Are cranial biomechanical simulation data linked to known diets in extant taxa? A method for applying diet-biomechanics linkage models to infer feeding capability of extinct species

African wild dog (Lycaon pictus) masticatory apparatus and oral cavity morphology

African wild dogs (Lycaon pictus) are unique among canids in their specialized hunting strategies and social organization. Unlike other, more omnivorous canids, L. pictus is a hypercarnivore that consumes almost exclusively meat, particularly prey larger than its body size, which it hunts through cooperative, exhaustive predation tactics. Its bite force is also among the highest reported for carnivorans. Here, we dissected an adult male L. pictus specimen and conducted diffusion iodine contrast-enhanced computed tomography (diceCT) scans to evaluate and describe its masticatory and oral cavity musculature. Muscles of mastication in L. pictus are separated by deep layers of thick intermuscular fascia and deep insertions. The superficial surface of m. masseter is entirely covered by an extremely thick masseteric fascia. Deep to m. masseter pars reflexa and superficialis are additional bellies, m. masseter pars profunda and zygomaticomandibularis. Musculus temporalis in L. pictus, divides into suprazygomatic, superficial, and deep bellies separated by a deep layer of thick intermuscular fascia, and it inserts along the entire rostral margin of the mandibular ramus. Musculus digastricus appears to comprise a single, large fusiform belly which appears to receive its innervation exclusively from CN V3 (nervus mandibularis, division of nervus trigeminus). Musculus pterygoideus medialis and lateralis are each composed of a single, deep belly. However, despite its great bite force, the jaw adductor muscle mass in L. pictus is not increased for its body size over other canid taxa. This finding suggests there are other architectural adaptations to hypercarnivory beyond increased muscle volume (e.g., pennation angle, greater strength, optimization of lever arms for mechanical advantage).

Facing the facts: adaptive trade-offs along body size ranges determine mammalian craniofacial scaling

The mammalian cranium (skull without lower jaw) is representative of mammalian diversity and is thus of particular interest to mammalian biologists across disciplines. One widely retrieved pattern accompanying mammalian cranial diversification is referred to as 'craniofacial evolutionary allometry' (CREA). This posits that adults of larger species, in a group of closely related mammals, tend to have relatively longer faces and smaller braincases. However, no process has been officially suggested to explain this pattern, there are many apparent exceptions, and its predictions potentially conflict with well-established biomechanical principles. Understanding the mechanisms behind CREA and causes for deviations from the pattern therefore has tremendous potential to explain allometry and diversification of the mammalian cranium. Here, we propose an amended framework to characterise the CREA pattern more clearly, in that 'longer faces' can arise through several kinds of evolutionary change, including elongation of the rostrum, retraction of the jaw muscles, or a more narrow or shallow skull, which all result in a generalised gracilisation of the facial skeleton with increased size. We define a standardised workflow to test for the presence of the pattern, using allometric shape predictions derived from geometric morphometrics analysis, and apply this to 22 mammalian families including marsupials, rabbits, rodents, bats, carnivores, antelopes, and whales. Our results show that increasing facial gracility with size is common, but not necessarily as ubiquitous as previously suggested. To address the mechanistic basis for this variation, we then review cranial adaptations for harder biting. These dictate that a more gracile cranium in larger species must represent a structural sacrifice in the ability to produce or withstand harder bites, relative to size. This leads us to propose that facial gracilisation in larger species is often a product of bite force allometry and phylogenetic niche conservatism, where more closely related species tend to exhibit more similar feeding ecology and biting behaviours and, therefore, absolute (size-independent) bite force requirements. Since larger species can produce the same absolute bite forces as smaller species with less effort, we propose that relaxed bite force demands can permit facial gracility in response to bone optimisation and alternative selection pressures. Thus, mammalian facial scaling represents an adaptive by-product of the shifting importance of selective pressures occurring with increased size. A reverse pattern of facial 'shortening' can accordingly also be found, and is retrieved in several cases here, where larger species incorporate novel feeding behaviours involving greater bite forces. We discuss multiple exceptions to a bite force-mediated influence on facial proportions across mammals which lead us to argue that ecomorphological specialisation of the cranium is likely to be the primary driver of facial scaling patterns, with some developmental constraints as possible secondary factors. A potential for larger species to have a wider range of cranial functions when less constrained by bite force demands might also explain why selection for larger sizes seems to be prevalent in some mammalian clades. The interplay between adaptation and constraint across size ranges thus presents an interesting consideration for a mechanistically grounded investigation of mammalian cranial allometry.

