Adsorption and desorption of nickel(II) ions from aqueous solution by a lignocellulose/montmorillonite nanocomposite

Evidencing nickel biosorption capacity of cyanobacteria Chroococcidiopsis sp.: potential metallo-protective agents

The increasing prevalence of toxic elements such as nickel (Ni) in the environment poses a significant threat to human health due to its carcinogenic effect. The study investigates the Ni biosorption potential of three cyanobacteria strains: Euhalothece sp., Halospira sp., and Chroococcidiopsis sp. Hence, the physicochemical properties of biomass and extract were assessed through transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and Brunauer-Emmet-Teller (BET). Batch experiments for Ni2⁺ biosorption were conducted and residual nickel (Ni2⁺) levels were quantitatively assessed using Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES). The results evidence interesting Ni2⁺ removal efficiency of Chroococcidiopsis sp. biomass reaching a biosorption capacity of 18.19 mg g-1 under pH 6, and 37 °C. Several functional groups including amide, carbonyl, phosphate, and carboxyl groups were revealed as key players in this process via FTIR. Finally, such findings highlight the significant potential of cyanobacterial biomass and by-products to reduce nickel bioavailability to prevent Ni-induced carcinogenesis.

Optimization of simultaneous adsorption of nickel, copper, cadmium and zinc from sulfuric solutions using weakly acidic resins

In this research, the adsorption of nickel (Ni), copper (Cu), cadmium (Cd), and zinc (Zn) from real sulfuric leaching solution with weakly acidic resins has been studied using response surface methodology (RSM). The adsorption process on two weakly acidic resins has been investigated as a function of pH, time, temperature, and resin dosage. The experimental results indicate that the amino phosphoric acid resin removed Ni, Cu, Cd, and Zn from an acidic solution very efficiently. Based on the central composite design (CCD) on the RSM, the statistical criteria of correlation coefficient (R2) values of Ni, Cu, Cd, and Zn are 0.9418, 0.9753, 0.9657, and 0.9189, respectively. The adsorption process followed the pseudo-second-order kinetic model and the thermodynamic calculations indicated the chemical interaction between the resin surface and the metal ions. Enthalpy values greater than zero indicate that the adsorption reaction of the metals is endothermic. The optimal adsorption process was carried out at time of 20 min, temperature of 30 0C, pH of 5, and resin dosage of 4 g/L. In these conditions, the adsorption capacity of nickel, copper, cadmium, and zinc were obtained 13.408, 7.087, 4.357, and 15.040 mg/g, respectively.

Black Tea Waste as Green Adsorbent for Nitrate Removal from Aqueous Solutions

The aim of the study was to prepare effective low-cost green adsorbents based on spent black tea leaves for the removal of nitrate ions from aqueous solutions. These adsorbents were obtained either by thermally treating spent tea to produce biochar (UBT-TT), or by employing the untreated tea waste (UBT) to obtain convenient bio-sorbents. The adsorbents were characterized before and after adsorption by Scanning Electron Microscopy (SEM), Energy Dispersed X-ray analysis (EDX), Infrared Spectroscopy (FTIR), and Thermal Gravimetric Analysis (TGA). The experimental conditions, such as pH, temperature, and nitrate ions concentration were studied to evaluate the interaction of nitrates with adsorbents and the potential of the adsorbents for the nitrate removal from synthetic solutions. The Langmuir, Freundlich and Temkin isotherms were applied to derive the adsorption parameters based on the obtained data. The maximum adsorption intakes for UBT and UBT-TT were 59.44 mg/g and 61.425 mg/g, respectively. The data obtained from this study were best fitted to the Freundlich adsorption isotherm applied to equilibrium (the values R² = 0.9431 for UBT and R² = 0.9414 for UBT-TT), this assuming the multi-layer adsorption onto a surface with a finite number of sites. The Freundlich isotherm model could explain the adsorption mechanism. These results indicated that UBT and UBT-TT could serve as novel biowaste and low-cost materials for the removal of nitrate ions from aqueous solutions.

