MALDI/MS-based epitope mapping of antigens bound to immobilized antibodies

Mass Spectrometric ITEM-ONE and ITEM-TWO Analyses Confirm and Refine an Assembled Epitope of an Anti-Pertuzumab Affimer

Intact Transition Epitope Mapping-One-step Non-covalent force Exploitation (ITEM-ONE) analysis reveals an assembled epitope on the surface of Pertuzumab, which is recognized by the anti-Pertuzumab affimer 00557_709097. It encompasses amino acid residues NSGGSIYNQRFKGR, which are part of CDR2, as well as residues FTLSVDR, which are located on the variable region of Pertuzumab's heavy chain and together form a surface area of 1381.46 Å2. Despite not being part of Pertuzumab's CDR2, the partial sequence FTLSVDR marks a unique proteotypic Pertuzumab peptide. Binding between intact Pertuzumab and the anti-Pertuzumab affimer was further investigated using the Intact Transition Epitope Mapping-Thermodynamic Weak-force Order (ITEM-TWO) approach. Quantitative analysis of the complex dissociation reaction in the gas phase afforded a quasi-equilibrium constant (KD m0g#) of 3.07 × 10-12. The experimentally determined apparent enthalpy (ΔHm0g#) and apparent free energy (ΔGm0g#) of the complex dissociation reaction indicate that the opposite reaction-complex formation-is spontaneous at room temperature. Due to strong binding to Pertuzumab and because of recognizing Pertuzumab's unique partial amino acid sequences, the anti-Pertuzumab affimer 00557_709097 is considered excellently suitable for implementation in Pertuzumab quantitation assays as well as for the accurate therapeutic drug monitoring of Pertuzumab in biological fluids.

Identification of a specific surface epitope of OmpC for Escherichia coli O157:H7 with protein topology facilitated affinity mass spectrometry

Abstract

The goal of this work was to identify the target protein and epitope of a previously reported Escherichia coli O157:H7 (ECO157)–specific monoclonal antibody (mAb) 2G12. mAb 2G12 has shown high specificity for the recovery and detection of ECO157. To achieve this goal, the target protein was first separated by two-dimensional gel electrophoresis (2-DE) and located by Western blot (WB). The protein spots were identified to be the outer membrane protein (Omp) C by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF–MS). After that, the target protein was purified by immunoaffinity chromatography (IAC) and subjected to in situ enzymatic cleavage of the vulnerable peptides. Eight eluted peptides of OmpC identified by liquid chromatography–tandem mass spectrometry (LC–MS/MS) were further mapped onto the homologous protein structure of E. coli OmpC (2IXX). The topology of OmpC showed that three peptides had extracellular loops. Epitope mapping with overlapping peptide library and sequence homology analysis revealed that the epitope consisted of a specific peptide, “LGVING,” and an adjacent conservative peptide, “TQTYNATRVGSLG.” Both peptides loop around the overall structure of the epitope. To test the availability of the epitope when ECO157 was grown under different osmolarity, pH, and nutrition levels, the binding efficacy of mAb 2G12 with ECO157 grown in these conditions was evaluated. Results further demonstrated the good stability of this epitope under potential stressful environmental conditions. In summary, this study revealed that mAb 2G12 targeted one specific and one conservative extracellular loop (peptide) of the OmpC present on ECO157, and the epitope was stable and accessible on ECO157 cells grown in different environment.

Key points

• OmpC is the target of a recently identified ECO157-specific mAb 2G12.

• Eight peptides were identified from the OmpC by using LC–MS/MS.

• The specificity of mAb 2G12 is mainly determined by the “LGVING” peptide.

Supplementary Information

The online version contains supplementary material available at 10.1007/s00253-021-11511-8.

