Non-linear pressure/temperature-dependence of high pressure thermal inactivation of proteolytic Clostridium botulinum type B in foods

Role of Dipicolinic Acid in Heat Resistance of Spores of Clostridium botulinum and Clostridium sporogenes PA3679 by Thermal and Pressure-assisted Thermal Processing

Dipicolinic acid (DPA) is a major constituent of spores and reportedly provides protection against inactivation by various thermal processes; however, the relationship between DPA and resistance towards pressure-assisted thermal processing is not well understood. Thermal and pressure-assisted thermal inactivation studies of Clostridium botulinum nonproteolytic strains QC-B and 610-F, proteolytic strain Giorgio-A, and thermal surrogate Clostridium sporogenes PA3679 spores suspended in ACES buffer (0.05 M, pH 7.0) were performed to determine if a relationship exists between DPA release and log reduction of spores. Thermal inactivation at 80, 83, and 87 °C for nonproteolytic strains and 101, 105, and 108 °C for the proteolytic strain and thermal surrogate were conducted. Pressure-assisted thermal inactivation for nonproteolytic strains at 83 °C/600 MPa and for the proteolytic strain and thermal surrogate at 105 °C/600 MPa were performed. Surviving spores were enumerated by 5-tube MPN method for log reductions and analyzed for released DPA by liquid chromatography-tandem mass spectrometry. The correlation between MPN log reductions, released DPA, and D-values were calculated. A positive correlation between released DPA and log reduction of spores was observed for QC-B and 610-F at 80 and 83 °C (r = 0.6073 - 0.7755; P < 0.01). At 87 °C, a positive correlation was detected for 610-F (r = 0.4242, P < 0.05) and no correlation was observed for QC-B (r = 0.1641; P > 0.05). A strong, positive correlation (r = 0.8359 - 0.9284; P < 0.05) between released DPA and log reduction of spores was observed for Giorgio-A at 101, 105, and 108 °C, and a strong, positive correlation (r = 0.8402; P < 0.05) was observed for PA3679 at 101 °C. A positive correlation (r = 0.5646 - 0.6724; P < 0.01) was observed for QC-B, 610-F, and Giorgio-A after pressure-assisted thermal treatment. No correlation (r = 02494; P > 0.05) was found for PA3679 after pressure-assisted thermal treatment. These results suggest a correlation exists between DPA release and heat resistance; however, the level of correlation varied between strains and temperatures. The findings from this research may aid in the development of spore inactivation strategies targeting the thermal resistance profiles of various strains of C. botulinum spores.

Aspects of high hydrostatic pressure food processing: Perspectives on technology and food safety

The last two decades saw a steady increase of high hydrostatic pressure (HHP) used for treatment of foods. Although the science of biomaterials exposed to high pressure started more than a century ago, there still seem to be a number of unanswered questions regarding safety of foods processed using HHP. This review gives an overview on historical development and fundamental aspects of HHP, as well as on potential risks associated with HHP food applications based on available literature. Beside the combination of pressure and temperature, as major factors impacting inactivation of vegetative bacterial cells, bacterial endospores, viruses, and parasites, factors, such as food matrix, water content, presence of dissolved substances, and pH value, also have significant influence on their inactivation by pressure. As a result, pressure treatment of foods should be considered for specific food groups and in accordance with their specific chemical and physical properties. The pressure necessary for inactivation of viruses is in many instances slightly lower than that for vegetative bacterial cells; however, data for food relevant human virus types are missing due to the lack of methods for determining their infectivity. Parasites can be inactivated by comparatively lower pressure than vegetative bacterial cells. The degrees to which chemical reactions progress under pressure treatments are different to those of conventional thermal processes, for example, HHP leads to lower amounts of acrylamide and furan. Additionally, the formation of new unknown or unexpected substances has not yet been observed. To date, no safety-relevant chemical changes have been described for foods treated by HHP. Based on existing sensitization to non-HHP-treated food, the allergenic potential of HHP-treated food is more likely to be equivalent to untreated food. Initial findings on changes in packaging materials under HHP have not yet been adequately supported by scientific data.

Inactivation of non-proteolytic Clostridium botulinum type E in low-acid foods and phosphate buffer by heat and pressure

The effect of high pressure thermal (HPT) treatments on the inactivation of spores of non-proteolytic type E Clostridium botulinum TMW 2.990 was investigated at high pressures (300 to 600 MPa) and elevated temperatures (80 to 100 °C) in four low-acid foods (steamed sole, green peas with ham, vegetable soup, braised veal) and imidazole phosphate buffer (IPB). In addition, corresponding conventional thermal treatments at ambient pressure were performed to expose possible synergisms of pressure and temperature on spore inactivation. In general, spore count reduction was more efficient by combining pressure and temperatures < 100 °C and the overall process duration could be shortened due to accelerated heating rates (adiabatic effect). Processing at 90 °C and 600 MPa resulted in inactivation below the detection limit after 5 min in all foods except steamed sole. Traditional thermal processing of spores at 90 °C for 10 min, on the other hand, did not result in an estimated 6-log reduction. Additional HPT treatments in steamed sole and IPB did not reveal pronounced food matrix dependent protective effects. Here, varying pressure levels did not appear to be the driving force for spore count reduction in steamed sole at any temperature. By applying a Weibull distribution on destruction kinetics of isobaric/isothermal holding times, 6D-values were calculated. Compression and decompression phase (1 s pressure holding time) had a considerable impact on spore count reduction (max. -2.9 log units) in both, foods and buffer. Hence, compression and decompression phases should directly be included into the total lethal effect of HPT treatments to avoid prolonged holding times and overprocessing.