Electrochemical detection of selected heavy metals in water: a case study of African experiences

The safety of water resources throughout the globe has been compromised by various human activities and climate change over the last decades. Consequently, the world is currently confronted with a severe shortage of water supply and a water safety crisis, amidst a growing population. With poor environmental regulations, indiscriminate budding of urban slums, poverty, and a lack of basic knowledge of hygiene and sanitation, the African water supply has been critically threatened by different organic and inorganic contaminants, which results in several health issues. Inorganic pollutants such as heavy metals are particularly of interest because they are mostly stable and non-biodegradable. Therefore, they are not easily removed from water. In different parts of the continent, the concentration of heavy metals in drinking water far exceeds the permissible level recommended by the World Health Organization (WHO). Worse still, this problem is expected to increase with growing population, industrialization, urbanization, and, of course, corruption of government and local officials. Most of the African population is ignorant of the standards of safe water. In addition, the populace lack access to affordable and reliable technologies and tools that could be used in the quantification of these pollutants. This problem is not only applicable to domestic, but also to commercial, communal, and industrial water sources. Hence, a global campaign has been launched to ensure constant assessment of the presence of these metals in the environment and to promote awareness of dangers associated with unsafe exposure to them. Various conventional spectroscopic heavy metal detection techniques have been used with great success across the world. However, such techniques suffer from some obvious setbacks, such as the cost of procurement and professionalism required to operate them, which have limited their applications. This paper, therefore, reviews the condition of African water sources, health implications of exposure to heavy metals, and the approaches explored by various indigenous electrochemists, to provide a fast, affordable, sensitive, selective, and stable electrochemical sensors for the quantification of the most significant heavy metals in our water bodies.

Investigation of clay brick waste for the removal of copper, nickel and iron from aqueous solution: batch and fixed - bed column studies

The adsorption of copper, iron and nickel ions from an aqueous solution using Makoro granite clay brick waste through batch and fixed – bed column modes was investigated. The adsorbent was characterised using X-Ray Fluorescence, X-Ray Diffraction (XRD), Thermogravimetric Analysis, and Scanning Electron Microscopy (SEM). XRD results revealed crystalline peaks of Quartz (51.28 %) and mullite (23.40%) in fresh and loaded adsorbent with unnotable changes before and after adsorption. SEM images indicate the presence of micro pores and irregularly distributed surfaces. Batch kinetic maximum adsorption capacities for iron, copper, and nickel are 7.60, 6.70 and 6.20 mg g⁻¹ media respectively with 60 min as the optimum time. The maximum adsorption capacities at adsorbent dosage of 5 g L⁻¹ were 10.0, 7.60 and 7.20 mg L⁻¹ for iron, copper and nickel ions. The corresponding adsorption capabilities from the fixed-bed column reactor were 2.23, 2.22 and 0.74 mg g⁻¹ media respectively. The thermodynamics parameters of enthalpy change (ΔH) were 5.21, 9.32 and 5.22 kJ mol⁻¹ respectively for Copper, iron and nickel ions and the corresponding entropy change (ΔS) were -0.04, -0.05 and -0.03 kJmol⁻¹K⁻¹respectively and the process being non-spontaneous and exothermic. Thomas and Yoon-Nelson models yielded similar low coefficient of determination (R²) values (0.06 and 0.07) for copper and iron ions. Further investigations such as the use of real wastewater, competition of anions and further media characterisation and modifications are recommended.

Assessment of the Possibilities for Removal of Ni (II) from Contaminated Water by Activated Carbon foam Derived from Treatment Products of RDF

Carbon foam is a sophisticated porous material with wide applications that depend on its structure, low density, thermal conductivity and electrical characteristics. This study deals with the preparation of carbon foam by the thermo-oxidative modification with HNO3 of mixtures containing different organic materials with appropriate chemical characteristics—furfural and tar pitch derived from RDF. Carbon foam is characterized by thermogravimetry, differential scanning calorimetry, elemental analysis, Raman spectroscopy, N2 sorption, infrared spectroscopy and scanning electron spectroscopy. The investigation of adsorption activity of carbon foam towards nickel (II) in water solution is carried out. Experimental results fit very well with the Langmuir adsorption model. The carbon foam, obtained from tar pitch derived from RDF and furfural, shows a high adsorption capacity towards nickel ions (203.67 mg/g). The high adsorption capacity could be explained by the properties of the adsorbent—moderately high surface area, micro-mesoporous texture and presence of oxygen-containing surface groups.

