In Situ Amplified Chemiluminescent Detection of DNA and Immunoassay of IgG Using Special-Shaped Gold Nanoparticles as Label

Real-time PCR versus traditional and Nano-based ELISA in early detection of murine trichinellosis

Trichinellosis is a serious foodborne zoonosis. It poses a serious risk to public health worldwide. Early serological diagnosis of trichinellosis is influenced by an immunological 'silent' phase following infection. This highlights the necessity for developing sensitive diagnostic approaches to be employed when antibodies cannot be detected. In this work, the validity of traditional ELISA, Nano-ELISA and real time polymerase chain reaction (PCR) were evaluated in early diagnosis of Trichinella spiralis. Swiss albino mice were orally infected with 100 and 300 muscle larvae/mouse. Mice were sacrificed 4, 6, 8, 10, 15, and 28 days post-infection (dpi). Blood samples were tested for circulating antigen by traditional ELISA and Nano-ELISA using anti-rabbit polyclonal IgG conjugated with AgNPs and for Rep gene by SYBR green real-time PCR. Rep gene detection by SYBR green real-time PCR could detect T. spiralis with 100% sensitivity in the mild infection group at 8 dpi, while in the severe infection group it reached 100% sensitivity at 4 dpi. Nano-ELISA could detect T. spiralis circulating antigen from 4 dpi in both mild and severe infection and reached 100% sensitivity at 8 dpi and 6 dpi in mild and severe infection, respectively. However, traditional ELISA could detect T. spiralis circulating antigen from 6 dpi and reached maximum sensitivity at 15 dpi in the mild infection group, while in the severe infection group detection began at 4 dpi and reached 100% sensitivity at 8 dpi. Nano-ELISA and real time PCR, using Rep gene, are useful tools for the detection of early T. spiralis infection even in its mild infection state.

Ultrasmall Au nanoclusters for bioanalytical and biomedical applications: the undisclosed and neglected roles of ligands in determining the nanoclusters' catalytic activities

Significantly different from conventional Au nanoparticles, ultrasmall Au nanoclusters (NCs) consisting of several to about a hundred Au atoms with a size below 2 nm exhibit a strong quantum confinement effect, and possess an intriguing molecular-like highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) transition, quantized charging, intrinsic chirality, and special fluorescence properties, as well as high catalytic activities. In virtue of their unique molecular-like electronic structure, remarkable physicochemical properties, mild preparation conditions and good biocompatibility, Au NCs have been having a profound impact on bioanalytical and biomedical applications, such as biosensing, biological imaging, cell markers, drug delivery, photodynamic/photothermal therapy, and biomedical toxicology. As an indispensable part of Au NCs, shell ligands not only stabilize and protect the structure of Au NCs, but also have an important influence on the structure and biocatalytic activities of Au NCs. Nevertheless, the effect of shell ligands on the biocatalytic activities of Au NCs has not been paid much attention or even ignored. In this Focus article, thus, the structure and biocatalytic activities of Au NCs are discussed from the perspective of the shell ligands. Particular emphasis is directed to the discussion and exploration of the undisclosed and neglected roles of shell ligands in the biocatalytic activities of Au NCs, which are of fundamental importance to the unraveling of charge transfer behaviors and biocatalytic processes of Au NCs. In addition, the future directions to explore the mechanism of shell ligands affecting the biocatalytic activities of Au NCs, such as surface ligand engineering of Au NCs, advanced surface/interface in situ characterization techniques, theoretical analysis, and the nanobiology of Au NCs, are also put forward.

Ultrasensitive chemiluminescence biosensors using nucleic acid-functionalized silver-cysteine nanowires as signal amplifying labels

