The analysis of viability for mammalian cells treated at different temperatures and its application in cell shipment

Electrochemical assay of mammalian cell viability

We present the first use of amperometric detection to assess the viability of mammalian cells in continuous mode, directly in the cell culture medium. Vero or HeLa cells were injected into electrochemical sensors equipped with a 3-electrode system and containing DCIP 50 µM used as the redox mediator. DCIP was reduced by the viable cells and the reduced form was detected amperometrically at 300 mV vs silver pseudo-reference. The continuous regeneration of the oxidized form of the mediator ensured a stable redox state of the cell environment, allowing the cells to survive during the measurement time. The electrochemical response was related to cell metabolism (no response with dead cells or lysed cells) and depended on both mediator concentration and cell density. The protocol was applied to both cells in suspension and adhered cells. It was also adapted to detect trans-plasma membrane electron transfer (tPMET) by replacing DCIP by ferricyanide 500 µM and using linear scan voltammetry (2 mV/s). The pioneering results described here pave the way to the development of routine electrochemical assays for cell viability and for designing a cell-based analytical platform.

The Future of Microsurgery: Vascularized Composite Allotransplantation and Engineering Vascularized Tissue

Background

Microsurgical techniques have revolutionized the field of reconstructive surgery and are the mainstay for complex soft tissue reconstruction. However, their limitations have promoted the development of viable alternatives. This article seeks to explore technologies that have the potential of revolutionizing microsurgical reconstruction as it is currently known, reflect on current and future vascularized composite allotransplantation (VCA) practices, as well as describe the basic science within emerging technologies and their potential translational applications.

Methods

A literature review was performed of the technologies that may represent the future of microsurgery: vascularized tissue engineering (VCA) and flap-specific tissue engineering.

Results

VCA has shown great promise and has already been employed in the clinical setting (especially in face and limb transplantation). Immunosuppression, logistics, cost, and regulatory pathways remain barriers to overcome to make it freely available. Vascularized and flap-specific tissue engineering remain a laboratory reality but have the potential to supersede VCA. The capability of creating an off-the-shelf free flap matching the required tissue, size, and shape is a significant advantage. However, these technologies are still at the early stage and require significant advancement before they can be translated into the clinical setting.

Conclusion

VCA, vascularized tissue engineering, and flap-specific bioengineering represent possible avenues for the evolution of current microsurgical techniques. The next decade will elucidate which of these three strategies will evolve into a tangible translational option and hopefully bring a paradigm shift of reconstructive surgery.

3D printing-based full-scale human brain for diverse applications

Surgery is the most frequent treatment for patients with brain tumors. The construction of full-scale human brain models, which is still challenging to realize via current manufacturing techniques, can effectively train surgeons before brain tumor surgeries. This paper aims to develop a set of three-dimensional (3D) printing approaches to fabricate customized full-scale human brain models for surgery training as well as specialized brain patches for wound healing after surgery. First, a brain patch designed to fit a wound's shape and size can be easily printed in and collected from a stimuli-responsive yield-stress support bath. Then, an inverse 3D printing strategy, called "peeling-boiled-eggs," is proposed to fabricate full-scale human brain models. In this strategy, the contour layer of a brain model is printed using a sacrificial ink to envelop the target brain core within a photocurable yield-stress support bath. After crosslinking the contour layer, the as-printed model can be harvested from the bath to photo crosslink the brain core, which can be eventually released by liquefying the contour layer. Both the brain patch and full-scale human brain model are successfully printed to mimic the scenario of wound healing after removing a brain tumor, validating the effectiveness of the proposed 3D printing approaches.