Dental topographic proxies for ecological characteristics in carnivoran mammals

Form-function relationships in mammalian feeding systems are active topics of research in evolutionary biology. This is due principally to their fundamental importance for understanding dietary adaptations in extinct taxa and macro-evolutionary patterns of morphological transformations through changing environments. We hypothesize that three-dimensional dental topographic metrics represent stronger predictors for dietary and other ecological variables than do linear measurements. To test this hypothesis, we measured three dental topographic metrics: Relief Index (RFI), Dirichlet Normal Energy (DNE), and Orientation Patch Count Rotated (OPCR) in 57 extant carnivoran species. Premolar and molar dental topographic indices were regressed against activity, diet breadth, habitat breadth, terrestriality, and trophic level variables within a phylogenetic framework. The results of this study showed significant correlations between RFI and the ecological variables diet breadth and trophic level. Weaker correlations are documented between OPCR and activity and between DNE and trophic level. Our results suggest that cusp height is strongly reflective of dietary ecology in carnivorans as a whole, and represents a proxy mainly for different degrees of hypercarnivory observed within this group of predatory mammals.

Sagittal crest morphology decoupled from relative bite performance in Pleistocene tapirs (Perissodactyla: Tapiridae)

Bite force is often associated with specific morphological features, such as sagittal crests. The presence of a pronounced sagittal crest in some tapirs (Perissodactyla: Tapiridae) was recently shown to be negatively correlated with hard-object feeding, in contrast with similar cranial structures in carnivorans. The aim of this study was to investigate bite forces and sagittal crest heights across a wide range of modern and extinct tapirs and apply a comparative investigation to establish whether these features are correlated across a broad phylogenetic scope. We examined a sample of 71 specimens representing 15 tapir species (5 extant, 10 extinct) using the dry-skull method, linear measurements of cranial features, phylogenetic reconstruction, and comparative analyses. Tapirs were found to exhibit variation in bite force and sagittal crest height across their phylogeny and between different biogeographical realms, with high-crested morphologies occurring mostly in Neotropical species. The highest bite forces within tapirs appear to be driven by estimates for the masseter-pterygoid muscle complex, rather than predicted forces for the temporalis muscle. Our results demonstrate that relative sagittal crest height is poorly correlated with relative cranial bite force, suggesting high force application is not a driver for pronounced sagittal crests in this sample. The divergent biomechanical capabilities of different contemporaneous tapirids may have allowed multiple species to occupy overlapping territories and partition resources to avoid excess competition. Bite forces in tapirs peak in Pleistocene species, independent of body size, suggesting possible dietary shifts as a potential result of climatic changes during this epoch.

More Challenging Diets Sustain Feeding Performance: Applications Toward the Captive Rearing of Wildlife

The rescue and rehabilitation of young fauna is of substantial importance to conservation. However, it has been suggested that incongruous diets offered in captive environments may alter craniofacial morphology and hinder the success of reintroduced animals. Despite these claims, to what extent dietary variation throughout ontogeny impacts intrapopulation cranial biomechanics has not yet been tested. Here, finite element models were generated from the adult crania of 40 rats (n = 10 per group) that were reared on 4 different diet regimes and stress magnitudes compared during incisor bite simulations. The diets consisted of (1) exclusively hard pellets from weaning, (2) exclusively soft ground pellet meal from weaning, (3) a juvenile switch from pellets to meal, and (4) a juvenile switch from meal to pellets. We hypothesized that a diet of exclusively soft meal would result in the weakest adult skulls, represented by significantly greater stress magnitudes at the muzzle, palate, and zygomatic arch. Our hypothesis was supported at the muzzle and palate, indicating that a diet limited to soft food inhibits bone deposition throughout ontogeny. This finding presents a strong case for a more variable and challenging diet during development. However, rather than the "soft" diet group resulting in the weakest zygomatic arch as predicted, this region instead showed the highest stress among rats that switched as juveniles from hard pellets to soft meal. We attribute this to a potential reduction in number and activity of osteoblasts, as demonstrated in studies of sudden and prolonged disuse of bone. A shift to softer foods in captivity, during rehabilitation after injury in the wild for example, can therefore be detrimental to healthy development of the skull in some growing animals, potentially increasing the risk of injury and impacting the ability to access full ranges of wild foods upon release. We suggest captive diet plans consider not just nutritional requirements but also food mechanical properties when rearing wildlife to adulthood for reintroduction.

