Anthropometric Study of Three-Dimensional Facial Morphology in Malay Adults

"Utility of Smartphone-based Three-dimensional Surface Imaging for Digital Facial Anthropometry"

Background

The utilization of three-dimensional (3D) surface imaging for facial anthropometry is a significant asset for patients undergoing maxillofacial surgery. Notably, there have been recent advancements in smartphone technology that enable 3D surface imaging.In this study, anthropometric assessments of the face were performed using a smartphone and a sophisticated 3D surface imaging system.

Methods

30 healthy volunteers (15 females and 15 males) were included in the study. An iPhone 14 Pro (Apple Inc., USA) using the application 3D Scanner App (Laan Consulting Corp., USA) and the Vectra M5 (Canfield Scientific, USA) were employed to create 3D surface models. For each participant, 19 anthropometric measurements were conducted on the 3D surface models. Subsequently, the anthropometric measurements generated by the two approaches were compared. The statistical techniques employed included the paired t-test, paired Wilcoxon signed-rank test, Bland-Altman analysis, and calculation of the intraclass correlation coefficient (ICC).

Results

All measurements showed excellent agreement between smartphone-based and Vectra M5-based measurements (ICC between 0.85 and 0.97). Statistical analysis revealed no statistically significant differences in the central tendencies for 17 of the 19 linear measurements. Despite the excellent agreement found, Bland-Altman analysis revealed that the 95% limits of agreement between the two methods exceeded ±3 mm for the majority of measurements.

Conclusion

Digital facial anthropometry using smartphones can serve as a valuable supplementary tool for surgeons, enhancing their communication with patients. However, the proposed data suggest that digital facial anthropometry using smartphones may not yet be suitable for certain diagnostic purposes that require high accuracy.

Efficacy of Cranial Orthosis for Plagiocephaly Based on 2D and 3D Evaluation

Background  With the advent of cranial orthoses as therapeutic medical devices for the treatment of severe positional head deformities in Japan, an increasing number of patients are being treated with them. However, assessing the effectiveness of a treatment is often difficult due to the use of different metrics. This study aimed to evaluate the effectiveness of cranial orthoses for deformational plagiocephaly using two- (2D) and three-dimensional (3D) evaluation metrics. Methods  We conducted a retrospective study of infant patients with deformational plagiocephaly who underwent cranial orthosis treatment. We evaluated the severity of deformational plagiocephaly using cranial asymmetry (CA) and the cranial vault asymmetry index (CVAI) as 2D metrics, and anterior and posterior symmetry ratios as 3D metrics. The patients were divided into 24 subgroups based on the initial severity of each outcome and their age at the start of treatment. We analyzed the changes in outcomes and correlations within improvements across the age and severity categories. Results  Overall, 1,038 infants were included in this study. The mean CA, CVAI, and anterior and posterior symmetry ratios improved significantly after cranial orthosis treatment. The improvement in each score was greater in patients with more severe initial deformities and in those who underwent treatment at a younger age. Conclusion  Cranial orthosis treatment was effective in correcting deformational plagiocephaly in infants, as demonstrated by improvements in both 2D and 3D metrics. Patients with more severe initial deformities and those who underwent treatment at a younger age showed greater improvement.

A Cross-Sectional Study to Determine and Compare the Craniofacial Anthropometric Norms in a Selected Kenyan and Chinese Population