Ultrasensitive chemiluminescence (CL) sensors for biomolecules (DNA and proteins) have been developed by adopting DNA-functionalized silver-cysteine hybrid nanowires (p-SCNWs) as signal amplifying labels. The sensing is established from a sandwich-type DNA hybridization, where the target DNA strands are initially hybridized with the capture DNA located at paramagnetic microspheres (PMs) and subsequently hybridized with p-SCNWs functionalized with the signal DNA probe. After magnetic separation, p-SCNWs on the hybrids were completely decomposed with HNO3 to release numerous silver ions. The powerful catalysis of silver ions toward the redox reaction of K2S2O8-Mn2+-H3PO4 causes the generation of KMnO4 that is capable of oxidizing luminol at high pH, triggering an amplified chemiluminescent signal emission. The sensing combines the extraordinary sensitivity of the catalytic chemiluminescence technology and the amplifying strategy via releasing large quantities of silver ions as the catalyst from each hybrid, enabling the assay of target DNA strands at a concentration as low as 0.34 fM. The CL signals associated with single-base pair mismatched DNA strands and non-complementary DNA strands are able to be discriminated well from the CL signal related to the complementary DNA hybridization. Likewise, the combination of p-SCNWs functionalized with an aptamer and PMs/aptamer/thrombin complex allowed the chemiluminescence sensing of thrombin with a low limit of detection corresponding to 0.17 pM.

Reproducible Plasmonic Nanopyramid Array of Various Metals for Highly Sensitive Refractometric and Surface-Enhanced Raman Biosensing

Localized surface plasmon resonance (LSPR) biosensors show great potential for practical/commercial use in clinical diagnosis, home healthcare, environmental analysis, and public healthcare. However, two main issues, that is, low refractometric sensitivity and low reproducibility (large-area uniformity and batch-to-batch consistency), hinder the extensive applications of LSPR biosensors. Therefore, plasmonic nanostructures with high sensitivity and excellent reproducibility are desirable for preparing reliable LSPR sensors. Herein, we have fabricated plasmonic nanopyramid arrays (NPAs) for several batches with reproducible morphology and optical properties by elastic soft lithography and metal thermal evaporation. NPAs of various metals (i.e., Al, Au, and Ag) were also prepared by thermal evaporation with the according metals. The transmission spectra of these NPAs showed several narrow LSPR peaks in the visible-infrared wavelength region. The refractometric sensitivities of the LSPR peaks were systematically studied, and high refractometric sensitivities of 774.0, 472.8, and 421.0 nm/RIU were achieved on Al, Au, and Ag NPAs, respectively. To demonstrate the potential of the NPAs for multiplex applications, we first applied this highly sensitive Al NPA biosensor to monitoring the process of proliferation of HeLa cancer cells, in situ and in real time. Then, we demonstrated that the Au NPA was able to identify the absorbed analytes on its surface through the surface-enhanced Raman scattering spectrum. In addition, the finite difference time domain simulations were performed to reveal the electromagnetic field enhancement on NPAs. Because of the properties of high sensitivity and excellent reproducibility of the metal NPA LSPR substrates, as well as the simplicity and cost efficiency of the fabrication method, our proposed work will accelerate the practical use of LSPR sensors.

A novel method for sensitive, low-cost and portable detection of hepatitis B surface antigen using a personal glucose meter

Hepatitis B virus (HBV) infection is the major public health problem leading cause of death worldwide. The most important diagnostic marker for this infection is hepatitis B surface antigen (HBsAg). In this study, a novel, inexpensive, portable and sensitive ELISA method was designed and investigated for diagnosis of HBsAg based on the functionalized Fe₃O₄ and Al₂O₃ nanoparticles, with the strategy for detecting the concentration of glucose using a cheap and accessible personal glucose meter (PGM). The ELISA system was constructed using hepatitis B antibody against HBsAg immobilized on streptavidin coated magnetic iron oxide particles (S-Fe₃O₄) as the capture antibody (Ab₁). In addition, another hepatitis B antibody against different epitope of HBsAg (Ab₂) and glucoamylase both were immobilized on Al₂O₃ nanoparticles. After formation of the sandwich immune complex between Ab₁ and Ab₂ immobilized on S-Fe₃O₄ and Al₂O₃ NPs, respectively, through HBsAg, starch was converted into glucose using glucoamylase. Then, the glucose concentration was measured using PGM. The concentration of HBsAg was calculated based on the linear relation between the concentrations of HBsAg and glucose. Under optimal conditions, this assay showed detection limit values of 0.3 to 0.4 ng ml^-1 for "ay" and "ad" subtypes of HBsAg, respectively. The results indicate that the designed assay is comparable to the commercial kits in terms of sensitivity, on-site, specificity, cost, simplicity, portability and reproducibility. The presented method can be used in disadvantaged areas of the world and blood transfusion centers. To the best of our knowledge, this is the first report of using PGMs for HBSAg detection.

