Genotoxic Evaluation of Mexican Welders Occupationally Exposed to Welding-Fumes Using the Micronucleus Test on Exfoliated Oral Mucosa Cells: A Cross-Sectional, Case-Control Study

Use of micronucleus cytome assays with buccal cells for the detection of genotoxic effects: A systematic review and meta-analysis of occupational exposures to metals

Micronucleus (MN) assays with buccal cells are at present widely used to investigate occupational exposures to genotoxic carcinogens. This article describes their use for the monitoring of metal exposed workers. We found in total 73 relevant articles, in the majority (97 %) increased MN and/or other nuclear anomalies were reported. Most studies were realized in South East Asia and South America. A variety of different occupations was studied including welders, electroplaters, painters, workers in battery recycling and production, tannery workers, dental technicians, miners, workers in foundries and smelters, and also subjects working in waste recycling, glass, aluminum and steel production. In many investigations the effects increased with the duration of the working period. The quality of individual studies was evaluated with a quality score tool. The number of cells was in most studies sufficient and DNA-specific stains were used. However, many studies have shortcomings, e.g. they focused solely on MN formation and did not evaluate anomalies, which provide additional information about the stability of the genetic material and acute cytotoxic effects. Only 35 % of the investigations contain quantitative information about exposures to metals and other toxicants. In 6 of these studies, correlations were observed between the concentrations of specific metals (As, Pb, Cr, Cd) in body fluids and MN frequencies. Taken together, the available data indicate that the MN assay can be used to detect chromosomal damage in metal exposed groups; furthermore, it enables also comparisons between subgroups differing in regard to their exposure and allows an estimation of the efficiency of protective measures. The exposure of workers to metals is currently controlled with chemical analytical measurements only, MN assays with buccal cells could contribute to further improve the safety at workplaces as they reflect the biological consequences including synergistic and antagonistic interactions between toxicants.

Expression deregulation of genes related to DNA repair and lead toxicity in occupationally exposed industrial workers

OBJECTIVE

Globally millions of people working in various industries and are exposed to different toxins which may affect their genetic stability and DNA integrity. Present study was designed to estimate the expression variation of genes related to DNA repair (XRCC1, PARP1) and lead toxicity (ALAD) in exposed industrial workers.

METHODS

About 200 blood samples were collected from workers of brick kiln, welding, furniture and paint industry (50/industry) along with age and gender matched controls. mRNA expression of genes was measured using RT-PCR. Serum levels of total ROS, POD, TBAR activity was calculated. Blood lead levels were estimated by atomic absorption spectrometer.

RESULTS

Relative expression of XRCC1 and PARP1 gene was significantly (P < 0.001) upregulated, while ALAD gene expression was downregulated in exposed group compared to control. Expression of XRCC1 and PARP1 was increased (P < 0.001) in exposed workers with > 30 year age compared to control with > 30 year age. Same was observed when < 30 year age group of control and exposed was compared. Likewise, XRCC1 and PARP1 expression was increased (P < 0.001) in exposed workers with > 30 year age compared to workers with < 30 year age. Whereas, ALAD gene showed significant (P < 0.01) decrease in > 30 year age workers compared to control of same age and exposed with < 30 year of age. Relative expression of XRCC1 and PARP1 was increased (P < 0.001) in exposed smokers compared to exposed non-smokers and control smokers. Whereas, ALAD gene expression reduced (P < 0.001) significantly in both groups. Blood lead content was higher (P < 0.001) in exposed group compared to control. Strong correlation was observed between XRCC1, PARP1 and ALAD gene versus age, total exposure duration, exposure per day and lead deposition. ROS, TBARS and POD activity was higher (P < 0.01) in exposed group compared to control group.

CONCLUSION

Present study suggested deregulation of genes related to DNA repair and lead intoxication in exposed group compared to controls. Strong correlation was observed between selected genes and demographic parameters. Present results revealed altered activity of oxidative stress markers which would induce oxidative damage to DNA integrity and limit the function of repair enzymes.

DNA damage in foundry workers using non-invasive micronucleus cytome assay

Workers in the foundry industry are exposed to hazardous chemical agents such as metal fumes, gases, vapor of molten metal, and respirable dust and hazardous physical agents such as heat, noise, and electromagnetic fields. Co-exposures to hazardous physical and chemical agents in foundry workplaces may cause DNA damage in workers. This study aimed to evaluate DNA damage in foundry workers. Thirty-three exposed foundry workers as a exposure groups and 33 non-exposed individuals as a control groups participated in this study. Buccal micronucleus cytome (BMCyt assay) assay was used to assess DNA damage. Results showed that foundry workers were under exposure to hazardous chemical and physical agents such as metal fumes and noise. The percentage of micronucleus (MN) cells in exposure group (0.59 ± 0.93 %) were statistically higher than control group (0.23 ± 0.23 %) (P < 0.05) %). Also, the percentage of nuclear bud cells and binucleated cells in exposure group were statistically higher than control group (P < 0.05). The percentage of differentiated normal cells were significantly higher in the control group compared to the exposed group (P < 0.05). Foundry workers are at risk of DNA damage; therefore, prevention measures need to be implemented to reduce exposure to air pollutants in foundry workplaces.