Background: Craniofacial anthropometry provides essential data for diagnosis and treatment planning, with the norms for many races having been investigated. The results reveal that facial morphometry varies greatly because of geographical, ethnic, and racial variations. This study aims to gather the normative anthropometric data and compare the differences in facial morphometry between the Kenyan population and that of the Chinese. Methods: Four vertical measurements (trichion-nasion, nasion-subnasale, subnasale-gnathion, and superaurale-subaurale) and 6 horizontal measurements (zygion-zygion, exocanthion-endocanthion, endocanthion-endocanthion, pupil-pupil, alare-alare, and chelion-chelion) were obtained manually from subjects with no craniofacial abnormality. Results: A total of 180 participants (90 Kenyans and 90 Chinese) were included. Among the Kenyans, males generally had greater dimensions in comparison to the Kenyan females with the exception of the upper third, lower third, and intercanthal, and interpupillary distances. Among the Chinese, there was a significant difference between the 2 genders with the exception of intercanthal distance. All measurements were greater in Chinese males in comparison to the females. Comparison between races shows that Kenyans had greater vertical measurements with exception of the ear length for both genders. The Chinese males had increased facial width and intercanthal distance, while the Chinese females showed increased intercanthal distance compared to Kenyans. Kenyans exhibited hyperleptoprosopic-type face, while Chinese exhibited mesoprosopic-type face, with none of the 2 groups conforming to the neoclassical canons. Conclusion: Kenyans generally have greater craniofacial measurements versus Chinese, except for the facial width and intercanthal distance for males and interorbital distance for females.

Head and face anthropometric study for respirators in the multi-ethnic Asian population of Malaysia

Background

Existing anthropometric studies for respirator designs are based on the head and facial dimensions of Americans and Chinese nationals, with no studies for multi-ethnic countries like Malaysia. This study aimed to create head and facial morphological database for Malaysia, specifically to identify morphological differences between genders, ethnicities, and birthplaces, as well as predictors of the dimensions.

Design

A cross-sectional study.

Setting

Malaysia.

Participants

A nation-wide cross-sectional study using a complex survey design with two stage-stratified random sampling was conducted among 3,324 participants, aged 18 years and above who were also participants of the National Health and Morbidity Survey 2020.

Primary and secondary outcomes

The study collected data on sociodemographic, measurement of Body Mass Index (BMI) and 10 head and facial dimensions (3 dimensions were measured using direct measurement, and 7 others using Digimizer software for 2-dimension images). Linear regression was performed to determine the association between gender, ethnicity, birthplace, age and BMI and the dimensions.

Results

There were significant differences in all the dimensions between sex, birthplace and ethnicity (p < 0.005). Further analysis using linear regression showed sex, ethnicity, birthplace, age and BMI were significant predictors of the dimensions. In comparison to studies from the United States and China, our study population had a wider interpupillary distance and nose breadth for both male and female participants, but smaller bigonial breadth and smaller minimal frontal breadth.

Conclusion

These findings could assist in the design and sizing of respirators that will fit Malaysians and possibly other Southeast Asian population.

An overview of three-dimensional imaging devices in dentistry

OBJECTIVE

To review four types of three-dimensional imaging devices: intraoral scanners, extraoral scanners, cone-beam computed tomography (CBCT), and facial scanners, in terms of their development, technologies, advantages, disadvantages, accuracy, influencing factors, and applications in dentistry.

METHODS

PubMed (National Library of Medicine) and Google Scholar databases were searched. Additionally, the scanner manufacturers' websites were accessed to obtain relevant data. Four authors independently selected the articles, books, and websites. To exclude duplicates and scrutinize the data, they were uploaded to Mendeley Data. In total, 135 articles, two books, and 17 websites were included.

RESULTS

Research and clinical practice have shown that oral and facial scanners and CBCT can be used widely in various areas of dentistry with high accuracy.

CONCLUSION

Although further advancement of these devices is desirable, there is no doubt that digital technology represents the future of dentistry. Furthermore, the combined use of different devices may bring dentistry into a new era. These four devices will play a significant role in clinical utility with high accuracy. The combined use of these devices should be explored further.

CLINICAL SIGNIFICANCE

The four devices will play a significant role in clinical use with high accuracy. The combined use of these devices should be explored further.

