Cephalometric Analysis of the Facial Skeletal Morphology of Female Patients Exhibiting Skeletal Class II Deformity with and without Temporomandibular Joint Osteoarthrosis

Prevalence of condylar morphological changes in individuals with class II malocclusion

This observational, cross-sectional study with retrospective collection was aimed to evaluate the prevalence of morphological changes in mandibular condyles in individuals with class II malocclusion, classified according to different vertical growth patterns (brachyfacial, mesofacial, and dolichofacial), through cone beam computed tomography (CBCT). Seventy CBCT images (140 mandibular condyles) were selected from individuals without orthodontic treatment, of both sexes, aged between 25 and 50 years. No statistically significant differences were found between facial patterns; however, there was a higher relative prevalence of bone changes in dolichofacial individuals with flattening (62%), sclerosis (44%), and subchondral bone cyst (20%). Erosion and osteophytes prevailed in mesofacial (39%), and brachyfacial individuals (32%), respectively. Thus, there was no statistically significant difference in the prevalence of degenerative changes between the vertical skeletal patterns. Flattening was the most prevalent change, whereas subchondral bone cyst was the least prevalent among the three groups studied. The observational design of this study makes it possible to analyze image banks to verify the correlation of morphological changes in the temporomandibular joint in different facial patterns in patients with class II malocclusion. A limitation of the study is that clinical characteristics were not evaluated.

Systematic review of computed tomography parameters used for the assessment of subchondral bone in osteoarthritis

OBJECTIVE

To systematically review the published parameters for the assessment of subchondral bone in human osteoarthritis (OA) using computed tomography (CT) and gain an overview of current practices and standards.

DESIGN

A literature search of Medline, Embase and Cochrane Library databases was performed with search strategies tailored to each database (search from 2010 to January 2023). The search results were screened independently by two reviewers against pre-determined inclusion and exclusion criteria. Studies were deemed eligible if conducted in vivo/ex vivo in human adults (>18 years) using any type of CT to assess subchondral bone in OA. Extracted data from eligible studies were compiled in a qualitative summary and formal narrative synthesis.

RESULTS

This analysis included 202 studies. Four groups of CT modalities were identified to have been used for subchondral bone assessment in OA across nine anatomical locations. Subchondral bone parameters measuring similar features of OA were combined in six categories: (i) microstructure, (ii) bone adaptation, (iii) gross morphology (iv) mineralisation, (v) joint space, and (vi) mechanical properties.

CONCLUSIONS

Clinically meaningful parameter categories were identified as well as categories with the potential to become relevant in the clinical field. Furthermore, we stress the importance of quantification of parameters to improve their sensitivity and reliability for the evaluation of OA disease progression and the need for standardised measurement methods to improve their clinical value.

Three-dimensional relationships between condylar volume and dentoskeletal characteristics in Class II hyperdivergent female adults

BACKGROUND

This study aimed to determine the differences among various volumes of condylar osseous patterns and the corresponding dentoskeletal characteristics based on the risk of temporomandibular disorder.

METHODS

Craniofacial spiral computed tomography data of 60 Class II hyperdivergent female adults were divided into normal, resorptive, flattened, and osteophyte groups based on condylar osseous forms. The condylar volumes of each group were compared, and their correlations with the dentoskeletal characteristics were assessed in three dimensions. Pairwise least significant difference tests were used to examine individual pairwise differences between groups, and one-way analysis of variance was used to measure differences among multiple groups. Pearson correlation and Spearman rank correlation analyses were used to determine the correlation between condylar volume and dentofacial characteristics. Statistical significance was established at p < 0.05.

RESULTS

The condylar volume in the normal group was significantly greater than that in the changed groups, with no significant differences between the subgroups. The decrease in condylar volume was associated with a retruded and clockwise-rotated mandible with shorter rami. Condylar volume was negatively correlated with overjet, the alveolar height of the lower anterior and posterior teeth, sagittal inclinations of the lower teeth, intermolar width of the mandibular first molars, and width between the corresponding alveolar crests.

CONCLUSION

Multiple three-dimensional dentoskeletal characteristics of Class II hyperdivergent female adults are correlated with condylar bony changes, regardless of the form. These results could be helpful in indicating potential pathological changes in the temporomandibular joint and in making proper treatment plans for these patients.