The Applications of Gold Nanoparticle-Initialed Chemiluminescence in Biomedical Detection

Chemiluminescence technique as a novel detection method has gained much attention in recent years owning to the merits of high sensitivity, wider linear ranges, and low background signal. Similarly, nanotechnology especially for gold nanoparticles has emerged as detection tools due to their unique physical and chemical properties. Recently, it has become increasingly popular to couple gold nanoparticles with chemiluminescence technique in biological agents' detection. In this review, we describe the superiority of both chemiluminescence and gold nanoparticles and conclude the different applications of gold nanoparticle-initialed chemiluminescence in biomedical detection.

Simultaneous Determination of Size and Quantification of Gold Nanoparticles by Direct Coupling Thin layer Chromatography with Catalyzed Luminol Chemiluminescence

The increasing use of metal-based nanoparticle products has raised concerns in particular for the aquatic environment and thus the quantification of such nanomaterials released from products should be determined to assess their environmental risks. In this study, a simple, rapid and sensitive method for the determination of size and mass concentration of gold nanoparticles (AuNPs) in aqueous suspension was established by direct coupling of thin layer chromatography (TLC) with catalyzed luminol-H2O2 chemiluminescence (CL) detection. For this purpose, a moving stage was constructed to scan the chemiluminescence signal from TLC separated AuNPs. The proposed TLC-CL method allows the quantification of differently sized AuNPs (13 nm, 41 nm and 100 nm) contained in a mixture. Various experimental parameters affecting the characterization of AuNPs, such as the concentration of H2O2, the concentration and pH of the luminol solution, and the size of the spectrometer aperture were investigated. Under optimal conditions, the detection limits for AuNP size fractions of 13 nm, 41 nm and 100 nm were 38.4 μg L(-1), 35.9 μg L(-1) and 39.6 μg L(-1), with repeatabilities (RSD, n = 7) of 7.3%, 6.9% and 8.1% respectively for 10 mg L(-1) samples. The proposed method was successfully applied to the characterization of AuNP size and concentration in aqueous test samples.

Effects of bipyramidal gold nanoparticles and gold nanorods on the detection of immunoglobulins

The influence of different shapes of gold nanoparticles and techniques (SPR and SWV) on the sensitivity of biosensors was investigated, using IgG detection as a model system.

Chemiluminescent labels released from long spacer arm-functionalized magnetic particles: a novel strategy for ultrasensitive and highly selective detection of pathogen infections

Previously, the unique advantages provided by chemiluminescence (CL) and magnetic particles (MPs) have resulted in the development of many useful nucleic acid detection methods. CL is highly sensitive, but when applied to MPs, its intensity is limited by the inner filter-like effect arising from excess dark MPs. Herein, we describe a modified strategy whereby CL labels are released from MPs to eliminate this negative effect. This approach relies on (1) the magnetic capture of target molecules on long spacer arm-functionalized magnetic particles (LSA-MPs), (2) the conjugation of streptavidin-alkaline phosphatase (SA-AP) to biotinylated amplicons of target pathogens, (3) the release of CL labels (specifically, AP tags), and (4) the detection of the released labels. CL labels were released from LSA-MPs through LSA ultrasonication or DNA enzymolysis, which proved to be the superior method. In contrast to conventional MPs, LSA-MPs exhibited significantly improved CL detection, because of the introduction of LSA, which was made of water-soluble carboxymethylated β-1,3-glucan. Detection of hepatitis B virus with this technique revealed a low detection limit of 50 fM, high selectivity, and excellent reproducibility. Thus, this approach may hold great potential for early stage clinical diagnosis of infectious diseases.

