Enhanced Adsorption of Trivalent Arsenic from Water by Functionalized Diatom Silica Shells

Metal-Impregnated Petroleum Coke-Derived Activated Carbon for the Adsorption of Arsenic in Acidic Waters

The efficacy of metal-impregnated petroleum coke (PC) activated carbon for the adsorption of arsenite and arsenate in acidic waters is investigated in this study. Unmodified PC activated carbon, FeCl3-loaded activated carbon, KMnO4-loaded activated carbon, and a mixed FeCl3-KMnO4-loaded activated carbon were used for evaluation. The surface characteristics of the activated carbons before and after arsenic adsorption were analyzed by X-ray photoelectron spectroscopy (XPS). Arsenate adsorption was significantly improved by the addition of an iron-manganese-loaded activated carbon, increasing adsorption from 8.12 to 50.93%. Oxidation-reduction reactions are proposed based on the observed arsenic 2p3/2, iron 2p3/2, and manganese 2p3/2 XPS peaks. While iron in the iron-loaded activated carbon is not acting as the reducing agent, it is acting as a conductor for the flow of electrons from the activated carbon to the arsenic for reduction to take place prior to the physisorption of the arsenic. In the manganese-loaded activated carbon, manganese acts as the reducing agent for arsenic prior to arsenic adsorption to the surface through physisorption. XPS of the post-arsenic(V) exposure samples showed that the Fe2O3 species were reduced from 32.18 to 1.66% in the FeMn-loaded sample, while the FeOOH species were increased from 53.16 to 81.71%. Similarly, MnO in the FeMn-loaded activated carbon dropped from 26.82 to 15.40%, while MnOOH and MnO2 increased from 39.98 and 33.20 to 43.96 and 40.64%, respectively. This is consistent with the proposed mechanism. The adsorption of arsenite was also evaluated to show that the modification of the activated carbon adsorbed not only the arsenic(V) species but also the more toxic arsenic(III) species without the need for oxidation of the arsenic prior to adsorption.

Photonic Nano-/Microstructured Diatom Based Biosilica in Metal Modification and Removal-A Review

The siliceous exoskeletal shells of diatoms, commonly known as frustules, have drawn attention because of their photoluminescence property and high volume to surface area. Photonic biosilica can also enhance the plasmonic sensitivity of nanoparticles. Because of this, researchers have studied the effectiveness of various metal particles after combining with biosilica. Additionally, naturally occurring diatom-based biosilica has excellent adsorption and absorption capabilities, which have already been exploited for wastewater treatment. Moreover, the nanoporous, ultra-hydrophilic frustules can easily accumulate more molecules on their surfaces. As a consequence, it becomes easier to conjugate noble metals with silica, making them more stable and effective. The main focus of this review is to agglomerate the utility of biocompatible diatom frustules, which is a no-cost natural resource of biosilica, in metal modification and removal.

Characteristics of the Properties of Absodan Plus Sorbent and Its Ability to Remove Phosphates and Chromates from Aqueous Solutions

The aim of the research was to characterize the parameters of the diatomite sorbent Absodan Plus as well as to assess its suitability for the adsorption of chromates and phosphates from acidic aqueous solutions simulating the conditions occurring in some types of industrial wastewater. The scope of the research includes XRD, SEM, BET, and PZC analyses, and 3D observation of commercial diatomite granules and batch tests to determine the constants of kinetics and the equilibrium of chromates and phosphates adsorption. Absodan Plus is a diatomite commercial material containing an amorphous phase (33%) and is also the crystalline phase of quartz, hematite, and grossite. The material is macro- and mesoporous and its specific surface area is about 30 m²/g. Its PZC is around pH = 5.5–6.0 and in an acidic environment is able to adsorb the anions. The saturation of the adsorbent surface with molecules of the adsorbed substance occurs after 2 h for chromates and 2.5 h for phosphates. The maximum adsorption capacity of Absodan Plus in terms of phosphorus and chromium amounts to 9.46 mg P/g and 39.1 mg Cr/g, respectively. As shown by XRD analysis, Absodan Plus contains an admixture of hematite, which can support the removal of chromium and phosphorus.

Synthesis of Oxidant Functionalised Cationic Polymer Hydrogel for Enhanced Removal of Arsenic (III)

A cationic polymer gel (N-[3-(dimethylamino)propyl]acrylamide, methyl chloride quaternary)(DMAPAA-Q gel)-supported oxidising agent (KMnO₄ or K₂Cr₂O₇) was proposed to remove As from water. The gel could adsorb arsenite, As(III), and arsenate, As(V), through the ion exchange method, where the oxidising agent oxidised As(III) to As(V). theoretically speaking, the amount of oxidant in the gels can reach 73.7 Mol%. The maximal adsorption capacity of the D-Mn gel (DMAPAA-Q gel carrying MnO₄⁻) and D-Cr gel (DMAPAA-Q gel carrying Cr₂O₇²⁻) for As(III) could reach 200 mg g⁻¹ and 263 mg g⁻¹, respectively; moreover, the As(III) removal rate of the gels could still be maintained above 85% in a neutral or weak acid aquatic solution. Studies on the kinetic and adsorption isotherms indicated that the As adsorption by the D-Mn and D-Cr gels was dominated by chemisorption. The thermodynamic parameters of adsorption confirmed that the adsorption was an endothermic process. The removal of As is influenced by the co-existing high-valence anions. Based on these results, the gels were found to be efficient for the As(III) adsorption and could be employed for the As(III) removal from the industrial wastewater.

