The Development of Quality Control Genotyping Approaches: A Case Study Using Elite Maize Lines

Identification of diagnostic KASP-SNP markers for routine breeding activities in yam (Dioscorea spp.)

Maintaining genetic purity and true-to-type clone identification are important action steps in breeding programs. This study aimed to develop a universal set of kompetitive allele-specific polymerase chain reaction (KASP)-based single nucleotide polymorphism (SNP) markers for routine breeding activities. Ultra-low-density SNP markers were created using an initial set of 173,675 SNPs that were obtained from whole-genome resequencing of 333 diverse white Guinea yam (Dioscorea rotundata Poir) genotypes. From whole-genome resequencing data, 99 putative SNP markers were found and successfully converted to high-throughput KASP genotyping assays. The markers set was validated on 374 genotypes representing six yam species. Out of the 99 markers, 50 were highly polymorphic across the species and could distinguish different yam species and pedigree origins. The selected SNP markers classified the validation population based on the different yam species and identified potential duplicates within yam species. Through penalized analysis, the male parent of progenies involved in polycrosses was successfully predicted and validated. Our research was a trailblazer in validating KASP-based SNP assays for species identification, parental fingerprinting, and quality control (QC) and quality assurance (QA) in yam breeding programs.

Low-Density Reference Fingerprinting SNP Dataset of CIMMYT Maize Lines for Quality Control and Genetic Diversity Analyses

CIMMYT maize lines (CMLs), which represent the tropical maize germplasm, are freely available worldwide. All currently released 615 CMLs and fourteen temperate maize inbred lines were genotyped with 180 kompetitive allele-specific PCR single nucleotide polymorphisms to develop a reference fingerprinting SNP dataset that can be used to perform quality control (QC) and genetic diversity analyses. The QC analysis identified 25 CMLs with purity, identity, or mislabeling issues. Further field observation, purification, and re-genotyping of these CMLs are required. The reference fingerprinting SNP dataset was developed for all of the currently released CMLs with 152 high-quality SNPs. The results of principal component analysis and average genetic distances between subgroups showed a clear genetic divergence between temperate and tropical maize, whereas the three tropical subgroups partially overlapped with one another. More than 99% of the pairs of CMLs had genetic distances greater than 0.30, showing their high genetic diversity, and most CMLs are distantly related. The heterotic patterns, estimated with the molecular markers, are consistent with those estimated using pedigree information in two major maize breeding programs at CIMMYT. These research findings are helpful for ensuring the regeneration and distribution of the true CMLs, via QC analysis, and for facilitating the effective utilization of the CMLs, globally.

Developing and deploying an efficient genotyping workflow for accelerating maize improvement in developing countries

Background: Molecular breeding is an essential tool for accelerating genetic gain in crop improvement towards meeting the need to feed an ever-growing world population. Establishing low-cost, flexible genotyping platforms in small, public and regional laboratories can stimulate the application of molecular breeding in developing countries. These laboratories can serve plant breeding projects requiring low- to medium-density markers for marker-assisted selection (MAS) and quality control (QC) activities. Methods: We performed two QC and MAS experiments consisting of 637 maize lines, using an optimised genotyping workflow involving an in-house competitive allele-specific PCR (KASP) genotyping system with an optimised sample collection, preparation, and DNA extraction and quantitation process. A smaller volume of leaf-disc size plant samples was collected directly in 96-well plates for DNA extraction, using a slightly modified CTAB-based DArT DNA extraction protocol. DNA quality and quantity analyses were performed using a microplate reader, and the KASP genotyping and data analysis was performed in our laboratory. Results: Applying the optimized genotyping workflow expedited the QC and MAS experiments from over five weeks (when outsourcing) to two weeks and eliminated the shipping cost. Using a set of 28 KASP single nucleotide polymorphisms (SNPs) validated for maize, the QC experiment revealed the genetic identity of four maize varieties taken from five seed sources. Another set of 10 KASP SNPs was sufficient in verifying the parentage of 390 F1 lines. The KASP-based MAS was successfully applied to a maize pro-vitamin A (PVA) breeding program and for introgressing the aflatoxin resistance gene into elite tropical maize lines. Conclusion: This improved workflow has helped accelerate maize improvement activities of IITA's Maize Improvement Program and facilitated DNA fingerprinting for tracking improved crop varieties. National Agricultural Research Systems (NARS) in developing countries can adopt this workflow to fast-track molecular marker-based genotyping for crop improvement.

Analysis of genetic diversity and population structure among cultivated potato clones from Korea and global breeding programs

Characterizing the genetic diversity and population structure of breeding materials is essential for breeding to improve crop plants. The potato is an important non-cereal food crop worldwide, but breeding potatoes remains challenging owing to their auto-tetraploidy and highly heterozygous genome. We evaluated the genetic structure of a 110-line Korean potato germplasm using the SolCAP 8303 single nucleotide polymorphism (SNP) Infinium array and compared it with potato clones from other countries to understand the genetic landscape of cultivated potatoes. Following the tetraploid model, we conducted population structure analysis, revealing three subpopulations represented by two Korean potato groups and one separate foreign potato group within 110 lines. When analyzing 393 global potato clones, country/region-specific genetic patterns were revealed. The Korean potato clones exhibited higher heterozygosity than those from Japan, the United States, and other potato landraces. We also employed integrated extended haplotype homozygosity (iHS) and cross-population extended haplotype homozygosity (XP-EHH) to identify selection signatures spanning candidate genes associated with biotic and abiotic stress tolerance. Based on the informativeness of SNPs for dosage genotyping calls, 10 highly informative SNPs discriminating all 393 potatoes were identified. Our results could help understanding a potato breeding history that reflects regional adaptations and distinct market demands.

