Draft genome of multiple resistance donor plant Sinapis alba: An insight into SSRs, annotations and phylogenetics

GWAS for the identification of introgressed candidate genes of Sinapis alba with increased branching numbers in backcross lines of the allohexaploid Brassica

Plant architecture is a crucial determinant of crop yield. The number of primary (PB) and secondary branches (SB) is particularly significant in shaping the architecture of Indian mustard. In this study, we analyzed a panel of 86 backcross introgression lines (BCILs) derived from the first stable allohexaploid Brassicas with 170 Sinapis alba genome-specific SSR markers to identify associated markers with higher PB and SB through association mapping. The structure analysis revealed three subpopulations, i.e., P1, P2, and P3, in the association panel containing a total of 11, 33, and 42 BCILs, respectively. We identified five novel SSR markers linked to higher PB and SB. Subsequently, we explored the 20 kb up- and downstream regions of these SSR markers to predict candidate genes for improved branching and annotated them through BLASTN. As a result, we predicted 47 complete genes within the 40 kb regions of all trait-linked markers, among which 35 were identified as candidate genes for higher PB and SB numbers in BCILs. These candidate genes were orthologous to ANT, RAMOSUS, RAX, MAX, MP, SEU, REV, etc., branching genes. The remaining 12 genes were annotated for additional roles using BLASTP with protein databases. This study identified five novel S. alba genome-specific SSR markers associated with increased PB and SB, as well as 35 candidate genes contributing to plant architecture through improved branching numbers. To the best of our knowledge, this is the first report of introgressive genes for higher branching numbers in B. juncea from S. alba.

The Current Developments in Medicinal Plant Genomics Enabled the Diversification of Secondary Metabolites' Biosynthesis

Medicinal plants produce important substrates for their adaptation and defenses against environmental factors and, at the same time, are used for traditional medicine and industrial additives. Plants have relatively little in the way of secondary metabolites via biosynthesis. Recently, the whole-genome sequencing of medicinal plants and the identification of secondary metabolite production were revolutionized by the rapid development and cheap cost of sequencing technology. Advances in functional genomics, such as transcriptomics, proteomics, and metabolomics, pave the way for discoveries in secondary metabolites and related key genes. The multi-omics approaches can offer tremendous insight into the variety, distribution, and development of biosynthetic gene clusters (BGCs). Although many reviews have reported on the plant and medicinal plant genome, chemistry, and pharmacology, there is no review giving a comprehensive report about the medicinal plant genome and multi-omics approaches to study the biosynthesis pathway of secondary metabolites. Here, we introduce the medicinal plant genome and the application of multi-omics tools for identifying genes related to the biosynthesis pathway of secondary metabolites. Moreover, we explore comparative genomics and polyploidy for gene family analysis in medicinal plants. This study promotes medicinal plant genomics, which contributes to the biosynthesis and screening of plant substrates and plant-based drugs and prompts the research efficiency of traditional medicine.

Development of genome-specific SSR markers for the identification of introgressed segments of Sinapis alba in the Brassica juncea background

Sinapis alba L. (white mustard) is recognized for carrying host resistance against several biotic stresses including, Alternaria brassicae, which is responsible for blight disease in cultivated Brassica. However, another cultivated Brassica has a dearth for genetic resistance for these stresses due to its narrow genetic base. Therefore, we performed introgression of the genomic regions of S. alba into backcross progenies of B. juncea + S. alba somatic hybrids. These advanced generations with S. alba chromosomal segments are named B. juncea-S. alba introgression lines (ILs). In the present study, we developed the S. alba genome-specific microsatellites from the draft genome to track the S. alba genome introgressions and responsible regions for resistance to A. brassicae. For developing these SSR markers, the unique contigs of S. alba draft genome were identified through BLASTN with B. juncea, B. rapa, B. nigra, and B. oleracea reference genome assemblies, including mitochondrial and chloroplast genomes, and further used for marker development. Out of 403,423 contigs, we have identified 65,343 non-hit contigs of S. alba that yielded a total of 1231 genome-specific microsatellites, out of which 1107 were expected to produce a single allele upon amplification. Out of the total SSRs, 234 primer pairs were randomly picked from whole-genome and validated between B. juncea and S. alba genomes for their specificity. In the validation experiment, these markers gave a single amplicon into S. alba, while they did not amplify in B. juncea genome. Of these, 59 microsatellites were used to track S. alba introgressions in 80 BC2F3 lines. To the best of our knowledge, this is the first time that these two genetic resources are developed in the form of B. juncea-S. alba ILs and S. alba-specific markers. Therefore, both the resources unlock a new avenue of Brassica breeding for biotic and abiotic stresses along with quality traits.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-022-03402-0.