Techniques of Using Peripheral Blood Mononuclear Cells as the Cellular System to Investigate How of the Bovine Species (Indian Zebu-Jersey Crossbreds) Responds to in vitro Thermal Stress Stimulation (Thermal Assault/Heat Shock)

Animal production is negatively impacted by global warming and is subject to serious consequences for livestock production systems. In order to understand how PBMCs of Indian Zebu-Jersey crossbreds respond to various levels and durations of thermal assault and heat shock, in this chapter we will discuss techniques involving in vitro thermal stress stimulation (TSS) to stimulate bovine peripheral blood mononuclear cells (PBMCs) under various thermal assault conditions (TACs), including normal to extreme temperatures and varying durations of thermal exposure (DTEs). The consequences of thermal stress on bovine species can be lessened and managed with an understanding of how PBMCs as a cellular system respond to in vitro heat shock and thermal assault. To learn more about how Indian Zebu-Jersey crossbreds respond to in vitro thermal conditions, it may also be possible to explore the relationship between the decrease in PBMCs count during in vitro TSS and the expression of the heat shock protein genes (HSPs) such as HSPs 70 and 90 genes. This will be exploited to discover how Indian Zebu-Jersey crossbreds respond in vivo to diverse environmental thermal conditions and will further enable in vivo understanding of the potential for thermotolerance in bovine species for better adaptability, survival, and production performance.

COPA3 peptide supplementation alleviates the heat stress of chicken fibroblasts

Heat stress inhibits cellular proliferation and differentiation through the production of reactive oxygen species. Under stress conditions, antioxidant drugs promote stable cellular function by reducing the stress level. We sought to demonstrate 9-mer disulfide dimer peptide (COPA3) supplementation stabilizes fibroblast proliferation and differentiation even under heat stress conditions. In our study, fibroblasts were assigned to two different groups based on the temperature, like 38°C group presented as Control - and 43°C group presented as Heat Stress-. Each group was subdivided into two groups depending upon COPA3 treatment, like 38°C + COPA3 group symbolized Control+ and the 43°C + COPA3 group symbolized as Heat Stress+. Heat stress was observed to decrease the fibroblast viability and function and resulted in alterations in the fibroblast shape and cytoskeleton structure. In contrast, COPA3 stabilized the fibroblast viability, shape, and function. Moreover, heat stress and COPA3 were found to have opposite actions with respect to energy production, which facilitates the stabilization of cellular functions by increasing the heat tolerance capacity. The gene expression levels of antioxidant and heat shock proteins were higher after heat stress. Additionally, heat stress promotes the mitogen-activated protein kinase/ extracellular signal-regulated kinase-nuclear factor erythroid 2-related factor 2 (MAPK/ERK-Nrf2). COPA3 maintained the MAPK/ERK-Nrf2 gene expressions that promote stable fibroblast proliferation, and differentiation as well as suppress apoptosis. These findings suggest that COPA3 supplementation increases the heat tolerance capacity, viability, and functional activity of fibroblasts.

Exposure to high thermal conditions for a long time induces apoptosis and decreases total RNA concentration in peripheral blood mononuclear cells among Indian Zebu–Jersey crossbreds

Background and Aim:

Global warming has grave consequences on livestock production systems and profound negative effects on animal production. This study aimed to carry out an in vitro thermal stress stimulation (TSS) of bovine peripheral blood mononuclear cells (PBMCs) using different thermal assault conditions (TACs), including normal to extreme temperatures and varying durations of thermal exposure (DTE) to understand how PBMCs of Indian Zebu–Jersey crossbreds respond to various levels and durations of heat shock.

Materials and Methods:

Ten milliliters of blood were collected from 70 Indian Zebu–Jersey crossbreds under aseptic conditions and were sampled for isolating PBMCs. Peripheral blood mononuclear cells were divided into seven groups, each comprising 10 PBMC samples isolated from 10 different animals. Aliquots of 500 μL of PBMCs were stressed by exposure to different TACs (37, 40, and 45°C) for DTEs of 3 or 6 h. Subsequently, the cells were harvested. The control unstressed samples (500 μL aliquots of PBMCs) were exposed to no TAC (0°C) and zero DTE (0 h). Total RNA from all the treatment groups of PBMCs were isolated and quantitated.

Results:

We found a very strong association between TACs and RNA levels. In addition, PBMCs viability was negatively affected by heat shock. This led to an exponential reduction in PBMC count as TACs toughened. Only 3.59 × 10⁵ ± 0.34 cells/mL were viable after exposure to 45°C for a 6 h DTE. This cell viability was lower than that measured in controls subjected to no stress and zero time DTE (2.56 × 10⁷ ± 0.22 cells/mL). We also observed a reduction in the concentration of RNA isolated from thermally stressed PBMCs.