Plant-eating carnivores: Multispecies analysis on factors influencing the frequency of plant occurrence in obligate carnivores

Plant-eating behavior is one of the greatest mysteries in obligate carnivores. Despite unsuitable morphological and physiological traits for plant consumption, the presence of plants in scat or stomach contents has been reported in various carnivorous species. However, researchers' interpretations of this subject are varied, and knowledge about it is scarce, without any multispecies studies. This study assessed the extent of variation in the frequency of plant occurrence in scat and stomach contents, as well as its relationship with various factors in 24 felid species using data from 213 published articles. Since the frequency of plant occurrence has not always been reported, we created two-part models and estimated parameters in a Bayesian framework. We found a significant negative relationship between the frequency of plant occurrence and body mass. This may be because plant-eating behavior reduces the energy loss caused by parasites and increases the efficiency of energy intake, which has a greater importance in smaller animals that have relatively high metabolic rates. This exploratory study highlights the importance of considering plant consumption in dietary studies on carnivorous species to understand the adaptive significance of this behavior and the relationship between obligate carnivores and plants.

Rethinking the use of finite element simulations in comparative biomechanics research

In the past 15 years, the finite element (FE) method has become a ubiquitous tool in the repertoire of evolutionary biologists. The method is used to estimate and compare biomechanical performance implicated as selective factors in the evolution of morphological structures. A feature common to many comparative studies using 3D FE simulations is small taxonomic sample sizes. The time-consuming nature of FE model construction is considered a main limiting factor in taxonomic breadth of comparative FE analyses. Using a composite FE model dataset, I show that the combination of small taxonomic sample sizes and comparative FE data in analyses of evolutionary associations of biomechanical performance to feeding ecology generates artificially elevated correlations. Such biases introduce false positives into interpretations of clade-level trends. Considering this potential pitfall, recommendations are provided to consider the ways FE analyses are best used to address both taxon-specific and clade-level evolutionary questions.

Quantifying the link between craniodental morphology and diet in the Soricidae using geometric morphometrics

Dietary adaptations have often been associated with heightened taxonomic diversity. Yet, one of the most species-rich mammalian families, the Soricidae, is often considered to be ecologically and morphologically relatively homogenous. Here, we use geometric morphometrics to capture skull and dentary morphology in a broad sample of shrew species and test the hypothesis that morphological variation among shrew species reflects adaptations to food hardness. Our analyses demonstrate that morphology is associated with dietary ecology. Species that consume hard food items are larger and have specific morphological adaptions including an anteroposteriorly expanded parietal, an anteroposteriorly short and dorsoventrally tall rostrum, a mediolaterally wide palate, buccolingually wide cheek teeth, a large coronoid process and a dorsoventrally short jaw joint. The masseter muscle does not appear to play an important role in the strong bite force of shrews and the dentary is a better indicator of ecology than the skull. Our phylogenetic flexible discriminant function analysis suggests that the evolutionary history of shrews has shaped their morphology, canalizing dietary adaptations and enabling functional equivalence whereby different morphologies achieve similar dietary performances. Our work makes possible future studies of niche partitioning among sympatric species as well as the investigation of the diet of extinct soricids.

