An eight-year clinical evaluation of filled and unfilled one-bottle dental adhesives

Eight-year clinical evaluation of two types of resin composite in non-carious cervical lesions

OBJECTIVES

In this clinical study, the 8-year clinical performances of a flowable resin composite was compared with that of a conventional resin composite.

MATERIALS AND METHODS

Ninety non-carious cervical lesions (NCCLs) in 19 participants were involved in this trial. NCCLs were restored with a flowable composite (Clearfil Flow FX: FX, Kuraray Noritake, Japan) or a conventional resin composite (Clearfil AP-X: AP) in conjunction with a one-step self-etch adhesive (Clearfil S3 Bond). Each participant had both types of resin composite restorations that were randomly allocated. The restorations were evaluated at baseline and annually up to 8 years using modified USPHS criteria. The data were statistically analyzed using the Fisher's exact test, Kaplan-Meier method, and a multivariate Cox-regression with frailty models (p < 0.05).

RESULTS

The 8-year participant recall rate was 95%. One hundred percent retention was recorded for AP, whereas four out of 46 restorations were lost for FX during the 8 years. The incidence of marginal staining increased over time regardless of the type of resin composite, showing 48% for AP and 57% for FX after 8 years. Wear of the resin composite occurred only for the flowable material and there was a significant difference between the types of resin composite (p = 0.024). Overall survival rates at 8 years for AP and FX were 98% and 82% respectively (p = 0.110).

CONCLUSIONS

The flowable resin composite presented lower wear resistance and showed a lower survival rate compared with the conventional composite after eight years of clinical service.

CLINICAL RELEVANCE

Flowable resin composites may show greater wear after long-term clinical service.

TRIAL REGISTRATION NUMBER

UMIN000028745, Date of registration: August 19, 2017.

Clinical Performance of Filled/Nanofilled Versus Nonfilled Adhesive Systems in Noncarious Cervical Lesions: A Systematic Review and Meta-analysis

CLINICAL RELEVANCE

The use of filled adhesive systems does not influence the clinical performance of the adhesive restoration in noncarious cervical lesions.

SUMMARY

Does the Type of Solvent in Dental Adhesives Influence the Clinical Performance of Composite Restorations Placed in Noncarious Cervical Lesions? A Systematic Review and Meta-analysis

CLINICAL RELEVANCE

According to the clinical and scientific evidence presented in this systematic review and meta-analysis, dental adhesives containing either organic solvent (acetone or alcohol) can be used to achieve similar clinical performance and longevity of composite restorations.

SUMMARY

Objectives: This systematic review and meta-analysis compared the clinical performance and survival rates of composite restorations placed in noncarious cervical lesions (NCCLs) using dental adhesives containing acetone or alcohol-based solvents.Methods and Materials: PubMed, Scopus, Web of Science, Virtual Health Library (VHL) LILACS, Cochrane Library, OpenGrey, Clinical Trials, and Rebec were searched. MeSH terms, supplementary concepts, synonyms, and free keywords were used in the search strategy. All references were crosschecked by two independent investigators following the PICOS strategy (population, NCCLs; intervention, acetone-based bonding agent; comparison, alcohol-based bonding agent; outcome, clinical evaluation parameters and survival rates; study design, randomized controlled clinical trials). Cochrane Collaboration's tool was used to assess risk of bias, and two distinct meta-analyses were performed using the RevMan software. The prevalence of success and the total number of restorations for each group (acetone- or alcohol-based) were used to calculate the risk difference at a confidence interval of 95%. Random-effects models were applied, and heterogeneity was assessed using the I2 index in the pooled and subgrouped meta-analyses. The certainty of evidence was evaluated through the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) approach.Results: A total of 7876 studies were retrieved, from which 27 studies were selected for the systematic review. Ten studies were classified as "low risk of bias" and included in the meta-analyses. Overall heterogeneity was not significant (I2 = 0.00%). The clinical performance of restorations placed with bonding agents based on both solvents for each of the available parameters presented no statistical significance for any of the meta-analyses (p>0.05).Conclusion: Scientific evidence suggests composite restorations placed with acetone or alcohol-based dental adhesives present similar clinical performance and survival rates in NCCLs.

Comparison between Shear Bond Strength of Er:YAG and Er,Cr:YSGG Lasers-Assisted Dentinal Adhesion of Self-Adhering Resin Composite: An Ex Vivo Study

(1) Background: Bonding composite to tooth structure is still evolving with a substitute for phosphoric acid being the main challenge. Lately, a self-adhering composite (SAC) was developed, promising to simplify bonding to tooth structure. Unfortunately, retention especially to dentin, was not as good as the gold standard three steps bonding system. During the last 2 decades, lasers were used to enhance shear bond strength of composite to tooth structure. However, the literature provided limited information regarding laser efficiency in the immediate, as well as the long term, adhesion success of SACs to dentin. The purpose of our study was to define the optimal irradiation conditions to improve the adhesion of self-adhering flowable resin composite to dentin exposed to Er:YAG and Er,Cr:YSGG laser irradiation. (2) Methods: Seventy-two freshly extracted human third molars, prepared to have flat dentinal surfaces, were randomly divided into three groups (n = 24) including a control group (Group 1) in which dentin was left without laser irradiation. The other two groups (Group 2 and 3) received standardized irradiation at a speed of 1 mm/second with Er:YAG (60 mJ; SSP mode = 50 μs; 10 Hz; fluency of 9.4 J/cm²; beam diameter: 0.9 mm; air 6 mL/min; and water 4 mL/min), and Er,Cr:YSGG: 1.5 W; fluency of 17.8 J/cm²; turbo handpiece with MX5 short insert; 20 Hz under air/water spray (65% air, 55% water). Self-adhering flowable resin was applied to dentin in all groups. Half of the specimens were stored in water for 24 h while the other half underwent 3000 thermal cycles. Later, all specimens received a shear bond strength test. Fracture observation was done first under a stereomicroscope then by using a scanning electron microscope. (3) Results: The mean values of shear bond strength for both laser-treated dentin groups (Er:YAG laser: 13.10 ± 1.291, and Er,Cr:YSGG: 14.04 ± 5.233) were higher than in the control group 1 (8.355 ± 2.297) before thermocycling. After thermocycling, shear bond strength decreased in all groups as follows: 10.03 ± 1.503, 10.53 ± 2.631, and 02.75 ± 1.583 for Er:YAG, Er,Cr:YSGG, and nonirradiated dentin, respectively. Shear bond strength values showed a significant difference between the control group (Group 1) and both lasers groups (Group 2 and 3). Statistical analysis of stereomicroscope observation revealed no significant difference between laser irradiation and failure mode (p < 0.136). SEM observation of the dentin surface in both laser-irradiated groups showed opened tubules, absence of smear layer as well as an increase of resin infiltration into dentinal tubules. (4) Conclusion: Er:YAG and Er,Cr:YSGG lasers enhance self-adhering flowable resin shear bond strength values and improve its longevity by eliminating the smear layer, opening dentinal tubules and increasing resin infiltration into the microstructure.

