Incidence of ProTaper Universal System Instrument Fractures - A Retrospective Clinical Study

Fabrication of a Potential Electrodeposited Nanocomposite for Dental Applications

In the present study, a nanocrystalline Ni-Fe matrix with reinforced TiO2 nanoparticles as a functional nanocomposite material was fabricated by pulsed current electroforming in UV-LIGA (lithography, electroplating, and molding). The influences of TiO2 nanoparticles on the Ni-Fe nanocomposite deposition were also investigated using scanning electron microscopy, transmission electron microscopy, and in vitro cytotoxicity assay. It was found that the Ni-Fe nanocomposite with 5 wt.% TiO2 nanoparticles showed a smooth surface and better dispersion property. When the Ni-Fe nanocomposite is combined with 20 wt.% TiO2, it resulted in congeries of TiO2 nanoparticles. In addition, TiO2 nanoparticles possessed better dispersion properties as performed in pulse current electrodeposition. The microstructure of the electrodeposited Ni-Fe-TiO2 nanocomposite was a FeNi3 phase containing anatase nano-TiO2. Moreover, the electrodeposited Ni-Fe-5 wt.% TiO2 nanocomposite exhibited a smooth surface and structural integrity. Cytotoxicity assay results also proved that the Ni-Fe nanocomposite with different concentrations of TiO2 nanoparticles had good biocompatibility. Therefore, the optimization of pulse current electroforming parameters was successfully applied to fabricate the Ni-Fe-TiO2 nanocomposite, and thus could be used as an endodontic file material for dental applications.

Incidence of fracture of ProDesign Logic system instruments: A cross-sectional retrospective study

The aim of the present study was to analyze the incidence of fracture of ProDesign Logic system instruments in endodontic treatments performed by a specialist, in addition to identifying the dental group, arch, and the root canal thirds in which the fractures occurred more frequently. Digital radiographs and medical records were initially analyzed and resulted in the selection of 561 teeth (1302 canals) treated between 2018 and 2020, using the ProDesign Logic system instruments. These data were reassessed to determine the occurrence of fractures and identify the dental group and root canal thirds in which they occurred. Then, the data were statistically analyzed using the Fisher's Exact Test (p < 0.05). The general fracture rates were 8.5 and 3.69%, considering the number of teeth and canals treated, respectively. Mandibular first molars were the teeth most associated with the occurrence of fractures (19.1%). When the arches were compared, there was no statistical difference regarding the number of fractures in the different root canal thirds (p = 0.307). However, they were more frequent in the apical third in both arches (p = 0.000). The incidence of fracture of ProDesign Logic system instruments was relatively high and occurred more frequently in the apical third of molars.

Fracture incidence of Reciproc instruments during root canal retreatment performed by postgraduate students: a cross-sectional retrospective clinical study

Objectives

To evaluate the fracture incidence of Reciproc R25 instruments (VDW) used during non-surgical root canal retreatments performed by students in a postgraduate endodontic program.

Materials and Methods

From the analysis of clinical record cards and periapical radiographs of root canal retreatments performed by postgraduate students using the Reciproc R25, a total of 1,016 teeth (2,544 root canals) were selected. The instruments were discarded after a single use. The general incidence of instrument fractures and its frequency was analyzed considering the group of teeth and the root thirds where the fractures occurred. Statistical analysis was performed using the χ² test (p < 0.01).

Results

Seven instruments were separated during the procedures. The percentage of fracture in relation to the number of instrumented canals was 0.27% and 0.68% in relation to the number of instrumented teeth. Four fractures occurred in maxillary molars, 1 in a mandibular molar, 1 in a mandibular premolar and 1 in a maxillary incisor. A greater number of fractures was observed in molars when compared with the number of fractures observed in the other dental groups (p < 0.01). Considering all of the instrument fractures, 71.43% were located in the apical third and 28.57% in the middle third (p < 0.01). One instrument fragment was removed, one bypassed, while in 5 cases, the instrument fragment remained inside the root canal.

Conclusions

The use of Reciproc R25 instruments in root canal retreatments carried out by postgraduate students was associated with a low incidence of fractures.

The Influence of NiTi Alloy on the Cyclic Fatigue Resistance of Endodontic Files

Background: The aim of this study was to analyze the influence of NiTi alloy in endodontic rotary instruments on cyclic fatigue resistance. Methods: One hundred and sixty-four (164) sterile endodontic rotary files were selected and distributed into the following study groups: A: 25.08 F2 ProTaper Universal (PTU) (n = 41); B: 25.06 X2 ProTaper Next (PTN) (n = 41); C: 25.08 F2 ProTaper Gold (PTG) (n = 41), and D: 25.06 ProFile Vortex Blue (PVB) (n = 41). A cyclic fatigue device was designed to conduct the static cyclic fatigue tests with stainless steel artificial root canals systems with 250 µm apical diameter, 60° curvature angle, 5 mm radius of curvature, 20 mm length, and 6% (25.06) and 8% taper (25.08). Failure of the endodontic rotary instrument was detected by a single operator through direct observation and was also filmed to allow measurement of the exact time to failure. Results were analyzed using the ANOVA test and Weibull statistical analysis. Results: All pairwise comparisons presented statistically significant differences between the time to failure for the NiTi alloy study groups (p < 0.001), except between the PTN and PVB study groups (p = 0.379). In addition, statistically significant differences between the number of cycles to failure for the NiTi alloy study groups (p < 0.001) were also observed. Conclusions: The NiTi CM-Gold wire alloy of the ProTaper Gold endodontic rotary files resulted in greater resistance to cyclic fatigue than ProFile Vortex Blue, ProTaper Next, and ProTaper Universal endodontic rotary files.