in the energy transition, focused in the replacement of fossil diesel with biodiesel, is mainly caused by the need of reducing the costs associated to the transesterification reaction of vegetable oils with methanol. This reaction, on an industrial scale, presents several problems associated with the glycerol generated during the process. The costs to eliminate this glycerol have to be added to the implicit cost of using seed oil as raw material. Recently, several alternative methods to convert vegetable oils into high quality diesel fuels, which avoid the glycerol generation, are being under development, such as Gliperol, DMC-Biod, or Ecodiesel. Besides, there are renewable diesel fuels known as “green diesel”, obtained by several catalytic processes (cracking or pyrolysis, hydrodeoxygenation and hydrotreating) of vegetable oils and which exhibit a lot of similarities with fossil fuels. Likewise, it has also been addressed as a novel strategy, the use of straight vegetable oils in blends with various plant-based sources such as alcohols, vegetable oils, and several organic compounds that are renewable and biodegradable. These plant-based sources are capable of achieving the effective reduction of the viscosity of the blends, allowing their use in combustion ignition engines. The aim of this review is to evaluate the real possibilities that conventional biodiesel has in order to success as the main biofuel for the energy transition, as well as the use of alternative biofuels that can take part in the energy transition in a successful way.

Evaluation of Lipases from Wild Microbial Strains as Biocatalysts in Biodiesel Production

In this study, the evaluation of the catalytic behavior of several wild bacterial strains in the 1,3-selective ethanolysis of triglycerides with ethanol to produce a new type of biodiesel (Ecodiesel) that integrates glycerol as monoacylglycerols was carried out. The Ecodiesel production not only avoids the elimination of glycerol, which is largely generated as a by-product in the biodiesel industry, but also results in an increase in the biofuel yield. The wild microbial strain samples were obtained from several lipophilic organisms. In addition to evaluate the enzymatic extracts, the minimum grade of purification of the strains, necessary to obtain similar results to those attained with commercial lipases was studied. This purification treatment included a dialysis followed by a lyophilization process. Such extracts were directly used as biocatalysts in the transesterification reaction of sunflower oil with ethanol, attaining much better results (yield close to 100%) than those obtained with strains which were not submitted to the purification process (yields lower than 10%). Furthermore, the results here obtained are similar to those obtained with commercial lipases but were achieved under mild conditions and lower reaction time (2 h). In addition, the stability of the enzymatic extracts was corroborated by subsequent reactions, showing no loss of activity. Thus, this study brings to light that enzymatic extracts obtained by a very simple purification process can be economically competitive with the conventional biodiesel production methods.

Application of Enzymatic Extracts from a CALB Standard Strain as Biocatalyst within the Context of Conventional Biodiesel Production Optimization

The application of biocatalysts in the transesterification process of triglycerides (TG) allows integrating the glycerol in the form of monoglyceride (MG), sharply increasing the yield and the environmental sustainability of the conventional biodiesel production process. This is known as Ecodiesel. To overcome the inconvenient of the high cost of the currently employed highly purified commercial enzymes, the use of scarcely purified extracts obtained from standard strains of the same species of commercial lipases currently applied in this process is being investigated. Thus, Candida antarctica type B (CALB) was chosen to determine the optimal conditions of culture of this yeast. The standard strain was obtained from the Spanish Type Microbial Cultures Collection (CECT) and has been used to carry out several studies to elucidate its optimum growth conditions. Through a process of lyophilization with prior dialysis of the liquid cultures, the enzymatic extracts were obtained. The different obtained cultures have been applied as biocatalysts in the 1,3-selective transesterification reaction of sunflower oil with ethanol to obtain Ecodiesel (FAEE + MG). Selectivity and reaction yields were obtained by gas chromatography. Acceptable yields are obtained during the reaction time as well as in successive reactions, demonstrating the feasibility of using these CALB enzymatic extracts as biocatalysts.

