Improved protocol for rapid identification of certain spa types using high resolution melting curve analysis

The European Union Summary Report on Antimicrobial Resistance in zoonotic and indicator bacteria from humans, animals and food in 2019-2020

Data on antimicrobial resistance (AMR) in zoonotic and indicator bacteria from humans, animals and food are collected annually by the EU Member States (MSs), jointly analysed by the EFSA and the ECDC and reported in a yearly EU Summary Report. The annual monitoring of AMR in animals and food within the EU is targeted at selected animal species corresponding to the reporting year. The 2020 monitoring specifically focussed on poultry and their derived carcases/meat, while the monitoring performed in 2019 specifically focused on fattening pigs and calves under 1 year of age, as well as their derived carcases/meat. Monitoring and reporting of AMR in 2019-2020 included data regarding Salmonella, Campylobacter and indicator E. coli isolates, as well as data obtained from the specific monitoring of presumptive ESBL-/AmpC-/carbapenemase-producing E. coli isolates. Additionally, some MSs reported voluntary data on the occurrence of methicillin-resistant Staphylococcus aureus in animals and food, with some countries also providing data on antimicrobial susceptibility. This report provides an overview of the main findings of the 2019-2020 harmonised AMR monitoring in the main food-producing animal populations monitored, in carcase/meat samples and in humans. Where available, monitoring data obtained from pigs, calves, broilers, laying hens and turkeys, as well as from carcase/meat samples and humans were combined and compared at the EU level, with particular emphasis on multidrug resistance, complete susceptibility and combined resistance patterns to critically important antimicrobials, as well as Salmonella and E. coli isolates possessing ESBL-/AmpC-/carbapenemase phenotypes. The key outcome indicators for AMR in food-producing animals, such as complete susceptibility to the harmonised panel of antimicrobials in E. coli and the prevalence of ESBL-/AmpC-producing E. coli have been specifically analysed over the period 2014-2020.

Sequencing Independent Molecular Typing of Staphylococcus aureus Isolates: Approach for Infection Control and Clonal Characterization

Staphylococcus aureus is a major bacterial human pathogen that causes a wide variety of clinical manifestations. The main aim of the presented study was to determine and optimize a novel sequencing independent approach that enables molecular typing of S. aureus isolates and elucidates the transmission of emergent clones between patients. In total, 987 S. aureus isolates including both methicillin-resistant S. aureus (MRSA) and methicillin-sensitive S. aureus (MSSA) isolates were used to evaluate the novel typing approach combining high-resolution melting (HRM) analysis of multilocus sequence typing (MLST) genes (mini-MLST) and spa gene (spa-HRM). The novel approach's discriminatory ability was evaluated by whole-genome sequencing (WGS). The clonal relatedness of tested isolates was set by the BURP and BURST approach using spa and MLST data, respectively. Mini-MLST classified the S. aureus isolates into 38 clusters, followed by spa-HRM classifying the isolates into 101 clusters. The WGS proved HRM-based methods to effectively differentiate between related S. aureus isolates. Visualizing evolutionary relationships among different spa-types provided by the BURP algorithm showed comparable results to MLST/mini-MLST clonal clusters. We proved that the combination of mini-MLST and spa-HRM is rapid, reproducible, and cost-efficient. In addition to high discriminatory ability, the correlation between spa evolutionary relationships and mini-MLST clustering allows the variability in population structure to be monitored. IMPORTANCE Rapid and cost-effective molecular typing tools for Staphylococcus aureus epidemiological applications such as transmission tracking, source attribution and outbreak investigations are highly desirable. High-resolution melting based methods are effective alternative to those based on sequencing. Their good reproducibility and easy performance allow prospective typing of large set of isolates while reaching great discriminatory power. In this study, we established a new epidemiological approach to S. aureus typing. This scheme has the potential to greatly improve epidemiological investigations of S. aureus.