Comparison of two different therapeutic approaches for skeletal Class II patients with temporomandibular degenerative joint disease

OBJECTIVES

To compare two different therapeutic approaches for skeletal Class II patients with temporomandibular degenerative joint disease.

MATERIALS AND METHODS

A total of 47 patients were included in this study. Group anterior repositioning splint (ARS) was treated with temporomandibular joint (TMJ) disc surgery followed by an ARS and camouflage orthodontic treatment. Group stabilization splint (SS) was treated with an SS followed by orthodontic treatment combined with orthognathic surgery. Cephalometric analysis of lateral radiographs and measurements of condylar height were evaluated before and after splints.

RESULTS

In group ARS, mandibular advancement was observed after treatment in 21 of 24 patients (87.5%). The SNB angle increased by an average of 1.40 ± 1.01°. The ANB angle, overjet, Wits, and convexity decreased. Facial angle and soft tissue N Vert to pogonion increased. Vertically, MP-FH, MP-SN, y-axis, and vertical ratio decreased and ANS-Me/N-Me and S-Go/N-Me increased, suggesting a counterclockwise rotation of the mandible. In group SS, 18 of 23 patients (78.3%) showed a backward change tendency. The SNB angle reduced by 0.90 ± 0.93°. The ANB angle, overjet, Wits, convexity, and y-axis increased. The facial angle and soft tissue N Vert to soft tissue pogonion (ST N Vert to ST pogonion) decreased. Magnetic resonance imaging showed condylar height increased by 1.45 ± 3.05 mm (P = .002) in group ARS. In group SS, condylar height change was not consistent.

CONCLUSIONS

TMJ disc surgery followed by ARS promoted condylar bone remodeling and regeneration. The SNB angle increased, and the severity of skeletal Class II was improved. The SS enabled the mandible to withdraw backward and revealed a retrognathic but true mandible position.

Association of temporomandibular joint osteoarthrosis with dentoskeletal morphology in males: A cone-beam computed tomography and cephalometric analysis

OBJECTIVE

The objective of the study was to assess the differences in dentoskeletal morphology in males with and without temporomandibular joint osteoarthrosis (TMJOA).

METHODS

Three hundred seventy-one male participants seeking orthodontic treatment were enrolled in this cross-sectional study. Each participant's osseous status was evaluated using cone-beam computed tomography (CBCT) and classified into normal (N = 104), indeterminate for TMJOA (N = 110) and TMJOA (N = 157) groups. The dentoskeletal characteristics were evaluated using cephalograms. Stratified analysis was performed based on age and skeletal pattern. Descriptive statistics and one-way analysis of variance were performed to investigate dentoskeletal differences among groups. P < .05 was considered statistically significant.

RESULTS

The differences in posterior cranial base length, FMA, MP-OP, anterior facial height, articular angle, ramus height and L1-MP were statistically significant. After stratification by age, the differences in FMA, maxillomandibular angle, posterior facial height, facial height ratio, gonial angle and mandibular body length were statistically significant in adults. No statistical difference except for articular angle was observed in adolescents. After stratification by skeletal pattern, statistical differences were mainly apparent in skeletal Class II adults.

CONCLUSION

Males with TMJOA showed a posteriorly positioned and backward-rotated mandible, especially in skeletal Class II adults. Compared with women, the craniofacial morphology of men is less affected by TMJOA. The association between TMJOA and craniofacial morphology also varied across different age groups and skeletal patterns. Prospective studies are required to clarify the cause-effect relationship between TMJOA and craniofacial morphology in males.

Sex dependent differences of temporomandibular condylar bone mineral density distribution

OBJECTIVE

The objective of this study was to examine whether bone mineral density (BMD) distribution in the mandibular condyle and facial morphology are associated with temporomandibular joint osteoarthritis (TMJ OA) using clinical cone beam computed tomography (CBCT) images.

METHODS

CBCT images of 35 adults (16 male and 19 female) were examined to obtain TMJ OA counts, cephalometric analyses, and histograms of gray values that are proportional to BMD. Mean, standard deviation (SD), and low and high gray values at the 5th and 95th percentiles (Low5 and High5) of the histograms were measured.

RESULTS

The female group had significantly higher values of TMJ OA counts, mean, and SD on the right mandibular condyle, High5 on both sides, and all gray value parameters for total (right + left) than the male group.