Fenton Degradation of Ofloxacin Using a Montmorillonite–Fe3O4 Composite

In this work, FeM composites consisting of montmorillonite and variable amounts of Fe3O4 were successfully synthesized via a facile co-precipitation process. They were characterized using X-ray photoelectron spectroscopy (XPS), a field emission scanning electron microscope (FESEM), energy-dispersive X-ray spectroscopy (EDX), a transmission electron microscope (TEM), N2 adsorption–desorption, and Fourier transform infrared spectroscopy (FTIR) techniques to explain the effect of Fe3O4 content on the physicochemical properties of the Fe3O4–montmorillonite (FeM) composites. The FeM composites were subsequently used as heterogeneous Fenton catalysts to activate green oxidant (H2O2) for the subsequent degradation of ofloxacin (OFL) antibiotic. The efficiency of the FeM composites was studied by varying various parameters of Fe3O4 loading on montmorillonite, catalyst dosage, initial solution pH, initial OFL concentration, different oxidants, H2O2 dosage, reaction temperature, inorganic salts, and solar irradiation. Under the conditions of 0.75 g/L FeM-10, 5 mL/L H2O2, and natural pH, almost 81% of 50 mg/L of OFL was degraded within 120 min in the dark, while total organic carbon (TOC) reduction was about 56%. Although FeM composites could be a promising heterogeneous catalyst for the activation of H2O2 to degrade organic pollutants, including OFL antibiotic, the FeM-10 composite shows a significant drop in efficiency after five cycles, which indicates that more studies to improve this weakness should be conducted.

Removal of Nickel from Aqueous Solutions by Natural Bentonites from Slovakia

In this study, the removal of nickel (Ni(II)) by adsorption from synthetically prepared solutions using natural bentonites (Lieskovec (L), Hliník nad Hronom (S), Jelšový Potok (JP), and Stará Kremnička (SK)) was investigated. All experiments were carried out under batch processing conditions, with the concentration of Ni(II), temperature, and time as the variables. The adsorption process was fast, approaching equilibrium within 30 min. The Langmuir maximum adsorption capacities of the four bentonite samples used were found to be 8.41, 12.24, 21.79, and 21.93 mg g^–1, respectively. The results best fitted the pseudo-second-order kinetic model, with constant rates in a range of 0.0948–0.3153 g mg^–1 min. The effect of temperature was investigated at temperatures of 20, 30, and 40 °C. Thermodynamic parameters, including standard enthalpy (ΔH⁰), Gibbs energy (ΔG⁰), and standard entropy (ΔS⁰), were calculated. The adsorption of Ni(II) by bentonite samples was an endothermic and spontaneous process. These results indicated that, of the bentonite samples used, the natural bentonites from JP and SK were most suitable for the removal of nickel from synthetically prepared solutions.

Selective removal of aluminum, nickel and chromium ions by polymeric resins and natural zeolite from anodic plating wastewater

Aluminum industry has been well-known for producing enormous volume of wastewater in high concentration of varied heavy metals and toxic substances with wide variation in pH. In this study, selective removal of aluminum, nickel and chromium by polymeric resins (Amberlite IR120, Lewatit TP207) and natural zeolite from aluminum anodic plating process wastewater in varying aluminum concentrations (~10-200 mg/L), very low pH (3-4) and high conductivity (5090-8540 µS/cm) was evaluated. The wastewater was collected from a factory producing aluminum profiles (Kayseri, Turkey) where anodic oxidation plating is applied. The affinity of adsorbents towards to metals was in order aluminum > nickel > chromium. The kinetic results revealed that sorption of heavy metals onto adsorbent obeys pseudo-second-order model. The experimental data fitted the best to modified Freundlich isotherm. Aluminum uptake by adsorbents was feasible, exothermic and spontaneous by Amberlite IR120 and Lewatit TP207; however, the reaction was endothermic for zeolite.

Biosorption of Co2+ Ions from Aqueous Solution by K2HPO4-Pretreated Duckweed Lemna gibba

The wastewater of the many industries that use divalent cobalt (Co2+)-containing compounds has elevated levels of this metal. Thus, novel technology is needed to efficiently remove Co2+ ions from aqueous solutions. Biosorption is a low-cost technique capable of removing heavy metals from contaminated water. This study aims to evaluate the performance of KH2PO4-pretreated Lemna gibba (PLEM) as a biosorbent of Co2+ in aqueous solutions tested under different conditions of pH, particle size, and initial Co2+ concentration. Kinetic, equilibrium, and thermodynamic studies were conducted. The capacity of biosorption increased with a greater initial Co2+ concentration and was optimal at pH 7.0 and with small-sized biosorbent particles (0.3–0.8 mm). The pseudo-second-order sorption model best describes the experimental data on Co2+ biosorption kinetics. The Sips and Redlich-Peterson isotherm models best predict the biosorption capacity at equilibrium. According to the thermodynamic study, biosorption of Co2+ was endothermic and spontaneous. The effect of pH on the biosorption/desorption of Co2+ suggests that electrostatic attraction is the main biosorption mechanism. SEM-EDX verified the presence of Co2+ on the surface of the pretreated-saturated biosorbent and the absence of the metal after desorption.