Development of de-novo transcriptome assembly and SSRs in allohexaploid Brassica with functional annotations and identification of heat-shock proteins for thermotolerance

Crop Brassicas contain monogenomic and digenomic species, with no evidence of a trigenomic Brassica in nature. Through somatic fusion (Sinapis alba + B. juncea), a novel allohexaploid trigenomic Brassica (H1 = AABBSS; 2n = 60) was produced and used for transcriptome analysis to uncover genes for thermotolerance, annotations, and microsatellite markers for future molecular breeding. Illumina Novaseq 6000 generated a total of 76,055,546 paired-end raw reads, which were used for de-novo assembly, resulting in the development of 486,066 transcripts. A total of 133,167 coding sequences (CDSs) were predicted from transcripts with a mean length of 507.12 bp and 46.15% GC content. The BLASTX search of CDSs against public protein databases showed a maximum of 126,131 (94.72%) and a minimum of 29,810 (22.39%) positive hits. Furthermore, 953,773 gene ontology (GO) terms were found in 77,613 (58.28%) CDSs, which were divided into biological processes (49.06%), cellular components (31.67%), and molecular functions (19.27%). CDSs were assigned to 144 pathways by a pathway study using the KEGG database and 1,551 pathways by a similar analysis using the Reactome database. Further investigation led to the discovery of genes encoding over 2,000 heat shock proteins (HSPs). The discovery of a large number of HSPs in allohexaploid Brassica validated our earlier findings for heat tolerance at seed maturity. A total of 15,736 SSRs have been found in 13,595 CDSs, with an average of one SSR per 4.29 kb length and an SSR frequency of 11.82%. The first transcriptome assembly of a meiotically stable allohexaploid Brassica has been given in this article, along with functional annotations and the presence of SSRs, which could aid future genetic and genomic studies.

Introgression and QTL mapping conferring resistance for Alternaria brassicae in the backcross progeny of Sinapis alba + Brassica juncea somatic hybrids

A total of three QTLs, responsible for A. brassicae resistance were introgressed into S. alba - B. juncea introgression lines from S. alba and mapped through donor genome-specific SSR markers. Alternaria brassicae is a key pathogen of the Brassicaceae family causing severe blight disease to oilseed crops that leads to heavy yield losses due to lack of resistance source within cultivated Brassicas. However, the host resistance present in the Sinapis alba, an allied member of the Brassicaceae family is still unexplored precisely due to the unavailability of segregating population for Alternaria blight resistance and scarcity of donor genome-specific genetic markers. The present study was undertaken to identify quantitative trait loci governing resistance to Alternaria blight which was introgressed from S. alba to the backcross population of stable S. alba + B. juncea somatic hybrids (2n = 60; AABBSS). The second backcross population showed significant phenotypic variations for Alternaria blight ranging from immune to highly susceptible phenotype, thus suggesting quantitative nature of resistance for the disease. A subset of 154 BC₂F_3-4 lines was used for disease screening and genotyping with 234 S. alba genome-specific microsatellite markers. As a result of the study, twelve linkage groups were developed corresponding to 12 chromosomes of S. alba (n = 12) covering a length of 1694.02 cM. The chromosomes 5 and 11 harbored a total of 1 (Abr-01), and 2 (Abr-02, and Abr-03) QTLs detected by ICIM-ADD mapping method at LOD score values 3.7, 5.12, and 6.74, respectively. The QTLs identified during the study have a range of 5.51-10.87 percent phenotypic variations for disease resistance. To the best of our knowledge, this is the first report of QTLs introgression for A. brassicae resistance in cultivated Brassica from an allied member of Brassicaceae.