CONCLUSION

Comprehensive analysis of BMD distribution in the mandibular condyle can provide useful information for prognosis of TMJ OA.

Craniofacial Morphology of Orthodontic Patients with and without Temporomandibular Disorders: A Cross-Sectional Study

Purpose

We aimed to explore the relationship between temporomandibular disorders (TMDs) and craniofacial morphology in orthodontic patients.

Methods

Altogether, 262 orthodontic patients were included and divided into two groups according to their Fonseca Anamnestic Index (FAI) scores: a no-TMD group (control group, FAI < 20) and a TMD group (FAI ≥ 20). Cephalometric parameters including cranial, maxillary, mandibular, and dental parameters were traced on cephalograms. Craniofacial morphology was compared between TMD and control groups, followed by subgroup analyses based on TMD severity, gender, age, and temporomandibular joint (TMJ) symptoms.

Results

The prevalence of TMDs was 52.7% among included patients (138/262). The mean age of TMD patients was higher than that of the control group. No significant difference in gender distribution between the groups was observed. The most commonly reported FAI items were misaligned teeth, neck pain, and emotional tension. The Frankfort-mandibular plane angle (FMA) was larger in the TMD patients than in the control group, whereas no significant differences in other parameters were observed. Subgroup analysis based on TMD severity revealed that FMA and anterior facial height of moderate/severe TMD patients were significantly larger than those of mild or no-TMD patients. Among male patients, the anterior cranial base length was smaller, and the anterior facial height was larger in the TMD group. Among female patients, no significant differences in craniofacial morphology between the groups were observed. In juvenile patients, overjet and overbite were smaller in the TMD group. In adult patients, SNA, ANB, FMA, and gonial angle were larger in the TMD group. Within the TMD group, patients with TMJ pain or noises exhibited characteristic craniofacial features compared to patients without these symptoms.

Conclusions

Orthodontic patients with TMDs have specific craniofacial morphology, suggesting a relationship between TMDs and particular craniofacial features in orthodontic patients.

Assessment of the Morphology and Degenerative Changes in the Temporomandibular Joint Using CBCT according to the Orthodontic Approach: A Scoping Review

Background. Available knowledge about disorders of temporomandibular joint structures and their association with orthodontic variables are still lacking. Objectives. This article is aimed at to identifying studies and presenting current information on the relationship between morphology diversity and the occurrence of degenerative changes in structures of the temporomandibular joint (TMJ) assessed by cone-beam computed tomography (CBCT) in the context of craniofacial morphology and malocclusion. Search Methods. The review was conducted by analyzing the PubMed (including Medline), Cochrane Library, Web of Science, and Scopus electronic databases up to November 2021 using two different comprehensive search strategies based on keywords as well as additional manual searches. Eligibility Criteria. Selection of the literature was carried out according to the PRISMA-ScR checklist. Methodological quality of the selected studies was evaluated using JBI Critical Appraisal Tool. Results. The electronic databases search revealed 3331 records. After applying the eligibility criteria and JBI assessment, a total of 33 studies were extracted and selected to the study. The review was divided into 4 parts, in which the following correlations were assessed in terms of orthodontic variables: TMJ degenerative changes, joint space and condylar position, condylar shape, TMJ articular eminence, and fossa. Conclusions. Skeletal and dental class II malocclusion with a retrognathic mandible, a hypodivergent skeletal pattern with a steep mandibular plane, and significant lateral mandibular displacement can be risk factors for developing radiographically detectable degenerative changes. Patients with skeletal and dental class III malocclusion as well as a hyperdivergent skeletal pattern may be at greater risk of TMD occurrence compared with other groups. Further studies are necessary to clarify the relationship between the position of the condylar processes and the presence of degenerative changes in the temporomandibular joints among orthodontic patients.

Hyoid Bone Position in Patients with and without Temporomandibular Joint Osteoarthrosis: A Cone-Beam Computed Tomography and Cephalometric Analysis

Objective

To assess the differences in hyoid bone position in patients with and without temporomandibular joint osteoarthrosis (TMJOA).

Methods

The present cross-sectional study was conducted in 427 participants whose osseous status was evaluated using cone-beam computed tomography and classified into normal, indeterminate osteoarthrosis (OA), and OA. The hyoid bone position and craniofacial characteristics were evaluated using cephalograms. Patients were divided into the normal group (N = 89), indeterminate OA group (N = 182), and OA group (N = 156). Descriptive statistics, one-way analysis of variance, and age- and sex-based stratified analyses were performed. P < 0.05 was considered statistically significant.