Randomized clinical trial of four adhesion strategies: A 42 month study

Context

The adhesives clinical effectiveness has been extensively reported for noncarious cervical lesions (NCCLs). However, there is a lack of information about the adhesive systems strategies and their effect on NCCL restoration longevity.

Aims

This study aims to evaluate a 42-month performance of four dentin adhesive systems used for the restorative treatment of NCCLs.

Settings and Design

NCCLs were randomly divided into four groups: (1) Scotchbond multi-purpose (MP); 2: Single bond plus (SB); 3: Scotchbond SE (SE); and 4: Easy bond (EB).

Subjects and Methods

NCCLs (125) were randomly distributed: (1) MP; (2) SB; (3) SE; and (4) EB and were restored with a nanofilled resin-composite, evaluated along 18-36-42 months.

Statistical Analysis Used

Kruskal-Wallis test: Comparison among the adhesive systems in each period. Friedman analysis: Comparison along the periods. Kaplan-Meier: Survival analysis.

Results

Baseline and 42-month retention (RET) rates (%) were 100/100 for MP; 100/94.74 for SB; 100/87.5 for SE; and 100/100 for EB. The cumulative failure percentage was 9.52% for MP, 9.52% SB, 15.8% SE, and 10% EB. Restorations survival was not dependent on the used adhesive type. Marginal adaptation (MA) was similar to each group, but EB presented noticeable marginal deterioration. Wear was noticed in the 3-step etch-and-rinse (MP) restorations evaluated after 42 months. For the EB, baseline and 18-month wear evaluation were statistically similar. After 36 and 42 months, wear was also similar for EB.

Conclusions

Adhesive systems showed similar performance within most important adhesive bonding efficiency achievement parameters: RET, MA, interfacial staining, recurrent caries, and postoperative sensitivity evaluated during 42 months.

Bioactive Dental Composites and Bonding Agents Having Remineralizing and Antibacterial Characteristics

Current dental restorative materials are typically inert and replace missing tooth structures. This article reviews efforts in the development of a new generation of bioactive materials designed to not only replace the missing tooth volume but also possess therapeutic functions. Composites and bonding agents with remineralizing and antibacterial characteristics have shown promise in replacing lost minerals, inhibiting recurrent caries, neutralizing acids, repelling proteins, and suppressing biofilms and acid production. Furthermore, they have demonstrated a low cytotoxicity similar to current resins, with additional benefits to protect the dental pulp and promote tertiary dentin formation. This new class of bioactive materials shows promise in reversing lesions and inhibiting caries.

Compliance of Randomized Clinical Trials in Noncarious Cervical Lesions With the CONSORT Statement: A Systematic Review of Methodology

The literature was reviewed to evaluate the compliance of randomized clinical trials (RCTs) with the CONsolidated Standards of Reporting Trials (CONSORT ) and the risk of bias of these studies through the Cochrane Collaboration risk of bias tool (CCRT). RCTs were searched at Cochrane Library, PubMed, and other electronic databases to find studies about adhesive systems for cervical lesions. The compliance of the articles with CONSORT was evaluated using the following scale: 0 = no description, 1 = poor description, and 2 = adequate description. Descriptive analyses about the number of studies by journal, follow-up period, country, and quality assessments were performed with CCRT for assessing risk of bias in RCTs. One hundred thirty-eight RCTs were left for assessment. More than 30% of the studies received scores of 0 or 1. Flow chart, effect size, allocation concealment, and sample size were more critical items, with 80% receiving a score of 0. The overall CONSORT score for the included studies was 15.0 ± 4.8 points, which represents 46.9% of the maximum CONSORT score. A significant difference among countries was observed (p&lt;0.001), as well as range of year (p&lt;0.001). Only 4.3% of the studies were judged as at low risk; 36.2% were classified as having unclear risk and 59.4% as having high risk of bias. The adherence of RCTs evaluating adhesive systems to the CONSORT is low with unclear/high risk of bias.

Evaluation of Microleakage with Total Etch, Self Etch and Universal Adhesive Systems in Class V Restorations: An In vitro Study

INTRODUCTION

Adhesive dentistry is overwhelmingly evolving with respect to the dental surgeon's and patient's perspective. Embracing the concept of minimally invasive dentistry which follows minimum intervention performed to produce good adhesion and tooth coloured restoration, in turn makes the newer generation bonding agents more acceptable and appropriate withstanding the demand for stable restoration.

AIM

To study and compare the extent of microleakage between tooth and restoration interface in class V composite resin restorations applying one Total Etch (Adper^TM single bond), two Self Etch (Adper^TM SE Plus, Adper^TM Easy One) and Universal bonding agents using dye penetration method.