Structural Aspects of the Allergen-Antibody Interaction

The development of allergic disease involves the production of IgE antibodies upon allergen exposure in a process called sensitization. IgE binds to receptors on the surface of mast cells and basophils, and subsequent allergen exposure leads to cross-linking of IgE antibodies and release of cell mediators that cause allergy symptoms. Although this process is quite well-understood, very little is known about the epitopes on the allergen recognized by IgE, despite the importance of the allergen-antibody interaction for the allergic response to occur. This review discusses efforts to analyze allergen-antibody interactions, from the original epitope mapping studies using linear peptides or recombinant allergen fragments, to more sophisticated technologies, such as X-ray crystallography and nuclear magnetic resonance. These state-of-the-art approaches, combined with site-directed mutagenesis, have led to the identification of conformational IgE epitopes. The first structures of an allergen (egg lysozyme) in complex with Fab fragments from IgG antibodies were determined in the 1980s. Since then, IgG has been used as surrogate for IgE, due to the difficulty of obtaining monoclonal IgE antibodies. Technical developments including phage display libraries have contributed to progress in epitope mapping thanks to the isolation of IgE antibody constructs from combinatorial libraries made from peripheral blood mononuclear cells of allergic donors. Most recently, single B cell antibody sequencing and human hybridomas are new breakthrough technologies for finally obtaining human IgE monoclonal antibodies, ideal for epitope mapping. The information on antigenic determinants will facilitate the design of hypoallergens for immunotherapy and the investigation of the fundamental mechanisms of the IgE response.

Pathogenic IgG4 autoantibodies from endemic pemphigus foliaceus recognize a desmoglein-1 conformational epitope

Fogo Selvagem (FS), the endemic form of pemphigus foliaceus, is mediated by pathogenic IgG4 autoantibodies against the amino-terminal extracellular cadherin domain of the desmosomal cadherin desmoglein 1 (Dsg1). Here we define the detailed epitopes of these pathogenic antibodies. Proteolytic footprinting showed that IgG4 from 95% of FS donor sera (19/20) recognized a 16-residue peptide (A129LNSMGQDLERPLELR144) from the EC1 domain of Dsg1 that overlaps the binding site for an adhesive-partner desmosomal cadherin molecule. Mutation of Dsg1 residues M133 and Q135 reduced the binding of FS IgG4 autoantibodies to Dsg1 by ∼50%. Molecular modeling identified two nearby EC1 domain residues (Q82 and V83) likely to contribute to the epitope. Mutation of these residues completely abolished the binding of FS IgG4 to Dsg1. Bead aggregation assays showed that native binding interactions between Dsg1 and desmocollin 1 (Dsc1), which underlie desmosome structure, were abolished by Fab fragments of FS IgG4. These results further define the molecular mechanism by which FS IgG4 autoantibodies interfere with desmosome structure and lead to cell-cell detachment, the hallmark of this disease.

Mass spectrometric epitope mapping

Mass spectrometric epitope mapping has become a versatile method to precisely determine a soluble antigen's partial structure that directly interacts with an antibody in solution. Typical lengths of investigated antigens have increased up to several 100 amino acids while experimentally determined epitope peptides have decreased in length to on average 10-15 amino acids. Since the early 1990s more and more sophisticated methods have been developed and have forwarded a bouquet of suitable approaches for epitope mapping with immobilized, temporarily immobilized, and free-floating antibodies. While up to now monoclonal antibodies have been mostly used in epitope mapping experiments, the applicability of polyclonal antibodies has been proven. The antibody's resistance towards enzymatic proteolysis has been of key importance for the two mostly applied methods: epitope excision and epitope extraction. Sample consumption has dropped to low pmol amounts on both, the antigen and the antibody. While adequate in-solution sample handling has been most important for successful epitope mapping, mass spectrometric analysis has been found the most suitable read-out method from early on. The rapidity by which mass spectrometric epitope mapping nowadays is executed outperforms all alternative methods. Thus, it can be asserted that mass spectrometric epitope mapping has reached a state of maturity, which allows it to be used in any mass spectrometry laboratory. After 25 years of constant and steady improvements, its application to clinical samples, for example, for patient characterization and stratification, is anticipated in the near future. © 2016 Wiley Periodicals, Inc. Mass Spec Rev 37:229-241, 2018.