Use of Facial Morphology to Determine Nutritional Status in Older Adults: Opportunities and Challenges

Undiagnosed malnutrition is a significant problem in high-income countries, which can reduce the quality of life of many individuals, particularly of older adults. Moreover, it can also inflate the costs of existing health care systems because of the many metabolic complications that it can cause. The current methods for assessing malnutrition can be cumbersome. A trained practitioner must be present to conduct an assessment, or patients must travel to facilities with specialized equipment to obtain their measurements. Therefore, digital health care is a possible way of closing this gap as it is rapidly gaining traction as a scalable means of improving efficiency in the health care system. It allows for the remote monitoring of nutritional status without requiring the physical presence of practitioners or the use of advanced medical equipment. As such, there is an increasing interest in expanding the range of digital applications to facilitate remote monitoring and management of health issues. In this study, we discuss the feasibility of a novel digital remote method for diagnosing malnutrition using facial morphometrics. Many malnutrition screening assessments include subjective assessments of the head and the face. Facial appearance is often used by clinicians as the first point of qualitative indication of health status. Hence, there may be merit in quantifying these subtle but observable changes using facial morphometrics. Modern advancements in artificial intelligence, data science, sensors, and computing technologies allow facial features to be accurately digitized, which could potentially allow these previously intuitive assessments to be quantified. This study aims to stimulate further discussion and discourse on how this emerging technology can be used to provide real-time access to nutritional status. The use of facial morphometrics extends the use of currently available technology and may provide a scalable, easily deployable solution for nutritional status to be monitored in real time. This will enable clinicians and dietitians to keep track of patients remotely and provide the necessary intervention measures as required, as well as providing health care institutions and policy makers with essential information that can be used to inform and enable targeted public health approaches within affected populations.

Facial Anthropometry and Analysis in Egyptian Women

Human facial analysis can be considered both an art and a science, and is used extensively to measure soft tissue proportions. Remarkable changes exist in anthropometric measures due to changes over centuries of geographical, genetic, and environmental factors, as well as waves of migration causing facial proportions to vary among the different ethnic groups. The purpose of this study was to establish facial soft tissue norms for the Egyptian female population between the ages of 18 and 50, as well as several age-related changes in facial measurements that are described fairly scarcely in the literature.

Reliability and Accuracy of 2D Photogrammetry: A Comparison With Direct Measurement

Objective

Facial anthropometric data is important for the design of respirators. Two-dimensional (2D) photogrammetry has replaced direct anthropometric method, but the reliability and accuracy of 2D photogrammetry has not been quantified. This study aimed to assess inter-rater reliability of 2D photogrammetry and to examine the reliability and accuracy of 2D photogrammetry with direct measurement.

Design

A cross-sectional study.

Setting

Malaysia.

Participants

A subset of 96 participants aged 18 and above.

Primary and secondary outcomes

Ten facial dimensions were measured using direct measurement and 2D photogrammetry. An assessment of inter-rater reliability was performed using intra-class correlation (ICC) of the 2D images. In addition, ICC and Bland-Altman analyses were used to assess the reliability and agreement of 2D photogrammetry with direct measurement.

Results

Except for head breadth and bigonial breadth, which were also found to have low inter-rater reliability, there was no significant difference in the inter-rater mean value of the 2D photogrammetry. The mean measurements derived from direct measurement and 2D photogrammetry were mostly similar. However, statistical differences were noted for two facial dimensions, i.e., bizygomatic breadth and bigonial breadth, and clinically the magnitude of difference was also significant. There were no statistical differences in respect to the remaining eight facial dimensions, where the smallest mean difference was 0.3 mm and biggest mean difference was 1.0 mm. The ICC showed head breadth had poor reliability, whilst Bland-Altman analyses showed seven out of 10 facial dimensions using 2D photogrammetry were accurate, as compared to direct measurement.

Conclusion

Only certain facial measurements can be reliably and accurately measured using 2D photogrammetry, thus it is important to conduct a reliability and validation study before the use of any measurement methods in anthropometric studies. The results of this study also suggest that 2D photogrammetry can be used to supplement direct measurement for certain facial dimensions.

Expanding the Classic Facial Canons: Quantifying Intercanthal Distance in a Diverse Patient Population

Background:

The intercanthal distance (ICD) is central to our perception of facial proportions, and it varies according to gender and ethnicity. Current standardized reference values do not reflect the diversity among patients. Therefore, the authors sought to provide an evidence-based and gender/ethnicity-specific reference when evaluating patients’ ICD.