MATERIALS AND METHODS

A total of 120 freshly orthodontically extracted human maxillary and mandibular premolars were included in the study. Class V cavities were prepared with a cylindrical diamond bur on the facial surface of each tooth, having approximate dimensions of 3 mm × 2.5 mm × 1.5 mm. Teeth were divided into four groups (30 in each group). Group A Adper^TM single bond 2 (3M ESPE), Group B Adper^TM SE Plus (3M ESPE), Group C Adper^TM Easy One (3M ESPE), Group D Adper^TM Single Bond Universal (3M ESPE) bonding agents were applied as per the manufacturer's instructions and the cavities were then restored with nanohybrid composite resin (Tetric N Ceram Ivoclar Vivadent). Teeth were then thermocycled for 200 cycles at 5°-55°C with 60 seconds of dwell time. Specimens were subjected to a dye leakage test. Microleakage was evaluated using a stereomicroscope. Data was analysed using Kruskal- Wallis, Dunn and Mann-Whitney test to assess the difference in microleakage among various adhesives.

RESULTS

The present study revealed that the microleakage was more at the gingival margin when compared with occlusal and this was found to be statistically significant. At the occlusal margin statistical significant difference was found only between Adper^TM Easy one and Adper^TM SE Plus, on the other hand at gingival margin no statistical significant difference was found.

CONCLUSION

One step self etch agents showed less microleakage than total etches and universal adhesive at occlusal margin. Higher degree of microleakage was observed at gingival margin compared to occlusal margin.

Primer containing dimethylaminododecyl methacrylate kills bacteria impregnated in human dentin blocks

Antibacterial dimethylaminododecyl methacrylate (DMADDM) was recently synthesized. The objectives of this study were to: (1) investigate antibacterial activity of DMADDM-containing primer on Streptococcus mutans impregnated into dentin blocks for the first time, and (2) compare the antibacterial efficacy of DMADDM with a previous quaternary ammonium dimethacrylate (QADM). Scotchbond Multi-Purpose (SBMP) bonding agent was used. DMADDM and QADM were mixed into SBMP primer. Six primers were tested: SBMP control primer P, P+2.5% DMADDM, P+5% DMADDM, P+7.5% DMADDM, P+10% DMADDM, and P+10% QADM. S. mutans were impregnated into human dentin blocks, and each primer was applied to dentin to test its ability to kill bacteria in dentinal tubules. Bacteria in dentin were collected via a sonication method, and the colony-forming units (CFU) and inhibition zones were measured. The bacterial inhibition zone of P+10% DMADDM was 10 times that of control primer (P<0.05). CFU in dentin with P+10% DMADDM was reduced by three orders of magnitude, compared with control. DMADDM had a much stronger antibacterial effect than QADM, and antibacterial efficacy increased with increasing DMADDM concentration. Dentin shear bond strengths were similar among all groups (P>0.1). In conclusion, antibacterial DMADDM-containing primer was validated to kill bacteria inside dentin blocks, possessing a much stronger antibacterial potency than the previous QADM. DMADDM-containing bonding agent was effective in eradicating bacteria in dentin, and its efficacy was directly proportional to DMADDM mass fraction. Therefore, DMADDM may be promising for use in bonding agents as well as in other restorative and preventive materials to inhibit bacteria.

Randomized clinical trial of four adhesion strategies in posterior restorations-18-month results

PURPOSE

To evaluate the 18-month clinical performance of four adhesive strategies in posterior composite restorations placed in private practice.

MATERIALS AND METHODS

Upon approval by an institutional review board, 144 restorations were inserted in 45 subjects (average age = 32.6) to treat caries lesions or to replace existing restorations in vital molars and premolars. The adhesives OptiBond FL (three-step etch-and-rinse), OptiBond SOLO Plus (two-step etch-and-rinse), OptiBond XTR (two-step self-etch), and OptiBond All-in One (one-step self-etch) were applied as per manufacturer's (Kerr Co.) instructions followed by a nanofilled resin composite (Filtek Z350XT, 3M ESPE) under rubber dam isolation. Restorations were evaluated at baseline and at 18 months using United States Public Health Service (USPHS)-modified criteria and high-resolution digital photographs. Statistical analyses included the McNemar and the Mann-Whitney non-parametric tests (p < 0.05).

RESULTS

A total of 137 restorations were evaluated after 18 months. The number of alfa ratings did not change significantly from baseline to 18 months for any of the adhesion strategies. When the 18-month evaluation criteria were pooled by pairs of adhesives, none of the adhesives resulted in a significantly different number of alfa ratings for any of the criteria compared with the other adhesives.

CONCLUSION

Bonding strategy did not influence the clinical performance of posterior composite restorations under the clinical conditions used in this study.

CLINICAL SIGNIFICANCE

When used in ideal clinical conditions, the composition of current dentin adhesives may be more clinically relevant than their adhesion strategy.

Antibacterial activity and ion release of bonding agent containing amorphous calcium phosphate nanoparticles

OBJECTIVE

Recurrent caries at the margins is a primary reason for restoration failure. The objectives of this study were to develop bonding agent with the double benefits of antibacterial and remineralizing capabilities, to investigate the effects of NACP filler level and solution pH on Ca and P ion release from adhesive, and to examine the antibacterial and dentin bond properties.

METHODS

Nanoparticles of amorphous calcium phosphate (NACP) and a quaternary ammonium monomer (dimethylaminododecyl methacrylate, DMADDM) were synthesized. Scotchbond Multi-Purpose (SBMP) primer and adhesive served as control. DMADDM was incorporated into primer and adhesive at 5% by mass. NACP was incorporated into adhesive at filler mass fractions of 10%, 20%, 30% and 40%. A dental plaque microcosm biofilm model was used to test the antibacterial bonding agents. Calcium (Ca) and phosphate (P) ion releases from the cured adhesive samples were measured vs. filler level and solution pH of 7, 5.5 and 4.