Synthetic B-Cell Epitopes Eliciting Cross-Neutralizing Antibodies: Strategies for Future Dengue Vaccine

Dengue virus (DENV) is a major public health threat worldwide. A key element in protection from dengue fever is the neutralising antibody response. Anti-dengue IgG purified from DENV-2 infected human sera showed reactivity against several peptides when evaluated by ELISA and epitope extraction techniques. A multi-step computational approach predicted six antigenic regions within the E protein of DENV-2 that concur with the 6 epitopes identified by the combined ELISA and epitope extraction approach. The selected peptides representing B-cell epitopes were attached to a known dengue T-helper epitope and evaluated for their vaccine potency. Immunization of mice revealed two novel synthetic vaccine constructs that elicited good humoral immune responses and produced cross-reactive neutralising antibodies against DENV-1, 2 and 3. The findings indicate new directions for epitope mapping and contribute towards the future development of multi-epitope based synthetic peptide vaccine.

Epitope location for two monoclonal antibodies against human cystatin C, representing opposite aggregation inhibitory properties

Human cystatin C (hCC), like many other amyloidogenic proteins, dimerizes and possibly makes aggregates by subdomain swapping. Inhibition of the process should suppress the fibrillogenesis leading to a specific amyloidosis (hereditary cystatin C amyloid angiopathy, HCCAA). It has been reported that exogenous agents like monoclonal antibodies against cystatin C are able to suppress formation of cystatin C dimers and presumably control the neurodegenerative disease. We have studied in detail two monoclonal antibodies (mAbs) representing very different aggregation inhibitory potency, Cyst10 and Cyst28, to find binding sites in hCC sequence responsible for the immunocomplex formation and pave the way for possible immunotherapy of HCCAA. We used the epitope extraction/excision mass spectrometry approach with the use of different enzymes complemented by affinity studies with synthetic hCC fragments as a basic technique for epitope identification. The results were analyzed in the context of hCC structure allowing us to discuss the binding sites for both antibodies. Epitopic sequences for clone Cyst28 which is a highly potent dimerization inhibitor were found in N-terminus, loop 1 and 2 (L1, L2) and fragments of β2 and β3 strands. The crucial difference between conformational epitope sequences found for both mAbs seems to be the lack of interactions with hCC via N-terminus and the loop 1 in the case of mAb Cyst10. Presumably the interactions of mAbs with hCC via L1 and β sheet fragments make the hCC structure rigid and unable to undergo the swapping process.

Epitope specificity determines pathogenicity and detectability in ANCA-associated vasculitis

Anti-neutrophil cytoplasmic antibody-associated (ANCA-associated) small vessel necrotizing vasculitis is caused by immune-mediated inflammation of the vessel wall and is diagnosed in some cases by the presence of myeloperoxidase-specific antibodies (MPO-ANCA). This multicenter study sought to determine whether differences in ANCA epitope specificity explain why, in some cases, conventional serologic assays do not correlate with disease activity, why naturally occurring anti-MPO autoantibodies can exist in disease-free individuals, and why ANCA are undetected in patients with ANCA-negative disease. Autoantibodies from human and murine samples were epitope mapped using a highly sensitive epitope excision/mass spectrometry approach. Data indicated that MPO autoantibodies from healthy individuals had epitope specificities different from those present in ANCA disease. Importantly, this methodology led to the discovery of MPO-ANCA in ANCA-negative disease that reacted against a sole linear sequence. Autoantibodies against this epitope had pathogenic properties, as demonstrated by their capacity to activate neutrophils in vitro and to induce nephritis in mice. The confounder for serological detection of these autoantibodies was the presence of a fragment of ceruloplasmin in serum, which was eliminated in purified IgG, allowing detection. These findings implicate immunodominant epitopes in the pathology of ANCA-associated vasculitis and suggest that autoantibody diversity may be common to other autoimmune diseases.