Diatoms with Invaluable Applications in Nanotechnology, Biotechnology, and Biomedicine: Recent Advances

Diatoms are unicellular microalga found in soil and almost every aquatic environment (marine and fresh water). Biogenic silica and diatoms are attractive for biotechnological and industrial applications, especially in the field of biomedicine, industrial/synthetic manufacturing processes, and biomedical/pharmaceutical sciences. Deposition of silica by diatoms allows them to create micro- or nanoscale structures which may be utilized in nanomedicine and especially in drug/gene delivery. Diatoms with their unique architectures, good thermal stability, suitable surface area, simple chemical functionalization/modification procedures, ease of genetic manipulations, optical/photonic characteristics, mechanical resistance, and eco-friendliness, can be utilized as smart delivery platforms. The micro- to nanoscale properties of the diatom frustules have garnered a great deal of attention for their application in diverse areas of nanotechnology and biotechnology, such as bioimaging/biosensing, biosensors, drug/gene delivery, photodynamic therapy, microfluidics, biophotonics, solar cells, and molecular filtrations. Additionally, the genetically engineered diatom microalgae-derived nanoporous biosilica have enabled the targeted anticancer drug delivery to neuroblastoma and B-lymphoma cells as well as the mouse xenograft model of neuroblastoma. In this perspective, current trends and recent advances related to the applications of diatoms for the synthesis of nanoparticles, gene/drug delivery, biosensing determinations, biofuel production, and remediation of heavy metals are deliberated, including the underlying significant challenges and future perspectives.

Simultaneous Removal of Trivalent Arsenic and Nitrate Using Microbial Fuel Cells

A rectangular double chamber with trivalent arsenic as the electron donor of the biological anode was constructed by microbial fuel cells (MFC), and the feasibility of the MFC simultaneous degradation of trivalent arsenic and nitrate was studied. Experimental results show that the co-matrix-coupled MFC reactor oxidizes trivalent arsenic in an anode chamber and degrades nitrate in the cathode chamber. The removal rate of trivalent arsenic is about 63.35%, and the degradation rate of nitrate is about 55.95% during the complete and stable operation period. MFC can continuously output electric energy, and the maximum output voltage is 388 mV. We compared and analyzed the main functional microflora of biofilm microorganisms in an anode chamber. In the long-term arsenic-polluted environment, the activity of Acinetobacter, Pseudomonas bacteria with arsenic resistance, was improved. It is inferred that a fraction of trivalent arsenic was oxidized to pentavalent arsenic by electrode-attached microorganisms. While remaining trivalent, arsenic was taken up by the suspended bacterial biomass and converted into stable arsenide. The results of this study have theoretical reference value for the expansion of the MFC application scope.

Diatom mediated heavy metal remediation: A review

Exposure to heavy metals is a major threat to aquatic bodies and is a global concern to our four main spheres of the earth viz. atmosphere, biosphere, hydrosphere, and lithosphere. The biosorption of pollutants using naturally inspired sources like microalgae has considerable advantages. Diatoms are the most dominant and diverse group of phytoplankton which accounts for 45% oceanic primary productivity. They perform a pioneer part in the biogeochemistry of metals in both fresh and marine water ecosystems. The diatoms play a significant role in degradation, speciation, and detoxification of chemical wastes and hazardous metals from polluted sites. Herein, an overview is presented about the ability of diatom algae to phycoremediate heavy metals by passive adsorption and active assimilation from their aqueous environments with an emphasis on extracellular and intracellular mechanisms involved in contaminant uptake through the frustules for preventing heavy metal toxicity.

Label-free gold nanorod-based plasmonic sensing of arsenic(iii) in contaminated water

An efficient label-free strategy for arsenic(iii) sensing in water through the suppression of iron(iii)-catalyzed oxidative shortening of gold nanorods.