Results

The differences in Hy to MP, Hy-RGn, Hy to C3-RGn, C3-RGn, and Go-Hy-Me among the three groups were statistically significant. The differences in the Frankfort-mandibular plane angle, saddle angle, articular angle, gonial angle, ramus height, and posterior facial height were statistically significant. After adjusting age and sex, the Hy-RGn and C3-RGn in the normal group were significantly greater than the OA group. No statistical differences were observed in the hyoid measurements in the stratified analyses in males or subjects less than 18 years old. The differences in Hy to MP, Hy to C3-RGn, and Go-Hy-Me in female patients among the three groups were statistically significant. The differences in Hy to SN, Hy to FH, Hy to PP, Hy to MP, Hy-RGn, Hy-C3, Hy to C3-RGn, Go-Hy-Me, Hy-S, and C3-Hy-S in adults were statistically significant.

Conclusion

The differences in the hyoid bone position, mainly relative to the mandible, were statistically significant in patients with or without TMJOA. The difference pattern varied among different age and sex groups. Clinical evaluation of the hyoid position must consider the age and sex of patients. Longitudinal studies are required to clarify the causal relationship between TMJOA and hyoid bone position.

[Evaluation of mandibular stability and condylar volume after orthognathic surgery in patients with severe temporomandibular joint osteoarthrosis]

OBJECTIVE

To investigate the effect of preoperative condylar condition for mandible retrognathism deformities with severe temporomandibular joint osteoarthrosis on the stability of the jaw after orthognathic surgery and on the postoperative condylar volume changes.

METHODS

In this retrospective study, from 2014 to 2019, 37 patients including 1 male and 36 female, aged between 21 to 34 years old with an average age of (28.03±6.52) years, were diagnosed with mandible retrognathism deformities with severe temporomandibular joint osteoarthrosis by Peking University School and Hospital of Stomatology and received orthognathic surgery, meeting the inclusion criteria were included. According to the preoperative condylar condition. There were divided into smooth group and non-smooth group, the lateral cephalometric films 1 week (T0), 3 months (T1), 6 months (T2) and 1 year (T3) after surgery were used to establish the coordinate system and cephalometric analysis to determine the stability of the jaw after operation. The three-dimensional model of the condyle was segmented by cone beam computed tomography (CBCT) 1 week (T0), 3 months (T1), 6 months (T2) and 1 year (T3) after surgery and the volume was obtained to evaluate the change of the condyle volume after surgery. CBCT image data was used to evaluate the changes of the condylar condition after surgery, and to clarify the correlation between the postoperative condylar condition and jaw stability. SPSS 20.0 statistical software was used for statistical analysis, Fisher's exact probability methods were used to compare whether there were statistically significant differences in the stability of the mandibular joint at stages T1, T2 and T3 with different preoperative condylar condition.Spearman correlation coefficient analysis and Mann-Whitney test were used to compare whether there were statistically significant differences in the volume changes at stages T1, T2 and T3 after surgery between the two groups.

RESULTS

The recurrence rates of the mandible in the condylar smooth group were T1 36.85%, T2 47.37% and T3 42.11%, respectively. The recurrence rates in the non-smooth condylar group were T1 27.78%, T2 44.44% and T3 55.56%, respectively. There was no statistical difference in the recurrence rates between the two groups at different time points. There was no significant difference in the condylar volume change between smooth group and non-smooth group.

CONCLUSION

For patients with mandible retrognathism deformities with severe temporomandibular joint osteoarthrosis and no significant changes in the condyle observed for one year before surgery, there is no difference in the influence of the preoperative condylar condition on the stability of jaw after operation, and no definite influence on the volume of the condyle after operation. Condylar resorption 3 months after surgery can cause instability of the jaw after orthognathic surgery.

