Barbed suture in oral cavity reconstruction: preliminary results

Does Unidirectional Polyglycolide Caprolactone Barbed Suture Have Improved Outcomes Over Non-barbed Suture When Applied for Intra-oral Incision Closure?

Purpose

The choice of wound closure material may influence the clinical outcomes of intra-oral incision closure. Studies evaluating the application of barbed suture in the oral cavity are scarce. Hence, the present study was carried out with the aim to monitor and compare the efficacy and ease of handling of monofilament polyglycolide caprolactone (PGCL) unidirectional barbed and non-barbed sutures used for intra-oral incision closure in patients undergoing transalveolar extraction of impacted mandibular third molar and mandible fracture open reduction internal fixation.

Methods

A prospective randomized open label study was carried out among subjects requiring intra-oral incision closure following mandibular third molar extraction and isolated mandible fracture fixation. The difficulty index of the impacted third molars was evaluated pre-operatively. Subjects were randomized to receive either 3-0 monofilament PGCL unidirectional barbed or non-barbed sutures. Incision closure time and ease of suture handling were recorded intra-operatively. Post-operatively, patients were monitored for incision healing using the Hollander wound evaluation scale (HWES) and intensity of pain using visual analog scale (VAS) on post-operative days 1, 3 and 7. Data analysis involved descriptive statistics, Chi-square, unpaired t test and multivariate analysis using the IBM SPSS-PC software (v.25.0).

Results

A total of 60 subjects completed the study protocol, who were randomized into two groups (n1 = n2 = 30), comparable in terms of age, gender and treatment (TAE = 51; ORIF = 9) received. The incision healing outcomes were significantly better (p = 0.016) with barbed suture using HWES on day 7. The mean closure time using barbed suture (142.50 ± 34.803 secs) was significantly (p = 0.001) shorter than that with non-barbed suture (204.56 ± 52.94 secs). The mean VAS for the barbed suture (0.97 ± 1.89) was less (p = 0.015, 95% CI) than the non-barbed suture (2.50 ± 2.91) on day 3. The suture handling ease was comparable between the two groups.

Conclusion

Monofilament unidirectional PGCL barbed suture has merits over the non-barbed suture with regards to superior post-operative incision healing, reduced incision closure time (43%), lower post-operative pain and comparable ease of suture handling. Hence, knotless PGCL suture is a promising alternative for intra-oral surgical incision closure in oral and maxillofacial surgery.

Knotless barbed suture versus conventional polydioxanone suture material for intraoral surgical incisions - A randomized controlled trial

Purpose

To evaluate and compare the perioperative wound management and healing of intraoral surgical incisions between the conventional and knotless barbed Polydioxanone suture materials.

Materials and methods

A Randomized Controlled Trial was conducted with well-constructed inclusion and exclusion criteria. 46 participants were allotted into the control and test groups based on a computer-generated randomization sequence. The materials used were 3-0 Stratafix™ knotless barbed PDS suture and conventional 3-0 Ethicon PDSTMII suture materials. Parameters assessed included intraoperative time taken for closure and assessment with Early Wound Healing Score (EHS) on postoperative day 1 and Landry, Turnbull, and Howley (LTH) Healing index on postoperative days 3 and 7. Statistical analyses were done using the Chi-square test and student's t-test with a p-value less than 0.05 indicating statistical significance.

Results

32 patients had surgical intervention for maxillofacial fracture management and 14 patient for orthognathic osteotomies. Surgical sites (n = 60) included maxillary and mandibular vestibules. Intraoperative closure time was better in the test group with statistical significance (p-value = 0.0472). The healing scores on the 3rd and 7th postoperative days were compared between the control and test groups exhibiting statistical significance favouring the test group. The p-values were 0.0479 and 0.0393 respectively.

Conclusion

To conclude, our study concurred with the existing literature in terms of reduced operating time, and better wound healing observed with the knotless barbed suture. Along with statistical significance, all the variables exhibited clinical relevance and better wound management in the test group.