RESULTS

Adding 5% DMADDM and 10-40% NACP into bonding agent, and water-aging for 28 days, did not affect dentin bond strength, compared to SBMP control at 1 day (p>0.1). Adding DMADDM into bonding agent substantially decreased the biofilm metabolic activity and lactic acid production. Total microorganisms, total streptococci, and mutans streptococci were greatly reduced for bonding agents containing DMADDM. Increasing NACP filler level from 10% to 40% in adhesive increased the Ca and P ion release by an order of magnitude. Decreasing solution pH from 7 to 4 increased the ion release from adhesive by 6-10 folds.

SIGNIFICANCE

Bonding agents containing antibacterial DMADDM and remineralizer NACP were formulated to have Ca and P ion release, which increased with NACP filler level from 10% to 40% in adhesive. NACP adhesive was "smart" and dramatically increased the ion release at cariogenic pH 4, when these ions would be most-needed to inhibit caries. Therefore, bonding agent containing DMADDM and NACP may be promising to inhibit biofilms and remineralize tooth lesions thereby increasing the restoration longevity.

Retention of tooth-colored restorations in non-carious cervical lesions--a systematic review

OBJECTIVES

The aim of this review was to assess the effect of different adhesive systems and tooth preparation on the retention of tooth-colored restorative materials placed in non-carious cervical lesions (NCCLs).

METHODS

Randomized clinical trials with a minimum of 3 years of follow-up that evaluated the effectiveness of tooth-colored materials, adhesive systems, and preparation techniques for the restoration of NCCLs were selected. The Cochrane Central Register of Controlled Trials (CENTRAL), EMBASE (OVID), the Latin American and Caribbean Health Sciences Literature database (LILACS), and Medline (OVID) electronic databases were searched from 1990 to 2013.

RESULTS

Twenty-seven randomized clinical trials were included and reviewed. Meta-analysis was used to determine the relative risk of loss of tooth-colored NCCL restorations between different categories of adhesive systems. The effect of tooth preparation could not be similarly analyzed.

CONCLUSION

The current best evidence indicates that a glass ionomer cement has a significantly lower risk of loss of a NCCL restoration compared to either a three-step etch-and-rinse or a two-step etch-and-rinse adhesive system; a three-step etch-and-rinse adhesive system has a significantly lower risk of loss of a NCCL restoration compared to a two-step etch-and-rinse adhesive system. No significant difference could be observed in the risk of loss of a tooth-colored NCCL restoration between a three-step etch-and-rinse adhesive system and either a two-step self-etch or a one-step self-etch adhesive system.

Effect of charge density of bonding agent containing a new quaternary ammonium methacrylate on antibacterial and bonding properties

OBJECTIVE

Quaternary amine charge density is important because when the negatively charged bacteria contact the positive quaternary amine charge, the electric balance is disturbed and the bacterium could be disrupted. There has been no report on the effects of charge density on the antibacterial efficacy of dental bonding agents. The objective of this study was to synthesize a new quaternary ammonium methacrylate, and investigate the effects of charge density of bonding agent on bacteria early-attachment, biofilm colony-forming units (CFU) and dentin bond strength.

METHODS

Dimethylaminododecyl methacrylate (DMAHDM) with an alkyl chain length of 16 was synthesized and mixed into Scotchbond Multi-Purpose adhesive and primer (SBMP) at mass fractions of 0%, 2.5%, 5%, 7.5%, and 10%. A microtensile dentin bond test was performed. The density of quaternary ammonium groups was measured using a fluorescein dye method. Streptococcus mutans (S. mutans) early-attachment was examined at 4 h, and biofilm colony-forming units (CFU) were measured at 2 days.

RESULTS

All groups had similar microtensile bonding strengths (mean±sd; n=40) of about 60 MPa (p>0.1). Quaternary amine charge density of bonding agents monotonically increased with increasing DMAHDM mass fraction. Bacteria early-attachment coverage greatly decreased with increasing DMAHDM content in the resin. Biofilm CFU at 10% DMAHDM was reduced by more than 4 log, compared to SBMP control. Charge density of bonding agent was inversely proportional to bacteria early-attachment coverage and biofilm CFU.

SIGNIFICANCE

Increasing the quaternary amine charge density of dentin bonding agent resin was shown to greatly reduce S. mutans attachment and decrease biofilm CFU by four orders of magnitude, without compromising the dentin bond strength. The new DMAHDM is promising for use in bonding agents and other antibacterial restorative materials to inhibit caries.

Clinical evaluation of resin-based composites in posterior restorations: a 3-year study

OBJECTIVES

The aim of this study was to evaluate the clinical performance of a nanohybrid and a microhybrid composite in class I and II restorations after 3 years.

SUBJECTS AND METHODS

A total of 82 class I and class II restorations were performed in 31 patients (10 males and 21 females) using Grandio and QuiXfil with self-etch adhesives (Futurabond and Xeno III). The restorations were clinically evaluated by 2 operators 1 week after placement (baseline) and at 6 months and 1, 2, and 3 years using modified United States Public Health Service (USPHS) criteria. At the 3-year follow-up, 62 class I and class II cavities were reevaluated in 23 patients (7 males and 16 females). Statistical analysis was performed using Pearson's χ(2) and Fisher's exact tests (p < 0.05).

RESULTS

At the 6-month follow-up, all restorations received Alfa scores with respect to each evaluation criterion. At the 1-year follow-up, 2 QuiXfil restorations had to be replaced and Grandio restorations started to deteriorate in terms of marginal adaptation. At the end of 2 years, 9 Grandio restorations showed significant deterioration of the surface properties, demonstrating Bravo scores. At the end of 3 years, no significant differences were observed regarding color match, marginal adaptation, secondary caries, marginal discoloration, and anatomic form loss between the evaluated materials in 25 class I and 37 class II restorations. At the 3-year follow-up, Grandio restorations had 21% Bravo scores and showed significant deterioration of the surface properties, which were still clinically acceptable according to USPHS criteria. Three QuiXfil and 1 Grandio restorations were replaced because of secondary caries and loss of retention.