Developing and deploying an efficient genotyping workflow for accelerating maize improvement in developing countries

Background: Molecular breeding is an essential tool for accelerating genetic gain in crop improvement, towards meeting the need to feed an ever-growing world population. Establishing low-cost, flexible genotyping platforms in small, public and regional laboratories can stimulate the application of molecular breeding in developing countries. These laboratories can serve plant breeding projects requiring low- to medium-density markers for marker-assisted selection (MAS) and quality control (QC) activities. Methods: We performed two QC and MAS experiments consisting of 637 maize lines, using an optimised genotyping workflow involving an in-house competitive allele-specific PCR (KASP) genotyping system with an optimised sample collection, preparation, and DNA extraction and quantitation process. A smaller volume of leaf-disc size plant samples was collected directly in 96-well plates for DNA extraction, using a slightly modified CTAB-based DArT DNA extraction protocol. DNA quality and quantity analyses were performed using a microplate reader, and the KASP genotyping and data analysis was performed in our laboratory. Results: Applying the optimized genotyping workflow expedited the QC and MAS experiments from over five weeks (when outsourcing) to two weeks and eliminated the shipping cost. Using a set of 28 KASP single nucleotide polymorphisms (SNPs) validated for maize, the QC experiment revealed the genetic identity of four maize varieties taken from five seed sources. Another set of 10 KASP SNPs was sufficient in verifying the parentage of 390 F1 lines. The KASP-based MAS was successfully applied to a maize pro-vitamin A (PVA) breeding program and for introgressing the aflatoxin resistance gene into elite tropical maize lines. Conclusion: This improved workflow has helped accelerate maize improvement activities of IITA's Maize Improvement Program and facilitated DNA fingerprinting for tracking improved crop varieties. National Agricultural Research Systems (NARS) in developing countries can adopt this workflow to fast-track molecular marker-based genotyping for crop improvement.

Developing and deploying an efficient genotyping workflow for accelerating maize improvement in developing countries

Background: Molecular breeding is an essential tool for accelerating genetic gain in crop improvement, towards meeting the need to feed an ever-growing world population. Establishing low-cost, flexible genotyping platforms in small, public and regional laboratories can stimulate the application of molecular breeding in developing countries. These laboratories can serve plant breeding projects requiring low- to medium-density markers for marker-assisted selection (MAS) and quality control (QC) activities. Methods: We performed two QC and MAS experiments consisting of 637 maize lines, using an optimised genotyping workflow involving an in-house competitive allele-specific PCR (KASP) genotyping system with an optimised sample collection, preparation, and DNA extraction and quantitation process. A smaller volume of leaf-disc size plant samples was collected directly in 96-well plates for DNA extraction, using a slightly modified CTAB-based DArT DNA extraction protocol. DNA quality and quantity analyses were performed using a microplate reader, and the KASP genotyping and data analysis was performed in our laboratory. Results: Applying the optimized genotyping workflow expedited the QC and MAS experiments from over five weeks (when outsourcing) to two weeks and eliminated the shipping cost. Using a set of 28 KASP single nucleotide polymorphisms (SNPs) validated for maize, the QC experiment revealed the genetic identity of four maize varieties taken from five seed sources. Another set of 10 KASP SNPs was sufficient in verifying the parentage of 390 F1 lines. The KASP-based MAS was successfully applied to a maize pro-vitamin A (PVA) breeding program and for introgressing the aflatoxin resistance gene into elite tropical maize lines. Conclusion: This improved workflow has helped accelerate maize improvement activities of IITA's Maize Improvement Program and facilitated DNA fingerprinting for tracking improved crop varieties. National Agricultural Research Systems (NARS) in developing countries can adopt this workflow to fast-track molecular marker-based genotyping for crop improvement.

Core Collections: Is There Any Value for Cotton Breeding?

Global plant breeding activities are reliant on the available genetic variation held in extant varieties and germplasm collections. Throughout the mid- to late 1900s, germplasm collecting efforts were prioritized for breeding programs to archive precious material before it disappeared and led to the development of the numerous large germplasm resources now available in different countries. In recent decades, however, the maintenance and particularly the expansion of these germplasm resources have come under threat, and there has been a significant decline in investment in further collecting expeditions, an increase in global biosecurity restrictions, and restrictions placed on the open exchange of some commercial germplasm between breeders. The large size of most genebank collections, as well as constraints surrounding the availability and reliability of accurate germplasm passport data and physical or genetic characterization of the accessions in collections, limits germplasm utilization by plant breeders. To overcome these constraints, core collections, defined as a representative subset of the total germplasm collection, have gained popularity. Core collections aim to increase germplasm utilization by containing highly characterized germplasm that attempts to capture the majority of the variation in a whole collection. With the recent availability of many new genetic tools, the potential to unlock the value of these resources can now be realized. The Commonwealth Scientific and Industrial Research Organisation (CSIRO) cotton breeding program supplies 100% of the cotton cultivars grown in Australia. The program is reliant on the use of plant genetic resources for the development of improved cotton varieties to address emerging challenges in pest and disease resistance as well as the global changes occurring in the climate. Currently, the CSIRO germplasm collection is actively maintained but underutilized by plant breeders. This review presents an overview of the Australian cotton germplasm resources and discusses the appropriateness of a core collection for cotton breeding programs.