The European Union Summary Report on Antimicrobial Resistance in zoonotic and indicator bacteria from humans, animals and food in 2018/2019

Data on antimicrobial resistance (AMR) in zoonotic and indicator bacteria from humans, animals and food are collected annually by the EU Member States (MSs), jointly analysed by the EFSA and the ECDC and reported in a yearly EU Summary Report. The annual monitoring of AMR in animals and food within the EU is targeted at selected animal species corresponding to the reporting year. The 2018 monitoring specifically focussed on poultry and their derived carcases/meat, while the monitoring performed in 2019 specifically focused on pigs and calves under 1 year of age, as well as their derived carcases/meat. Monitoring and reporting of AMR in 2018/2019 included data regarding Salmonella, Campylobacter and indicator Escherichia coli isolates, as well as data obtained from the specific monitoring of presumptive ESBL-/AmpC-/carbapenemase-producing E. coli isolates. Additionally, some MSs reported voluntary data on the occurrence of meticillin-resistant Staphylococcus aureus in animals and food, with some countries also providing data on antimicrobial susceptibility. This report provides an overview of the main findings of the 2018/2019 harmonised AMR monitoring in the main food-producing animal populations monitored, in related carcase/meat samples and in humans. Where available, data monitoring obtained from pigs, calves, broilers, laying hens and turkeys, as well as from carcase/meat samples and humans were combined and compared at the EU level, with particular emphasis on multidrug resistance, complete susceptibility and combined resistance patterns to critically important antimicrobials, as well as Salmonella and E. coli isolates possessing ESBL-/AmpC-/carbapenemase phenotypes. The outcome indicators for AMR in food-producing animals such as complete susceptibility to the harmonised panel of antimicrobials in E. coli and the prevalence of ESBL-/AmpC-producing E. coli have been also specifically analysed over the period 2015-2019.

Evaluation of high-resolution melting analysis for spa-typing of methicillin-resistant and -susceptible Staphylococcus aureus isolates

Molecular characterization of Staphylococcus aureus isolates from nosocomial and community-acquired infections using accurate, reproducible, and rapid typing methods is essential for the fast identification of prevalent and epidemic strains. Although sequence-based spa typing is highly effective, PCR-based techniques (such as high-resolution melting curve analysis, HRM) are simpler, less expensive, faster, and can be performed in a single and closed-tube assay format, thereby reducing the risk of contamination. A total of 51 methicillin-resistant S. aureus (MRSA) (n = 26) and methicillin-sensitive S. aureus (MSSA) (n = 25) isolates from Karaj (n = 10) and Yasuj (n = 41), Iran, were subjected to HRM. All selected isolates were identified by the standard spa-typing method. Among the 51 tested isolates, 11 genotype profiles were distinguished from 12 spa types. Strains t1077 and t1816 exhibited the highest and lowest melting temperatures (81.8°C and 79.4°C), with 46.7% and 39.8% G + C contents, respectively. Strains t706 and t1816, with almost identical G + C contents, had the same HRM genotypes, but their curves differed due to different G + C distributions. Four standard spa types (strains t030, t037, t701 and t5598) were differentiated correctly and their melting temperatures were 81.2°C, 81.4°C, 80.4°C and 80.1°C, respectively. We demonstrated that HRM profiling is a rapid method which enables the accurate screening of certain strains (especially the endemic ones), and may be used for bacterial surveillance. However, it cannot replace sequence-based spa typing, especially for newly emerging spa types, and therefore cannot be used as a standardized global method.

Differentiation of Community-Associated and Livestock-Associated Methicillin-Resistant Staphylococcus aureus Isolates and Identification of spa Types by Use of PCR and High-Resolution Melt Curve Analysis

Infections due to methicillin-resistant Staphylococcus aureus (MRSA) are present worldwide and represent a major public health concern. The capability of PCR followed by high-resolution melt (HRM) curve analysis for the detection of community-associated and livestock-associated MRSA strains and the identification of staphylococcal protein A (spa) locus was evaluated in 74 MRSA samples which were isolated from the environment, humans, and pigs on a single piggery. PCR-HRM curve analysis identified four spa types among MRSA samples and differentiated MRSA strains accordingly. A nonsubjective differentiation model was developed according to genetic confidence percentage values produced by tested samples, which did not require visual interpretation of HRM curve results. The test was carried out at different settings, and result data were reanalyzed and confirmed with DNA sequencing. PCR-HRM curve analysis proved to be a robust and reliable test for spa typing and can be used as a tool in epidemiological studies.

Characterization of SCCmec, Spa Types and Multidrug Resistant of Methicillin-Resistant Staphylococcus aureus Isolates in Ahvaz, Iran

Background

Methicillin-resistant Staphylococcus aureus (MRSA) is one of the most pathogens associated with health care. Molecular typing methods are vital for outbreak investigations of MRSA. The aim of this study was characterization of SCCmec, spa types and multidrug resistant of methicillin-resistant Staphylococcus aureus isolates in Ahvaz, Iran.