Surgical Orthodontic Treatment Involving Mandibular Premolar Extraction in Patient with Mandibular Retrusion Associated with Temporomandibular Joint Osteoarthritis

Here, we report retention following surgical orthodontic treatment in a patient with vertical maxillary excess associated with temporomandibular joint osteoarthritis (TMJOA) and marked mandibular retrusion. The patient was a man aged 20 years 10 months who presented with the chief complaint of maxillary protrusion. The facial profile was of the convex type due to marked mandibular retrusion. In addition, the patient had a gummy smile. Intraoral findings revealed a Class II molar relation, +11 mm overjet, and 0 mm overbite. Mandibular dentition arch length discrepancy showed crowding of -2 mm, and the maxillary dentition showed a spaced arch of +5 mm. Panoramic radiographs confirmed flattening of the condylar head and proliferation of the bone margin. Cephalometric analysis of the skeletal pattern revealed that, horizontally, the maxilla was anterior and the mandible posterior; vertically, a dolichofacial pattern was noted. The anterior maxillary tooth axis was standard, but the anterior mandibular tooth axis showed labial inclination. Based on these findings, skeletal maxillary protrusion associated with TMJOA was diagnosed. Surgical orthodontic treatment comprised bilateral mandibular first premolar extraction with two-jaw surgery and genioplasty. Orthodontic treatment was performed with a multibracket system using a 0.22-slot pre-adjusted edgewise appliance. At 2 years and 11 months after initiation of treatment, the maxilla was transposed 6 mm upwards by orthognathic surgery and the mandible 17 mm anteriorly and 5 mm upwards by counterclockwise rotation. At 3 years and 10 months, the Pogonion was moved 6 mm anteriorly by genioplasty. At 4 years, orthodontic treatment was concluded on confirming satisfactory occlusion and improvement in facial features. At 2 years after completion of treatment, occlusion and the maxillofacial morphology remain stable, with almost no relapse. In addition, no temporomandibular joint disorder symptoms have occurred. Careful comprehensive follow-up observation will be continued.

Temporomandibular Disorder Signs, Occlusal Support, and Craniofacial Structure Changes Among the Elderly Vietnamese

Objective

The aim of study was to determine the association between signs of temporomandibular disorders (TMD), occlusal support, and alterations in the craniofacial structure of elderly Vietnamese by using cephalometric analysis.

Methods

The cross-sectional study consisted of 244 participants aged 65-74 years. Participants were examined for signs of TMD, including limited mouth opening, temporomandibular joint (TMJ) crepitus, TMJ tenderness, and muscle tenderness. Dentition was divided into four occlusal support zones based on occluding pairs of posterior teeth by using Eichner's classification: Class A = 4 support zones; Class B = 1-3 support zones or only contact in anterior teeth; Class C = 0 support zones. Fifteen angular and seven linear parameters were used for sagittal craniofacial skeleton analysis.

Results

10.3% of participants had limited mouth opening, 49.6% TMJ crepitus, 16.3% TMJ tenderness, and 24.2% muscle tenderness; 45.5% had Class A occlusal support, 38.5% Class B, and 16.0% Class C. Those with Class C had significantly smaller ramus inclination, articular angle, and angles formed by the mandibular plane and shorter facial height compared to Class A and Class B (P < .001). TMD signs were significantly associated with: angles formed by mandibular plane, gonial angle, cranial base angle, effective mandibular length, and anterior facial height (P < .05).

Conclusions

The alteration of craniofacial structures was significantly associated with TMD signs among elderly Vietnamese. The higher number of lost occlusal support zones, the more significant the changes to craniofacial structures.

Computer-assisted teaching of bilateral sagittal split osteotomy: Learning curve for condylar positioning

Bilateral sagittal split osteotomy (BSSO) is a widely-performed procedure in orthognathic surgery for the correction of dentofacial deformity. Condylar positioning is a critical step during BSSO to maximize functional and morphological results. The unsuitable positioning of condyles represents one of the causative mechanisms that may induce temporomandibular joint noxious effects after BSSO. Repositioning devices can assist surgeons in maintaining the preoperative condylar position; however, empirical repositioning methods based on experience gained are still commonly used. Trainee learning curves are difficult to assess. The aim of this study was to evaluate the relevance of computer-assisted surgery in the acquisition of condylar positioning skills. Forty-eight patients underwent BSSO performed by six maxillofacial trainees (four junior residents and two senior experienced residents). A condyle positioning system (CPS) was used by a senior surgeon to record a condylar position score during the procedure. Firstly, scores were recorded when the trainee manually positioned the condyle without access to the CPS score (phase 1) and then when the trainee positioned the condyle and performed osteosynthesis with visual access to the CPS score (phase 2). Six parameters describing condylar three-dimensional motions were assessed: translational motion from top to bottom (TB), back to front (BF), and left to right (LR), axial rotation (AR), sagittal rotation (SR), frontal rotation (FR), and a total score (TS). There were no significant differences between junior and senior residents in condyle positioning without access to the CPS. Condyles were significantly better positioned during phase 2 with access to the CPS (p<0.001). Over time, use of the CPS (phase 2) produced significantly quicker improvements in scores (p = 0.042). For those teaching surgeries to trainees, computer-assisted devices can potentially result in more rapid learning curves than traditional "observations-imitation" models. Use of a CPS by trainees facilitated condylar repositioning that resulted in an accurate occlusal result and avoidance of adverse effects on the temporomandibular joint.