Alternaria Black Spot (Alternaria brassicae) Infection Severity on Cruciferous Oilseed Crops

The increase in the cultivation area of cruciferous oilseed crops and the use of short crop rotation has resulted in the enhanced spread of several major pests in Northern latitudes. There is currently limited information about incidence and severity of Alternaria black spot disease (Alternaria brassicae) on the main oilseed crop, spring oilseed rape (Brassica napus), in the Northern Baltics. Thus, spring oilseed rape and five alternative cruciferous oilseed crops were selected and their resistance to black spot disease was evaluated in field conditions during two growing seasons. We hypothesized that spring oilseed rape is more susceptible to Alternaria black spot disease than other alternative cruciferous oilseed crops. Both growing seasons were warmer and drier compared to the long-term average, and were thus suitable for A. brassicae development and assessments. In both years, incidence of Alternaria black spot infection was recorded on all cruciferous species, yet the disease development differed considerably among the crops. During both growing seasons, black mustard (B. nigra) plants were the most infected. Based on our observations during warm growing seasons we conclude that alternative oilseed crops such as Sinapis alba, Eruca sativa and Raphanus sativus are more resistant to the Alternaria black spot infection than the traditional oilseed crops and thus, possess a great potential to grow with limited chemical disease control in Northern Baltic conditions.

Exploring the gene pool of Brassica napus by genomics-based approaches

De novo allopolyploidization in Brassica provides a very successful model for reconstructing polyploid genomes using progenitor species and relatives to broaden crop gene pools and understand genome evolution after polyploidy, interspecific hybridization and exotic introgression. B. napus (AACC), the major cultivated rapeseed species and the third largest oilseed crop in the world, is a young Brassica species with a limited genetic base resulting from its short history of domestication, cultivation, and intensive selection during breeding for target economic traits. However, the gene pool of B. napus has been significantly enriched in recent decades that has been benefit from worldwide effects by the successful introduction of abundant subgenomic variation and novel genomic variation via intraspecific, interspecific and intergeneric crosses. An important question in this respect is how to utilize such variation to breed crops adapted to the changing global climate. Here, we review the genetic diversity, genome structure, and population-level differentiation of the B. napus gene pool in relation to known exotic introgressions from various species of the Brassicaceae, especially those elucidated by recent genome-sequencing projects. We also summarize progress in gene cloning, trait-marker associations, gene editing, molecular marker-assisted selection and genome-wide prediction, and describe the challenges and opportunities of these techniques as molecular platforms to exploit novel genomic variation and their value in the rapeseed gene pool. Future progress will accelerate the creation and manipulation of genetic diversity with genomic-based improvement, as well as provide novel insights into the neo-domestication of polyploid crops with novel genetic diversity from reconstructed genomes.

Review on the Development and Applications of Medicinal Plant Genomes

With the development of sequencing technology, the research on medicinal plants is no longer limited to the aspects of chemistry, pharmacology, and pharmacodynamics, but reveals them from the genetic level. As the price of next-generation sequencing technology becomes affordable, and the long-read sequencing technology is established, the medicinal plant genomes with large sizes have been sequenced and assembled more easily. Although the review of plant genomes has been reported several times, there is no review giving a systematic and comprehensive introduction about the development and application of medicinal plant genomes that have been reported until now. Here, we provide a historical perspective on the current situation of genomes in medicinal plant biology, highlight the use of the rapidly developing sequencing technologies, and conduct a comprehensive summary on how the genomes apply to solve the practical problems in medicinal plants, like genomics-assisted herb breeding, evolution history revelation, herbal synthetic biology study, and geoherbal research, which are important for effective utilization, rational use and sustainable protection of medicinal plants.

Current Status of the Disease-Resistant Gene(s)/QTLs, and Strategies for Improvement in Brassica juncea