Enhanced heavy metal removal from an aqueous environment using an eco-friendly and sustainable adsorbent

Thiol-lignocellulose sodium bentonite (TLSB) nanocomposites can effectively remove heavy metals from aqueous solutions. TLSB was formed by using -SH group-modified lignocellulose as a raw material, which was intercalated into the interlayers of hierarchical sodium bentonite. Characterization of TLSB was then performed with BET, FTIR, XRD, TGA, PZC, SEM, and TEM analyses. The results indicated that thiol-lignocellulose molecules may have different influences on the physicochemical properties of sodium bentonite, and an intercalated-exfoliated structure was successfully formed. The TLSB nanocomposite was subsequently investigated to validate its adsorption and desorption capacities for the zinc subgroup ions Zn(II), Cd(II) and Hg(II). The optimum adsorption parameters were determined based on the TLSB nanocomposite dosage, concentration of zinc subgroup ions, solution pH, adsorption temperature and adsorption time. The results revealed that the maximum adsorption capacity onto TLSB was 357.29 mg/g for Zn(II), 458.32 mg/g for Cd(II) and 208.12 mg/g for Hg(II). The adsorption kinetics were explained by the pseudo-second-order model, and the adsorption isotherm conformed to the Langmuir model, implying that the dominant chemical adsorption mechanism on TLSB is monolayer coverage. Thermodynamic studies suggested that the adsorption is spontaneous and endothermic. Desorption and regeneration experiments revealed that TLSB could be desorbed with HCl to recover Zn(II) and Cd(II) and with HNO3 to recover Hg(II) after several consecutive adsorption/desorption cycles. The adsorption mechanism was investigated through FTIR, EDX and SEM, which demonstrated that the introduction of thiol groups improved the adsorption capacity. All of these results suggested that TLSB is an eco-friendly and sustainable adsorbent for the extraction of Zn(II), Cd(II) and Hg(II) ions in aqueous media.

A review: a comparison of different adsorbents for removal of Cr (VI), Cd (II) and Ni (II)

A review of the studies dealing with the removal of chromium, cadmium, and nickel ions with different adsorbents published in the literature between 2014 and 2018 is given in tabular form, along with the adsorption conditions, adsorption isotherm, and kinetic models applied by the authors to model the experimental data and adsorption capacities. The review focuses on the efficiency of ion removal.

Kinetic study of removal heavy metal from aqueous solution using the synthetic aluminum silicate

One of the problems that most affect humanity today is the wastewater discharge into different water bodies. It was estimated that more than 7 million tons of wastewater are generated worldwide and are discharged into rivers, lakes, and reservoirs. Among the most dangerous wastewaters are those from inorganic chemistry research laboratories, mainly due to heavy metals. These problems have become a highly relevant topic, and numerous researchers have tried to design wastewater treatment systems that will deal more efficiently with heavy metals elimination. In this work, the synthesis, characterization, and evaluation of hydrated aluminium silicate were performed as alternative wastewater treatment from chemistry research and teaching laboratories. The compound obtained was [Formula: see text], which was characterized by the determination of its physicochemical properties. These revealed a low density, very porous material, with low crystallinity, strong chemical resistance, a large surface area, and a high apparent ionic exchange capacity. Absorption kinetics studies of heavy metals in aqueous solutions, through more widespread models, have demonstrated that [Formula: see text] has excellent properties as absorbents of this material. The amorphous hydrated aluminium silicate achieves a decrease in the concentration of all the metal ions studied, reducing them to discharge levels permissible.