Molecular Fingerprinting and Hybridity Authentication in Cowpea Using Single Nucleotide Polymorphism Based Kompetitive Allele-Specific PCR Assay

Optimization of a breeding program for increased genetic gain requires quality assurance (QA) and quality control (QC) at key phases of the breeding process. One vital phase in a breeding program that requires QC and QA is the choice of parents and successful hybridizations to combine parental attributes and create variations. The objective of this study was to determine parental diversity and confirm hybridity of cowpea F₁ progenies using KASP (Kompetitive Allele-Specific PCR)-based single nucleotide polymorphism (SNP) markers. A total of 1,436 F₁ plants were derived from crossing 220 cowpea breeding lines and landraces to 2 elite sister lines IT99K-573-1-1 and IT99K-573-2-1 as male parents, constituting 225 cross combinations. The progenies and the parents were genotyped with 17 QC SNP markers via high-throughput KASP genotyping assay. The QC markers differentiated the parents with mean efficiency of 37.90% and a range of 3.4-82.8%, revealing unique fingerprints of the parents. Neighbor-Joining cladogram divided the 222 parents into 3 clusters. Genetic distances between parents ranged from 0 to 3.74 with a mean of 2.41. Principal component analysis (PCA) depicted a considerable overlap between parents and F₁ progenies with more scatters among parents than the F₁s. The differentiation among parents and F₁s was best contributed to by 82% of the markers. As expected, parents and F₁s showed a significant contrast in proportion of heterozygous individuals, with mean values of 0.02 and 0.32, respectively. KASP markers detected true hybridity with 100% success rate in 72% of the populations. Overall, 79% of the putative F₁ plants were true hybrids, 14% were selfed plants, and 7% were undetermined due to missing data and lack of marker polymorphism between parents. The study demonstrated an effective application of KASP-based SNP assay in fingerprinting, confirmation of hybridity, and early detection of false F₁ plants. The results further uncovered the need to deploy markers as a QC step in a breeding program.

Development and validation of diagnostic SNP markers for quality control genotyping in a collection of four rice (Oryza) species

Morphological identification of closely related rice species, particularly those in the Oryza AA genome group, presents major challenges and often results in cases of misidentification. Recent work by this group identified diagnostic single nucleotide polymorphic (SNP) markers specific for several rice species and subspecies based on DArTseq next-generation sequencing technology ("DArTseq"). These SNPs can be used for quality control (QC) analysis in rice breeding and germplasm maintenance programs. Here, we present the DArTseq-based diagnostic SNPs converted into Kompetitive allele-specific PCR (KASPar or KASP) assays and validation data for a subset of them; these can be used for low-cost routine genotyping quality control (QC) analysis. Of the 224 species/subspecies' diagnostic SNPs tested, 158 of them produced working KASP assays, a conversion success rate of 70%. Two validation experiments were run with 87 of the 158 SNP markers to ensure that the assays amplified, were polymorphic, and distinguished the five species/subspecies tested. Based on these validation test results, we recommend a panel of 36 SNP markers that clearly delineate O. barthii, O. glaberrima, O. longistaminata, O. sativa spp. indica and japonica. The KASP assays provide a flexible, rapid turnaround and cost-effective tool to facilitate germplasm curation and management of these four Oryza AA genome species across multiple genebanks.

SNP-based assessment of genetic purity and diversity in maize hybrid breeding

Assessment of genetic purity of parental inbred lines and their resultant F₁ hybrids is an essential quality control check in maize hybrid breeding, variety release and seed production. In this study, genetic purity, parent-offspring relationship and diversity among the inbred lines were assessed using 92 single-nucleotide polymorphism (SNP) markers. A total of 188 maize genotypes, comprising of 26 inbred lines, four doubled haploid (DH) lines and 158 single-cross maize hybrids were investigated in this study using Kompetitive Allele Specific Polymerase Chain Reaction (KASP) genotyping assays. The bi-allelic data was analyzed for genetic purity and diversity parameters using GenAlex software. The SNP markers were highly polymorphic and 90% had polymorphic information content (PIC) values of > 0.3. Pairwise genetic distances among the lines ranged from 0.05 to 0.56, indicating a high level of dissimilarity among the inbred lines. A maximum genetic distance of (0.56) was observed between inbred lines CKDHL0089 and CML443 while the lowest (0.05) was between I-42 and I-40. The majority (67%) of the inbred lines studied were genetically pure with residual heterozygosity of <5%, while only 33% had heterozygosity levels of >5%. Inbred lines, which were not pure, require purification through further inbreeding. Cluster analysis partitioned the lines into three distinct genetic clusters with the potential to contribute new beneficial alleles to the maize breeding program. Out of the 68 hybrids (43%) that passed the parent-offspring test, seven hybrids namely; SCHP29, SCHP95, SCHP94, SCHP134, SCHP44, SCHP114 and SCHP126, were selected as potential candidates for further evaluation and release due to their outstanding yield performance.