Antibody protection reveals extended epitopes on the human TSH receptor

Stimulating, and some blocking, antibodies to the TSH receptor (TSHR) have conformation-dependent epitopes reported to involve primarily the leucine rich repeat region of the ectodomain (LRD). However, successful crystallization of TSHR residues 22-260 has omitted important extracellular non-LRD residues including the hinge region which connects the TSHR ectodomain to the transmembrane domain and which is involved in ligand induced signal transduction. The aim of the present study, therefore, was to determine if TSHR antibodies (TSHR-Abs) have non-LRD binding sites outside the LRD. To obtain this information we employed the method of epitope protection in which we first protected TSHR residues 1-412 with intact TSHR antibodies and then enzymatically digested the unprotected residues. Those peptides remaining were subsequently delineated by mass spectrometry. Fourteen out of 23 of the reported stimulating monoclonal TSHR-Ab crystal contact residues were protected by this technique which may reflect the higher binding energies of certain residues detected in this approach. Comparing the protected epitopes of two stimulating TSHR-Abs we found both similarities and differences but both antibodies also contacted the hinge region and the amino terminus of the TSHR following the signal peptide and encompassing cysteine box 1 which has previously been shown to be important for TSH binding and activation. A monoclonal blocking TSHR antibody revealed a similar pattern of binding regions but the residues that it contacted on the LRD were again distinct. These data demonstrated that conformationally dependent TSHR-Abs had epitopes not confined to the LRDs but also incorporated epitopes not revealed in the available crystal structure. Furthermore, the data also indicated that in addition to overlapping contact regions within the LRD, there are unique epitope patterns for each of the antibodies which may contribute to their functional heterogeneity.

MALDI-ToF mass spectrometry for studying noncovalent complexes of biomolecules

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) has been demonstrated to be a valuable tool to investigate noncovalent interactions of biomolecules. The direct detection of noncovalent assemblies is often more troublesome than with electrospray ionization. Using dedicated sample preparation techniques and carefully optimized instrumental parameters, a number of biomolecule assemblies were successfully analyzed. For complexes dissociating under MALDI conditions, covalent stabilization with chemical cross-linking is a suitable alternative. Indirect methods allow the detection of noncovalent assemblies by monitoring the fading of binding partners or altered H/D exchange patterns.

Epitope mapping by proteolysis of antigen-antibody complexes

The ability to accurately characterize an epitope on an antigen is essential to understand the pathogenesis of an infectious material, and for the design and development of drugs and vaccines. Emergence of a new contagious microbial or viral variant necessitates the need for robust identification and characterization of the antigenic determinant. Recent advances have made mass spectrometry (MS) a robust and sensitive analytical tool with high mass accuracy. The use of MS to characterize peptides and proteins has gained popularity in the research arena involving protein-protein interactions. Combining the modern mass spectrometric principles of protein-protein interaction studies with the classical use of limited proteolysis, a linear epitope on a peptide or a protein antigen can be accurately mapped in a short time, compared with other traditional techniques available for epitope mapping. Additionally, complete MS analyses can be achieved with very little sample consumption. Here we discuss the overall approach to characterize the detailed interaction between a linear antigen (either a peptide or a protein antigen) and its corresponding monoclonal antibody by using MS. The steps involved in epitope excision, epitope extraction, and indirect immunosorption are outlined thoroughly. Conditions required for MS analysis using either matrix assisted laser desorption ionization (MALDI) or electrospray ionization (ESI) sources are summarized, with special emphasis on the experimental protocols.

Epitope mapping by differential chemical modification of antigens

Matrix-assisted laser desorption ionization or electrospray ionization mass spectrometry combined with differential chemical modification have proven to be versatile tools for epitope mapping as well as for studying diverse protein-protein and protein-ligand interactions. Characterization of a discontinuous or a conformational epitope on an antigen demands the ability to map the three-dimensional protein surface along with the interface of two interacting proteins. Classical methods of differentially derivatizing amino acid residues have been successfully merged with highly sensitive and highly accurate mass spectrometric techniques to rapidly profile the three-dimensional protein surface and determine the surface accessibility of specific amino acid residues. Here we discuss the use of mass spectrometry to characterize discontinuous or conformational epitopes by studying antigen-antibody interactions. The steps involved in epitope mapping approaches using differential chemical modification and H/D exchange on the antigen are discussed in detail, with particular emphasis on the experimental protocols.

