A Study of BMP-2-Loaded Bipotential Electrolytic Complex around a Biphasic Calcium Phosphate-Derived (BCP) Scaffold for Repair of Large Segmental Bone Defect

Thymosin beta 10 loaded ZIF-8/sericin hydrogel promoting angiogenesis and osteogenesis for bone regeneration

Angiogenesis is pivotal for osteogenesis during bone regeneration. A hydrogel that promotes both angiogenesis and osteogenesis is essential in bone tissue engineering. However, creating scaffolds with the ideal balance of biodegradability, osteogenic, and angiogenic properties poses a challenge. Thymosin beta 10 (TMSB10), known for its dual role in angiogenesis and osteogenesis differentiation, faces limitations due to protein activity preservation. To tackle this issue, ZIF-8 was engineered as a carrier for TMSB10 (TMSB10@ZIF-8), and subsequently integrated into the self-assembled sericin hydrogel. The efficacy of the composite hydrogel in bone repair was assessed using a rat cranial defect model. Characterization of the nanocomposites confirmed the successful synthesis of TMSB10@ZIF-8, with a TMSB10 encapsulation efficiency of 88.21 %. The sustained release of TMSB10 from TMSB10@ZIF-8 has significantly enhanced tube formation in human umbilical vein endothelial cells (HUVECs) in vitro and promoted angiogenesis in the chicken chorioallantoic membrane (CAM) model in vivo. It has markedly improved the osteogenic differentiation ability of MC 3 T3-E1 cells in vitro. 8 weeks post-implantation, the TMSB10@ZIF-8/ Sericin hydrogel group exhibited significant bone healing (86.77 ± 8.91 %), outperforming controls. Thus, the TMSB10@ZIF-8/Sericin hydrogel, leveraging ZIF-8 for TMSB10 delivery, emerges as a promising bone regeneration scaffold with substantial clinical application potential.

Programmed BMP-2 release from biphasic calcium phosphates for optimal bone regeneration

This study aimed to fabricate a multi-layered biphasic calcium phosphate (BCP) platform for programmed bone morphogenetic protein-2 (BMP-2) release, which means to block the initial burst release and promote releasing during the differentiation phase of osteogenic cells. And it is to confirm in vivo whether this platform has osteogenic inductivity even when extremely low doses of BMP-2 are loaded compared to the conventional soaking method. Our strategy consisted of preparing a multilayer coating on BCP to minimize the contact between BMP-2 and BCP and allow the loading of BMP-2. The multilayer, which is surface-modified on BCP, is composed of an organosilicate and a natural polymer-based layer-by-layer (LbL) film. We applied (3-Aminopropyl)triethoxysilane (APTES) as an organosilicate was used for amine-functionalized BCP and (collagen/heparin)₅ film was used to delay and sustain BMP-2 release. The coated multilayer not only reduced the initial burst release by more than 50% but also loaded more BMP-2. For in vivo experiment, histomorphometric analysis, it was observed that the BCP platform loaded with extremely low concentration BMP-2 (0.01 mg/ml) induced a significantly larger amount of new bones at 8 weeks compared to the conventional soaking method in the rabbit calvarium onlay graft model.

Indirect selective laser sintering-printed microporous biphasic calcium phosphate scaffold promotes endogenous bone regeneration via activation of ERK1/2 signaling

The fabrication technique determines the physicochemical and biological properties of scaffolds, including the porosity, mechanical strength, osteoconductivity, and bone regenerative potential. Biphasic calcium phosphate (BCP)-based scaffolds are superior in bone tissue engineering due to their suitable physicochemical and biological properties. We developed an indirect selective laser sintering (SLS) printing strategy to fabricate 3D microporous BCP scaffolds for bone tissue engineering purposes. The green part of the BCP scaffold was fabricated by SLS at a relevant low temperature in the presence of epoxy resin (EP), and the remaining EP was decomposed and eliminated by a subsequent sintering process to obtain the microporous BCP scaffolds. Physicochemical properties, cell adhesion, biocompatibility, in vitro osteogenic potential, and rabbit critical-size cranial bone defect healing potential of the scaffolds were extensively evaluated. This indirect SLS printing eliminated the drawbacks of conventional direct SLS printing at high working temperatures, i.e. wavy deformation of the scaffold, hydroxyapatite decomposition, and conversion of β-tricalcium phosphate (TCP) to α-TCP. Among the scaffolds printed with various binder ratios (by weight) of BCP and EP, the scaffold with 50/50 binder ratio (S4) showed the highest mechanical strength and porosity with the smallest pore size. Scaffold S4 showed the highest effect on osteogenic differentiation of precursor cells in vitro, and this effect was ERK1/2 signaling-dependent. Scaffold S4 robustly promoted precursor cell homing, endogenous bone regeneration, and vascularization in rabbit critical-size cranial defects. In conclusion, BCP scaffolds fabricated by indirect SLS printing maintain the physicochemical properties of BCP and possess the capacity to recruit host precursor cells to the defect site and promote endogenous bone regeneration possibly via the activation of ERK1/2 signaling.