Brassica juncea is a major oilseed crop in tropical and subtropical countries, especially in south-east Asia like India, China, Bangladesh, and Pakistan. The widespread cultivation of genetically similar varieties tends to attract fungal pathogens which cause heavy yield losses in the absence of resistant sources. The conventional disease management techniques are often expensive, have limited efficacy, and cause additional harm to the environment. A substantial approach is to identify and use of resistance sources within the Brassica hosts and other non-hosts to ensure sustainable oilseed crop production. In the present review, we discuss six major fungal pathogens of B. juncea: Sclerotinia stem rot (Sclerotinia sclerotiorum), Alternaria blight (Alternaria brassicae), White rust (Albugo candida), Downy mildew (Hyaloperonospora parasitica), Powdery mildew (Erysiphe cruciferarum), and Blackleg (Leptoshaeria maculans). From discussing studies on pathogen prevalence in B. juncea, the review then focuses on highlighting the resistance sources and quantitative trait loci/gene identified so far from Brassicaceae and non-filial sources against these fungal pathogens. The problems in the identification of resistance sources for B. juncea concerning genome complexity in host subpopulation and pathotypes were addressed. Emphasis has been laid on more elaborate and coordinated research to identify and deploy R genes, robust techniques, and research materials. Examples of fully characterized genes conferring resistance have been discussed that can be transformed into B. juncea using advanced genomics tools. Lastly, effective strategies for B. juncea improvement through introgression of novel R genes, development of pre-breeding resistant lines, characterization of pathotypes, and defense-related secondary metabolites have been provided suggesting the plan for the development of resistant B. juncea.

Recent Findings Unravel Genes and Genetic Factors Underlying Leptosphaeria maculans Resistance in Brassica napus and Its Relatives

Among the Brassica oilseeds, canola (Brassica napus) is the most economically significant globally. However, its production can be limited by blackleg disease, caused by the fungal pathogen Lepstosphaeria maculans. The deployment of resistance genes has been implemented as one of the key strategies to manage the disease. Genetic resistance against blackleg comes in two forms: qualitative resistance, controlled by a single, major resistance gene (R gene), and quantitative resistance (QR), controlled by numerous, small effect loci. R-gene-mediated blackleg resistance has been extensively studied, wherein several genomic regions harbouring R genes against L. maculans have been identified and three of these genes were cloned. These studies advance our understanding of the mechanism of R gene and pathogen avirulence (Avr) gene interaction. Notably, these studies revealed a more complex interaction than originally thought. Advances in genomics help unravel these complexities, providing insights into the genes and genetic factors towards improving blackleg resistance. Here, we aim to discuss the existing R-gene-mediated resistance, make a summary of candidate R genes against the disease, and emphasise the role of players involved in the pathogenicity and resistance. The comprehensive result will allow breeders to improve resistance to L. maculans, thereby increasing yield.

Development of a Yellow-Seeded Stable Allohexaploid Brassica Through Inter-Generic Somatic Hybridization With a High Degree of Fertility and Resistance to Sclerotinia sclerotiorum

The Brassica coenospeceis have treasure troves of genes that could be beneficial if introgressed into cultivated Brassicas to combat the current conditions of climate change. Introducing genetic variability through plant speciation with polyploidization is well documented, where ploidy augmentation of inter-generic allohexaploids using somatic hybridization has significantly contributed to genetic base broadening. Sinapis alba is a member of the Brassicaceae family that possesses valuable genes, including genes conferring resistance to Sclerotinia sclerotiorum, Alternaria brassicae, pod shattering, heat, and drought stress. This work aimed to synthesize stable allohexaploid (AABBSS) Brassica while incorporating the yellow-seed trait and resistance to S. sclerotiorum stem rot. The two fertile and stable allohexaploids were developed by polyethylene glycol mediated protoplast fusions between Brassica juncea (AABB) and S. alba (SS) and named as JS1 and JS2. These symmetric hybrids (2n = 60) were validated using morphological and molecular cytology techniques and were found to be stable over consecutive generations. The complete chromosome constitution of the three genomes was determined through genomic in situ hybridization of mitotic cells probed with S. alba genomic DNA labeled with fluorescein isothiocyanate. These two allohexaploids showed 24 hybridization signals demonstrating the presence of complete diploid chromosomes from S. alba and 36 chromosomes from B. juncea. The meiotic pollen mother cell showed 30 bivalent sets of all the 60 chromosomes and none of univalent or trivalent observed during meiosis. Moreover, the backcross progeny 1 plant revealed 12 hybridization signals out of a total of 48 chromosome counts. Proper pairing and separation were recorded at the meiotic metaphase and anaphase, which proved the stability of the allohexaploid and their backcross progeny. When screening, the allohexaploid (JS2) of B. juncea and S. alba displayed a high degree of resistance to S. sclerotiorum rot along with a half-yellow and half-brown (mosaic) seed coat color, while the B. juncea and S. alba allohexaplopid1 (JS1) displayed a yellow seed coat color with the same degree of resistance to Sclerotinia rot.