Highly sensitive homogenous chemiluminescence immunoassay using gold nanoparticles as label

Homogeneous immunoassay is becoming more and more attractive for modern medical diagnosis because it is superior to heterogeneous immunoassay in sample and reagent consumption, analysis time, portability and disposability. Herein, a universal platform for homogeneous immunoassay, using human immunoglobulin G (IgG) as a model analyte, has been developed. This assay relies upon the catalytic activity of gold nanoparticles (AuNPs) on luminol-AgNO3 chemiluminescence (CL) reaction. The immunoreaction of antigen and antibody can induce the aggregation of antibody-functionalized AuNPs, and after aggregation the catalytic activity of AuNPs on luminol-AgNO3 CL reaction is greatly enhanced. Without any separation steps, a CL signal is generated upon addition of a trigger solution, and the CL intensity is directly correlated to the quantity of IgG. The detection limit of IgG was estimated to be as low as 3pg/mL, and the sensitivity was better than that of the reported AuNPs-based CL immunoassay for IgG.

Effect of aggregated silver nanoparticles on luminol chemiluminescence system and its analytical application

We found that after silver nanoparticles (AgNPs) aggregated, its catalytic activity on luminol CL reaction obviously changed, and the change characteristic was closely related to the sizes of AgNPs. UV-visible spectra, X-ray photoelectron spectra, zeta potential and transmission electron microscopy studies were carried out to investigate the CL effect mechanism. The different CL responses of aggregated AgNPs with different size were suggested to be due to the two effects of quantum size and electron density in nanoparticle's conduction bands, and which one played a major role. The poisonous organic contaminants such as anilines, could induce the aggregation of AgNPs, were observed to affect effectively the luminol-H2O2-7 nm and 15 nm AgNPs CL systems and were detectable by use of a flow injection method with the enhanced or inhibited CL detection.

Preparation of graphene oxide-based surface plasmon resonance biosensor with Au bipyramid nanoparticles as sensitivity enhancer

A sensitive and selective wavelength-modulation surface plasmon resonance (SPR) biosensor based on graphene oxide (GO) and Au bipyramids (AuBPs) is reported for determination of bovine IgM. GO sheets with lengths of 100-300 nm are synthesized and assembled on amine-modified Au film. The large surface area and abundant functional groups of GO allow the efficient immobilization of antibody. AuBPs are nanoparticles with a penta-twinned crystal structure, which have a sharp localized surface plasmon resonance (LSPR) band because of their high monodispersity. In the optimal conditions, the GO-based biosensor with AuBPs as sensitivity enhancers shows a satisfactory response to bovine IgM in the concentration range of 0.03-32 μg mL(-1). For contrast, traditional biosensor, GO-based biosensor and GO-based biosensor with Au nanorods (AuNRs) as sensitivity enhancers for antigen detection were also investigated. Consequently, the as-prepared GO sheets function as promising support for antibody and GO-based SPR biosensor using AuBPs as enhancers has the highest sensitivity among the four types of biosensors.

Gold nanorods-enhanced rhodamine B-permanganate chemiluminescence and its analytical application

A novel enhanced chemiluminescence system was developed by applying gold nanorods (Au NRs) as catalysts in rhodamine B-permanganate reaction. Au NRs with three different aspect ratios were synthesized by seed mediated growth method and characterized by UV-Vis spectra and transmission electron microscopy. It was demonstrated that Au NRs have much higher catalytic effect than spherical nanoparticles on rhodamine B-permanganate chemiluminescence reaction. Among various sizes of Au NRs, those with average aspect ratio of 3.0 were found to have the most remarkable catalytic activity. As an analytical application of the new chemiluminescence system, albumin as a model protein was quantified based on its interaction with NRs. Albumin binds to Au NRs active surfaces and inhibits their catalytic action and therefore decreases the intensity of chemiluminescence. This diminution effect is linearly related to the concentration of the human and bovine serum albumin over the ranges of 0.45-90 and 0.75-123 nmol L(-1), respectively with the corresponding limits of detection of 0.18 and 0.30 nmol L(-1). The method was successfully applied to the determination of albumin in human and bovine serum samples.

