Soft computing models to predict the compressive strength of GGBS/FA- geopolymer concrete

A comprehensive study on engineering and sustainability characteristics with emphasizing on 3R's approach in building construction

The study assesses the mechanical efficiency, long-lasting characteristics, microstructure, and sustainability of sustainable concrete (SC) samples through several optimization methods, emphasizing the significance of the 3Rs (recycle, reuse, reduce) approach in the construction sector. The study uses advanced techniques like the Taguchi method, grey relational analysis (GRA), analysis of variance (ANOVA), and signal-noise ratio (SNR) to optimize parameters affecting the performance of SC. In this study, the properties of SC are assessed by considering various parameters. These parameters include the use of 10 %, 20 %, and 30 % of ground granulated blast furnace slag (GGBFS) as a replacement for fly ash (FA). Additionally, six different binder contents ranging from 300 kg/m3 to 600 kg/m3 are examined. The study also investigates three different molarities of sodium hydroxide (NaOH) (8 M, 12 M, and 16 M), three different ratios of alkaline activators (AA) (1.5, 2.0, and 2.5), three different AA to-binder ratios (0.30, 0.35, and 0.40), and curing temperature (CT) of 30 °C, 60 °C, and 90 °C. The study includes fresh properties such as fresh density (FD) and slump, mechanical properties such as tensile strength (TS), flexural strength (FS), modulus of elasticity (MOE), and compressive strength (CS), and durability studies such as dry density (DD), impact strength, water absorption (WA), and sorptivity. The blended proportions were obtained using the Taguchi method. The study shows that GGBFS accelerates geopolymerization in FA-based concrete, reducing setting time and early-age CS. FA is crucial for setting time, workability, and CS enhancement. GGBFS increases the densities of fresh and hardened concrete, with a highly correlated increase, allowing accurate hardened density prediction with a coefficient of 0.9057. The CS of the cube SC surpassed 40 MPa, irrespective of variables such as the AA ratio, CT, and NaOH molarity. The trail mix with a binder concentration of 600 kg/m3, 30 % GGBFS content, 12 M NaOH molarity, 1.5 AA ratio, 0.35 AA to binder ratio, and 90 °C CT exhibited the greatest strength. Mixtures containing 10 % GGBFS can attain a CS above 30 MPa after 28 days, making them suitable for structural purposes. The T18 mix exhibited a compact Calcium (alumino) silicate hydrate (C-A-S-H) and N-A-S-H gel, whereas the T3 mix displayed a varied and permeable structure. The study used GRA, ANOVA, and SNR methods to analyze properties varying by six variables, finding GGBFS content as the most influencing parameter. The study found that the SC had a lower sustainability score than the OPC mix, but had better energy efficiency.

Influence of activator ratios and concentration on the physio-mechanical and microstructural characteristics of the geopolymers derived from sandstone processing waste

Natural stones have been utilized to meet various needs of human civilization since ancient times. The exploitation of any resource is associated with the production of redundant materials called wastes. Sandstone waste (SW) is one such waste obtained during the industrial processing of sandstones. Due to its siliceous composition, extensive yield, and disorganized dumping, noxious conditions related to land and human health are promoted. However, the lack of comprehensive engineering studies, mineralogical analysis, and design methodologies associated with the utilization of sandstone processing wastes restricted their applicability only to fillers or partial substitutes with pozzolans and traditional cement in meager volumes. In the past, limited efforts have been made to utilize SW as a construction entity, particularly for binding purposes. Thus, to enhance the scope of its utilization, a comprehensive investigation has been performed in this research to transform sandstone waste into a novel construction material by geopolymerization. Mix design tailoring and laboratory tests were implemented to understand the effects of sodium hydroxide concentration and sodium silicate to sodium hydroxide ratio on the dissolution and physio-mechanical characteristics of SW-based geopolymers. The activator-to-binder ratio was restricted to 0.4 to obtain pastes with sufficient workability without hindering the properties of the matrix. Besides, a high temperature-curing regime was selected based on SW's crystallographic and reactivity analysis. Subsequently, a total of 48 samples were prepared and tested at the curing age of 28 days. Detailed characterization of SW and SW-based geopolymer samples was performed using optical, X-ray, and infrared spectroscopies aided by electron imaging and thermogravimetric techniques. SW-based geopolymer samples showed compressive strengths in the range of 6-12 MPa, ~2 to 3 times higher than those obtained in previous experimentations. Phase analysis and microstructural examinations confirmed SW's participation in geopolymerization. Overall, it could be advocated that geopolymerization is an innovative approach for solving issues related to the disposal and re-utilization of SW, extending its possible application to the fields of cement mixes, wall tiles, mortars, and masonry as per the commendations of ASTM and ACI committee.