Methods:

As per the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines, a systematic search of PubMed, Medline, and Embase was carried out for studies reporting on the ICD. Demographics, study characteristics, and ICDs were extracted from included studies. ICD values were then pooled for each ethnicity and stratified by gender. The difference between men and women, and that across ethnicities and measurement types were compared by means of independent sample t-test and one-way ANOVA (SPSS v.24).

Results:

A total of 67 studies accounting for 22,638 patients and 118 ethnic cohorts were included in this pooled analysis. The most reported ethnicities were Middle Eastern (n = 6629) and Asian (n = 5473). ICD values (mm) in decreasing order were: African 38.5 ± 3.2, Asian 36.4 ± 1.6, Southeast Asian 32.8 ± 2.0, Hispanic 32.3 ± 2.0, White 31.4 ± 2.5, and Middle Eastern 31.2 ± 1.5. A statistically significant difference (P < 0.05) existed between all ethnic cohorts, between genders among most cohorts, and between most values stratified by measurement type.

Conclusions:

Our standards of craniofacial anthropometry must evolve from the neoclassical canons using White values as references. The values provided in this review can aid surgeons in appreciating the gender- and ethnic-specific differences in the ICD of their patients.

Updating Standards of Facial Growth in Romanian Children and Adolescents Using the Anthropometric Method-A Pilot Study

The anthropometric method is an important tri-dimensional and non-invasive assessment instrument for accurate diagnosis in paedodontics, orthodontics, and other medical fields. Our aim was to propose a technique that is accessible for clinicians and to determine the reference values for Romanian children and adolescents for the facial parameters selected. We proposed three basic instruments: a plastic compass, a ruler, and a digital caliper. Eighty-five children and adolescents (62% girls and 38% boys), aged between 3.5 and 14.5 years, were included in the study. We selected eight transversal, 12 vertical, and three sagittal measurements. Facial indices, according to Farkas L.G., were directly determined. The correlations between facial and general growth parameters, using Pearson correlation coefficient, for the entire sample were significant, direct, and strong for the following: Zy-Zy, Go-Go, N-Gn, N-Sn, Sto-Gn, Tr-Gn, Tr-Sn, Tr-Tr (r = 0.526–0.925, p < 0.001), and insignificant for Sn-Sto (r = 0.099–0.124, p > 0.354). The highest correlation coefficient is exhibited by Tr-Gn (r = 0.893 with height and r = 0.925 with weight). When performing a gender related comparison, we noticed that the vertical and transversal linear parameters and some facial indices are increased in boys (p < 0.05), depending on the age group. The simplified anthropometric technique represents an accessible method to every clinician, bringing important information related to dentofacial growth, diagnosis, and treatment planning in dentistry.

Measurement of three-dimensional changes in lip vermilion in adult female patients after orthodontic extraction: a retrospective longitudinal study

Background

3D facial scanning has changed the way facial aesthetic is evaluated and has numerous advantages for facial analysis. The specific relationship between lip vermilion morphological changes after orthodontic extraction treatment has not been fully explained. The objective of this study was to evaluate 3D morphological changes after orthodontic extraction treatment in lip vermilion of adult females with dentoalveolar protrusion using a structured light-based scanner.

Methods

Forty-two female subjects (25.2 ± 1.9 years) were recruited as the treatment group; these patients had undergone extraction treatment and achieved better sagittal profiles. Twenty female subjects (25.5 ± 2.1 years) were enrolled in the non-treatment group; these patients did not require any orthodontic treatment. The follow up time for the treatment group was more than 24 months and for the non-treatment group was more than 12 months. 3D facial scans were captured using 3D CaMega. Six landmarks (Ls, Li, R.Chp, L.Chp, R.Ch, and L.Ch), three linear measurements (mouth height, philtrum width, and mouth width), and three area measurements (upper, lower, and total vermilion area) were measured. The spatial deviations of three volumetric measurements (upper, lower, and total vermilion) were constructed for quantitative analysis. Color-coded displacement map were constructed for visualization of the soft-tissue displacement as qualitative evaluation.