Production and Characterization of a Bioflocculant Produced by Bacillus salmalaya 139SI-7 and Its Applications in Wastewater Treatment

The production, optimization, and characterization of the bioflocculant QZ-7 synthesized by a novel Bacillus salmalaya strain 139SI isolated from a private farm soil in Selangor, Malaysia, are reported. The flocculating activity of bioflocculant QZ-7 present in the selected strain was found to be 83.3%. The optimal culture for flocculant production was achieved after cultivation at 35.5 °C for 72 h at pH 7 ± 0.2, with an inoculum size of 5% (v/v) and sucrose and yeast extract as carbon and nitrogen sources. The maximum flocculating activity was found to be 92.6%. Chemical analysis revealed that the pure bioflocculant consisted of 79.08% carbohydrates and 15.4% proteins. The average molecular weight of the bioflocculant was calculated to be 5.13 × 10⁵ Da. Infrared spectrometric analysis showed the presence of carboxyl (COO-), hydroxyl (-OH), and amino (-NH₂) groups, polysaccharides and proteins. The bioflocculant QZ-7 exhibited a wide pH stability range from 4 to 7, with a flocculation activity of 85% at pH 7 ± 0.2. In addition, QZ-7 was thermally stable and retained more than 80% of its flocculating activity after being heated at 80 °C for 30 min. SEM analysis revealed that QZ-7 exhibited a clear crystalline brick-shaped structure. After treating wastewater, the bioflocculant QZ-7 showed significant flocculation performance with a COD removal efficiency of 93%, whereas a BOD removal efficiency of 92.4% was observed in the B. salmalaya strain 139SI. These values indicate the promising applications of the bioflocculant QZ-7 in wastewater treatment.

Adsorption/reduction of Hg(II) and Pb(II) from aqueous solutions by using bone ash/nZVI composite: effects of aging time, Fe loading quantity and co-existing ions

In this research, a versatile and highly efficient method for the stabilization of nanoscale zerovalent iron particles (nZVI) on the surface of ostrich bone ash (OBA) was presented as a novel inorganic adsorbent (OBA/nZVI) for the removal of Hg(II) and Pb(II) ions from aqueous solutions, even after 1 year of storage under room conditions. The removal behavior of the OBA/nZVI was assessed as a function of the initial pH, contact time, initial pollutants concentration, temperature, amount of adsorbent, effect of competitive metal ions, and ionic strength. The synthesized adsorbent was characterized by several techniques including N₂ adsorption at - 196 °C, FT-IR spectroscopy, scanning electron microscopy, X-ray diffraction, and zeta potential. The results confirmed that the OBA is a good candidate as support of nZVI. The maxima adsorption capacity for Hg(II) and Pb(II) ions found from experimental results were 170 and 160 mg g^-1, when the loading quantities of Fe were 20%. The equilibrium sorption data obeyed a Langmuir-Freundlich isotherm type model. The kinetic data of the adsorption followed the mechanism of the pseudo-second-order model. The thermodynamic experiments indicated that the removal of metal ions were feasible, endothermic, and spontaneous. It can be found that fresh and aged OBA/nZVI maintained its usability even after five cycles in the order: fresh (OBA/nZVI)-Hg(II) > fresh (OBA/nZVI)-Pb(II) > aged (OBA/nZVI)-Hg(II) > aged (OBA/nZVI)-Pb(II), which indicate that OBA/nZVI can be regenerated as adsorbent. The existence of Fe in the OBA/nZVI was proved by SEM-EDX results and X-ray diffraction analysis also confirmed adsorption/reduction of some of the Hg(II) to Hg⁰ and Pb(II) to Pb⁰.

3-Mercaptopropyltrimethoxysilane Modified Diatomite: Preparation and Application for Voltammetric Determination of Lead (II) and Cadmium (II)

In this study, functionalized diatomite was prepared by grafting of 3-mercaptopropyltrimethoxysilane (MPTMS) to diatomite (MPTMS-diatomite). The diatomite with thermal treatment from 100 to 700°C was functionalized by MPTMS under dry and humid conditions. The obtained MPTMS-diatomite was characterized by X-ray diffraction (XRD), thermal gravity-differential scanning calorimeter (TG-DSC), and Fourier transformation infrared (FT-IR). The results showed that an increase in treatment temperature seems to reduce the loading of MPTMS onto diatomite. The humidity of diatomite was favorable for the grafting of functional groups on the surface. The possible mechanisms of MPTMS loading to diatomite (MPTMS-diatomite) were also proposed. The performance of a carbon paste electrode (CPE) modified with MPTMS-diatomite in the simultaneous determination of Cd(II) and Pb(II) ions was addressed.

Production of a bioflocculant from methanol wastewater and its application in arsenite removal

A novel bioflocculant (MBF83) prepared using methanol wastewater as nutrient resource was systematically investigated in the study. The optimal conditions for bioflocculant production were determined to be an inoculum size of 8.6%, initial pH of 7.5, and a methanol concentration of 100.8mgL(-1). An MBF83 of 4.61gL(-1) was achieved as the maximum yield. MBF83 primarily comprised polysaccharide (74.1%) and protein (24.2%). The biopolymer, which was found to be safe in zebrafish in toxicity studies, was characterized using Fourier-transform infrared spectroscopy and elemental analysis. Additionally, conditions for the removal of arsenite by MBF83 were found to be MBF83 at 500mgL(-1), an initial pH of 7.0, and a contact time of 90min. Under the optimal conditions, the removal efficiency of arsenite was 86.1%. Overall, these findings indicate bioflocculation offers an effective alternative method of decreasing arsenite during wastewater treatment.