Masticatory system integration in a commensal canid: interrelationships between bones, muscles and bite force in the red fox

The jaw system in canids is essential for defence and prey acquisition. However, how it varies in wild species in comparison with domestic species remains poorly understood, yet is of interest in terms of understanding the impact of artificial selection. Here, we explored the variability and interrelationships between the upper and lower jaws, muscle architecture and bite force in the red fox (Vulpes vulpes). We performed dissections and used 3D geometric morphometric approaches to quantify jaw shape in 68 foxes. We used a static lever model and bite force estimates were compared with in vivo measurements of 10 silver foxes. Our results show strong relationships exist between cranial and mandible shape, and between cranial or mandible shape on the one hand and muscles or estimated bite force on the other hand, confirming the strong integration of the bony and muscular components of the jaw system. These strong relationships are strongly driven by size. The functional links between shape and estimated bite force are stronger for the mandible, which probably reflects its greater specialisation towards biting. We then compared our results with data previously obtained for dogs (Canis lupus familiaris) to investigate the effect of domestication. Foxes and dogs differ in skull shape and muscle physiological cross-sectional area (PCSA). They show a similar amount of morphological variation in muscle PCSA, but foxes show lower variation in cranial and mandible shape. Interestingly, the patterns of covariation are not stronger in foxes than in dogs, suggesting that domestication did not lead to a disruption of the functional links of the jaw system.

The pre-Pleistocene fossil thylacinids (Dasyuromorphia: Thylacinidae) and the evolutionary context of the modern thylacine

The thylacine is popularly used as a classic example of convergent evolution between placental and marsupial mammals. Despite having a fossil history spanning over 20 million years and known since the 1960s, the thylacine is often presented in both scientific literature and popular culture as an evolutionary singleton unique in its morphological and ecological adaptations within the Australian ecosystem. Here, we synthesise and critically evaluate the current state of published knowledge regarding the known fossil record of Thylacinidae prior to the appearance of the modern species. We also present phylogenetic analyses and body mass estimates of the thylacinids to reveal trends in the evolution of hypercarnivory and ecological shifts within the family. We find support that Mutpuracinus archibaldi occupies an uncertain position outside of Thylacinidae, and consider Nimbacinus richi to likely be synonymous with N. dicksoni. The Thylacinidae were small-bodied (< ~8 kg) unspecialised faunivores until after the ~15-14 Ma middle Miocene climatic transition (MMCT). After the MMCT they dramatically increase in size and develop adaptations to a hypercarnivorous diet, potentially in response to the aridification of the Australian environment and the concomitant radiation of dasyurids. This fossil history of the thylacinids provides a foundation for understanding the ecology of the modern thylacine. It provides a framework for future studies of the evolution of hypercarnivory, cursoriality, morphological and ecological disparity, and convergence within mammalian carnivores.

Why ruminating ungulates chew sloppily: Biomechanics discern a phylogenetic pattern

There is considerable debate regarding whether mandibular morphology in ungulates primarily reflects phylogenetic affinities or adaptation to specific diet. In an effort to help resolve this debate, we use three-dimensional finite element analysis (FEA) to assess the biomechanical performance of mandibles in eleven ungulate taxa with well-established but distinct dietary preferences. We found notable differences in the magnitude and the distribution of von Mises stress between Artiodactyla and Perissodactyla, with the latter displaying lower overall stress values. Additionally, within the order Artiodactyla the suborders Ruminantia and Tylopoda showed further distinctive stress patterns. Our data suggest that a strong phylogenetic signal can be detected in biomechanical performance of the ungulate mandible. In general, Perissodactyla have stiffer mandibles than Artiodactyla. This difference is more evident between Perissodactyla and ruminant species. Perissodactyla likely rely more heavily on thoroughly chewing their food upon initial ingestion, which demands higher bite forces and greater stress resistance, while ruminants shift comminution to a later state (rumination) where less mechanical effort is required by the jaw to obtain sufficient disintegration. We therefore suggest that ruminants can afford to chew sloppily regardless of ingesta, while hindgut fermenters cannot. Additionally, our data support a secondary degree of adaptation towards specific diet. We find that mandibular morphologies reflect the masticatory demands of specific ingesta within the orders Artiodactyla and Perissodactyla. Of particular note, stress patterns in the white rhinoceros (C. simum) look more like those of a general grazer than like other rhinoceros’ taxa. Similarly, the camelids (Tylopoda) appear to occupy an intermediate position in the stress patterns, which reflects the more ancestral ruminating system of the Tylopoda.