Biosorptive removal of acid orange 74 dye by HCl-pretreated Lemna sp

Acid orange 74 (AO74) is a chromium-complex monoazo acid dye widely used in the textile industry. Due to being highly toxic and non-biodegradable, it must be removed from polluted water to protect the health of people and the environment. The aim of this study was two-fold: to evaluate the biosorption of AO74 from an aqueous solution by utilizing HCl-pretreated Lemna sp. (HPL), and to examine dye desorption from the plant material. The maximum capacity of AO74 biosorption (64.24 mg g^-1) was reached after 4 h at the most adequate pH, which was 2. The biosorption capacity decreased 25% (to 48.18 mg g^-1) during the second biosorption/desorption cycle and remained essentially unchanged during the third cycle. The pseudo-second-order kinetics model concurred well with the experimental results of assays involving various levels of pH in the eluent solution and distinct initial concentrations of AO74. NaOH (0.01 M) was the best eluent solution. The Toth isotherm model best described AO74 biosorption equilibrium data. FTIR analysis confirmed the crucial role of HPL proteins in AO74 biosorption. SEM-EDX and CLSM techniques verified the effective biosorption/desorption of the dye during the three cycles. Therefore, HPL has potential for the removal of AO74 dye from wastewaters.

Nickel ion removal from aqueous solutions through the adsorption process: a review

Recently, removal of nickel ions has been gaining a lot of attention because of the negative impact of nickel ions on the environment. The aim of this review paper is to organize the scattered available information on removal of nickel ions from aqueous solutions through the adsorption process. Survey on investigated materials suggests that composite- and polymer-based adsorbents have the most effective capability for nickel adsorption. The composite material class, i.e. CaCO3-maltose, followed by biopolymer-based material showed the highest Ni(II) adsorption capacity of 769.23 and 500 mg/g, respectively. The importance of treatment parameters (i.e. pH, temperature, contact time, and metal ion concentration) is discussed, together with their effect on the underlying physicochemical phenomena, giving particular attention to the adsorption/desorption mechanism. It was ascertained that adsorption of nickel ions is pH dependent and the optimal pH range for adsorption of Ni(II) ions was in range of 6–8. In general, nickel adsorption is an endothermic and spontaneous process that mainly occurs by forming a monolayer on the adsorbent (experimental data are often fitted by Langmuir isotherms and pseudo-second-order kinetics). Regeneration (i.e. desorption) is also reviewed, suggesting that acidic eluents (e.g. HCl and HNO3) allow, in most of the cases, an efficacious spent adsorbent recovery. The percentage use of desorption agents followed the order of acids (77%) > chelators (8.5%) > alkalis (8%) > salts (4.5%) > water (2%). Helpful information about adsorption and desorption of nickel ions from aqueous solutions is provided.

Lignocellulose@ Activated Clay Nanocomposite with Hierarchical Nanostructure Enhancing the Removal of Aqueous Zn(II)

A lignocellulose@ activated clay (Ln@AC) nanocomposite with a hierarchical nanostructure was successfully synthesized by the chemical intercalation reaction and applied in the removal of Zn(II) from an aqueous solution. Ln@AC was characterized by N2 adsorption/desorption isotherms and X-Ray Diffraction (XRD), scanning Electron Microscope (SEM), transmission Electron Microscopy (TEM) and Fourier Transform Infrared Spectroscopy (FTIR) analysis, and the results indicate that an intercalated-exfoliated hierarchical nanostructure was formed. The effects of different adsorption parameters on the Zn(II) removal rate (weight ratio of Ln to AC, Ln@AC dosage, initial Zn(II) concentration, pH value, adsorption temperature, and time) were investigated in detail. The equilibrium adsorption capacity reached 315.9 mg/g under optimal conditions (i.e., the weight ratio of Ln to AC of 3:1, Ln@AC dosage of 1 g/L, initial Zn(II) concentration of 600 mg/L, pH value of 6.8, adsorption temperature of 65 °C, and adsorption time of 50 min). The adsorption process was described by the pseudo-second-order kinetic model, Langmuir isotherm model, and the Elovich model. Moreover, Zn(II) could be easily eluted by HCl, and the effects of HCl concentration, desorption temperature, and ultrasonic desorption time on desorbed amount were tested. Desorption studies revealed that with an HCl concentration of 0.25 mol/L, desorption temperature of 70 °C, and ultrasonic desorption time of 20 min, the maximum desorption capacity and efficiency were achieved at 202.5 mg/g and 64.10%, respectively. Regeneration experimental results indicated that the Ln@AC exhibited a certain recyclable regeneration performance. Due to such outstanding features, the novel Ln@AC nanocomposite proved to have great adsorption potential for Zn(II) removal from wastewater, and exhibited an extremely significant amount of adsorbed Zn(II) when compared to conventional adsorbents.