Conclusion:

In vitro TSS of PBMCs provided biological information on the response of cellular systems to heat shock after exposure to TACs. This will help to mitigate and manage the effects of thermal stress in bovine species. The association between the reduction in PBMC count after in vitro TSS and the expression of heat shock protein 70 gene will be investigated in the future to further understand how Indian Zebu–Jersey crossbreds respond to in vitro thermal conditions. This will be used to determine the in vivo response of Indian Jersey crossbreds to different environmental thermal conditions and will further enable the in vivo understanding of thermotolerance potentials of bovine species for better adaptation, survival, and production performance.

Recent Developments in Cell Shipping Methods

As opposed to remarkable advances in the cell therapy industry, researches reveal inexplicable difficulties associated with preserving and post-thawing cell death. Post cryopreservation apoptosis is a common occurrence that has attracted the attention of scientists to use apoptosis inhibitors. Transporting cells without compromising their survival and function is crucial for any experimental cell-based therapy. Preservation of cells allows the safe transportation of cells between distances and improves quality control testing in clinical and research applications. The vitality of transported cells is used to evaluate the efficacy of transportation strategies. For many decades, the conventional global methods of cell transfer were not only expensive but also challenging and had adverse effects. The first determination of some projects is optimizing cell survival after cryopreservation. The new generation of cryopreservation science wishes to find appropriate and alternative methods for cell transportation to ship viable cells at an ambient temperature without dry ice or in media-filled flasks. The diversity of cell therapies demands new cell shipping methodologies and cryoprotectants. In this review, we tried to summarize novel improved cryopreservation methods and alternatives to cryopreservation with safe and viable cell shipping at ambient temperature, including dry preservation, hypothermic preservation, gel-based methods, encapsulation methods, fibrin microbeads, and osmolyte solution compositions. This article is protected by copyright. All rights reserved.

Population distributions of single-cell adhesion parameters during the cell cycle from high-throughput robotic fluidic force microscopy

Single-cell adhesion plays an essential role in biological and biomedical sciences, but its precise measurement for a large number of cells is still a challenging task. At present, typical force measuring techniques usually offer low throughput, a few cells per day, and therefore are unable to uncover phenomena emerging at the population level. In this work, robotic fluidic force microscopy (FluidFM) was utilized to measure the adhesion parameters of cells in a high-throughput manner to study their population distributions in-depth. The investigated cell type was the genetically engineered HeLa Fucci construct with cell cycle-dependent expression of fluorescent proteins. This feature, combined with the high-throughput measurement made it possible for the first time to characterize the single-cell adhesion distributions at various stages of the cell cycle. It was found that parameters such as single-cell adhesion force and energy follow a lognormal population distribution. Therefore, conclusions based on adhesion data of a low number of cells or treating the population as normally distributed can be misleading. Moreover, we found that the cell area was significantly the smallest, and the area normalized maximal adhesion force was significantly the largest for the colorless cells (the mitotic (M) and early G1 phases). Notably, the parameter characterizing the elongation of the cells until the maximum level of force between the cell and its substratum was also dependent on the cell cycle, which quantity was the smallest for the colorless cells. A novel parameter, named the spring coefficient of the cell, was introduced as the fraction of maximal adhesion force and maximal cell elongation during the mechanical detachment, which was found to be significantly the largest for the colorless cells. Cells in the M phase adhere in atypical way, with so-called reticular adhesions, which are different from canonical focal adhesions. We first revealed that reticular adhesion can exert a higher force per unit area than canonical focal adhesions, and cells in this phase are significantly stiffer. The possible biological consequences of these findings were also discussed, together with the practical relevance of the observed population-level adhesion phenomena.