CONCLUSIONS

Both the nanohybrid (Grandio) and the microhybrid (QuiXfil) composites were clinically functional after 3 years.

Effect of salivary pellicle on antibacterial activity of novel antibacterial dental adhesives using a dental plaque microcosm biofilm model

OBJECTIVES

Antibacterial primer and adhesive are promising to inhibit biofilms and caries. Since restorations in vivo are exposed to saliva, one concern is the attenuation of antibacterial activity due to salivary pellicles. The objective of this study was to investigate the effects of salivary pellicles on bonding agents containing a new monomer dimethylaminododecyl methacrylate (DMADDM) or nanoparticles of silver (NAg) against biofilms for the first time.

METHODS

DMADDM and NAg were synthesized and incorporated into Scotchbond Multi-Purpose adhesive and primer. Specimens were either coated or not coated with salivary pellicles. A microcosm biofilm model was used with mixed saliva from ten donors. Two types of culture medium were used: an artificial saliva medium (McBain), and Brain Heart Infusion (BHI) medium without salivary proteins. Metabolic activity, colony-forming units (CFU), and lactic acid production of plaque microcosm biofilms were measured (n=6).

RESULTS

Bonding agents containing DMADDM and NAg greatly inhibited biofilm activities, even with salivary pellicles. When using BHI, the pre-coating of salivary pellicles on resin surfaces significantly decreased the antibacterial effect (p<0.05). When using artificial saliva medium, pre-coating of salivary pellicles on resin did not decrease the antibacterial effect. These results suggest that artificial saliva yielded medium-derived pellicles on resin surfaces, which provided attenuating effects on biofilms similar to salivary pellicles. Compared with the commercial control, the DMADDM-containing bonding agent reduced biofilm CFU by about two orders of magnitude.

SIGNIFICANCE

Novel DMADDM- and NAg-containing bonding agents substantially reduced biofilm growth even with salivary pellicle coating on surfaces, indicating a promising usage in saliva-rich environment. DMADDM and NAg may be useful in a wide range of primers, adhesives and other restoratives to achieve antibacterial and anti-caries capabilities.

Dental plaque microcosm response to bonding agents containing quaternary ammonium methacrylates with different chain lengths and charge densities

OBJECTIVES

Antibacterial bonding agents are promising to combat bacteria and caries at tooth-restoration margins. The objectives of this study were to incorporate new quaternary ammonium methacrylates (QAMs) to bonding agent and determine the effects of alkyl chain length (CL) and quaternary amine charge density on dental plaque microcosm bacteria response for the first time.

METHODS

Six QAMs were synthesized with CL=3, 6, 9, 12, 16, 18. Each QAM was incorporated into Scotchbond multi-purpose (SBMP). To determine the charge density effect, dimethylaminododecyl methacrylate (DMAHDM, CL=16) was mixed into SBMP at mass fraction=0%, 2.5%, 5%, 7.5%, 10%. Charge density was measured using a fluorescein dye method. Dental plaque microcosm using saliva from ten donors was tested. Bacteria were inoculated on resins. Early-attachment was tested at 4h. Biofilm colony-forming units (CFU) were measured at 2 days.

RESULTS

Incorporating QAMs into SBMP reduced bacteria early-attachment. Microcosm biofilm CFU for CL=16 was 4 log lower than SBMP control. Charge density of bonding agent increased with DMAHDM content. Bacteria early-attachment decreased with increasing charge density. Biofilm CFU at 10% DMAHDM was reduced by 4 log. The killing effect was similarly-strong against total microorganisms, total streptococci, and mutans streptococci.

CONCLUSIONS

Increasing alkyl chain length and charge density of bonding agent was shown for the first time to decrease microcosm bacteria attachment and reduce biofilm CFU by 4 orders of magnitude. Novel antibacterial resins with tailored chain length and charge density are promising for wide applications in bonding, cements, sealants and composites to inhibit biofilms and caries.

Synthesis of new antibacterial quaternary ammonium monomer for incorporation into CaP nanocomposite

OBJECTIVES

Composites are the principal material for tooth cavity restorations due to their esthetics and direct-filling capabilities. However, composites accumulate biofilms in vivo, and secondary caries due to biofilm acids is the main cause of restoration failure. The objectives of this study were to: (1) synthesize new antibacterial monomers and (2) develop nanocomposite containing nanoparticles of amorphous calcium phosphate (NACP) and antibacterial monomer.

METHODS

Two new antibacterial monomers were synthesized: dimethylaminohexane methacrylate (DMAHM) with a carbon chain length of 6, and dimethylaminododecyl methacrylate (DMADDM) with a chain length of 12. A spray-drying technique was used to make NACP. DMADDM was incorporated into NACP nanocomposite at mass fractions of 0%, 0.75%, 1.5%, 2.25% and 3%. A flexural test was used to measure composite strength and elastic modulus. A dental plaque microcosm biofilm model with human saliva as inoculum was used to measure viability, metabolic activity, and lactic acid production of biofilms on composites.

RESULTS

The new DMAHM was more potent than a previous quaternary ammonium dimethacrylate (QADM). DMADDM was much more strongly antibacterial than DMAHM. The new DMADDM-NACP nanocomposite had strength similar to that of composite control (p>0.1). At 3% DMADDM in the composite, the metabolic activity of adherent biofilms was reduced to 5% of that on composite control. Lactic acid production by biofilms on composite containing 3% DMADDM was reduced to only 1% of that on composite control. Biofilm colony-forming unit (CFU) counts on composite with 3% DMADDM were reduced by 2-3 orders of magnitude.

SIGNIFICANCE

New antibacterial monomers were synthesized, and the carbon chain length had a strong effect on antibacterial efficacy. The new DMADDM-NACP nanocomposite possessed potent anti-biofilm activity without compromising load-bearing properties, and is promising for antibacterial and remineralizing dental restorations to inhibit secondary caries.