Importance of crosslinking strategies in designing smart biomaterials for bone tissue engineering: A systematic review

Biomaterials are of significant importance in biomedical applications as these biological macromolecules have moderately replaced classical tissue grafting techniques owing to its beneficial properties. Despite of its favourable advantages, poor mechanical and degradative properties of biomaterials are of great concern. To this regard, crosslinkers have emerged as a smart and promising tool to augment the biological functionality of biopolymers. Different crosslinkers have been extensively used in past decades to develop bone substitutes, but the implications of toxic response and adverse reactions are truly precarious after implantation. Traditional crosslinker like glutaraldehyde has been widely used in numerous bio-implants but the potential toxicity is largely being debated with many disproving views. As alternative, green chemicals, enzymatic and non-enzymatic chemicals, bi-functional epoxies, zero-length crosslinkers and physical crosslinkers have been introduced to achieve the desired properties of a bone substitute. In this review, systematic literature search was performed on PubMed database to identify the most commonly used crosslinkers for developing promising bone like materials. The relevant articles were identified, analysed and reviewed in this paper giving due importance to different crosslinking methodologies and comparing their effectiveness and efficacy in regard to material composition, scaffold production, crosslinker dosage, toxicity and immunogenicity. This review summarizes the recent developments in crosslinking mechanism with an emphasis placed on their ability to link proteins through bonding reactions. Finally, this study also covers the convergent and divergent methodologies of crosslinking strategies also giving special importance in retrieving the current limitations and future opportunities of crosslinking modalities in bone tissue engineering.

Bone regeneration strategy by different sized multichanneled biphasic calcium phosphate granules: In vivo evaluation in rabbit model

A variety of synthetic materials are currently in use as bone substitutes, among them a new calcium phosphate-based multichannel, cylindrical, granular bone substitute that is showing satisfactory biocompatibility and osteoconductivity in clinical applications. These cylindrical granules differ in their mechanical and morphological characteristics such as size, diameter, surface area, pore size, and porosity. The aim of this study is to investigate whether the sizes of these synthetic granules and the resultant inter-granular spaces formed by their filling critical-sized bone defects affect new bone formation characteristics and to determine the best formulations from these individual types by combining the granules in different proportions to optimize the bone tissue regeneration. We evaluated two types of multichanneled cylindrical granules, 1 mm and 3 mm in diameter, combined the granules in two different proportions (wt%), and compared their different mechanical, morphological, and in vitro and in vivo biocompatibility characteristics. We assessed in vitro biocompatibility and cytotoxicity using MC3T3-E1 osteoblast-like cells using MTT (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay and confocal imaging. In vivo investigation in a rabbit model indicated that all four samples formed significantly better bone than the control after four weeks and eight weeks of implantation. Micro-computed tomography analysis showed more bone formation by the 1 mm cylindrical granules with 160 ± 10 µm channeled pore and 50% porosity than the other three samples ( p<.05), which we confirmed by histological analysis.

Bone biomaterials and interactions with stem cells

Bone biomaterials play a vital role in bone repair by providing the necessary substrate for cell adhesion, proliferation, and differentiation and by modulating cell activity and function. In past decades, extensive efforts have been devoted to developing bone biomaterials with a focus on the following issues: (1) developing ideal biomaterials with a combination of suitable biological and mechanical properties; (2) constructing a cell microenvironment with pores ranging in size from nanoscale to submicro- and microscale; and (3) inducing the oriented differentiation of stem cells for artificial-to-biological transformation. Here we present a comprehensive review of the state of the art of bone biomaterials and their interactions with stem cells. Typical bone biomaterials that have been developed, including bioactive ceramics, biodegradable polymers, and biodegradable metals, are reviewed, with an emphasis on their characteristics and applications. The necessary porous structure of bone biomaterials for the cell microenvironment is discussed, along with the corresponding fabrication methods. Additionally, the promising seed stem cells for bone repair are summarized, and their interaction mechanisms with bone biomaterials are discussed in detail. Special attention has been paid to the signaling pathways involved in the focal adhesion and osteogenic differentiation of stem cells on bone biomaterials. Finally, achievements regarding bone biomaterials are summarized, and future research directions are proposed.

Repair of a critical-size segmental rabbit femur defect using bioglass-β-TCP monoblock, a vascularized periosteal flap and BMP-2

Various synthetic bone substitutes are not suitable for reconstructing critical-size bone defects. This study tested whether a bioglass-β-tricalcium phosphate (β-TCP) monoblock is effective for repairing critical-size segmental bone defects if combined with a vascularized periosteal flap and bone morphogenetic protein (BMP)-2. A femoral osteotomy with a gap size of 20 mm was created and stabilized using a plate in 40 rabbits.The defect was left untreated (group A) or repaired using a monoblock (group B), a monoblock with a vascularized periosteal flap (group C), or a monoblock with a vascularized periosteal flap and BMP-2 (group D). Bone regeneration, vascularization and monoblock degradation were analyzed after four and eight weeks using x-ray, hematoxylin-eosin, CD34 immunohistochemical and Masson's trichrome staining observation and histometric evaluation. The radiographic grading score showed a time-dependent increase from weeks 4 to 8. At 8-week postoperative, the total new regenerated bone in groups C and D was 20.0 ± 0.3 and 55.5 ± 8.0 mm² , respectively, which was significantly greater than in group B. Conversely, group D showed less residual monoblock than did group C. An increase in microvessel density was also observed in groups C and D compared with group B at 4 and 8 weeks postoperative, respectively. This study suggests that bioglass-β-TCP monoblock alone exhibits poor potential to repair a 20-mm femoral defect. However, supplementation with a vascularized periosteal flap and BMP-2 led to effective vascularization and reliable bone regeneration throughout the monoblock, with concordant material degradation in a timely manner. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2148-2156, 2018.