Temporomandibular joint regeneration: proposal of a novel treatment for condylar resorption after orthognathic surgery using transplantation of autologous nasal septum chondrocytes, and the first human case report

Background

Upon orthognathic mandibular advancement surgery the adjacent soft tissues can displace the distal bone segment and increase the load on the temporomandibular joint causing loss of its integrity. Remodeling of the condyle and temporal fossa with destruction of condylar cartilage and subchondral bone leads to postsurgical condylar resorption, with arthralgia and functional limitations. Patients with severe lesions are refractory to conservative treatments, leading to more invasive therapies that range from simple arthrocentesis to open surgery and prosthesis. Although aggressive and with a high risk for the patient, surgical invasive treatments are not always efficient in managing the degenerative lesions.

Methods

We propose a regenerative medicine approach using in-vitro expanded autologous cells from nasal septum applied to the first proof-of-concept patient. After the required quality controls, the cells were injected into each joint by arthrocentesis. Results were monitored by functional assays and image analysis using computed tomography.

Results

The cell injection fully reverted the condylar resorption, leading to functional and structural regeneration after 6 months. Computed tomography images showed new cortical bone formation filling the former cavity space, and a partial recovery of condylar and temporal bones. The superposition of the condyle models showed the regeneration of the bone defect, reconstructing the condyle original form.

Conclusions

We propose a new treatment of condylar resorption subsequent to orthognathic surgery, presently treated only by alloplastic total joint replacement. We propose an intra-articular injection of autologous in-vitro expanded cells from the nasal septum. The proof-of-concept treatment of a selected patient that had no alternative therapeutic proposal has given promising results, reaching full regeneration of both the condylar cartilage and bone at 6 months after the therapy, which was fully maintained after 1 year. This first case is being followed by inclusion of new patients with a similar pathological profile to complete an ongoing stage I/II study.

Trial registration

This clinical trial is approved by the National Commission of Ethics in Medical Research (CONEP), Brazil, CAAE 12484813.0.0000.5245, and retrospectively registered in the Brazilian National Clinical Trials Registry and in the USA Clinical Trials Registry under the Universal Trial Number (UTN) U1111–1194-6997.

Electronic supplementary material

The online version of this article (10.1186/s13287-018-0806-4) contains supplementary material, which is available to authorized users.

Comparison of Morphologic Parameters of Temporomandibular Joint for Asymptomatic Subjects Using the Two-Dimensional and Three-Dimensional Measuring Methods

The differences of temporomandibular joint (TMJ) morphologic parameters by using two-dimensional (2D) and three-dimensional (3D) measuring methods were compared. Ten asymptomatic subjects (26.75 ± 4.89 years) were randomly recruited. The 3D models of the maxilla, mandible, and teeth were reconstructed according to cone-beam computed tomography (CBCT) image data. The morphologic parameters of TMJs were measured by the 2D CBCT measuring method (group A) and the 3D reconstruction model measuring method (group B), respectively. The morphologic parameters in each group were assessed by paired samples t-test, and the statistical significance was achieved when p < 0.05. The horizontal condylar angle (HCA), sagittal ramus angle (SRA), medial joint space (MJS), lateral joint space (LJS), superior joint space (SJS), and anterior joint space (AJS) in group A were significantly smaller than those in group B (p < 0.05). The HCA on the left side was significantly smaller than that on the right side in group A (p < 0.05). However, all the morphologic parameters in group B were not significantly different between left and right sides. In conclusion, there were significant differences for the morphologic parameters of TMJ measured on 2D CBCT and 3D models. 3D measuring method should be used for the detection of TMJ morphology in clinical practice.