Dual antibacterial agents of nano-silver and 12-methacryloyloxydodecylpyridinium bromide in dental adhesive to inhibit caries

Dental resins containing 12-methacryloyloxydodecylpyridinium bromide (MDPB) showed potent antibacterial functions. Recent studies developed antibacterial resins containing nanoparticles of silver (NAg). The objectives of this study were to develop an adhesive containing dual agents of MDPB and NAg for the first time and to investigate the combined effects of antibacterial adhesive and primer on biofilm viability, metabolic activity, lactic acid, dentin bond strength, and fibroblast cytotoxicity. MDPB and NAg were incorporated into Scotchbond Multi-Purpose (SBMP) adhesive "A" and primer "P". Five systems were tested: SBMP adhesive A; A + MDPB; A+NAg; A + MDPB + NAg; P + MDPB + NAg together with A + MDPB + NAg. Dental plaque microcosm biofilms were cultured using mixed saliva from 10 donors. Metabolic activity, colony-forming units, and lactic acid production of biofilms were investigated. Human fibroblast cytotoxicity of bonding agents was determined. MDPB + NAg in adhesive/primer did not compromise dentin bond strength (p > 0.1). MDPB or NAg alone in adhesive substantially reduced the biofilm activities. Dual agents MDPB + NAg in adhesive significantly reduced the biofilm viability compared with each agent alone (p < 0.05). The greatest inhibition of biofilms was achieved when both adhesive and primer contained MDPB + NAg. Fibroblast viability of groups with dual antibacterial agents was similar to control using culture medium without resin eluents (p > 0.1). In conclusion, this study showed for the first time that the antibacterial potency of MDPB adhesive could be substantially enhanced via NAg. Adding MDPB + NAg into both primer and adhesive achieved the strongest antibiofilm efficacy. The dual agent (MDPB + NAg) method could have wide applicability to other adhesives, sealants, cements, and composites to inhibit biofilms and caries.

Effects of antibacterial primers with quaternary ammonium and nano-silver on Streptococcus mutans impregnated in human dentin blocks

OBJECTIVE

Recent studies developed antibacterial bonding agents and composites containing a quaternary ammonium dimethacrylate (QADM) and nanoparticles of silver (NAg). The objectives of this study were to investigate: (1) the effect of antibacterial primers containing QADM and NAg on the inhibition of Streptococcus mutans impregnated into dentin blocks for the first time, and (2) the effect of QADM or NAg alone or in combination, and the effect of NAg mass fraction, on S. mutans viability in dentin.

METHODS

Scotchbond Multi-Purpose (SBMP) bonding agent was used. QADM and NAg were incorporated into SBMP primer. Six primers were tested: SBMP primer control, control+10% QADM (mass%), control+0.05% NAg, control+10% QADM+0.05% NAg, control+0.1% NAg, and control+10% QADM+0.1% NAg. S. mutans were impregnated into dentin blocks, then a primer was applied. The viable colony-forming units (CFU) were then measured by harvesting the bacteria in dentin using a sonication method.

RESULTS

Control+10% QADM+0.1% NAg had bacteria inhibition zone 8-fold that of control (p<0.05). The sonication method successfully harvested bacteria from dentin blocks. Control+10% QADM+0.1% NAg inhibited S. mutans in dentin blocks, reducing the viable CFU in dentin by three orders of magnitude, compared to control dentin without primer. Using QADM+NAg was more effective than QADM alone. Higher NAg content increased the potency. Dentin shear bond strength was similar for all groups (p>0.1).

SIGNIFICANCE

Antibacterial primer with QADM and NAg were shown to inhibit the S. mutans impregnated into dentin blocks for the first time. Bonding agent containing QADM and NAg is promising to eradicate bacteria in tooth cavity and inhibit caries. The QADM and NAg may have applicability to other adhesives, cements, sealants and composites.

Effects of dual antibacterial agents MDPB and nano-silver in primer on microcosm biofilm, cytotoxicity and dentine bond properties

OBJECTIVES

The objective of this study was to investigate the effects of dentine primer containing dual antibacterial agents, namely, 12-methacryloyloxydodecylpyridinium bromide (MDPB) and nanoparticles of silver (NAg), on dentine bond strength, dental plaque microcosm biofilm response, and fibroblast cytotoxicity for the first time.

METHODS

Scotchbond Multi-Purpose (SBMP) was used as the parent bonding agent. Four primers were tested: SBMP primer control (referred to as "P"), P+5% MDPB, P+0.05% NAg, and P+5% MDPB+0.05% NAg. Dentine shear bond strengths were measured using extracted human teeth. Biofilms from the mixed saliva of 10 donors were cultured to investigate metabolic activity, colony-forming units (CFU), and lactic acid production. Human fibroblast cytotoxicity of the four primers was tested in vitro.

RESULTS

Incorporating MDPB and NAg into primer did not reduce dentine bond strength compared to control (p>0.1). SEM revealed well-bonded adhesive-dentine interfaces with numerous resin tags. MDPB or NAg each greatly reduced biofilm viability and acid production, compared to control. Dual agents MDPB+NAg had a much stronger effect than either agent alone (p<0.05), increasing inhibition zone size and reducing metabolic activity, CFU and lactic acid by an order of magnitude, compared to control. There was no difference in cytotoxicity between commercial control and antibacterial primers (p>0.1).

CONCLUSIONS

The method of using dual agents MDPB+NAg in the primer yielded potent antibacterial properties. Hence, this method may be promising to combat residual bacteria in tooth cavity and invading bacteria at the margins. The dual agents MDPB+NAg may have wide applicability to other adhesives, composites, sealants and cements to inhibit biofilms and caries.

Dental primer and adhesive containing a new antibacterial quaternary ammonium monomer dimethylaminododecyl methacrylate

OBJECTIVES

The main reason for restoration failure is secondary caries caused by biofilm acids. Replacing the failed restorations accounts for 50-70% of all operative work. The objectives of this study were to incorporate a new quaternary ammonium monomer (dimethylaminododecyl methacrylate, DMADDM) and nanoparticles of silver (NAg) into a primer and an adhesive, and to investigate their effects on antibacterial and dentin bonding properties.