Photothermal scaffolds/surfaces for regulation of cell behaviors

Regulation of cell behaviors and even cell fates is of great significance in diverse biomedical applications such as cancer treatment, cell-based therapy, and tissue engineering. During the past decades, diverse methods have been developed to regulate cell behaviors such as applying external stimuli, delivering exogenous molecules into cell interior and changing the physicochemical properties of the substrates where cells adhere. Photothermal scaffolds/surfaces refer to a kind of materials embedded or coated with photothermal agents that can absorb light with proper wavelength (usually in near infrared region) and convert light energy to heat; the generated heat shows great potential for regulation of cell behaviors in different ways. In the current review, we summarize the recent research progress, especially over the past decade, of using photothermal scaffolds/surfaces to regulate cell behaviors, which could be further categorized into three types: (i) killing the tumor cells via hyperthermia or thermal ablation, (ii) engineering cells by intracellular delivery of exogenous molecules via photothermal poration of cell membranes, and (iii) releasing a single cell or an intact cell sheet via modulation of surface physicochemical properties in response to heat. In the end, challenges and perspectives in these areas are commented.

Elastin-like Polypeptide-Based Bioink: A Promising Alternative for 3D Bioprinting

Three-dimensional (3D) bioprinting offers a great alternative to traditional techniques in tissue reconstruction, based on seeding cells manually into a scaffold, to better reproduce organs' complexity. When a suitable bioink is engineered with appropriate physicochemical properties, such a process can advantageously provide a spatial control of the patterning that improves tissue reconstruction. The design of an adequate bioink must fulfill a long list of criteria including biocompatibility, printability, and stability. In this context, we have developed a bioink containing a precisely controlled recombinant biopolymer, namely, elastin-like polypeptide (ELP). This material was further chemoselectively modified with cross-linkable moieties to provide a 3D network through photopolymerization. ELP chains were additionally either functionalized with a peptide sequence Gly-Arg-Gly-Asp-Ser (GRGDS) or combined with collagen I to enable cell adhesion. Our ELP-based bioinks were found to be printable, while providing excellent mechanical properties such as stiffness and elasticity in their cross-linked form. Besides, they were demonstrated to be biocompatible, showing viability and adhesion of dermal normal human fibroblasts (NHF). Expressions of specific extracellular matrix (ECM) protein markers as pro-collagen I, elastin, fibrillin, and fibronectin were revealed within the 3D network containing cells after only 18 days of culture, showing the great potential of ELP-based bioinks for tissue engineering.

Numerical Study of Joule Heating Effects on Microfluidics Device Reliability in Electrode Based Devices

In electrode-based microfluidic devices, micro channels having narrow cross sections generate undesirable temperature inside the microfluidic device causing strong thermal distribution (joule heating) that eventually leads to device damage or cell loss. In this work, we investigate the effects of joule heating due to different electrode configuration and found that, electrodes with triangular arrangements produce less heating effect even at applied potential of 30 V, without compromising the performance of the device and separation efficiency. However, certain electrode materials have low thermal gradients but erode the channel quickly thereby affecting the reliability of the device. Our simulation also predicts optimal medium conductivity (10 mS/m with 10 V) for cells to survive inside the channel until they are selectively isolated into the collection outlet. Our investigations will aid the researchers in the designing of efficient and reliable microfluidic devices to overcome joule heating inside the microchannels.

DNA Dyes-Highly Sensitive Reporters of Cell Quantification: Comparison with Other Cell Quantification Methods

Cell quantification is widely used both in basic and applied research. A typical example of its use is drug discovery research. Presently, plenty of methods for cell quantification are available. In this review, the basic techniques used for cell quantification, with a special emphasis on techniques based on fluorescent DNA dyes, are described. The main aim of this review is to guide readers through the possibilities of cell quantification with various methods and to show the strengths and weaknesses of these methods, especially with respect to their sensitivity, accuracy, and length. As these methods are frequently accompanied by an analysis of cell proliferation and cell viability, some of these approaches are also described.

Transfection types, methods and strategies: a technical review

Transfection is a modern and powerful method used to insert foreign nucleic acids into eukaryotic cells. The ability to modify host cells' genetic content enables the broad application of this process in studying normal cellular processes, disease molecular mechanism and gene therapeutic effect. In this review, we summarized and compared the findings from various reported literature on the characteristics, strengths, and limitations of various transfection methods, type of transfected nucleic acids, transfection controls and approaches to assess transfection efficiency. With the vast choices of approaches available, we hope that this review will help researchers, especially those new to the field, in their decision making over the transfection protocol or strategy appropriate for their experimental aims.