Structural elucidation of critical residues involved in binding of human monoclonal antibodies to hepatitis C virus E2 envelope glycoprotein

Human monoclonal antibodies derived from B cells of HCV-infected individuals provide information on the immune response to native HCV envelope proteins as they are recognized during infection. Monoclonal antibodies have been useful in the determination of the function and structure of specific immunogenic domains of proteins and should also be useful for the structure/function characterization of HCV E1 and E2 envelope glycoproteins. The HCV E2 envelope glycoprotein has at least three immunodistinctive conformation domains, designated A, B, and C. Conformational epitopes within domain B and C are neutralizing antibody targets on HCV pseudoparticles as well as from infectious cell culture virus. In this study, a combination of differential surface modification and mass spectrometric limited proteolysis followed by alanine mutagenesis was used to provide insight into potential conformational changes within the E2 protein upon antibody binding. The arginine guanidine groups in the E2 protein were modified with CHD in both the affinity bound and free states followed by mass spectrometric analysis, and the regions showing protection upon antibody binding were identified. This protection can arise by direct contact between the residues and the monoclonal antibody, or by antibody-induced conformational changes. Based on the mass spectrometric data, site-directed mutagenesis experiments were performed which clearly identified additional amino acid residues on E2 distant from the site of antibody interaction, whose change to alanine inhibited antibody recognition by inducing conformational changes within the E2 protein.

Functionalized magnetic micro- and nanoparticles: Optimization and application to μ-chip tryptic digestion

The preparation of an easily replaceable protease microreactor for micro-chip application is described. Magnetic particles coated with poly(N-isopropylacrylamide), polystyrene, poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate), poly(glycidyl methacrylate), [(2-amino-ethyl)hydroxymethylen]biphosphonic acid, or alginic acid with immobilized trypsin were utilized for heterogeneous digestion. The properties were optimized, with the constraint of allowing immobilization in a microchannel by a magnetic field gradient. To obtain the highest digestion efficiency, sub-micrometer spheres were organized by an inhomogeneous external magnetic field perpendicularly to the direction of the channel. Kinetic parameters of the enzyme reactor immobilized in micro-chip capillary (micro-chip immobilized magnetic enzyme reactor (IMER)) were determined. The capability of the proteolytic reactor was demonstrated by five model (glyco)proteins ranging in molecular mass from 4.3 to 150 kDa. Digestion efficiency of proteins in various conformations was investigated using SDS-PAGE, HPCE, RP-HPLC, and MS. The compatibility of the micro-chip IMER system with total and limited proteolysis of high-molecular-weight (glyco)proteins was confirmed. It opens the route to automated, high-throughput proteomic micro-chip devices.

Absolute quantitation of cancer-related proteins using an MS-based peptide chip

New technologies are needed that can diagnose cancer more rapidly and accurately. These technologies must also have the ability to identify the particular cellular abnormalities contributing to the malignancy, thus directing the appropriate treatments. Such technologies should permit absolute quantitation of specific tumor biomarkers and their level of posttranslational modifications. Quantitative molecular profiling of cancer signaling networks would provide a more detailed understanding of the contribution of protein expression and posttranslational modification levels to tumorigenesis. We have developed a unique approach for absolute quantitation of protein expression that integrates affinity capture of proteolytic peptides with mass spectrometry and thus provides detection, identification, and quantitation of their cognate proteins. We have previously shown the high sensitivity and specificity of this approach. Here we demonstrate the absolute quantitation of a model peptide using our technology. We have used this approach to capture epitope-containing peptides from proteolytically digested target proteins, including p53, epidermal growth factor receptor (EGFR), and prostate-specific antigen (PSA). Our technology can easily be extended to the absolute quantitation of protein modification levels, in addition to the determination of protein expression levels, and can be readily adapted for use in a microarray format. This method offers an improved approach to protein chip technology that should prove useful for clinical diagnosis and drug development applications.