Results

Mouth height and philtrum width decreased (-0.93 mm and − 1.08 mm, respectively) significantly (p = 0.008 and p = 0.027, respectively), and no significant (p = 0.488) change in mouth width was observed in the treatment group. The lower and total vermilion surface areas decreased (-51.00mm² and − 69.82mm², respectively) significantly (p = 0.003 and p = 0.031, respectively) in the treatment group, but no statistically significant (p = 0.752) change was detected in the upper vermilion. In the treatment group, significant retractions were observed in the color-coded displacement map, and three volumetric measurements of vermilion changed significantly (p = 0.012, p = 0.001 and p = 0.004, respectively). Significant differences were found between the treatment group and the non-treatment group in the linear, area and volumetric measurements.

Conclusions

This study established a method for qualitative and quantitative evaluation of the lip vermilion. Significant 3D retraction of the lip vermilion after the extraction treatment was found, with morphological variation between upper and lower vermilion.

Three-Dimensional Photogrammetric Study on Age-Related Facial Characteristics in Korean Females

Background

Understanding the age-related morphological changes of facial soft tissue is fundamental in achieving improved outcomes of rejuvenating procedures. Three-dimensional (3D) photogrammetry is a reliable and convenient anthropometric tool to assess facial soft tissue.

Objective

The aim of this study was to establish age-related facial soft tissue morphology in Korean adult females using non-invasive 3D photogrammetry.

Methods

One hundred and ninety-two female participants were divided into three groups based on age: the younger group (aged 20~39 years), middle group (40~59 years), and older group (60~79 years). Thirty-six landmarks were identified via 3D photogrammetric scanning (Morpheus 3D, Morpheus Co., Ltd., Seongnam, Korea). Forty-one facial dimensions were analyzed using the imaging software to find significance between the age groups.

Results

Smaller upper-facial volume (p=0.019) and shorter upper-facial height (p=0.034) were observed in the older group than in the younger group. In the mid-face, narrowed palpebral fissure (p<0.001) with elongated upper eyelid height (p<0.001) and widened nose (p<0.001) were observed in the older group compared with the younger group. Longer lower-facial height (p<0.001) with longer and wider philtrum (p<0.001, p=0.004, respectively), shorter lower vermilion height (p<0.001), wider mouth width (p<0.001), and smaller lower vermilion angle (p<0.001) were seen in the older group when compared with the younger group. Moreover, greater angles of nasofrontal, nasomental, and labiomental angle (p=0.015, p=0.015, p=0.080, respectively), and smaller nasofacial angle (p=0.034) were observed in the older group than in the younger group.

Conclusion

Our results provide clues of aging-related facial morphological characteristics in Korean female population.

CT-Based Measurements of Facial Parameters of Healthy Children and Adolescents in Thailand

BACKGROUND AND PURPOSE

Facial parameters are used for evaluating normal growth patterns, diagnosing patients with craniofacial abnormalities, and planning surgical procedures. However, these parameters vary by ethnicity and race. This study aims to describe soft-tissue and bony facial parameters based on CT of healthy pediatric and adolescent patients in Thailand.

MATERIALS AND METHODS

CT imaging of the brain, orbit, facial bones, and neck was performed at Maharaj Nakorn Chiangmai Hospital, in patients from birth to 19 years old. Patients with known syndromic disease, craniofacial syndrome, facial trauma and/or infection, and previous surgery that deformed the study area were excluded. The key points of measurement were soft-tissue intercanthal, bony interorbital, and bony lateral orbital distances.

RESULTS

There were 932 patients: 554 males (59.4%) and 378 females (40.6%). Facial parameters rapidly increased in the first 2 years of life. Significant differences in these parameters between the males and females were found at the age of ≥15 years. However, ratios of the interorbital to the lateral orbital distance were generally consistent among age groups in both sexes, at 0.25.

CONCLUSIONS

This study, in Thailand, provides detailed age- and sex-specific normative data of the craniofacial measurements in children and adolescences based on CT imaging. These data can be used for evaluating individual patients with craniofacial abnormalities as well as determining the treatment in Thai and Asian populations, in whom craniofacial abnormalities, for example, frontoethmoidal encephalomeningocele, are common.