Quantitative trait loci (QTL) analysis of leaf related traits in spinach (Spinacia oleracea L.)

BACKGROUND

Spinach (Spinacia oleracea L.) is an important leafy vegetable crop, and leaf-related traits including leaf length, leaf width, and petiole length, are important commercial traits. However, the underlying genes remain unclear. The objective of the study was to conduct QTL mapping of leaf-related traits in spinach.

RESULTS

A BC₁ population was used to construct the linkage map and for QTL mapping of leaf length, leaf width, petiole length, and the ratio of leaf length to width in 2015 and 2019. Two genetic linkage maps were constructed by specific locus amplified fragment sequencing (SLAF-seq), and kompetitive allele specific PCR (KASP) technology, respectively using BC₁ population in 2015. Based on the results of 2015, the specific linkage groups (LG) detected QTLs were generated using BC₁ population in 2019. A total of 13 QTLs were detected for leaf-related traits, only five QTLs being repeatedly detected in multiple years or linkage maps. Interestingly, the major QTLs of leaf length, petiole length, and the ratio of leaf length to width were highly associated with the same SNP markers (KM3102838, KM1360385 and KM2191098). A major QTL of leaf width was mapped on chromosome 1 from 41.470-42.045 Mb. And 44 genes were identified within the region. Based on the GO analysis, these genes were significantly enriched on ribonuclease, lyase activity, phosphodiester bond hydrolysis process, and cell wall component, thus it might change cell size to determine leaves shape.

CONCLUSIONS

Five QTLs for leaf-related traits were repeatedly detected at least two years or linkage maps. The major QTLs of leaf length, petiole length, and the ratio of leaf length to width were mapped on the same loci. And three genes (Spo10792, Spo21018, and Spo21019) were identified as important candidate genes for leaf width.

Distinguishing Between Nile Tilapia Strains Using a Low-Density Single-Nucleotide Polymorphism Panel

Nile tilapia (Oreochromis niloticus) is among the most important finfish in aquaculture, particularly in Asia. Numerous genetically improved strains of Nile tilapia have been developed and disseminated through formal and informal channels to hatcheries, many of which operate at a relatively small scale in developing countries. The primary objective of this study was to assess the extent to which molecular genetic tools can identify different and interrelated strains of Nile tilapia in Bangladesh and the Philippines, two globally significant producers. A tool was developed using a low-density panel of single-nucleotide polymorphisms (SNPs), genotyping-by-sequencing and discriminant analysis of principal components (DAPC). When applied to 2,057 samples from 205 hatcheries in Bangladesh and the Philippines, for hatcheries where the hatchery-identified strain was one of the sampled core populations used to develop the tool, hatchery-identified and DAPC-assigned hatchery-level strains were in agreement in 74.1% of cases in Bangladesh and 80.6% of cases in the Philippines. The dominant hatchery-identified and DAPC-assigned strains were GIFT, in Bangladesh, and GET-ExCEL-a composite strain partially derived from GIFT-in the Philippines.

High density genotype storage for plant breeding in the Chado schema of Breedbase

Modern breeding programs routinely use genome-wide information for selecting individuals to advance. The large volumes of genotypic information required present a challenge for data storage and query efficiency. Major use cases require genotyping data to be linked with trait phenotyping data. In contrast to phenotyping data that are often stored in relational database schemas, next-generation genotyping data are traditionally stored in non-relational storage systems due to their extremely large scope. This study presents a novel data model implemented in Breedbase (https://breedbase.org/) for uniting relational phenotyping data and non-relational genotyping data within the open-source PostgreSQL database engine. Breedbase is an open-source, web-database designed to manage all of a breeder's informatics needs: management of field experiments, phenotypic and genotypic data collection and storage, and statistical analyses. The genotyping data is stored in a PostgreSQL data-type known as binary JavaScript Object Notation (JSONb), where the JSON structures closely follow the Variant Call Format (VCF) data model. The Breedbase genotyping data model can handle different ploidy levels, structural variants, and any genotype encoded in VCF. JSONb is both compressed and indexed, resulting in a space and time efficient system. Furthermore, file caching maximizes data retrieval performance. Integration of all breeding data within the Chado database schema retains referential integrity that may be lost when genotyping and phenotyping data are stored in separate systems. Benchmarking demonstrates that the system is fast enough for computation of a genomic relationship matrix (GRM) and genome wide association study (GWAS) for datasets involving 1,325 diploid Zea mays, 314 triploid Musa acuminata, and 924 diploid Manihot esculenta samples genotyped with 955,690, 142,119, and 287,952 genotype-by-sequencing (GBS) markers, respectively.