Mechanical Framework for Geopolymer Gels Construction: An Optimized LSTM Technique to Predict Compressive Strength of Fly Ash-Based Geopolymer Gels Concrete

As an environmentally responsible alternative to conventional concrete, geopolymer concrete recycles previously used resources to prepare the cementitious component of the product. The challenging issue with employing geopolymer concrete in the building business is the absence of a standard mix design. According to the chemical composition of its components, this work proposes a thorough system or framework for estimating the compressive strength of fly ash-based geopolymer concrete (FAGC). It could be possible to construct a system for predicting the compressive strength of FAGC using soft computing methods, thereby avoiding the requirement for time-consuming and expensive experimental tests. A complete database of 162 compressive strength datasets was gathered from the research papers that were published between the years 2000 and 2020 and prepared to develop proposed models. To address the relationships between inputs and output variables, long short-term memory networks were deployed. Notably, the proposed model was examined using several soft computing methods. The modeling process incorporated 17 variables that affect the CSFAG, such as percentage of SiO2 (SiO2), percentage of Na2O (Na2O), percentage of CaO (CaO), percentage of Al2O3 (Al2O3), percentage of Fe2O3 (Fe2O3), fly ash (FA), coarse aggregate (CAgg), fine aggregate (FAgg), Sodium Hydroxide solution (SH), Sodium Silicate solution (SS), extra water (EW), superplasticizer (SP), SH concentration, percentage of SiO2 in SS, percentage of Na2O in SS, curing time, curing temperature that the proposed model was examined to several soft computing methods such as multi-layer perception neural network (MLPNN), Bayesian regularized neural network (BRNN), generalized feed-forward neural networks (GFNN), support vector regression (SVR), decision tree (DT), random forest (RF), and LSTM. Three main innovations of this study are using the LSTM model for predicting FAGC, optimizing the LSTM model by a new evolutionary algorithm called the marine predators algorithm (MPA), and considering the six new inputs in the modeling process, such as aggregate to total mass ratio, fine aggregate to total aggregate mass ratio, FASiO2:Al2O3 molar ratio, FA SiO2:Fe2O3 molar ratio, AA Na2O:SiO2 molar ratio, and the sum of SiO2, Al2O3, and Fe2O3 percent in FA. The performance capacity of LSTM-MPA was evaluated with other artificial intelligence models. The results indicate that the R2 and RMSE values for the proposed LSTM-MPA model were as follows: MLPNN (R2 = 0.896, RMSE = 3.745), BRNN (R2 = 0.931, RMSE = 2.785), GFFNN (R2 = 0.926, RMSE = 2.926), SVR-L (R2 = 0.921, RMSE = 3.017), SVR-P (R2 = 0.920, RMSE = 3.291), SVR-S (R2 = 0.934, RMSE = 2.823), SVR-RBF (R2 = 0.916, RMSE = 3.114), DT (R2 = 0.934, RMSE = 2.711), RF (R2 = 0.938, RMSE = 2.892), LSTM (R2 = 0.9725, RMSE = 1.7816), LSTM-MPA (R2 = 0.9940, RMSE = 0.8332), and LSTM-PSO (R2 = 0.9804, RMSE = 1.5221). Therefore, the proposed LSTM-MPA model can be employed as a reliable and accurate model for predicting CSFAG. Noteworthy, the results demonstrated the significance and influence of fly ash and sodium silicate solution chemical compositions on the compressive strength of FAGC. These variables could adequately present variations in the best mix designs discovered in earlier investigations. The suggested approach may also save time and money by accurately estimating the compressive strength of FAGC with low calcium content.

Optimizing and hyper-tuning machine learning models for the water absorption of eggshell and glass-based cementitious composite

Cementitious composites' performance degrades in extreme conditions, making it more important to enhance its resilience. To further the adaptability of eco-friendly construction, waste materials are increasingly being repurposed. Cementitious composites deteriorate in both direct and indirect ways due to the facilitation of hostile ion transport by water. The effects of using eggshell and glass powder as partial substitutes for cement and sand in mortar on the water-absorption capacity were investigated using machine learning (ML) modeling techniques such as Gene Expression Programming (GEP) and Multi Expression Programming (MEP). To further assess the importance of inputs, sensitivity analysis and interaction research were carried out. The water absorption property of cementitious composites was precisely estimated by the generated ML models. It was noted that the MEP model, with an R2 of 0.90, and the GEP model, with an R2 of 0.88, accurately predicted results. The sensitivity analysis revealed that the absorption capacity of the mortar was most affected by the presence of eggshell powder, sand, and glass powder. GEP and MEP model's significance lies in the fact that they offer one-of-a-kind mathematical formulas that can be applied to the prediction of features in another database. The mathematical models resulting from this study can help scientists and engineers rapidly assess, enhance, and rationalize mixture proportioning. The built models can theoretically compute the water absorption of cement mortar made from eggshell powder and glass powder based on varied input parameters, resulting in cost and time savings.