Micronucleus assay of DNA damage among welders: effects of welding processes

Metal fumes, gases, noise, and radiation are hazardous occupational exposures that may be encountered by welders. We have evaluated DNA damage among welders; the buccal micronucleus cytome (BMCyt) assay was used. Thirty-four exposed welders (cases) and an equal number of non-welders (controls) participated in this study. Cell types including basal, early and late differentiated cells with micronucleus (MN), dense chromatin, karyorrhectic, pyknotic, karyolitic, and binucleated cells (NBUD) were measured. Damage levels among, arc, argon, and CO₂ welders were statistically significantly higher, compared to the control group. Results showed that mean of MN and NBUDs as indicators of DNA damages among arc, argon and CO₂ welding's were significantly higher compared to control group. Also, the mean of DNA damage levels were statistically higher among the arc welders than among the argon or CO₂ welders; and levels were higher among the argon welders than the CO₂ welders. Preventative measures need to be implemented to reduce exposure to harmful agents during welding.

Evaluation of the genetic damage to workers in a Greek shipyard

Shipyards are industrial areas where workers are likely exposed to environmental pollutants such as welding fumes, fine organic solvent and dye dust, that render the occupational environment a high risk one. Assessing the risk that workers are exposed to is a high critical factor in improving their working conditions. The present study aims to investigate the potential genetic damage to workers exposed to a harsh environment in a Greek shipyard. It is focused on assessing the percentage of induced micronuclei, as well as on changes in the various cell types of shipyard workers' oral mucosa epithelium by implementing the buccal micronucleus cytome assay. Exposed workers appeared with statistically significant induced micronuclei as compared to office employees. Statistically, significant cell lesions were detected and are related to workers' exposure to environmental conditions. The workers' smoking habit contributed as well to the observed buccal epithelial cell alterations. The observed data signify the high-risk workers are exposed; resulting in the shipyard's management the need to implement measures improving the working environment conditions and to reevaluate the workers' personal protective equipment requirements.

Cytokinesis-block micronucleus cytome (CBMN-CYT) assay biomarkers and telomere length analysis in relation to inorganic elements in individuals exposed to welding fumes

During the welding activities many compounds are released, several of these cause oxidative stress and inflammation and some are considered carcinogenic, in fact the International Agency for Research on Cancer established that welding fumes are carcinogenic to humans. The aim of the present study was to analyze the cytotoxic and genotoxic potential of exposure to welding fumes and to determine concentrations of metals in blood and urine of occupationally exposed workers. We included 98 welders and 100 non-exposed individuals. Our results show significant increase in the frequency of micronuclei (MN), nucleoplasmic bridges (NPB), nuclear buds (NBUD) and necrotic cells (NECR) in cytokinesis-block micronucleus cytome (CBMN-Cyt) assay, as well as in the telomere length (TL) of the exposed individuals with respect to the non-exposed group. In the analysis of the concentrations of inorganic elements using PIXE method, were found higher concentrations of Cr, Fe and Cu in the urine, and Cr, Fe, Mg, Al, S, and Mn in the blood in the exposed group compared to the non-exposed group. A significant correlation was observed between MN and age and between NPB and years of exposure. Additionally, we found a significant correlation for TL in relation to MN, NPB, age and years of exposure in the exposed group. Interestingly, a significant correlation between MN and the increase in the concentration of Mg, S, Fe and Cu in blood samples of the exposed group, and between MN and Cr, Fe, Ni and Cu in urine. Thus, our findings may be associated with oxidative and inflammatory damage processes generated by the components contained in welding fumes, suggesting a high occupational risk in welding workers.

Evaluation of Anti-Cytotoxic and Anti-Genotoxic Effects of Nigella sativa through a Micronucleus Test in BALB/c Mice

Nigella sativa (N. sativa) is a medicinal plant used for its therapeutic pharmacological effects such as anti-inflammatory, antioxidant, anticancer, antidiabetic, and immunomodulation. This study explored the anti-cytotoxic and anti-genotoxic effect of N. sativa through a micronucleus test (MNT) of BALB/c mice peripheral blood. Using 6-to-8-week-old healthy male BALB/c mice, four groups were formed: (1) Control (sterile water), single-dose 2 mg/kg/intraperitoneal (i.p); (2) N. sativa oil, 500 mg/kg/24 h/7 days/i.p; (3) Cisplatin (CP), single-dose 2 mg/kg/subcutaneous (s.c); (4) N. sativa + CP with their respective dosage. When evaluating polychromatic erythrocytes (PCE), a biomarker of cytotoxicity, the group treated with N. sativa + CP experienced an increase in the frequency of PCE, which demonstrated the recovery of bone marrow and modulation of cell proliferation. The analysis of micronucleated polychromatic erythrocytes (MNPCE), an acute genotoxicity biomarker, showed similar frequency of MNPCE within the groups except in CP, but, in the N. sativa + CP group, the frequency of MNPCE decreased and then regulated. Finally, the frequency of micronucleated erythrocytes (MNE), a biomarker of genotoxicity, the supplementation of N. sativa oil did not induce genotoxic damage in this model. Thus, we conclude that N. sativa has both cytoprotective, genoprotective effects and modulates cell proliferation in BALB/c mice.