Genome-wide SNP analysis of Siamese cobra (Naja kaouthia) reveals the molecular basis of transitions between Z and W sex chromosomes and supports the presence of an ancestral super-sex chromosome in amniotes

Elucidation of the process of sex chromosome differentiation is necessary to understand the dynamics of evolutionary mechanisms in organisms. The W sex chromosome of the Siamese cobra (Naja kaouthia) contains a large number of repeats and shares amniote sex chromosomal linkages. Diversity Arrays Technology provides an effective approach to identify sex-specific loci that are epoch-making, to understand the dynamics of molecular transitions between the Z and W sex chromosomes in a snake lineage. From a total of 543 sex-specific loci, 90 showed partial homology with sex chromosomes of several amniotes and 89 loci were homologous to transposable elements. Two loci were confirmed as W-specific nucleotides after PCR amplification. These loci might result from a sex chromosome differentiation process and involve putative sex-determination regions in the Siamese cobra. Sex-specific loci shared linkage homologies among amniote sex chromosomes, supporting an ancestral super-sex chromosome.

Identification of QTLs for grain yield and other traits in tropical maize under Striga infestation

Striga is an important biotic factor limiting maize production in sub-Saharan Africa and can cause yield losses as high as 100%. Marker-assisted selection (MAS) approaches hold a great potential for improving Striga resistance but requires identification and use of markers associated with Striga resistance for adequate genetic gains from selection. However, there is no report on the discovery of quantitative trait loci (QTL) for resistance to Striga in maize under artificial field infestation. In the present study, 198 BC₁S₁ families obtained from a cross involving TZEEI 29 (Striga resistant inbred line) and TZEEI 23 (Striga susceptible inbred line) plus the two parental lines were screened under artificial Striga-infested conditions at two Striga-endemic locations in Nigeria in 2018, to identify QTL associated with Striga resistance indicator traits, including grain yield, ears per plant, Striga damage and number of emerged Striga plants. Genetic map was constructed using 1,386 DArTseq markers distributed across the 10 maize chromosomes, covering 2076 cM of the total genome with a mean spacing of 0.11 cM between the markers. Using composite interval mapping (CIM), fourteen QTL were identified for key Striga resistance/tolerance indicator traits: 3 QTL for grain yield, 4 for ears per plant and 7 for Striga damage at 10 weeks after planting (WAP), across environments. Putative candidate genes which encode major transcription factor families WRKY, bHLH, AP2-EREBPs, MYB, and bZIP involved in plant defense signaling were detected for Striga resistance/tolerance indicator traits. The QTL detected in the present study would be useful for rapid transfer of Striga resistance/tolerance genes into Striga susceptible but high yielding maize genotypes using MAS approaches after validation. Further studies on validation of the QTL in different genetic backgrounds and in different environments would help verify their reproducibility and effective use in breeding for Striga resistance/tolerance.

Development of diagnostic SNP markers for quality assurance and control in sweetpotato [Ipomoea batatas (L.) Lam.] breeding programs

Quality assurance and control (QA/QC) is an essential element of a breeding program's optimization efforts towards increased genetic gains. Due to auto-hexaploid genome complexity, a low-cost marker platform for routine QA/QC in sweetpotato breeding programs is still unavailable. We used 662 parents of the International Potato Center (CIP)'s global breeding program spanning Peru, Uganda, Mozambique and Ghana, to develop a low-density highly informative single nucleotide polymorphism (SNP) marker set to be deployed for routine QA/QC. Segregation of the selected 30 SNPs (two SNPs per base chromosome) in a recombined breeding population was evaluated using 282 progeny from some of the parents above. The progeny were replicated from in-vitro, screenhouse and field, and the selected SNP-set was confirmed to identify relatively similar mislabeling error rates as a high density SNP-set of 10,159 markers. Six additional trait-specific markers were added to the selected SNP set from previous quantitative trait loci mapping studies. The 36-SNP set will be deployed for QA/QC in breeding pipelines and in fingerprinting of advanced clones or released varieties to monitor genetic gains in famers' fields. The study also enabled evaluation of CIP's global breeding population structure and the effect of some of the most devastating stresses like sweetpotato virus disease on genetic variation management. These results will inform future deployment of genomic selection in sweetpotato.

Genotyping-by-Sequencing Derived Single Nucleotide Polymorphisms Provide the First Well-Resolved Phylogeny for the Genus Triticum (Poaceae)

Wheat (Triticum spp.) has been an important staple food crop for mankind since the beginning of agriculture. The genus Triticum L. is composed of diploid, tetraploid, and hexaploid species, majority of which have not yet been discriminated clearly, and hence their phylogeny and classification remain unresolved. Genotyping-by-sequencing (GBS) is an easy and affordable method that allows us to generate genome-wide single nucleotide polymorphism (SNP) markers. In this study, we used GBS to obtain SNPs covering all seven chromosomes from 283 accessions of Triticum-related genera. After filtering low-quality and redundant SNPs based on haplotype information, the GBS assay provided 14,188 high-quality SNPs that were distributed across the A (71%), B (26%), and D (2.4%) genomes. Cluster analysis and discriminant analysis of principal components (DAPC) allowed us to distinguish six distinct groups that matched well with Triticum species complexity. We constructed a Bayesian phylogenetic tree using 14,188 SNPs, in which 17 Triticum species and subspecies were discriminated. Dendrogram analysis revealed that the polyploid wheat species could be divided into groups according to the presence of A, B, D, and G genomes with strong nodal support and provided new insight into the evolution of spelt wheat. A total of 2,692 species-specific SNPs were identified to discriminate the common (T. aestivum) and durum (T. turgidum) wheat cultivar and landraces. In principal component analysis grouping, the two wheat species formed individual clusters and the SNPs were able to distinguish up to nine groups of 10 subspecies. This study demonstrated that GBS-derived SNPs could be used efficiently in genebank management to classify Triticum species and subspecies that are very difficult to distinguish by their morphological characters.