Tissue Mechanical Forces and Evolutionary Developmental Changes Act Through Space and Time to Shape Tooth Morphology and Function

Efforts from diverse disciplines, including evolutionary studies and biomechanical experiments, have yielded new insights into the genetic, signaling, and mechanical control of tooth formation and functions. Evidence from fossils and non-model organisms has revealed that a common set of genes underlie tooth-forming potential of epithelia, and changes in signaling environments subsequently result in specialized dentitions, maintenance of dental stem cells, and other phenotypic adaptations. In addition to chemical signaling, tissue forces generated through epithelial contraction, differential growth, and skeletal constraints act in parallel to shape the tooth throughout development. Here recent advances in understanding dental development from these studies are reviewed and important gaps that can be filled through continued application of evolutionary and biomechanical approaches are discussed.

Creating diversity in mammalian facial morphology: a review of potential developmental mechanisms

Mammals (class Mammalia) have evolved diverse craniofacial morphology to adapt to a wide range of ecological niches. However, the genetic and developmental mechanisms underlying the diversification of mammalian craniofacial morphology remain largely unknown. In this paper, we focus on the facial length and orofacial clefts of mammals and deduce potential mechanisms that produced diversity in mammalian facial morphology. Small-scale changes in facial morphology from the common ancestor, such as slight changes in facial length and the evolution of the midline cleft in some lineages of bats, could be attributed to heterochrony in facial bone ossification. In contrast, large-scale changes of facial morphology from the common ancestor, such as a truncated, widened face as well as the evolution of the bilateral cleft possessed by some bat species, could be brought about by changes in growth and patterning of the facial primordium (the facial processes) at the early stages of embryogenesis.

Recent inner ear specialization for high-speed hunting in cheetahs

The cheetah, Acinonyx jubatus, is the fastest living land mammal. Because of its specialized hunting strategy, this species evolved a series of specialized morphological and functional body features to increase its exceptional predatory performance during high-speed hunting. Using high-resolution X-ray computed micro-tomography (μCT), we provide the first analyses of the size and shape of the vestibular system of the inner ear in cats, an organ essential for maintaining body balance and adapting head posture and gaze direction during movement in most vertebrates. We demonstrate that the vestibular system of modern cheetahs is extremely different in shape and proportions relative to other cats analysed (12 modern and two fossil felid species), including a closely-related fossil cheetah species. These distinctive attributes (i.e., one of the greatest volumes of the vestibular system, dorsal extension of the anterior and posterior semicircular canals) correlate with a greater afferent sensitivity of the inner ear to head motions, facilitating postural and visual stability during high-speed prey pursuit and capture. These features are not present in the fossil cheetah A. pardinensis, that went extinct about 126,000 years ago, demonstrating that the unique and highly specialized inner ear of the sole living species of cheetah likely evolved extremely recently, possibly later than the middle Pleistocene.

Structure-function covariation with nonfeeding ecological variables influences evolution of feeding specialization in Carnivora

Skull shape convergence is pervasive among vertebrates. Although this is frequently inferred to indicate similar functional underpinnings, neither the specific structure-function linkages nor the selective environments in which the supposed functional adaptations arose are commonly identified and tested. We demonstrate that nonfeeding factors relating to sexual maturity and precipitation-related arboreality also can generate structure-function relationships in the skulls of carnivorans (dogs, cats, seals, and relatives) through covariation with masticatory performance. We estimated measures of masticatory performance related to ecological variables that covary with cranial shape in the mammalian order Carnivora, integrating geometric morphometrics and finite element analyses. Even after accounting for phylogenetic autocorrelation, cranial shapes are significantly correlated to both feeding and nonfeeding ecological variables, and covariation with both variable types generated significant masticatory performance gradients. This suggests that mechanisms of obligate shape covariation with nonfeeding variables can produce performance changes resembling those arising from feeding adaptations in Carnivora.