A Straightforward Access to New Families of Lipophilic Polyphenols by Using Lipolytic Bacteria

The chemical synthesis of new lipophilic polyphenols with improved properties presents technical difficulties. Here we describe the selection, isolation and identification of lipolytic bacteria from food-processing industrial wastes, and their use for tailoring a new set of compounds with great interest in the food industry. These bacteria were employed to produce lipolytic supernatants, which were applied without further purification as biocatalysts in the chemoselective and regioselective synthesis of lipophilic partially acetylated phenolic compounds derived from olive polyphenols. The chemoselectivity of polyphenols acylation/deacylation was analyzed, revealing the preference of the lipases for phenolic hydroxyl groups and phenolic esters. In addition, the alcoholysis of peracetylated 3,4-dihydroxyphenylglycol resulted in a series of lipophilic 2-alkoxy-2-(3,4-dihydroxyphenyl)ethyl acetate through an unexpected lipase-mediated etherification at the benzylic position. These new compounds are more lipophilic and retained their antioxidant properties. This approach can provide access to unprecedented derivatives of 3,4-dihydroxyphenylglycol with improved properties.

Bacterial community analysis of an industrial wastewater treatment plant in Colombia with screening for lipid-degrading microorganisms

The operation of wastewater treatment technologies depends on a combination of physical, chemical and biological factors. Microorganisms present in wastewater treatment plants play essential roles in the degradation and removal of organic waste and xenobiotic pollutants. Several microorganisms have been used in complementary treatments to process effluents rich in fats and oils. Microbial lipases have received significant industrial attention because of their stability, broad substrate specificity, high yields, and regular supply, as well as the fact that the microorganisms producing them grow rapidly on inexpensive media. In Colombia, bacterial community studies have focused on populations of cultivable nitrifying, heterotrophic and nitrogen-fixing bacteria present in constructed wetlands. In this study, culture-dependent methods, culture-independent methods (TTGE, RISA) and enzymatic methods were used to estimate bacterial diversity, to monitor temporal and spatial changes in bacterial communities, and to screen microorganisms that presented lipolytic activity. The dominant microorganisms in the Wastewater Treatment Plant (WWTP) examined in this study belonged to the phyla Firmicutes, Proteobacteria and Bacteroidetes. The enzymatic studies performed indicated that five bacterial isolates and three fungal isolates possessed the ability to degrade lipids; additionally, the Serratia, Kosakonia and Mucor genera presented lipase-mediated transesterification activity. The implications of these findings in regard to possible applications are discussed later in this paper. Our results indicate that there is a wide diversity of aerobic Gram-negative bacteria inhabiting the different sections of the WWTP, which could indicate its ecological condition, functioning and general efficiency.

Energetic assessment of fixation of CO2 and subsequent biofuel production using B. cereus SM1 isolated from sewage treatment plant

The ongoing work on global warming resulting from green house gases (GHGs) has led to explore the possibility of bacterial strains which can fix carbon dioxide (CO2) and can generate value-added products. The present work is an effort in this direction and has carried out an exhaustive batch experiments for the fixation of CO2 using B. Cereus SM1 isolated from sewage treatment plant (STP). The work has incorporated 5-day batch run for gaseous phase inlet CO2 concentration of 13 ± 1 % (%v/v). 84.6 (±5.76) % of CO2 removal was obtained in the gaseous phase at mentioned CO2 concentration (%v/v). Energetic requirement for CO2 fixation was assessed by varying Fe[II] ion concentration (0-200 ppm) on the per-day basis. The cell lysate obtained from CO2 fixation studies (Fe[II] ion = 100 ppm) was analyzed using Fourier transformation infrared spectroscopy (FTIR) and gas chromatography-mass spectroscopy (GC-MS). This analysis confirmed the presence of fatty acids and hydrocarbon as valuable products. The hydrocarbons were found in the range of C11-C22 which is equivalent to light oil. The obtained fatty acids were found in the range of C11-C19. The possibility of fatty acid conversion to biodiesel was explored by carrying out the transesterification reaction. The yield of biodiesel was obtained as 86.5 (±0.048) % under the transesterification reaction conditions. Results of this research work can provide the valuable information in the implementation of biomitigation of CO2 at real scenario.