Genetic Analysis of QTL for Resistance to Maize Lethal Necrosis in Multiple Mapping Populations

Maize lethal necrosis (MLN) occurs when maize chlorotic mottle virus (MCMV) and sugarcane mosaic virus (SCMV) co-infect maize plant. Yield loss of up to 100% can be experienced under severe infections. Identification and validation of genomic regions and their flanking markers can facilitate marker assisted breeding for resistance to MLN. To understand the status of previously identified quantitative trait loci (QTL)in diverse genetic background, F₃ progenies derived from seven bi-parental populations were genotyped using 500 selected kompetitive allele specific PCR (KASP) SNPs. The F₃ progenies were evaluated under artificial MLN inoculation for three seasons. Phenotypic analyses revealed significant variability (P ≤ 0.01) among genotypes for responses to MLN infections, with high heritability estimates (0.62 to 0.82) for MLN disease severity and AUDPC values. Linkage mapping and joint linkage association mapping revealed at least seven major QTL (qMLN3_130 and qMLN3_142, qMLN5_190 and qMLN5_202, qMLN6_85 and qMLN6_157 qMLN8_10 and qMLN9_142) spread across the 7-biparetal populations, for resistance to MLN infections and were consistent with those reported previously. The seven QTL appeared to be stable across genetic backgrounds and across environments. Therefore, these QTL could be useful for marker assisted breeding for resistance to MLN.

1k-RiCA (1K-Rice Custom Amplicon) a novel genotyping amplicon-based SNP assay for genetics and breeding applications in rice

BACKGROUND

While a multitude of genotyping platforms have been developed for rice, the majority of them have not been optimized for breeding where cost, turnaround time, throughput and ease of use, relative to density and informativeness are critical parameters of their utility. With that in mind we report the development of the 1K-Rice Custom Amplicon, or 1k-RiCA, a robust custom sequencing-based amplicon panel of ~ 1000-SNPs that are uniformly distributed across the rice genome, designed to be highly informative within indica rice breeding pools, and tailored for genomic prediction in elite indica rice breeding programs.

RESULTS

Empirical validation tests performed on the 1k-RiCA showed average marker call rates of 95% with marker repeatability and concordance rates of 99%. These technical properties were not affected when two common DNA extraction protocols were used. The average distance between SNPs in the 1k-RiCA was 1.5 cM, similar to the theoretical distance which would be expected between 1,000 uniformly distributed markers across the rice genome. The average minor allele frequencies on a panel of indica lines was 0.36 and polymorphic SNPs estimated on pairwise comparisons between indica by indica accessions and indica by japonica accessions were on average 430 and 450 respectively. The specific design parameters of the 1k-RiCA allow for a detailed view of genetic relationships and unambiguous molecular IDs within indica accessions and good cost vs. marker-density balance for genomic prediction applications in elite indica germplasm. Predictive abilities of Genomic Selection models for flowering time, grain yield, and plant height were on average 0.71, 0.36, and 0.65 respectively based on cross-validation analysis. Furthermore the inclusion of important trait markers associated with 11 different genes and QTL adds value to parental selection in crossing schemes and marker-assisted selection in forward breeding applications.

CONCLUSIONS

This study validated the marker quality and robustness of the 1k-RiCA genotypic platform for genotyping populations derived from indica rice subpopulation for genetic and breeding purposes including MAS and genomic selection. The 1k-RiCA has proven to be an alternative cost-effective genotyping system for breeding applications.

Combining Three Mapping Strategies to Reveal Quantitative Trait Loci and Candidate Genes for Maize Ear Length

Ear length (EL) is an important trait in maize ( L.) because it is positively correlated with grain yield. To understand the genetic basis of natural EL variation, a F, a four-way cross and a genome-wide association study (GWAS) population were used to identify the quantitative trait loci (QTLs) and candidate EL genes. Linkage mapping identified 14 QTLs in two types of populations from multiple environments. Six of them were located in three common genomic regions considered "stable QTLs". Candidate genes for the three stable QTLs were identified by the GWAS results. These were related to auxin transport, cell proliferation, and developmental regulation. These results confirm that maize EL is under strong genetic control by many small-effect genes. They also improve our understanding of the genetic basis of maize EL.