METHODS

Scotchbond Multi-Purpose (SBMP) served as control. DMADDM was synthesized and incorporated with NAg into primer/adhesive. A dental plaque microcosm biofilm model with human saliva was used to investigate metabolic activity, colony-forming units (CFU), and lactic acid. Dentin shear bond strengths were measured.

RESULTS

Minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of the new DMADDM were orders of magnitude lower than those of a previous quaternary ammonium dimethacrylate (QADM). Uncured primer with DMADDM had much larger inhibition zones than QADM (p<0.05). Cured primer/adhesive with DMADDM-NAg greatly reduced biofilm metabolic activity (p<0.05). Combining DMADDM with NAg in primer/adhesive resulted in less CFU than DMADDM alone (p<0.05). Lactic acid production by biofilms was reduced by 20-fold via DMADDM-NAg, compared to control. Incorporation of DMADDM and NAg into primer/adhesive did not adversely affect dentin bond strength.

CONCLUSIONS

A new antibacterial monomer DMADDM was synthesized and incorporated into primer/adhesive for the first time. The bonding agents are promising to combat residual bacteria in tooth cavity and invading bacteria at tooth-restoration margins to inhibit caries. DMADDM and NAg are promising for use into a wide range of dental adhesive systems and restoratives.

Novel dental adhesive containing antibacterial agents and calcium phosphate nanoparticles

Secondary caries remains the main reason for dental restoration failure. Replacement of failed restorations accounts for 50%-70% of all restorations performed. Antibacterial adhesives could inhibit biofilm acids at tooth-restoration margins, and calcium phosphate (CaP) ions could remineralize tooth lesions. The objectives of this study were to: (1) incorporate nanoparticles of silver (NAg), quaternary ammonium dimethacrylate (QADM), and nanoparticles of amorphous calcium phosphate (NACP) into bonding agent; and (2) investigate their effects on dentin bonding and microcosm biofilms. An experimental primer was made with pyromellitic glycerol dimethacrylate (PMGDM) and 2-hydroxyethyl methacrylate (HEMA). An adhesive was made with bisphenol-A-glycerolate dimethacrylate (BisGMA) and triethylene glycol dimethacrylate (TEGDMA). NAg was incorporated into primer at 0.1 wt %. The adhesive contained 0.1% NAg and 10% QADM, and 0%-40% NACP. Incorporating NAg into primer and NAg-QADM-NACP into adhesive did not adversely affect dentin bond strength (p > 0.1). Scanning electron microscopy showed numerous resin tags, and transmission electron microscopy revealed NAg and NACP in dentinal tubules. Viability of human saliva microcosm biofilms on primer/adhesive/composite disks was substantially reduced via NAg and QADM. Metabolic activity, lactic acid, and colony-forming units of biofilms were much lower on the new bonding agents than control (p < 0.05). In conclusion, novel dental bonding agents containing NAg, QADM, and NACP were developed with the potential to kill residual bacteria in the tooth cavity and inhibit the invading bacteria along tooth-restoration margins, with NACP to remineralize tooth lesions. The novel method of combining antibacterial agents (NAg and QADM) with remineralizing agent (NACP) may have wide applicability to other adhesives for caries inhibition.

Clinical Evaluation of Stress-reducing Direct Composite Restorations in Structurally Compromised Molars: A 2-year Report

Objective

To evaluate the clinical performance of class II large-size direct composite restorations.

Materials and Methods

Fifty (50) patients 18 years or older were included in this clinical trial restoring 75 vital molar teeth with large-size cavities.

Inclusion Criteria

Occlusal extension greater than two-thirds the intercuspal distance and proximal extension greater than half the distance between line angles. Teeth with residual cavity walls less than 1 mm and with one or more cusps involved were excluded. Teeth were randomly divided in three groups. Group 1: Opti-Bond FL; group 2: Scotchbond 1 XT; group 3: PQ1. Total-etching was performed using 35% phosphoric acid followed by the application of 2% chlorhexidine gluconate in the three groups. All teeth were restored using Vit-l-escence microhybrid composite resin. The proximal surface was built up first, followed by dentin and enamel occlusal surface stratification; wedge-shaped increments of composite resin were placed and cured using the UltraLume V curing light through a combination of pulse and progressive curing techniques.

Results

Restorations were evaluated at six-month intervals during the two-year period using a modified US Public Health Service criteria by two independent evaluators precalibrated at 85% reliability. No failures were reported and α scores were recorded for all parameters. Statistical analysis was performed using a χ2 test and the Fisher exact test (χ2=10.6; p=0.001). No teeth exhibited sensitivity in the three groups both at the two-week recall and two-year follow-up.

Influence of activated bleaching on various adhesive restorative systems

STATEMENT OF THE PROBLEM

  When adhesive restorations are used in combination with bleaching in clinical applications, it is generally recommended to wait for a period of time between the two procedures. However, it is not clear if a time interval is necessary between applying the bleaching treatments and the silorane-based restorative system.

PURPOSE

  The purpose of this in vitro study was to determine if activated bleaching affects the bond strength of silorane-based restorative, a newly developed restorative that uses a polymerization system that has been reported to be insensitive to oxygen.

METHODS

  A gel consisting of 38% hydrogen peroxide was applied to ground labial enamel surfaces and activated using a diode laser to bleach the teeth. Then, without waiting for any period of time, four different restorative materials were applied to the bleached enamel surfaces, and these sets were compared with nonbleached control samples. The shear bond strength of the restorative systems to enamel was tested, and data was evaluated using two-way analysis of variance and Tukey HSD tests.

RESULTS

  Significant differences (p<0.05) in shear bond strengths were found among bleached and nonbleached enamel surfaces.