Welding Fumes, a Risk Factor for Lung Diseases

(1) Background: Welding fumes (WFs) are composed of fine and ultrafine particles, which may reach the distal airways and represent a risk factor for respiratory diseases. (2) Methods: In vitro and in vivo studies to understand WFs pathogenesis were selected. Epidemiological studies, original articles, review, and meta-analysis to examine solely respiratory disease in welders were included. A systematic literature search, using PubMed, National Institute for Occupational Safety and Health Technical Information Center (NIOSHTIC), and Web of Science databases, was performed. (3) Results: Dose, time of exposure, and composition of WFs affect lung injury. Inflammation, lung defense suppression, oxidative stress, DNA damage, and genotoxic effects were observed after exposure both to mild and stainless steel WFs. (4) Conclusions: The detection of lung diseases associated with specific occupational exposure is crucial as complete avoidance or reduction of the exposure is difficult to achieve. Further studies in the area of particle research may aid the understanding of mechanisms involved in welding-related lung disease and to expand knowledge in welding-related cardiovascular diseases.

The repeated cytogenetic analysis of subjects occupationally exposed to nanoparticles: a pilot study

The application of nanomaterials has been rapidly increasing during recent years. Inhalation exposure to nanoparticles (NP) may result in negative toxic effects but there is a critical lack of human studies, especially those related to possible DNA alterations. We analyzed pre-shift and post-shift a group of nanocomposite researchers with a long-term working background (17.8 ± 10.0 years) and matched controls. The study group consisted of 73.2% males and 26.8% females. Aerosol exposure monitoring during a working shift (involving welding, smelting, machining) to assess the differences in exposure to particulate matter (PM) including nanosized fractions <25–100 nm, and their chemical analysis, was carried out. A micronucleus assay using Human Pan Centromeric probes, was applied to distinguish between the frequency of centromere positive (CEN+) and centromere negative (CEN−) micronuclei (MN) in the binucleated cells. This approach allowed recognition of the types of chromosomal damage: losses and breaks. The monitoring data revealed differences in the exposure to NP related to individual working processes, and in the chemical composition of nanofraction. The cytogenetic results of this pilot study demonstrated a lack of effect of long-term (years) exposure to NP (total frequency of MN, P = 0.743), although this exposure may be responsible for DNA damage pattern changes (12% increase of chromosomal breaks—clastogenic effect). Moreover, short-term (daily shift) exposure could be a reason for the increase of chromosomal breaks in a subgroup of researchers involved in welding and smelting processes (clastogenic effect, P = 0.037). The gender and/or gender ratio of the study participants was also an important factor for the interpretation of the results. As this type of human study is unique, further research is needed to understand the effects of long-term and short-term exposure to NP.

Assessment of DNA damage in welders using comet and micronucleus assays

Welding technology is widely used in pressurized containers, thermal power plants, refineries, chemical facilities and steel structures. Welders are exposed to a number of hazardous compounds such as ultraviolet (UV) radiation, electromagnetic fields, toxic metals and polycyclic aromatic hydrocarbons (PAHs). In the present study, 48 welders and an equal number of control subjects were evaluated for DNA damage in the whole blood and isolated lymphocytes using the comet assay. The genotoxic damage in buccal epithelial cells of subjects was determined by micronucleus (MN) assay. Metal(loids) such as Cr, Mn, Ni, Cu, As, Cd and Pb levels in blood samples were evaluated by using Inductively Coupled Plasma-Mass Spectrometer (ICP-MS). Results of this study showed that DNA damage in blood, isolated lymphocytes, and buccal epithelial cells were significantly higher in workers compared to the controls. Also, these workers had remarkably higher blood Cr, Cu, Cd, Ni and Pb levels. These results showed that occupational exposure to welding fumes may cause genotoxic damage that can lead to important health problems in the workers. More extensive epidemiological studies should be performed that enable the assessment of health risk in welding industry.

Evaluation of genotoxic and cytotoxic effects in buccal mucosa cells of welders in the cities of Cubatão and Santos, state of São Paulo, Brazil

Background

Approximately 5 million workers are estimated to be occupationally exposed to welding fumes worldwide. Nickel and chromium are genotoxic metals found in welding fumes, therefore welders are exposed to these metals at the workplace.

Objective

The objective of the present study was to investigate the frequency of cytotoxic and genetic damage in cells harvested from the oral mucosa of welders and also from a group of workers not exposed to metallic fumes.

Methods

A total of 44 individuals, divided into 2 groups - welders and non-welders - were compared using the micronucleus assay technique and cell death (pyknosis, karyorrhexis and karyolysis) on buccal mucosa cells of welding workers. The examined cells were stained with Feulgen/Fast Green. Results: Welders exhibited higher frequency (p<0.05) of cytotoxicity than the group of volunteers not exposed to metallic fumes.

Conclusion

The results of this preliminary study suggest that the frequency of cytotoxic damage in buccal mucosa cells might be higher among welders compared to non-welders.