Effective BAC clone anchoring with genotyping-by-sequencing and Diversity Arrays Technology in a large genome cereal rye

Identification of bacterial artificial chromosome (BAC) clones containing specific sequences is a prerequisite for many applications, such as physical map anchoring or gene cloning. Existing BAC library screening strategies are either low-throughput or require a considerable initial input of resources for platform establishment. We describe a high-throughput, reliable, and cost-effective BAC library screening approach deploying genotyping platforms which are independent from the availability of sequence information: a genotyping-by-sequencing (GBS) method DArTSeq and the microarray-based Diversity Arrays Technology (DArT). The performance of these methods was tested in a very large and complex rye genome. The DArTseq approach delivered superior results: a several fold higher efficiency of addressing genetic markers to BAC clones and anchoring of BAC clones to genetic map and also a higher reliability. Considering the sequence independence of the platform, the DArTseq-based library screening can be proposed as an attractive method to speed up genomics research in resource poor species.

Development of species diagnostic SNP markers for quality control genotyping in four rice (Oryza L.) species

Species misclassification (misidentification) and handling errors have been frequently reported in various plant species conserved at diverse gene banks, which could restrict use of germplasm for correct purpose. The objectives of the present study were to (i) determine the extent of genotyping error (reproducibility) on DArTseq-based single-nucleotide polymorphisms (SNPs); (ii) determine the proportion of misclassified accessions across 3134 samples representing three African rice species complex (Oryza glaberrima, O. barthii, and O. longistaminata) and an Asian rice (O. sativa), which are conserved at the AfricaRice gene bank; and (iii) develop species- and sub-species (ecotype)-specific diagnostic SNP markers for rapid and low-cost quality control (QC) analysis. Genotyping error estimated from 15 accessions, each replicated from 2 to 16 times, varied from 0.2 to 3.1%, with an overall average of 0.8%. Using a total of 3134 accessions genotyped with 31,739 SNPs, the proportion of misclassified samples was 3.1% (97 of the 3134 accessions). Excluding the 97 misclassified accessions, we identified a total of 332 diagnostic SNPs that clearly discriminated the three indigenous African species complex from Asian rice (156 SNPs), O. longistaminata accessions from both O. barthii and O. glaberrima (131 SNPs), and O. sativa spp. indica from O. sativa spp. japonica (45 SNPs). Using chromosomal position, minor allele frequency, and polymorphic information content as selection criteria, we recommended a subset of 24 to 36 of the 332 diagnostic SNPs for routine QC genotyping, which would be highly useful in determining the genetic identity of each species and correct human errors during routine gene bank operations.

Assessment of Genetic Variation and Population Structure of Diverse Rice Genotypes Adapted to Lowland and Upland Ecologies in Africa Using SNPs

Using interspecific crosses involving Oryza glaberrima Steud. as donor and O. sativa L. as recurrent parents, rice breeders at the Africa Rice Center developed several 'New Rice for Africa (NERICA)' improved varieties. A smaller number of interspecific and intraspecific varieties have also been released as 'Advanced Rice for Africa (ARICA)'. The objective of the present study was to investigate the genetic variation, relatedness, and population structure of 330 widely used rice genotypes in Africa using DArTseq-based single nucleotide polymorphisms (SNPs). A sample of 11 ARICAs, 85 NERICAs, 62 O. sativa spp. japonica, and 172 O. sativa spp. indica genotypes were genotyped with 27,560 SNPs using diversity array technology (DArT)-based sequencing (DArTseq) platform. Nearly 66% of the SNPs were polymorphic, of which 15,020 SNPs were mapped to the 12 rice chromosomes. Genetic distance between pairs of genotypes that belong to indica, japonica, ARICA, and NERICA varied from 0.016 to 0.623, from 0.020 to 0.692, from 0.075 to 0.763, and from 0.014 to 0.644, respectively. The proportion of pairs of genotypes with genetic distance > 0.400 was the largest within NERICAs (35.1% of the pairs) followed by ARICAs (18.2%), japonica (17.4%), and indica (5.6%). We found one pair of japonica, 11 pairs of indica, and 35 pairs of NERICA genotypes differing by <2% of the total scored alleles, which was due to 26 pairs of genotypes with identical pedigrees. Cluster analysis, principal component analysis, and the model-based population structure analysis all revealed two distinct groups corresponding to the lowland (primarily indica and lowland NERICAs) and upland (japonica and upland NERICAs) growing ecologies. Most of the interspecific lowland NERICAs formed a sub-group, likely caused by differences in the O. glaberrima genome as compared with the indica genotypes. Analysis of molecular variance revealed very great genetic differentiation (F_ST = 0.688) between the lowland and upland ecologies, and 31.2% of variation attributable to differences within cluster groups. About 8% (1,197 of 15,020) of the 15,020 SNPs were significantly (P < 0.05) different between the lowland and upland ecologies and formed contrasting haplotypes that could clearly discriminate lowland from upland genotypes. This is the first study using high density markers that characterized NERICA and ARICA varieties in comparison with indica and japonica varieties widely used in Africa, which could aid rice breeders on parent selection for developing new improved rice germplasm.