Methods

A total of 50 MRSA isolates were determined by using the phenotypic method and mecA gene. Antibiotic resistance profile and SCCmec types were screened using disc diffusion method and PCR, respectively. For spa typing of MRSA isolates, two molecular typing methods including the PCR-sequencing and high-resolution melting (HRM) analysis were used.

Results

In the present study, the highest sensitivity of MRSA was to vancomycin and linezolid and the lowest to clindamycin. In the MRSA isolates, 22% were XDR and 78% were MDR. SCCmec type III was found commonly among MRSA. Based on PCR-sequencing and HRM results, 10 different spa types were identified. The spa types t037 and t030 were the most common in this study.

Conclusion

This study emphasizes the spa variation among MRSA isolates, which may be considered as an important criterion when treating staphylococcal infections. Accurate and early detection of MDR, XDR, or even PDR MRSA isolates strains must be commenced by all clinical microbiology laboratories to reduce the menace of antimicrobial resistance.

EasyPrimer: user-friendly tool for pan-PCR/HRM primers design. Development of an HRM protocol on wzi gene for fast Klebsiella pneumoniae typing

In this work we present EasyPrimer, a user-friendly online tool developed to assist pan-PCR and High Resolution Melting (HRM) primer design. The tool finds the most suitable regions for primer design in a gene alignment and returns a clear graphical representation of their positions on the consensus sequence. EasyPrimer is particularly useful in difficult contexts, e.g. on gene alignments of hundreds of sequences and/or on highly variable genes. HRM analysis is an emerging method for fast and cost saving bacterial typing and an HRM scheme of six primer pairs on five Multi-Locus Sequence Type (MLST) genes is already available for Klebsiella pneumoniae. We validated the tool designing a scheme of two HRM primer pairs on the hypervariable gene wzi of Klebsiella pneumoniae and compared the two schemes. The wzi scheme resulted to have a discriminatory power comparable to the HRM MLST scheme, using only one third of primer pairs. Then we successfully used the wzi HRM primer scheme to reconstruct a Klebsiella pneumoniae nosocomial outbreak in few hours. The use of hypervariable genes reduces the number of HRM primer pairs required for bacterial typing allowing to perform cost saving, large-scale surveillance programs.

Real-time PCR followed by high-resolution melting analysis - a new robust approach to evaluate SCCmec typing of methicillin-resistant Staphylococcus aureus

AIM

We designed a novel approach based on real-time PCR followed by high-resolution melting (HRM) analysis to determine the Staphylococcal cassette chromosome mec (SCCmec) types of methicillin-resistant Staphylococcus aureus  strains, which we compared against the results of conventional multiplex PCR SCCmec typing.

METHODS

Multiplex PCR (for ccr and mec gene complexes) was carried out as conventional method. The HRM analysis was then designed using standard strains of each SCCmec type.

RESULTS

The M-PCR results included types III (33.33%), IV (43.33%) and V (23.33%). HRM analysis was able to distinguish all five types, which were used to set up the protocol with a sensitivity and specificity of 100% compared with the conventional method.

CONCLUSION

This novel method for SCCmec typing has high specificity and sensitivity and can be conducted in a shorter period of time at lower costs.

The spa typing of methicillin-resistant Staphylococcus aureus isolates by High Resolution Melting (HRM) analysis

Molecular typing is an important tool for control and prevention of infection. A suitable molecular typing method for epidemiological investigation must be easy to perform, highly reproducible, inexpensive, rapid and easy to interpret. In this study, two molecular typing methods including the conventional PCR-sequencing method and high resolution melting (HRM) analysis were used for staphylococcal protein A (spa) typing of 30 Methicillin-resistant Staphylococcus aureus (MRSA) isolates recovered from clinical samples. Based on PCR-sequencing method results, 16 different spa types were identified among the 30 MRSA isolates. Among the 16 different spa types, 14 spa types separated by HRM method. Two spa types including t4718 and t2894 were not separated from each other. According to our results, spa typing based on HRM analysis method is very rapid, easy to perform and cost-effective, but this method must be standardized for different regions, spa types, and real-time machinery.