Determination of 2,4-Dichlorophenoxyacetic acid (2,4-D) in rat serum for pharmacokinetic studies with a simple HPLC method

Analytical methods for determining environmental contaminants of concern in water and wastewater

Control and prevention of environmental pollution have emerged as paramount global concerns. Anthropogenic activities, such as industrial discharges, agricultural runoff, and improper waste disposal, introduce a wide range of contaminants into various ecosystems. These pollutants encompass organic and inorganic compounds, particulates, microorganisms, and disinfection by-products, posing severe threats to human health, ecosystems, and the environment. Effective monitoring methods are indispensable for assessing environmental quality, identifying pollution sources, and implementing remedial measures. This paper suggests that the development and utilization of highly advanced analytical tools are both essential for the analysis of contaminants in water samples, presenting a foundational hypothesis for the review. This paper comprehensively reviews the development and utilization of highly advanced analytical tools which is mandatory for the analysis of contaminants in water samples. Depending on the specific pollutants being studied, the choice of analytical methods widely varies. It also reveals insights into the diverse applications and effectiveness of these methods in assessing water quality and contaminant levels. By emphasizing the critical role of the reviewed monitoring methods, this review seeks to deepen the understanding of pollution challenges and inspire innovative monitoring solutions that contribute to a cleaner and more sustainable global environment.•Urgent global concerns: control and prevention of pollution from diverse sources.•Varied contaminants, diverse methods: comprehensive review of analytical tools.•Inspiring a sustainable future: innovative monitoring for a cleaner environment.

Simultaneous determination of bromoxynil and MCPA in commercial samples and raw materials using reversed phase high performance liquid chromatography

This study encompasses a quick, efficient, repeatable and reproducible analytical method for simultaneous determination of Bromoxynil (3, 5-Dibromo-4-hydroxybenzonitrile) and MCPA (2-methyl-4-chlorophenoxyacetic acid) using RP-HPLC with UV-Detector. Bromoxynil + MCPA is one of the most selective post emergent herbicide formulations for the control of important broad leaf weeds infesting small grains (wheat, barley, oats, rye), conservation reserve program areas and grass grown for seed. Optimum weed control is achieved when Bromoxynil + MCPA is applied to actively growing weed seedlings. So, a simple, repeatable, reproducible and efficient simultaneous analytical method was developed for Bromoxynil + MCPA. The developed method was applied for the detection and quantitation of these pesticides in formulations and raw materials with excellent recoveries. It was validated according to ICH Guidelines with excellent linearity R2 = 0.992 for Bromoxynil and 0.998 for MCPA. For Bromoxynil, LOD = 1.57 mg/L and LOQ = 5.22 mg/L while for MCPA the LOD = 1.08 mg/L and LOQ = 3.62 mg/L was found. The proposed method has shown high precision (RSD %) 0.06% and 0.11% for Bromoxynil and MCPA respectively while the trueness has been calculated in terms of recovery percentage obtained as "mean value of Bromoxynil 99.53% and MCPA 100.10%" which is excellent under optimized conditions. For repeatability and reproducibility, five replicate readings of standard and sample were taken and had found within acceptable limits of relative standard deviation (RSD ≤  ± 2%). Finally, the robustness of the developed method was determined by changing flow rate and mobile phase ratios that has found within the permissible limits (% RSD NMT 1.5). So, the proposed analytical method has found to be more precise, valid and accurate at commercial scale.

Immobilizing white-rot fungi laccase: Toward bio-derived supports as a circular economy approach in organochlorine removal