Reliability and Agreement of 3D Anthropometric Measurements in Facial Palsy Patients Using a Low-Cost 4D Imaging System

The reliability (precision) and agreement (accuracy) of anthropometric measurements based on manually placed 3D landmarks using the RealSense D415 were investigated in this paper. Thirty facial palsy patients, with their face in neutral (resting) position, were recorded simultaneously with the RealSense and a professional 3dMD imaging system. First the RealSense depth accuracy was determined. Subsequently, two observers placed 14 facial landmarks on the 3dMD and RealSense image, assessing the distance between landmark placement. The respective intra- and inter-rater Euclidean distance between the landmark placements was 0.84 mm (±0.58) and 1.00 mm (±0.70) for the 3dMD landmarks and 1.32 mm (±1.27) and 1.62 mm (±1.42) for the RealSense landmarks. From these landmarks 14 anthropometric measurements were derived. The intra- and inter-rater measurements had an overall reliability of 0.95 (0.87 - 0.98) and 0.93 (0.85 - 0.97) for the 3dMD measurements, and 0.83 (0.70 - 0.91) and 0.80 (0.64 - 0.89) for the RealSense measurements, respectively, expressed as the intra-class correlation coefficient. Determined by the Bland-Altman analysis, the agreement between the RealSense measurements and 3dMD measurements was on average -0.90 mm (-4.04 - 2.24) and -0.89 mm (-4.65 - 2.86) for intra- and inter-rater agreement, respectively. Based on the reported reliability and agreement of the RealSense measurements, the RealSense D415 can be considered as a viable option to perform objective 3D anthropomorphic measurements on the face in a neutral position, where a low-cost and portable camera is required.

Depiction of ethnic facial aging by forensic artists and preliminary assessment of the applicability of facial averages

Many characteristics of facial aging are common to all. The age of their onset and which characteristics tend to predominate varies among individuals depending on many factors including their genetic makeup, life experiences, environment in which they live, and the regional, ethnic, or socially perceived group to which they belong. Forensic artists are often asked to provide sketches, 2D or 3D digital renderings, or sculptures representative of how an individual may appear at an older age based on a provided photograph, victim or witness description, and/or cranial remains. The challenge escalates when the subject is a member of a regional, ethnic, or other socially perceived group to which the artist has had little or no exposure. We describe aspects of adult facial aging that are of particular relevance to the forensic artist, applicable software tools, and pertinent facial databases, especially those emphasizing non-white populations. We demonstrate that facial averaging offers two key advantages to the artistic portrayal of facial aging: first, the technique requires relatively small reference databases from groups that may present logistical challenges to collect and second, that a facial average provides a useful representation of the gestalt of the age and ethnicity cohort to which a subject belongs. The artist may use an average along with other available information such as photo reference books, eyewitness descriptions, photos of immediate family members, and cranial structure to guide production of a facial composite drawing, digital age progression, or sculpture of the subject in question.

Novel facial characteristics in congenital rubella syndrome: a study of 115 cases in a cardiac hospital of Bangladesh

OBJECTIVE

To establish novel facial characteristics unique to congenital rubella syndrome (CRS) as prediagnostic criteria to supplement disease diagnosis in patients with or without a history of maternal rubella infection.

DESIGN

An analysis of 115 CRS case series (2018-2020) based on the presence of any of the triad features.

SETTING

Outpatient department of a tertiary care referral cardiac hospital in Dhaka, Bangladesh.

PARTICIPANTS

In total, 115 participants (53.1% men) were enrolled. Participants underwent echocardiography if they presented with suspected cardiac symptoms along with deafness, cataract or microcephaly.

MAIN OUTCOME MEASURES

Age, sex and socioeconomic status of the participants; history of maternal vaccination and infection; facial characteristics unique to CRS (triangular face, prominent nose, wide forehead and a whorl on either side of the anterior hairline) named 'rubella facies' and frequency of systemic involvements in CRS.