Removal of Heavy Metals and Metalloids from Water Using Drinking Water Treatment Residuals as Adsorbents: A Review

Heavy metal contamination is one of the most important environmental issues. Therefore, appropriate steps need to be taken to reduce heavy metals and metalloids in water to acceptable levels. Several treatment methods have been developed recently to adsorb these pollutants. This paper reviews the ability of residuals generated as a by-product from the water treatment plants to adsorb heavy metals and metalloids from water. Water treatment residuals have great sorption capacities due to their large specific surface area and chemical composition. Sorption capacity is also affected by sorption conditions. A survey of the literature shows that water treatment residuals may be a suitable material for developing an efficient adsorbent for the removal of heavy metals and metalloids from water.

Formation of Palygorskite Clay from Treated Diatomite and its Application for the Removal of Heavy Metals from Aqueous Solution

Environmental contamination by toxic heavy metals is a serious worldwide phenomenon. Thus, their removal is a crucial issue. In this study, we found an efficient adsorbent to remove Cu2+ and Ni2+ from aqueous solution using two materials. Chemical modification was used to obtain palygorskite clay from diatomite. The adsorbents were characterized using X-ray florescence, Fourier transform infrared spectroscopy and X-ray diffraction. The effects of contact time, initial concentration, temperature and pH on the adsorption process were investigated. Our results showed that the (%) of maximum adsorption capacity of diatomite was 78.44% for Cu2+ at pH 4 and 77.3% for Ni2+ at pH 7, while the (%) of the maximum adsorption on palygorskite reached 91% for Cu2+ and 87.05% for Ni2+, in the same condition. The results indicate that the pseudo-second-order model can describe the adsorption process. Furthermore, the adsorption isotherms could be adopted by the Langmuir and the Freundlich models with good correlation coefficient (R2). Thus, our results showed that palygorskite prepared from Tunisian diatomite is a good adsorbent for the removal of heavy metals from water.

Nano@lignocellulose intercalated montmorillonite as adsorbent for effective Mn(II) removal from aqueous solution

This paper describes the preparation of nano@lignocellulose (nano@LC) and a nano@lignocellulose/montmorillonite (nano@LC/MT) nanocomposite, as well as the capacity of the nano@LC/MT for adsorbing manganese ions from aqueous solution. The structure of nano@LC and nano@LC/MT was characterised by Fourier-transform infrared spectroscopy, X-ray diffraction, Scanning electron microscopy, and Transmission electron microscopy, which revealed that the diffraction peak of montmorillonite almost disappeared, infrared bands of the functional groups shifted, and morphology of the material changed after the formation of the composite. The optimum conditions for the adsorption of Mn(II) on the nano@LC/MT nanocomposite were investigated in detail by changing the initial Mn(II) concentration, pH, adsorption temperature, and time. The results revealed that the adsorption capacity of the nano@LC/MT nanocomposite for Mn(II) reached 628.0503 mg/g at a Mn(II) initial concentration of 900 mg/L, solution pH 5.8, adsorption temperature 55 °C, and adsorption time 160 min. Adsorption kinetics experiments revealed good agreement between the experimental data and the pseudo-second order kinetic model. The experimental data was satisfactorily fitted to the Langmuir isotherm. Adsorption-desorption results showed that nano@LC/MT exhibited excellent reusability. The adsorption mechanism was investigated through FT-IR and EDX spectroscopic analyses. The results suggested that nano@LC/MT have great potential in removing Mn(II) from water.

Assessment of addition of biochar to filtering mixtures for potential water pollutant removal

Green roofs are used increasingly to alleviate peaks of water discharge into the sewage systems in urban areas. Surface runoff from roofs contain pollutants from dry and wet deposition, and green roofs offer a possibility to reduce the amounts of pollutants in the water discharged from roofs by degradation and filtering. These pollutants would otherwise enter wastewater treatments plants and ultimately end up in sewage sludge that is spread on agricultural soils. The most common substrates used in green roofs have limited capacity for filtration and sorption. Also, more sustainable alternatives are sought, due to the high carbon footprint of these materials. Biochar is a carbon-rich material produced by pyrolysis of biomass, and several types of biochar have been described as good sorbents and filter materials. Biochar is also a light and carbon negative material, which may fulfill other desired criteria for new green roof substrates. We here report on an experiment where two types of biochar, produced from olive husks at 450 °C or from forest waste at 850 ° C were mixed with volcanic rock or peat, and tested for retention capacity of phenanthrene and six heavy metals in a column experiment with unsaturated gravimetric water flow lasting for 3 weeks. The results suggest that biochar as a component in green roof substrates perform better than traditional materials, concerning retention of the tested pollutants, and that different types of biochar have different properties in this respect.