Despite their high persistence in the environment, organochlorines (OC) are widely used in the pharmaceutical industry, in plastics, and in the manufacture of pesticides, among other applications. These compounds and the byproducts of their decomposition deserve attention and efficient proposals for their treatment. Among sustainable alternatives, the use of ligninolytic enzymes (LEs) from fungi stands out, as these molecules can catalyze the transformation of a wide range of pollutants. Among LEs, laccases (Lac) are known for their efficiency as biocatalysts in the conversion of organic pollutants. Their application in biotechnological processes is possible, but the enzymes are often unstable and difficult to recover after use, driving up costs. Immobilization of enzymes on a matrix (support or solid carrier) allows recovery and stabilization of this catalytic capacity. Agricultural residual biomass is a passive environmental asset. Although underestimated and still treated as an undesirable component, residual biomass can be used as a low-cost adsorbent and as a support for the immobilization of enzymes. In this review, the adsorption capacity and immobilization of fungal Lac on supports made from residual biomass, including compounds such as biochar, for the removal of OC compounds are analyzed and compared with the use of synthetic supports. A qualitative and quantitative comparison of the reported results was made. In this context, the use of peanut shells is highlighted in view of the increasing peanut production worldwide. The linkage of methods with circular economy approaches that can be applied in practice is discussed.

A magnetic molecular imprinting-based fluorescence probe for sensitive and selective detection of 2,4-D herbicide

A new magnetic molecular imprinting-based turn-on fluorescence probe (Fe3 O4 NPs@SiO2 @NBD@MIPs) has been synthesized via a facile sol-gel polymerization for the detection of 2,4-dichlorophenoxyacetic acid (2,4-D). Based on the photoinduced electron transfer (PET) of nitrobenzoxadiazole (NBD), 2,4-D can be recognized by enhancement of NBD fluorescence. With the presence of Fe3 O4 in the core of the probe, this sensor can also be reused many times using magnetic aggregation methods. After the addition of various concentrations of 2,4-D, the fluorescence peak at 530 nm (excitation of 468 nm) increased linearly ranging from 0.1 to 3 μM with a detection limit of 0.023 μM. This sensing system is believed to be available for detecting 2,4-D in real samples, with high recovery rates ranging from 94% to 108% for three spike levels of 2,4-D with precisions below 5%.

Overhauling the ecotoxicological impact of synthetic pesticides using plants' natural products: a focus on Zanthoxylum metabolites

The reduction in agricultural production due to the negative impact of insects and weeds, as well as the health and economic burden associated with vector-borne diseases, has promoted the wide use of chemicals that control these "enemies." However, the use of these synthetic chemicals has been recognized to elicit negative impacts on the environment as well as the health and wellbeing of man. In this study, we presented an overview of recent updates on the environmental and health impacts of synthetic pesticides against agro-pest and disease vectors while exhaustive reviewing the potentials of natural plant products from Zanthoxylum species (Rutaceae) as sustainable alternatives. This study is expected to spur further research on exploiting these plants and their chemicals as safe and effective pesticide entities to minimize the impact of their chemical and synthetic counterparts on health and the environment.

Study of 2,4-D Spectral Characteristics and Its Detection in Zizania Latifolia Using Terahertz Time-Domain Spectroscopy

2,4-Dichlorophenoxyacetic acid (2,4-D) is a common plant growth regulator, which can remain in food and, with long-term consumption, threaten human health. Therefore, it is necessary to propose an effective detection method. Terahertz time-domain spectroscopy technique (THz-TDS) has good advantages in the quantitative and qualitative analysis of most biomolecules due to its rich fingerprint characteristics. In this paper, density functional theory (DFT) was applied to geometry optimization and frequency vibration calculation of 2,4-D, and THz-TDS was used to quantitatively detect 2,4-D in Zizania latifolia. The results showed that there were three characteristic absorption peaks of 2,4-D at 1.36, 1.60, and 2.38 THz, respectively, and the theoretical spectra were in good consistency with experimental spectra, with slight discrepancies. Additionally, the absorption peak at 1.36 THz had the best absorption characteristics and was chosen as the main peak for 2,4-D quantitative analysis. It was demonstrated that the limits of detection (LOD) of 2,4-D in Zizania latifolia were found to be as low as 5%, the absorbance intensity at 1.36 THz showed a good linear relationship (R2 = 0.9854) with 2,4-D concentration from 5% to 30%, and the recovery was 93.29%–98.75%. Overall, this work enriched the fingerprint database of pesticide molecules on the basis of terahertz spectroscopy and could provide a technical support for the detection of 2,4-D in food by terahertz spectroscopy.