The jaw is a second-class lever in Pedetes capensis (Rodentia: Pedetidae)

The mammalian jaw is often modelled as a third-class lever for the purposes of biomechanical analyses, owing to the position of the resultant muscle force between the jaw joint and the teeth. However, it has been proposed that in some rodents the jaws operate as a second-class lever during distal molar bites, owing to the rostral position of the masticatory musculature. In particular, the infraorbital portion of the zygomatico-mandibularis (IOZM) has been suggested to be of major importance in converting the masticatory system from a third-class to a second-class lever. The presence of the IOZM is diagnostic of the hystricomorph rodents, and is particularly well-developed in Pedetes capensis, the South African springhare. In this study, finite element analysis (FEA) was used to assess the lever mechanics of the springhare masticatory system, and to determine the function of the IOZM. An FE model of the skull of P. capensis was constructed and loaded with all masticatory muscles, and then solved for biting at each tooth in turn. Further load cases were created in which each masticatory muscle was removed in turn. The analyses showed that the mechanical advantage of the springhare jaws was above one at all molar bites and very close to one during the premolar bite. Removing the IOZM or masseter caused a drop in mechanical advantage at all bites, but affected strain patterns and cranial deformation very little. Removing the ZM had only a small effect on mechanical advantage, but produced a substantial reduction in strain and deformation across the skull. It was concluded that the masticatory system of P. capensis acts as a second class lever during bites along almost the entire cheek tooth row. The IOZM is clearly a major contributor to this effect, but the masseter also has a part to play. The benefit of the IOZM is that it adds force without substantially contributing to strain or deformation of the skull. This may help explain why the hystricomorphous morphology has evolved multiple times independently within Rodentia.

A biomechanical approach to understand the ecomorphological relationship between primate mandibles and diet

The relationship between primate mandibular form and diet has been previously analysed by applying a wide array of techniques and approaches. Nonetheless, most of these studies compared few species and/or infrequently aimed to elucidate function based on an explicit biomechanical framework. In this study, we generated and analysed 31 Finite Element planar models of different primate jaws under different loading scenarios (incisive, canine, premolar and molar bites) to test the hypothesis that there are significant differences in mandibular biomechanical performance due to food categories and/or food hardness. The obtained stress values show that in primates, hard food eaters have stiffer mandibles when compared to those that rely on softer diets. In addition, we find that folivores species have the weakest jaws, whilst omnivores have the strongest mandibles within the order Primates. These results are highly relevant because they show that there is a strong association between mandibular biomechanical performance, mandibular form, food hardness and diet categories and that these associations can be studied using biomechanical techniques rather than focusing solely on morphology.

A unique feeding strategy of the extinct marine mammal Kolponomos: convergence on sabretooths and sea otters

Mammalian molluscivores feed mainly by shell-crushing or suction-feeding. The extinct marine arctoid, Kolponomos, has been interpreted as an otter-like shell-crusher based on similar dentitions. However, neither the masticatory biomechanics of the shell-crushing adaptation nor the way Kolponomos may have captured hard-shelled prey have been tested. Based on mandibular symphyseal morphology shared by Kolponomos and sabre-toothed carnivores, we hypothesize a sabretooth-like mechanism for Kolponomos prey-capture, whereby the mandible functioned as an anchor. Torque generated from jaw closure and head flexion was used to dislodge prey by prying, with prey then crushed using cheek teeth. We test this hypothesized feeding sequence using phylogenetically informed biomechanical simulations and shape analyses, and find a strongly supported, shared high mandibular stiffness in simulated prey-capture bites and mandibular shape in Kolponomos and the sabre-toothed cat Smilodon. These two distantly related taxa converged on using mandibles to anchor cranial torqueing forces when prying substrate-bound prey in the former and sabre-driving forces during prey-killing in the latter. Simulated prey-crushing bites indicate that Kolponomos and sea otters exhibit alternative structural stiffness-bite efficiency combinations in mandibular biomechanical adaptation for shell-crushing. This unique feeding system of Kolponomos exemplifies a mosaic of form-function convergence relative to other Carnivora.

An integrative method for testing form-function linkages and reconstructed evolutionary pathways of masticatory specialization

Morphology serves as a ubiquitous proxy in macroevolutionary studies to identify potential adaptive processes and patterns. Inferences of functional significance of phenotypes or their evolution are overwhelmingly based on data from living taxa. Yet, correspondence between form and function has been tested in only a few model species, and those linkages are highly complex. The lack of explicit methodologies to integrate form and function analyses within a deep-time and phylogenetic context weakens inferences of adaptive morphological evolution, by invoking but not testing form-function linkages. Here, we provide a novel approach to test mechanical properties at reconstructed ancestral nodes/taxa and the strength and direction of evolutionary pathways in feeding biomechanics, in a case study of carnivorous mammals. Using biomechanical profile comparisons that provide functional signals for the separation of feeding morphologies, we demonstrate, using experimental optimization criteria on estimation of strength and direction of functional changes on a phylogeny, that convergence in mechanical properties and degree of evolutionary optimization can be decoupled. This integrative approach is broadly applicable to other clades, by using quantitative data and model-based tests to evaluate interpretations of function from morphology and functional explanations for observed macroevolutionary pathways.