Comparative efficacy of locally isolated fungal strains for Pb(II) removal and recovery from water

The present investigation aimed to study and compare the efficiency of non-viable fungal isolates to remove divalent lead (Pb(II)) from aqueous streams. The selected fungal isolates showed identity with Aspergillus caespitosus, Aureobasidium sp. RBSS-303 and Aspergillus flavus HF5 as confirmed using gene sequencing of ITS regions of the ribosomal DNA (rDNA). The obtained equilibrium data for Pb(II) biosorption of A. caespitosus fitted better to Langmuir isotherm with maximum sorption capacity of 351.0 mg/g and A. sp. RBSS-303 and A. flavus HF5 showed good fit to Freundlich isotherm with maximum sorption capacity of 271.5 and 346.3 mg/g respectively. The values of thermodynamic factors ascertained the nature of adsorption process is endothermic with A. caespitosus and A. flavus HF5 but exothermic with A. sp. RBSS-303. The experimental data for Pb(II) biosorption fits very well to pseudo second order kinetic model. With HCl the maximum 85.5, 75.3, 73.7% recovery of Pb(II) was obtained from A. caespitosus, A. sp. RBSS-303 and A. flavus HF5, respectively. The observed percentage loss in sorption capacity of Pb(II) was 3.9% by A. flavus HF5, 12.2% by A. caespitosus and 26.6% by A. sp. RBSS-303 after five cyclic studies of sorption and desorption. Results from the study confirmed the efficiency order of A. caespitosus > A. flavus HF5 > A. sp. RBSS-303 to remove and recover Pb(II) from aqueous solution. Finally, the fungal biosorbents can be used as soil conditioning agent after compositing into valuables fungal protein.

A Novel Nanocomposite as an Efficient Adsorbent for the Rapid Adsorption of Ni(II) from Aqueous Solution

A sulfhydryl-lignocellulose/montmorillonite (SLT) nanocomposite was prepared using a chemical intercalation reaction. The SLT nanocomposite was characterized by Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD), Scanning Electron Microscope (SEM), and Transmission Electron Microscopy (TEM), the results demonstrated that an intercalated-exfoliated nanostructure was formed in the SLT nanocomposite. Batch experiments were conducted to optimize parameters such as SLT nanocomposite dosage, the initial concentration of Ni(II), solution pH, temperature, and time. The results indicated that the attractive adsorption capacity reached 1134.08 mg/g with 0.05 g of SLT at an initial concentration of Ni(II) of 700 mg/L, solution pH of 5.5, adsorption temperature of 50 °C, and adsorption time of 40 min, meanwhile, the Ni(II) adsorption capacity significantly decreased with the increase in ionic strength. The pseudo-second order kinetic model could describe the whole adsorption process well, and the isotherm adsorption equilibrium conformed to the Freundlich model. The adsorption mechanism of SLT was also discussed by means of FTIR and Energy-Dispersive X-Ray (EDX). Dramatically, the introduction of sulfhydryl achieves the increased activated functional groups content of SLT nanocomposite, leading to remarkably higher adsorption amount on Ni(II). The desorption capacity of SLT was dependent on parameters such as HNO₃ concentration, desorption temperature, and ultrasonic desorption time. The satisfactory desorption capacity and desorption efficiency of 458.21 mg/g and 40.40% were obtained at an HNO₃ concentration, desorption temperature, and ultrasonic desorption time of 0.4 mol/L, 40 °C, and 30 min, respectively. The regeneration studies showed that the adsorption capacity of SLT was consistent for four cycles without any appreciable loss and confirmed that the SLT was reusable. Owing to such outstanding features, the novel SLT nanocomposite proved the great potential in adsorption for Ni(II) removal from aqueous solution, and exhibited an extremely significant amount of Ni(II), compared to pristine lignocellulose/montmorillonite and the conventional spent adsorbents.

