A geometric model for the human pulmonary valve in its fully open case

Effect of pulmonary regurgitation on cardiac functions based on a human bi-ventricle model

BACKGROUND AND OBJECTIVE

Assessing the severity of pulmonary regurgitation (PR) and identifying optimal clinically relevant indicators for its treatment is crucial, yet standards for quantifying PR remain unclear in clinical practice. Computational modelling of the heart is in the process of providing valuable insights and information for cardiovascular physiology research. However, the advancements of finite element computational models have not been widely applied to simulate cardiac outputs in patients with PR. Furthermore, a computational model that incorporates both the left ventricle (LV) and right ventricle (RV) can be valuable in assessing the relationship between left and right ventricular morphometry and septal motion in PR patients. To enhance our understanding of the effect of PR on cardiac functions and mechanical behaviour, we developed a human bi-ventricle model to simulate five cases with varying degrees of PR severity.

METHODS

This bi-ventricle model was built using a patient-specific geometry and a widely used myofibre architecture. The myocardial material properties were described by a hyperelastic passive constitutive law and a modified time-varying elastance active tension model. To simulate realistic cardiac functions and the dysfunction of the pulmonary valve in PR disease cases, open-loop lumped parameter models representing systemic and pulmonary circulatory systems were designed.

RESULTS

In the baseline case, pressures in the aorta and main pulmonary artery and ejection fractions of both the LV and RV were within normal physiological ranges reported in the literature. The end-diastolic volume (EDV) of the RV under varying degrees of PR was comparable to the reported cardiac magnetic resonance imaging data. Moreover, RV dilation and interventricular septum motion from the baseline to the PR cases were clearly observed through the long-axis and short-axis views of the bi-ventricle geometry. The RV EDV in the severe PR case increased by 50.3% compared to the baseline case, while the LV EDV decreased by 18.1%. The motion of the interventricular septum was consistent with the literature. Furthermore, ejection fractions of both the LV and RV decreased as PR became severe, with LV ejection fraction decreasing from 60.5% at baseline to 56.3% in the severe case and RV ejection fraction decreasing from 51.8% to 46.8%. Additionally, the average myofibre stress of the RV wall at end-diastole significantly increased due to PR, from 2.7±12.1 kPa at baseline to 10.9±26.5 kPa in the severe case. The average myofibre stress of the LV wall at end-diastole increased from 3.7±18.1 kPa to 4.3±20.3 kPa.

CONCLUSIONS

This study established a foundation for the computational modelling of PR. The simulated results showed that severe PR leads to reduced cardiac outputs in both the LV and RV, clearly observable septum motion, and a significant increase in the average myofibre stress in the RV wall. These findings demonstrate the potential of the model for further exploration of PR.

Pulmonary valve morphometry revisited: Clinical implications for valvular and supravalvular interventions

In this cadaver-based study, we aimed to present a novel approach to pulmonary valve (PV) anatomy, morphometry, and geometry to offer comprehensive information on PV structure. The 182 autopsied human hearts were investigated morphometrically. The largest PV area was seen for the coaptation center plane, followed by basal ring and the tubular plane (626.7 ± 191.7 mm² vs. 433.9 ± 133.6 mm² vs. 290.0 ± 110.1 mm² , p < 0.001). In all leaflets, fenestrations are noted and occur in 12.5% of PVs. Only in 31.3% of PVs, the coaptation center is located in close vicinity of the PV geometric center. Similar-sized sinuses were found in 35.7% of hearts, in the remaining cases, significant heterogeneity was seen in size. The mean sinus depth was: left anterior 15.59 ± 2.91 mm, posterior: 16.04 ± 2.82 mm and right anterior sinus: 16.21 ± 2.81 mm and the mean sinus height: left anterior 15.24 ± 3.10 mm, posterior: 19.12 ± 3.79 mm and right anterior sinus: 18.59 ± 4.03 mm. For males, the mean pulmonary root perimeters and areas were significantly larger than those for females. Multiple forward stepwise regression model showed that anthropometric variables might predict the coaptation center plane (sex, age, and heart weight; R²  = 33.8%), tubular plane (sex, age, and BSA; R²  = 20.5%) and basal ring level area (heart weight and sex; R²  = 17.1%). In conclusion, the largest pulmonary root area is observed at the coaptation center plane, followed by the basal ring and tubular plane. The PV geometric center usually does not overlap valve coaptation center. Significant heterogeneity is observed in the size of sinuses and leaflets within and between valves. Anthropometric variables may be used to predict pulmonary root dimensions.

Clinical Impact of Computational Heart Valve Models

This paper provides a review of engineering applications and computational methods used to analyze the dynamics of heart valve closures in healthy and diseased states. Computational methods are a cost-effective tool that can be used to evaluate the flow parameters of heart valves. Valve repair and replacement have long-term stability and biocompatibility issues, highlighting the need for a more robust method for resolving valvular disease. For example, while fluid-structure interaction analyses are still scarcely utilized to study aortic valves, computational fluid dynamics is used to assess the effect of different aortic valve morphologies on velocity profiles, flow patterns, helicity, wall shear stress, and oscillatory shear index in the thoracic aorta. It has been analyzed that computational flow dynamic analyses can be integrated with other methods to create a superior, more compatible method of understanding risk and compatibility.

Materials and manufacturing perspectives in engineering heart valves: a review

Valvular heart diseases (VHD) are a major health burden, affecting millions of people worldwide. The treatments for such diseases rely on medicine, valve repair, and artificial heart valves including mechanical and bioprosthetic valves. Yet, there are countless reports on possible alternatives noting long-term stability and biocompatibility issues and highlighting the need for fabrication of more durable and effective replacements. This review discusses the current and potential materials that can be used for developing such valves along with existing and developing fabrication methods. With this perspective, we quantitatively compare mechanical properties of various materials that are currently used or proposed for heart valves along with their fabrication processes to identify challenges we face in creating new materials and manufacturing techniques to better mimick ​the performance of native heart valves.