RESULTS

The median patient age was 2 years. The income of 50.4% of the participating families was <US$1500. Further, 32 mothers (27.8%) were infected with rubella during the first trimester of pregnancy, 15 (13.0%) during the second trimester and 3 (2.6%) during the third trimester. The remainder (65.2%) recalled no history of infection during pregnancy. Rubella facies presented as a triangular-shaped face in 95 (82.6%) cases, a broad forehead in 88 (76.5%) and a prominent nose in 75 (65.2%). A rubella whorl was present on the right or left side of the anterior hairline in 80% and 18.2% of cases, respectively. IgG and IgM antibodies were present in 91.3% and 8.6% of children, respectively. Cataract, deafness, microcephaly, and congenital heart disease were detected in 53.0%, 75.6%, 68.6% and 98.2% of cases, respectively.

CONCLUSIONS

Rubella facies, a set of unique facial characteristics, can support early CRS diagnosis and treatment and may supplement the existing CRS triad.

Facial Anthropometric Proportion of Chinese Han Nationality

Facial anthropometric measurements play an important part not only in forensic cases but also in clinical treatments. The utilization of 2D photograph methods in facial anthropometric studies to found database with age, gender, ethnicity, and region was expanded by other races but little for Han nationality. This study was undertaken to describe reference ranges of facial anthropometric proportions of Han nationality and compare the anthropometric characteristics with other ethnicities. Our subjects focused on full-face photos of Han nationality in South China which consisted of 1176 healthy person (425 adult males, 421 adult females and 157 underage boys and 173 underage girls). Eight anthropometric landmarks on photos were examined by ImageJ software, and 7 anthropometric ratios were analyzed. The results indicated sex- and age- and ethnics-related anthropometric variations in Chinese Han nationality in South China. For adults, females have larger ratios in intercanthal-nasal width and lip height index and smaller nose width index; for impubes, boys were larger in lip height index and smaller in lip width ratios than girls, but as age achieved, the underage boys and girls exhibited a significantly larger nose width index and lip width index, smaller canthal index, intercanthal-nasal width and lip height index. Comparing with Japanese, India, North American and Persian, Chinese Han showed great difference in facial anthropometric proportions.

Three-dimensional photographic analysis of the face in European adults from southern Spain with normal occlusion: reference anthropometric measurements

Background

Recent non-invasive 3D photography method has been applied to facial analysis, offering numerous advantages in orthodontic. The purpose of this study was to analyze the faces of a sample of healthy European adults from southern Spain with normal occlusion in order to establish reference facial soft tissue anthropometric parameters in this specific geographic-ethnic population, as well as to analyze sexual dimorphism.

Methods

A sample of 100 healthy adult volunteers consisting of 50 women (mean age, 22.92 ± 1.56 years) and 50 men (mean age, 22.37 ± 2.12 years) were enrolled in this study. All participants had normal occlusion, skeletal Class I, mesofacial pattern, and healthy body mass index. Three-dimensional photographs of the faces were captured non-invasively using Planmeca ProMax 3D ProFace^®. Thirty landmarks related to the face, eyes, nose, and orolabial and chin areas were identified.

Results

Male displayed higher values in all vertical and transversal dimensions, with the exception of the lower lip height. Larger differences between sexes were observed in face, mandible, and nose. Male also had higher values in the angular measurements which referred to the nose. No sex differences were found in transverse upper lip prominence or transverse mandibular prominence. No differences were found in the ratio measurements, with the exception of intercantal width/nasal width, which was higher in women than in men.

Conclusions

Reference anthropometric measurements of facial soft tissues have been established in European adults from southern Spain with normal occlusion. Significant sexual dimorphism was found, with remarkable differences in size between sexes

Electronic supplementary material

The online version of this article (10.1186/s12903-019-0898-y) contains supplementary material, which is available to authorized users.

Normative anthropometry and proportions of the Kenyan-African face and comparative anthropometry in relation to African Americans and North American Whites

Background

There is no normative craniofacial anthropometric data for the Kenyan-African population. The purpose of this investigation was to determine normative anthropometric craniofacial measurements and proportional relationships for Kenyans of African descent and to compare the data with African Americans (AA), North American Whites (NAW), and neoclassical canons.