Verification of Arabidopsis stock collections using SNPmatch, a tool for genotyping high-plexed samples

Large-scale studies such as the Arabidopsis thaliana ‘1,001 Genomes’ Project require routine genotyping of stocks to avoid sample contamination. To genotype samples efficiently and economically, sequencing must be inexpensive and data processing simple. Here we present SNPmatch, a tool that identifies strains (or inbred lines, or accessions) by matching them to a SNP database. We tested the tool by performing low-coverage resequencing of over 2,000 strains from our lab seed stock collection. SNPmatch correctly genotyped samples from 1-fold coverage sequencing data, and could also identify the parents of F1 or F2 individuals. SNPmatch can be run either on the command line or through AraGeno (https://arageno.gmi.oeaw.ac.at), a web interface that permits sample genotyping from a user-uploaded VCF or BED file.

Emerging Avenues for Utilization of Exotic Germplasm

Breeders have been successful in increasing crop performance by exploiting genetic diversity over time. However, the reported annual yield increases are not sufficient in view of rapid human population growth and global environmental changes. Exotic germplasm possesses high levels of genetic diversity for valuable traits. However, only a small fraction of naturally occurring genetic diversity is utilized. Moreover, the yield gap between elite and exotic germplasm widens, which increases the effort needed to use exotic germplasm and to identify beneficial alleles and for their introgression. The advent of high-throughput genotyping and phenotyping technologies together with emerging biotechnologies provide new opportunities to explore exotic genetic variation. This review will summarize potential challenges for utilization of exotic germplasm and provide solutions.

Genetic Variation and Population Structure of Oryza glaberrima and Development of a Mini-Core Collection Using DArTseq

The sequence variation present in accessions conserved in genebanks can best be used in plant improvement when it is properly characterized and published. Using low cost and high density single nucleotide polymorphism (SNP) assays, the genetic diversity, population structure, and relatedness between pairs of accessions can be quickly assessed. This information is relevant for different purposes, including creating core and mini-core sets that represent the maximum possible genetic variation contained in the whole collection. Here, we studied the genetic variation and population structure of 2,179 Oryza glaberrima Steud. accessions conserved at the AfricaRice genebank using 27,560 DArTseq-based SNPs. Only 14% (3,834 of 27,560) of the SNPs were polymorphic across the 2,179 accessions, which is much lower than diversity reported in other Oryza species. Genetic distance between pairs of accessions varied from 0.005 to 0.306, with 1.5% of the pairs nearly identical, 8.0% of the pairs similar, 78.1% of the pairs moderately distant, and 12.4% of the pairs very distant. The number of redundant accessions that contribute little or no new genetic variation to the O. glaberrima collection was very low. Using the maximum length sub-tree method, we propose a subset of 1,330 and 350 accessions to represent a core and mini-core collection, respectively. The core and mini-core sets accounted for ~61 and 16%, respectively, of the whole collection, and captured 97-99% of the SNP polymorphism and nearly all allele and genotype frequencies observed in the whole O. glaberrima collection available at the AfricaRice genebank. Cluster, principal component and model-based population structure analyses all divided the 2,179 accessions into five groups, based roughly on country of origin but less so on ecology. The first, third and fourth groups consisted of accessions primarily from Liberia, Nigeria, and Mali, respectively; the second group consisted primarily of accessions from Togo and Nigeria; and the fifth and smallest group was a mixture of accessions from multiple countries. Analysis of molecular variance showed between 10.8 and 28.9% of the variation among groups with the remaining 71.1-89.2% attributable to differences within groups.

Sex-linked markers in the North American green frog (Rana clamitans) developed using DArTseq provide early insight into sex chromosome evolution

BACKGROUND

The extent to which sex reversal is associated with transitions in sex determining systems (XX-XY, ZZ-ZW, etc.) or abnormal sexual differentiation is predominantly unexplored in amphibians. This is in large part because most amphibian taxa have homomorphic sex chromosomes, which has traditionally made it challenging to identify discordance between phenotypic and genetic sex in amphibians, despite all amphibians having a genetic component to sex determination. Recent advances in molecular techniques such as genome complexity reduction and high throughput sequencing present a valuable avenue for furthering our understanding of sex determination in amphibians and other taxa with homomorphic sex chromosomes like many fish and reptiles.

RESULTS

We use DArTseq as a novel approach to identify sex-linked markers in the North American green frog (Rana clamitans melanota) using lab-reared tadpoles as well as wild-caught adults from seven ponds either in undeveloped, forested habitats or suburban ponds known to be subject to contamination by anthropogenic chemicals. The DArTseq methodology identified 13 sex-linked SNP loci and eight presence-absence loci associated with males, indicating an XX-XY system. Both alleles from a single locus show partial high sequence homology to Dmrt1, a gene linked to sex determination and differentiation throughout Metazoa. Two other loci have sequence similarities to regions of the chimpanzee and human X-chromosome as well as the chicken Z-chromosome. Several loci also show geographic variation in sex-linkage, possibly indicating sex chromosome recombination. While all loci are statistically sex-linked, they show varying degrees of female heterozygosity and male homozygosity, providing further evidence that some markers are on regions of the sex chromosomes undergoing higher rates of recombination and therefore further apart from the putative sex determining locus.

CONCLUSION

The ease of the DArTseq platform provides a useful avenue for future research on sex reversal and sex chromosome evolution in vertebrates, particularly for non-model species with homomorphic or cryptic or nascent sex chromosomes.