Surface-Mediated Intracellular Delivery by Physical Membrane Disruption

Effective and nondestructive intracellular delivery of exogenous molecules and other functional materials into living cells is of importance for diverse biological fundamental research and therapeutic applications, such as gene editing and cell-based therapies. However, for most exogenous molecules, the cell plasma membrane is effectively impermeable and thus remains the greatest barrier to intracellular delivery. In recent years, methods based on surface-mediated physical membrane disruption have attracted considerable attention. These methods exploit the physical properties of the surface to transiently increase the membrane permeability of cells come in contact thereto, thereby facilitating the efficient intracellular delivery of molecules regardless of molecule or target cell type. In this Review, we focus on recent progress, particularly over the past decade, on these surface-mediated membrane disruption-based delivery systems. According to the membrane disruption mechanism, three categories can be recognized: (i) mechanical penetration, (ii) electroporation, and (iii) photothermal poration. Each of these is discussed in turn and a brief perspective on future developments in this promising area is presented.

A multicenter experience using adipose-derived mesenchymal stem cell therapy for cats with chronic, non-responsive gingivostomatitis

BACKGROUND

The ability of mesenchymal stem cells (MSCs) to modulate immune responses inspired a series of clinical trials addressing oral mucosal inflammation. We previously reported on the safety and efficacy of fresh, allogeneic and autologous, adipose-derived mesenchymal stem cells (ASCs) to treat feline gingivostomatitis (FCGS), an oral mucosal inflammatory disease that shares similarities with human oral lichen planus.

METHODS

To meet clinical demand and goals for future commercialization, we determined the feasibility of shipping fresh ASCs to distant clinics and extended our pilot studies to expand safety and efficacy data for shipped and non-shipped ASCs in a cohort of 18 FCGS cats enrolled locally and at a few different locations within the USA.

RESULTS

We found that ASCs retained their viability, phenotype, and function after shipment. ASCs administered systemically resulted in a 72% positive response rate, identical to that noted in our previous studies. Cats that responded to ASC therapy had a significant decrease in circulating globulin concentration and histological evidence of decreased CD3+ T cells and CD20+ B cells in the oral mucosa. Responder cats also had significantly decreased percentages of CD8^lo cells in blood prior to and at 3 months post-ASC therapy. CD8^lo cells may serve as a potential "predictor" for response to systemic ASC therapy.

CONCLUSION

Fresh feline ASCs can be successfully shipped and administered to cats with FCGS. ASCs modulate the immune response and demonstrate efficacy for chronic oral mucosal inflammatory lesions that are characterized by CD8+ T cell inflammation and T cell activation. FCGS is a potentially useful naturally occurring large animal model of human oral inflammatory diseases.

Identification and comprehensive analysis of the characteristics and roles of leucine-rich repeat receptor-like protein kinase (LRR-RLK) genes in Sedum alfredii Hance responding to cadmium stress

Sedum alfredii Hance is a Zn/Cd co-hyperaccumulator and its underlying molecular mechanism of Cd tolerance is worthy to be elucidated. Although numerous studies have reported the uptake, sequestration and detoxification of Cd in S. alfredii Hance, how it senses Cd-stress stimuli and transfers signals within tissues remains unclear. Leucine-rich repeat receptor-like protein kinases (LRR-RLKs) are vital for plant growth, development, immunity and signal transduction. Till now, there is lack of comprehensive studies addressing their functions in S. alfredii Hance responding to Cd stress. In the present study, we identified 60 LRR-RLK genes in S. alfredii Hance based on transcriptome analysis under Cd stress. They were categorized into 11 subfamilies and most of them had highly conserved protein structures and motif compositions. The inter-family diversity provided evidence for their functional divergence, supported by their expression level and profile in tissues under Cd stress. Co-expression network analysis revealed that the most highly connected hubs, Sa0F.522, Sa0F.1036, Sa28F.115 and Sa1F.472, were closely related with other genes involved in metal transport, stimulus response and transcription regulations. Of the ten hub genes exhibiting differential expression dynamics under the short-term Cd stress (Sa0F.522, Sa0F.1036 and Sa28F.115) were dramatically induced in the whole plant. Among them, Sa0F.522 gene was heterologously expressed in a Cd-sensitive yeast cell line and its function in Cd signal perception was confirmed. For the first time, our findings performed a comprehensive analysis of LRR-RLKs in S. alfredii Hance, mapped their expression patterns under Cd stress, and identified the key roles of Sa0F.522, Sa0F.1036 and Sa28F.115 in Cd signal transduction.