Synthesis and application of a ternary composite of clay, saw-dust and peanut husks in heavy metal adsorption

The adsorption of a multi-component system of ferrous, chromium, copper, nickel and lead on single, binary and ternary composites was studied. The aim of the study was to investigate whether a ternary composite of clay, peanut husks (PH) and saw-dust (SD) exhibited a higher adsorption capacity than that of a binary system of clay and SD as well as a single component adsorbent of PH alone. The materials were used in their raw state without any chemical modifications. This was done to retain the cost effective aspect of the naturally occurring adsorbents. The adsorption capacities of the ternary composite for the heavy metals Fe²⁺, Cr³⁺, Cu²⁺, Ni²⁺ and Pb²⁺ were 41.7 mg/g, 40.0 mg/g, 25.5 mg/g, 41.5 mg/g and 39.0 mg/g, respectively. It was found that the ternary composite exhibited excellent and enhanced adsorption capacity compared with both a binary and single adsorbent for the heavy metals Fe²⁺, Ni²⁺ and Cr³⁺. Characterization of the ternary composites was done using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and thermogravimetric analysis (TGA). Kinetic models and adsorption isotherms were also studied. The pseudo second order kinetic model and the Langmuir adsorption isotherm best described the adsorption mechanisms for the ternary composite towards each of the heavy metal ions.

Adsorption of Ni2+ from aqueous solution by magnetic Fe@graphite nano-composite

The removal of Ni2+ from aqueous solution by iron nanoparticles encapsulated by graphitic layers (Fe@G) was investigated. Nanoparticles Fe@G were prepared by chemical vapor deposition CVD process using methane as a carbon source and nanocrystalline iron. The properties of Fe@G were characterized by X-ray Diffraction method (XRD), High-Resolution Transmission Electron Microscopy (HRTEM), Fourier Transform-Infrared Spectroscopy (FTIR), BET surface area and zeta potential measurements. The effects of initial Ni2+ concentration (1–20 mg L−1), pH (4–11) and temperature (20–60°C) on adsorption capacity were studied. The adsorption capacity at equilibrium increased from 2.96 to 8.78 mg g−1, with the increase in the initial concentration of Ni2+ from 1 to 20 mg L−1 at pH 7.0 and 20oC. The experimental results indicated that the maximum Ni2+ removal could be attained at a solution pH of 8.2 and the adsorption capacity obtained was 9.33 mg g−1. The experimental data fitted well with the Langmuir model with a monolayer adsorption capacity of 9.20 mg g−1. The adsorption kinetics was found to follow pseudo-second-order kinetic model. Thermodynamics parameters, ΔHO, ΔGO and ΔSO, were calculated, indicating that the adsorption of Ni2+ onto Fe@G was spontaneous and endothermic in nature.

Adsorptive removal of nickel(II) ions from aqueous environment: A review

Among various methods adsorption can be efficiently employed for the treatment of heavy metal ions contaminated wastewater. In this context the authors reviewed variety of adsorbents used by various researchers for the removal of nickel(II) ions from aqueous environment. One of the objectives of this review article is to assemble the scattered available enlightenment on a wide range of potentially effective adsorbents for nickel(II) ions removal. This work critically assessed existing knowledge and research on the uptake of nickel by various adsorbents such as activated carbon, non-conventional low-cost materials, nanomaterials, composites and nanocomposites. The system's performance is evaluated with respect to the overall metal removal and the adsorption capacity. In addition, the equilibrium adsorption isotherms, kinetics and thermodynamics data as well as various optimal experimental conditions (solution pH, equilibrium contact time and dosage of adsorbent) of different adsorbents towards Ni(II) ions were also analyzed. It is evident from a literature survey of more than 190 published articles that agricultural solid waste materials, natural materials and biosorbents have demonstrated outstanding adsorption capabilities for Ni(II) ions.

Enhanced removal of nickel(II) ions from aqueous solutions by SDS-functionalized graphene oxide

In this paper, a one-pot and easy-to-handle method at room temperature without additional chemicals for the modification of graphene oxide (GO) with surfactant is found. Removal of nickel (II) ions from aqueous solutions by GO and surfactant (sodium dodecyl sulphate) modified graphene oxide (SDS-GO) was studied spectrophotometrically at room temperature as a function of time, initial concentration and pH. Adsorption capacity of the adsorbent was increased dramatically (from 20.19 to 55.16 mg/g found by Langmuir model) due to the functionalization of the surface by SDS. The driving force of the adsorption of Ni(II) ions is electrostatic attraction and Ni(II) ions adsorbed on the GO surface chemically besides ion exchange.