One-step green synthesis and characterization of leaf extract-mediated biocompatible silver and gold nanoparticles from Memecylon umbellatum

In this experiment, green-synthesized silver and gold nanoparticles were produced rapidly by treating silver and gold ions with an extract of Memecylon umbellatum leaf. The reaction process was simple and easy to handle, and was monitored using ultraviolet-visible spectroscopy. The effect of the phytochemicals present in M. umbellatum, including saponins, phenolic compounds, phytosterols, and quinones, on formation of stable silver and gold nanoparticles was investigated by Fourier-transform infrared spectroscopy. The morphology and crystalline phase of the nanoparticles were determined by transmission electron microscopy and energy-dispersive x-ray spectroscopy. The results indicate that the saponins, phytosterols, and phenolic compounds present in the plant extract play a major role in formation of silver and gold nanoparticles in their respective ions in solution. The characteristics of the nanoparticles formed suggest application of silver and gold nanoparticles as chemical sensors in the future. Given the simple and eco-friendly approach for synthesis, these nanoparticles could easily be commercialized for large-scale production.

Decorating PtCo bimetallic alloy nanoparticles on graphene as sensors for glucose detection by catalyzing luminol chemiluminescence

A new type of PtCo(x) @graphene nanocomposite is prepared by a simple chemical solution method, which can dramatically enhance the chemiluminescence (CL) intensity of luminol-H(2)O(2) system, making it possible for the detection of glucose through measuring the H(2)O(2) produced from its catalytic oxidation.

An ultrasensitive chemiluminescence biosensor for carcinoembryonic antigen based on autocatalytic enlargement of immunogold nanoprobes

A sensitive flow injection chemiluminescence assay for carcinoembryonic antigen (CEA) detection based on signal amplification with gold nanoparticles (NPs) is reported in the present work. The sandwich system of CEA/anti-CEA/goat-anti-mouse IgG functionalized Au nanoparticles was used as the sensing platform. In order to improve detection sensitivity, a further gold enlargement step was developed based on the autocatalytic Au deposition of gold nanoprobes via the reduction of AuCl₄⁻ to Au⁰ on their surface in the presence of NH₂OH·HCl. AuCl₄⁻, which is a soluble product of gold nanoprobes, served as an analyte in the CL reaction for the indirect measurement of CEA. Under optimized conditions, the CL intensity of the system was linearly related to the logarithm of CEA concentration in the range of 100 pg·mL⁻¹ to 1,000 ng·mL⁻¹, with a detection limit of 20 pg·mL⁻¹.

Enzyme-free colorimetric bioassay based on gold nanoparticle-catalyzed dye decolorization

A novel, enzyme-free and aptamer-based colorimetric platform for protein detection has been developed, which takes advantage of aptamer-functionalized magnetic beads (MBs) for target capture, concentration and separation, and aptamer-conjugated gold nanoparticle (AuNP)-catalyzed color bleaching reaction of methyl orange (MO) to generate the colorimetric signals. It was demonstrated that the proposed colorimetric sensing strategy enables simple, cost-effective, sensitive and specific thrombin detection without the use of any enhancing solutions and enzymes. Herein, by naked eye observation, we can detect the human thrombin with a detection limit of approximately 320 pM, which can be further decreased to 30 pM with the help of a UV-vis instrument. In addition, this method also works for targets with two or more binding sites.

Sandwich-type immunosensors and immunoassays exploiting nanostructure labels: A review

Methods based on sandwich-type immunosensors and immunoassays have been developed for detection of multivalent antigens/analytes with more than one eptiope due to the use of two matched antibodies. High-affinity antibodies and appropriate labels are usually employed for the amplification of detectable signal. Recent research has looked to develop innovative and powerful novel nanoparticle labels, controlling and tailoring their properties in a very predictable manner to meet the requirements of specific applications. This articles reviews recent advances, exploiting nanoparticle labels, in the sandwich-type immunosensors and immunoassays. Routine approaches involve noble metal nanoparticles, carbon nanomaterials, semiconductor nanoparticles, metal oxide nanostructures, and hybrid nanostructures. The enormous signal enhancement associated with the use of nanoparticle labels and with the formation of nanoparticle-antibody-antigen assemblies provides the basis for sensitive detection of disease-related proteins or biomolecules. Techniques commonly rely on the use of biofunctionalized nanoparticles, inorganic-biological hybrid nanoparticles, and signal tag-doped nanoparticles. Rather than being exhaustive, this review focuses on selected examples to illustrate novel concepts and promising applications. Approaches described include the biofunctionalized nanoparticles, inorganic-biological hybrid nanoparticles, and signal tage-doped nanoparticles. Further, promising application in electrochemical, mass-sensitive, optical and multianalyte detection are discussed in detail.