Cranial biomechanics, bite force and function of the endocranial sinuses in Diprotodon optatum, the largest known marsupial

The giant extinct marsupial Diprotodon optatum has unusual skull morphology for an animal of its size, consisting of very thin bone and large cranial sinuses that occupy most of the internal cranial space. The function of these sinuses is unknown as there are no living marsupial analogues. The finite element method was applied to identify areas of high and low stress, and estimate the bite force of Diprotodon to test hypotheses on the function of the extensive cranial sinuses. Detailed three-dimensional models of the cranium, mandible and jaw adductor muscles were produced. In addition, manipulations to the Diprotodon cranial model were performed to investigate changes in skull and sinus structure, including a model with no sinuses (sinuses 'filled' with bone) and a model with a midsagittal crest. Results indicate that the cranial sinuses in Diprotodon significantly lighten the skull while still providing structural support, a high bite force and low stress, indicating the cranium may have been able to withstand higher loads than those generated during feeding. Data from this study support the hypothesis that pneumatisation is driven by biomechanical loads and occurs in areas of low stress. The presence of sinuses is likely to be a byproduct of the separation of the outer surface of the skull from the braincase due to the demands of soft tissue including the brain and the large jaw adductor musculature, especially the temporalis. In very large species, such as Diprotodon, this separation is more pronounced, resulting in extensive cranial sinuses due to a relatively small brain compared with the size of the skull.

Bony labyrinth shape variation in extant Carnivora: a case study of Musteloidea

The bony labyrinth provides a proxy for the morphology of the inner ear, a primary cognitive organ involved in hearing, body perception in space, and balance in vertebrates. Bony labyrinth shape variations often are attributed to phylogenetic and ecological factors. Here we use three-dimensional (3D) geometric morphometrics to examine the phylogenetic and ecological patterns of variation in the bony labyrinth morphology of the most species-rich and ecologically diversified traditionally recognized superfamily of Carnivora, the Musteloidea (e.g. weasels, otters, badgers, red panda, skunks, raccoons, coatis). We scanned the basicrania of specimens belonging to 31 species using high-resolution X-ray computed micro-tomography (μCT) to virtually reconstruct 3D models of the bony labyrinths. Labyrinth morphology is captured by a set of six fixed landmarks on the vestibular and cochlear systems, and 120 sliding semilandmarks, slid at the center of the semicircular canals and the cochlea. We found that the morphology of this sensory structure is not significantly influenced by bony labyrinth size, in comparisons across all musteloids or in any of the individual traditionally recognized families (Mephitidae, Procyonidae, Mustelidae). PCA (principal components analysis) of shape data revealed that bony labyrinth morphology is clearly distinguishable between musteloid families, and permutation tests of the Kmult statistic confirmed that the bony labyrinth shows a phylogenetic signal in musteloids and in most mustelids. Both the vestibular and cochlear regions display morphological differences among the musteloids sampled, associated with the size and curvature of the semicircular canals, angles between canals, presence or absence of a secondary common crus, degree of lateral compression of the vestibule, orientation of the cochlea relative to the semicircular canals, proportions of the cochlea, and degree of curvature of its turns. We detected a significant ecological signal in the bony labyrinth shape of musteloids, differentiating semi-aquatic taxa from non-aquatic ones (the taxa assigned to terrestrial, arboreal, semi-arboreal, and semi-fossorial categories), and a significant signal for mustelids, differentiating the bony labyrinths of terrestrial, semi-arboreal, arboreal, semi-fossorial and semi-aquatic species from each other. Otters and minks are distinguished from non-aquatic musteloids by an oval rather than circular anterior canal, sinuous rather than straight lateral canal, and acute rather than straight angle between the posterior and lateral semicircular canals - each of these morphological characters has been related previously to animal sensitivity for detecting head motion in space.