Evaluation of the efficacy of a modified method of treating the incisions of the single-port video-assisted thoracoscopic surgery using V-Loc™ barbed sutures

This paper describes a modified method of applying unidirectional barbed sutures to treat the incisions of the single-port video-assisted thoracoscopic surgery (VATS) and discusses its safety and feasibility. This was a retrospective analysis of 108 patients who underwent single-port VATS admitted to the Department of Thoracic Surgery, the China-Japan Union Hospital of Jilin University, from April 2019 to April 2020. The experimental group (65 patients) was given unidirectional barbed sutures (V-Loc™ sutures) to treat the incision, and the control group (43 patients) had a skin stapler to treat the incision. The complications related to the incisions of the two groups were compared. There was no statistically significant difference between the experimental and control groups regarding incisional infection, incisional splitting, fat liquefaction, and incisional resewing. The pleural fluid outflow from the drainage orifice after removal of the chest tube (0 cases in the experimental group and 7 cases in the control group, P = 0.001) was significantly lower in the experimental group than in the control group. The scores of the scars showed that the experimental group was significantly better than the control group. The modified method of treating the incisions of the single-port VATS with V-Loc™ sutures has good efficacy and safety. It reduces the incidence of pleural fluid outflow from the drainage orifice after removal of the chest tube compared with the traditional stapler suture method, and it has superior cosmetic outcomes.

"Fistula Zero" Project After Total Laryngectomy: The Candiolo Cancer Institute Experience

Objectives

Pharyngocutaneous fistula (PCF) is a troublesome complication after total laryngectomy. The “Fistula zero” project aims to reduce the number of PCF by following a detailed protocol based on three fundamental key points.

Materials and Methods

The Fistula zero project included 77 patients who underwent total laryngectomy in the period from January 2019 to December 2020. The protocol consisted of three main aspects: the systematic placement of a Har-El salivary bypass tube, the continuous horizontal watertight pharyngeal suture using a barbed suture, onlay insetting of a pedicled flap in pre-treated patients.

Results

One case of PCF (1.3%) and three small blind fistulas (3.9%) were observed in this series. The mean length of hospitalization was 18 days.

Conclusion

Pharyngocutaneous fistula (PCF) prolongs hospitalization and delays adjuvant treatments. Thanks to a strict adherence to the protocol, it was possible to reduce PCF rates, avoiding lengthy hospitalization and additional surgical procedures.

A retrospective analysis of the surgical outcomes of different free vascularized flaps used for the reconstruction of the maxillofacial region: Hand-sewn microvascular anastomosis vs anastomotic coupler device

The aim of the study was to assess the surgical outcomes following venous anastomosis with a coupling device and hand-sewn anastomosis in the reconstruction of the maxillofacial region. The study sample was recruited from patients who underwent reconstructive surgeries between January 2011 and November 2016. Tumor type, recipient veins, distribution of flap type, flap survival rates and anastomosis associated complications requiring a flap revision were documented. The follow-up period was four years. In total, 236 patients were included in this study, in which 201 reconstructions were performed via microsurgical venous coupling device (82.04%), whereas hand sewn anastomosis was used in 44 patients (17.96%). Postoperative complications regarding the anastomosis technique revealed that venous coupler devices showed significantly lower complications (4,97%) compared to hand sewn anastomosis (11,36%) (p < 0.05). Within the limitations of the current study, it can be concluded that the coupler system does appear to have advantages over conventional hand-sewn venous anastomosis and should be preferred when possible.

A Noval Method for Surgical Removal of the Impacted Mandibular Third Molar: Sartawi Technique

Background

The goal of this article is to present and evaluate the clinical effectiveness of a new surgical approach using a triangular flap with slight modification and a 3-0 black braided silk surgical suture as flap retractor which is later used after the surgical procedure as a normal suture, aiming to decrease procedure time, soft tissue retraction, and tools for removal of impacted mandibular third molar.

Methods

Patients requiring removal of fully impacted or semi-impacted lower third molars are treated with a new approach using minimal steps and tools, a simple triangular flap, slight mucoperiosteum elevation, as the flap sides are secured and reflected with a silk suture by an assistant holding both sides of the suture from behind the patient.

Results

The surgical area at the procedure was efficiently exposed, and the separation of the crown from the roots was easily done using a surgical handpiece, separation and removal of the crown, removal of the roots with a straight elevator, without the need of flap retractor or overexposure of the surgical side with a conventional triangular flap or others. After the treatment, the two sides of suture are tied together with double overhand knots, and the surgical site was fully repositioned and closed without any complications. 5- and 7-day follow-up was done on the patients, and no complications were reported.

Conclusions

This preliminary study presents a new surgical approach (Sartawi technique) which can be used during extraction of impacted and semi-impacted lower third molars, the results showed that the operation time was noticeably reduced, the size of exposed mucoperiosteum tissue was minimized compared to the conventional method, the use of the mucoperiosteum elevator was eliminated, and number of suture knots and suture used to close the surgical site reduced to a single stitch.