Ultrasensitive multianalyte electrochemical immunoassay based on metal ion functionalized titanium phosphate nanospheres

A novel multianalyte electrochemical immunoassay was developed for ultrasensitive detection of human cardiopathy biomarkers cardiac troponin I (cTnI) and human heart-type fatty-acid-binding protein (FABP) using metal ion functionalized titanium phosphate nanospheres (TiP-metal ion) as labels. The metal ions could be detected directly through square wave voltammetry (SWV) without metal preconcentration, and the distinct voltammetric peaks had a close relationship with each sandwich-type immunoreaction. The position and size of the peaks reflected the identity and level of the corresponding antigen. The large amount of metal ions loading on the TiP nanospheres greatly amplified the detection signals, and the good biocompatibility of graphene nanoribbons (GONRs) retained good stability for the sandwich-type immunoassay. The proposed immunoassay exhibited high sensitivity and selectivity for the detection of cTnI and FABP. The linear relationships between electrochemical signals and the concentrations of cTnI and FABP were obtained in the range of 0.05 pg/mL-50 ng/mL and 0.05 pg/mL-50 ng/mL, respectively. The detection limits of cTnI and HIgG were 1 and 3 fg/mL (S/N = 3), respectively. Moreover, the immunoassay accurately detected the concentrations of cTnI and FABP in human serum samples, which were demonstrated to have excellent correlations with the standard enzyme linked immunosorbent assay (ELISA) method. The results suggested that the electrochemical immunoassay would be promising in the point-of-care diagnostics application of clinical screening of acute myocardial infarction (AMI) biomarkers.

Highly stable electrochemical immunosensor for carcinoembryonic antigen

The long-term stability of sensing interfaces is an important issue in biosensor fabrication. A novel stable gold nanoparticle (AuNP)-modified glassy carbon (GC) electrode interface (GC-Ph-AuNP)-based biosensor for detecting carcinoembryonic antigen (CEA) was developed. GC electrodes were modified with 1,4-phenylenediamine to form a stable layer, and then AuNPs were bound onto the GC electrodes through CAu bonds. Anti-CEA was directly adsorbed on AuNPs fixed on the GC electrode. The linear range of the immunosensor was from 10 fg to 100 ng mL(-1) with a detection limit of 3 fg mL(-1) (S/N=3). The current of the immunosensor was increased by 4% after one month. The GC-Ph-AuNP immunosensor showed high sensitivity, a wide linear range, low detection limit, and good selectivity and stability. The immobilization method of the immunosensor could be widely applied to construct other immunosensors.

Sensitive competitive flow injection chemiluminescence immunoassay for IgG using gold nanoparticle as label

A sensitive competitive flow injection chemiluminescence (CL-FIA) immunoassay for immunoglobulin G (IgG) was developed using gold nanoparticle as CL label. In the configuration, anti-IgG antibody was immobilized on a glass capillary column surface by 3-(aminopropyl)-triethoxysilane and glutaraldehyde to form immunoaffinity column. Analyte IgG and gold nanoparticle labeled IgG were passed through the immunoaffinity column mounted in a flow system and competed for the surface-confined anti-IgG antibody. CL emission was generated from the reaction between luminol and hydrogen peroxide in the presence of Au (III), generated from chemically oxidative dissolution of gold nanoparticle by an injection of 0.10 mol L(-1) HCl-0.10 mol L(-1) NaCl solution containing 0.10 mmol L(-1) Br(2). The concentration of analyte IgG was inversely related to the amount of bound gold nanoparticle labeled IgG and the CL intensity was linear with the concentration of analyte IgG from 1.0 ng mL(-1) to 40 ng mL(-1) with a detection limit of 5.2×10(-10) gm L(-1). The whole assay time including the injections and washing steps was only 30 min for one sample, which was competitive with CL immunoassays based on a gold nanoparticle label and magnetic separation. This work demonstrates that the CL immunoassay incorporation of nanoparticle label and flow injection is promising for clinical assay with sensitivity and high-speed.