Methods

Twenty-five direct facial anthropometric measurements, and 4 angular measurements, were taken on 72 Kenyan-African participants (age range 18–30 years) recruited at the University of Nairobi in Kenya. The data were compared with AA and NAW populations, and neoclassical canons. Descriptive statistics of the variables were computed for the study population.

Results

Significant differences between both Kenyan males and females were detected in forehead height (~ 5 mm greater for males, ~ 4.5 mm for females), nasal height (reduced by ~ 4 mm in males, ~ 3 mm in females), nasal width (8–9 mm greater), upper lip height (> 3 mm), and eye width (greater by ~ 3 mm) compared to NAW subjects. All vertical measurements obtained were significantly different compared with NAW. Differences were observed in comparison with AA subjects, but less marked. Mouth width was similar in all groups. Angular measurements were variable. Neoclassical canons did not apply to the Kenyan population.

Conclusions

Anthropometric measurements of NAW showed clear differences when compared with the Kenyan population, and variations exist with comparative AA data. The anthropometric data in terms of linear measurements, angular measurements, and proportional values described may serve as a database for facial analysis in the Kenyan-African population.

Age-Related Changes in the External Noses of the Anatolian Men

OBJECTIVE

Knowledge of age-related nasal region measurements in Anatolian men; growth changes between adult and old age.

BACKGROUND

The nose plays a critical role in determining the external appearance of an individual. Craniofacial anthropometry has been commonly used in forensic anthropology and medicine.

METHODS

A total of 300 men (100 between 20-40 years; 100 between 40-60 years and 100 60-up years) were measured using a photographic technic from the Image J program. From the landmarks, 13 linear distances and 3 angles were calculated and averaged for age groups.

RESULTS

The means of nasal bridge lengths of three age groups were 60.30, 63.43 and 64.63 mm, respectively. The average nasal tip protrusions of three groups were 24.31, 26.69 and 27.53 mm, respectively. Nasolabial angle, nasal bridge length and tip protrusion, anatomic and morphologic nose width and root width were statistically different between the three age groups (p < 0.05).

CONCLUSION

Results collected in this study could serve as a data bank for nasal anthropometry during aging and development. The assessment of teratogenic-induced traumas, craniofacial alteration, facial reconstruction, aging of dead person and personal identification may be assisted by age data from Anatolian men from age data banks.

LEVEL OF EVIDENCE III

This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Male and Female Characteristics of Facial Soft Tissue Thickness in Different Orthodontic Malocclusions Evaluated by Cephalometric Radiography

Background

The facial profile is determined by the facial soft tissue thickness (FSTT) and dentoskeletal characteristics. The aim of this study was to compare male and female characteristics of FSTT in different orthodontic malocclusions using cephalometric radiography.

Material/Methods

One hundred and twenty lateral cephalometric radiography-derived cephalograms of adult male (n=47) and female (n=73) orthodontic patients, aged between 16–22 years were classified according to their dentoskeletal relationships as Class I (n=30), Class II Division 1 (n=30), Class II Division 2 (n=30), Class III (n=30). Burstone analysis of seven linear dimensions of FSTT was used.

Results

Men had a thicker FSTT in dentoskeletal relationships Class I, Class II Division 2, and Class III. Sex differences varied from significant (t=2.056; p<0.05) for the sub-nasal area in Class II Division 2, to highly significant (t=3.772; p<0.001) for the upper lip sulcus in Class II Division 2. Women in Class II Division 1 had significantly thicker FSTT in the lower jaw area (t=2.800; p<0.01) and for the lower lip sulcus and the chin area (t=3.961; p<0.001).

Conclusions

Men with orthodontic malocclusions were characterized by thicker facial soft tissue compared with female patients in Class I and Class II Division 2; female patients in Class II Division 1 were characterized by thicker facial soft tissue of the mentolabial sulcus and chin. Men and women with a skeletal jaw relationship in Class III showed no significant difference in their FSTT.