CONCLUSION

  It may be more beneficial to allow a time interval of 2 to 3 weeks between activated hydrogen peroxide bleaching and applying silorane-based composite restoratives or methacrylate-based composites than just applying restorative agents immediately after bleaching. However, further studies are needed to examine the structural effects of activated hydrogen peroxide on enamel.

CLINICAL SIGNIFICANCE

A time interval should be allowed between the application of silorane-based or methacrylate-based restorations and activated hydrogen peroxide bleaching systems.

An in vitro evaluation of microleakage in class V preparations restored with Hybrid versus Silorane composites

Aim:

To compare the difference in microleakage values using conventional and new low-shrink Silorane composites using the dye penetration method.

Background:

With improvement in adhesive technology, problems associated with composites have been largely overcome. However, microleakage due to polymerization shrinkage still remains a challenge. New Silorane-based composites are alleged to have less than 1% polymerization shrinkage, which would potentially decrease the microleakage, and hence, resolve this longstanding issue.

Materials and Methods:

The teeth were randomly divided into three groups (A,B, and C). Group A was restored with conventional composite (Valux^™ Plus), with a total-etch protocol, Group B was restored with conventional composite, with a self-etch protocol, and group C were restored with a silorane-based composite (Filtek TMP90). Thermocycling at 200 cycles between 5 and 55°C ± 2°C with a dwell time of 60 seconds was conducted. The teeth were stained with methylene blue dye and then sectioned and viewed under a dissection microscope, afer which the microleakage was evaluated.

Results:

The interexaminer reliability was evaluated using the kappa score, which was acceptable (61 – 78%). The total-etch group performed statistically and significantly better (P < 0.001) at the occlusal margin and was marginally and statistically significant (P = 0.05) at the gingival margin compared to the self-etch conventional and Silorane groups.

Conclusions:

The Silorane composite did not perform better than the conventional composites, however, it may have its uses and requires further research.

Clinical effectiveness of contemporary dentin bonding agents

Aim:

The purpose of this paper is to review the literature on the clinical effectiveness of contemporary resin-based dentin bonding agents primarily focussing on the longevity of restoration.

Materials and Methods:

The literature published from June 2004 up to September 2010 was reviewed for clinical trials that tested the effectiveness of dentin bonding agents in the longevity of noncarious class V restoration. Results of each study reported using the USPHS criteria for clinical assessment of restoration were included and tabulated. The American Dental Association guidelines for dentin and enamel adhesives were used as a reference to compare the performance of individual bonding agents. Kruskal–Wallis followed by Mann–Whitney U was done to compare the mean Alfa score percentage for the three categories of bonding systems [etch-and-rinse (ER), self-etch primer (SEP), and self-etch-adhesive (SEA)].

Results:

A comparison of the mean Alfa score percentages revealed no difference between the ER, SEP, and SEA categories of bonding systems except for marginal adaptation where ER was found to be superior to SEA.

Conclusion:

The clinical effectiveness of resin-based bonding agents is comparable among the three categories.

Three-year clinical performance of composite restorations placed by undergraduate dental students

This retrospective study evaluated the clinical performance and the reasons for failure of anterior and posterior composite restorations placed by undergraduate dental students over a 3-year period. All cavities were restored using Prime & Bond 2.1 and TPH (Dentsply), according to the manufacturer's indications. One hundred and two patients who had received composite restorations by third and forth year undergraduate students were recalled and examined to analyze the quality of the restorations. The restorations were evaluated using the modified USPHS system. Two hundred and fifty-six composite restorations, 170 in anterior teeth and 86 in posterior teeth, were evaluated. Eighty-five percent of the restorations were considered satisfactory after 3 years. Class II and class IV restorations presented the highest prevalence of failure. Loss of the restoration and deficient marginal adaptation were the main causes of failure. No restoration failed due to secondary caries. Most restorations placed by dental students were considered satisfactory after long-term evaluation. Failure was more prevalent in larger restorations and was not associated with secondary caries.

A 13-year clinical evaluation of two three-step etch-and-rinse adhesives in non-carious class-V lesions

This 13-year randomized clinical trial compared the clinical effectiveness of two three-step etch-and-rinse adhesives in combination with a hybrid, stiffer composite versus a micro-filled, more flexible composite. The influence of composite stiffness on the clinical performance of one of the adhesives was assessed as well. One hundred and forty-two non-carious cervical lesions were restored with composites with contrasting stiffness. Seventy-one patients randomly received two cervical restorations placed following two out of three adhesive procedures: (1) the three-step etch-and-rinse adhesive Permaquick applied with the stiff micro-hybrid composite Amelogen Hybrid (PMQ-H, Ultradent), (2) Permaquick applied with the more flexible micro-filled Amelogen Microfill (PMQ-M, Ultradent), or (3) the "gold-standard" three-step etch-and-rinse adhesive Optibond FL applied with the micro-hybrid composite Prodigy (OFL-P, Kerr). The restorations were evaluated after 6 months, 1, 2, 3, 5, 7, and 13 years of clinical service regarding their retention, marginal integrity and discoloration, caries occurrence, preservation of tooth vitality, and post-operative sensitivity. Retention loss, severe marginal defects, and/or discoloration that needed intervention (repair or replacement) and the occurrence of caries were considered as clinical failures. The recall rate at 13 years was 77%. Bond degradation after 13 years was mainly characterized by a further increase in the presence of small but clinically acceptable marginal defects and superficial marginal discoloration. Twelve percent of the OFL-P restorations were clinically unacceptable. In the PMQ group, 22% of the PMQ-M restorations and 26% of the PMQ-H restorations needed repair or replacement. Regarding the clinical failure rate, Optibond FL scored significantly better than Permaquick (McNemar; p = 0.015). No statistically significant differences were found between the micro-filled and the hybrid composite for each of the parameters evaluated (McNemar, p > 0.05). After 13 years of clinical functioning, the clinical effectiveness of the three adhesive/composite combinations remained highly acceptable.