Biogenic Au@ZnO core-shell nanocomposites kill Staphylococcus aureus without provoking nuclear damage and cytotoxicity in mouse fibroblasts cells under hyperglycemic condition with enhanced wound healing proficiency

The aim of the present study is focused on the synthesis of Au@ZnO core-shell nanocomposites, where zinc oxide is overlaid on biogenic gold nanoparticles obtained from Hibiscus Sabdariffa plant extract. Optical property of nanocomposites is investigated using UV-visible spectroscopy and crystal structure has been determined using X-ray crystallography (XRD) technique. The presence of functional groups on the surface of Au@ZnO core-shell nanocomposites has been observed by Fourier transforms infrared (FTIR) spectroscopy. Electron microscopy studies revealed the morphology of the above core-shell nanocomposites. The synthesized nanocomposite material has shown antimicrobial and anti-biofilm activity against Staphylococcus aureus and Methicillin Resistant Staphylococcus haemolyticus (MRSH). The microbes are notorious cross contaminant and are known to cause infection in open wounds. The possible antimicrobial mechanism of as synthesized nanomaterials has been investigated against Staphylococcus aureus and obtained data suggests that the antimicrobial activity could be due to release of reactive oxygen species (ROS). Present study has revealed that surface varnishing of biosynthesized gold nanoparticles through zinc oxide has improved its antibacterial proficiency against Staphylococcus aureus, whereas reducing its toxic effect towards mouse fibroblast cells under normal and hyperglycaemic condition. Further studies have been performed in mice model to understand the wound healing efficiency of Au@ZnO nanocomposites. The results obtained suggest the possible and effective use of as synthesized core shell nanocomposites in wound healing.

Use of circulating tumor cells in prospective clinical trials for NSCLC patients – standardization of the pre-analytical conditions

Background:

Circulating tumor cells (CTCs) hold potential for noninvasive diagnosis, prognosis and prediction testing in non-small cell lung cancer (NSCLC) patients. Minimizing degradation or loss of CTCs is pivotal for detection and profiling of the low abundance and fragile CTCs, particularly in clinical trials. We prospectively investigated (NCT02372448) whether a new blood collection device performed better compared to commonly used K3EDTA tubes, when subjected to long-term sample storage.

Methods:

Blood samples were drawn into K3EDTA and blood collection tubes (BCT) (Streck), and filtered by the Isolation by SizE of Tumor/Trophoblastic Cells (ISET® system), for CTC detection in two study populations of NSCLC patients; the training set of 14 patients with stage II/IV NSCLC, and the validation set of 36 patients with stage IV NSCLC). MET expression was evaluated by immunocytochemistry (ICC) and anaplastic lymphoma kinase (ALK) gene rearrangement by break-apart fluorescence in situ hybridization (FISH) on ISET-enriched CTCs.

Results:

Blood processed after 24 h and 48 h in BCT tubes showed stable CTCs counts and integrity, whereas CTCs in K3EDTA tubes showed an altered morphology in all patients. CTCs recovered in BCT or K3EDTA tubes at 24 and 48 h were evaluable by ICC for MET expression and by FISH for ALK rearrangement.

Conclusions:

The BCT tubes gave a high yield and preserved the integrity of CTCs after 24 and 48 h of storage at room temperature, which facilitate their molecular characterization in NSCLC patients entering clinical trials.

Preservation and stability of cell therapy products: recommendations from an expert workshop

If the field of regenerative medicine is to deliver therapies, rapid expansion and delivery over considerable distances to large numbers of patients is needed. This will demand efficient stabilization and shipment of cell products. However, cryopreservation science is poorly understood by life-scientists in general and in recent decades only limited progress has been made in the technology of preservation and storage of cells. Rapid translation of new developments to a broader range of cell types will be vital, as will assuring a deeper knowledge of the fundamental cell biology relating to successful preservation and recovery of cell cultures. This report presents expert consensus on these and other issues which need to be addressed for more efficient delivery of cell therapies.