Development of a protein chip: a MS-based method for quantitation of protein expression and modification levels using an immunoaffinity approach

Protein chip technology permits analysis of the expression and modification status of numerous targeted proteins within a single experiment, mainly through the use of antibody-based microarrays. Despite recent improvements in these protein chips, their applications are still limited for a variety of reasons, which include technical challenges in fabrication of the antibody chips as well as the very low specificity achieved by current detection methods. We have developed a unique approach for relative and/or absolute quantitation of protein expression and modification based on the capture of epitope peptides on affinity beads, which can be used to develop a mass-spectrometry-based protein chip technology. This new method, which utilizes antibodies immobilized on beads for the capture of target peptides, instead of proteins, eliminates many of the problems previously associated with protein chips. We present here several proof-of-principle experiments examining model peptides by this technique. These experiments show that the method is capable of (i). detecting peptides bound to a single antibody bead, (ii). detecting peptides at low (fmol) levels, (iii). producing MS/MS data of suitable quality for protein identification via database searching or de novo sequencing, (iv). quantitating peptides affinity-bound to antibody beads, (v). specifically detecting target peptides in complex mixtures over wide dynamic ranges, and (vi) is compatible with a microarray format for high-throughput analysis. Because our novel method uses antibody beads instead of a derivatized capture surface, and peptides instead of proteins for affinity capture, it can overcome many of the pitfalls of previous protein chip fabrications. Therefore, this method offers an improved approach to protein chip technology that should prove useful for diagnostics and drug development applications.

Rapid and sensitive identification of epitope-containing peptides by direct matrix-assisted laser desorption/ionization tandem mass spectrometry of peptides affinity-bound to antibody beads

A method has been developed for rapid and sensitive identification of epitope-containing peptides, based on direct MALDI-MS/MS analysis of epitope-containing peptides affinity bound to affinity beads. This technique provides sequence information of the epitope that allows unambiguous identification of the epitope either by database searching or de novo sequencing. With MALDI-MS, affinity beads with bound peptides can be placed directly on the MALDI target and analyzed. Coupling a MALDI source to an orthogonal injection quadrupole time-of-flight (QqTOF) mass spectrometer allows direct sequencing of the bound peptides. In contrast to ESI-MS/MS, elution of the affinity-bound peptides followed by additional concentration and purification steps is not required, thus reducing the potential for sample loss. Direct mass spectrometric sequencing of affinity-bound peptides eliminates the need for chemical or enzymatic sequencing. Other advantages of this direct MALDI-MS/MS analysis of epitope-containing peptides bound to the affinity beads include its sensitivity (femtomole levels) and speed. In addition, direct analysis of peptides on affinity beads does not adversely affect the high mass accuracy of a QqTOF, and database searching can be performed on the MS/MS spectra obtained. In proof-of-principle experiments, this method has been demonstrated on beads containing immobilized antibodies against phosphotyrosine, the c-myc epitope tag, as well as immobilized avidin. Furthermore, de novo sequencing of epitope-containing peptides is demonstrated. The first application of this method was with anti-FLAG-tag affinity beads, where direct MALDI MS/MS was used to determine an unexpected enzymatic cleavage site on a growth factor protein.

Mass spectrometry-based clinical proteomics

In recent years, mass spectrometry (MS) has been recognized as a 'Gold Standard' tool for the identification and analysis of individual proteins in expression proteomics studies. Moreover, MS has proven useful for the analysis of nucleic acids for single nucleotide polymorphism (SNP) genotyping purposes. With the increased usage of MS as a standard tool for life science applications and the advancement of MS instrumentation, sample preparation and bioinformatics, MS technology has entered novel screening and discovery application areas that are beyond the traditional protein identification and characterization applications. The areas of clinical diagnostics and predictive medicine are just two prime examples of these fields. Predictive markers or biomarkers for early diagnosis of diseases are of growing importance for the human healthcare community. The goal of using MS in clinical proteomics is to generate protein profiles (mass to charge [m/z] ratio versus signal intensity) from readily available body fluids like serum, saliva and urine to detect changes in protein levels that reflect changes in the disease states. Whereas the results originating from individual protein markers may be intriguing, data resulting from the analysis of complex, multiple biomarker patterns may be unequivocal. These biomarker patterns are hidden in complex mass spectra and are not always obvious to the human eye. Sophisticated bioinformatics algorithms have to be applied to determine these unique biomarker patterns. Here, we review the latest developments concerning the use of MS for the discovery of biomarker patterns and for the identification of individual biomarkers in the field of clinical proteomics applications.