Costa P, Hu C. Syngas Production via CO2 Reforming of Methane over Aluminum-Promoted NiO-10Al2O3-ZrO2 Catalyst

CO2 reforming of methane was studied at medium temperature (700 °C) using a GSHV of 48,000 h-1 over nickel catalysts supported on ZrO2 promoted by alumina. The catalysts were prepared by a one-step synthesis method and characterized by BET, H2-TPR, XRD, XPS, TEM, Raman spectroscopy, and TGA. The NiO-10Al2O3-ZrO2 catalyst exhibited higher catalytic performance in comparison with the NiO-ZrO2 catalyst. The enhancement of catalytic activity in dry reforming could be associated with the alterations in surface properties due to Al promotion. First, the Al promoter could modify the structure of ZrO2, leading to an increase of its pore volume and pore diameter. Second, the NiO-10Al2O3-ZrO2 catalyst exhibited high resistance to sintering. Third, the NiO-10Al2O3-ZrO2 catalyst showed high suppression to the loss of nickel during a long-term catalytic test. Finally, the addition of Al could inhibit the reduction of ZrO2 during the reduction and reaction, endowing further the stability.

Kinetic Regularities of Methane Dry Reforming Reaction on Nickel-Containing Modified Ceria–Zirconia

The Ni-containing catalysts based on ceria–zirconia doped with Ti and Ti+Nb were prepared by the solvothermal method in supercritical fluids. Ni deposition was carried out by incipient wetness impregnation and the one-pot technique. All materials were investigated by a complex of physicochemical methods (XRD, BET, TEM, H2-TPR). Samples catalytic properties were studied in methane dry reforming in the plug-flow reactor. Conversions of CH4 and CO2, H2/CO ratio, and CO and H2 yields were measured, and detailed kinetics analysis was carried out. The influence of Ni loading method and support modification on the catalytic behavior in the methane dry reforming process was studied. The preparation method of catalysts affects the textural characteristics. For one-pot samples, pore volume and surface area are lower than for impregnated samples. For catalysts on modified supports, strong metal–support interaction was shown to increase catalytic activity. A reduction pretreatment of samples was shown to have significant influence on their catalytic properties. The kinetic parameters such as reaction rate constant at 700 °C, effective activation energy, and TOF were estimated and analyzed.

Kinetic study of the methane dry (CO2) reforming reaction over the Ce0.70La0.20Ni0.10O2−δ catalyst

The kinetic behaviour of the Ce_0.70La_0.20Ni_0.10O_2−δ catalyst during the methane dry reforming reaction was investigated in a fixed bed reactor in the temperature range of 923–1023 K with the partial pressure of CH₄ and CO₂ ranging between 5 and 50 kPa.

A comparative study of the crystal structures of 2-(4-(2-(4-(3-chlorophenyl)pipera -zinyl)ethyl) benzyl)isoindoline-1,3-dione by synchrotron radiation X-ray powder diffraction and single-crystal X-ray diffraction

The crystal structures of the title compound, C27H26ClN3O2, were established by single-crystal X-ray diffraction and synchrotron radiation X-ray powder diffraction. The simulated annealing approach and rigid-body Rietveld refinement were applied to the structure solution from powder data. Direct methods and full-matrix least-squares techniques were used to solve and refine the crystal structure from single-crystal data. The title compound crystallized in space group P $\bar{1}$ with lattice parameters a=17.396(7) Å, b= 10.010(4) Å, c=6.833(3) Å, α=77.345(12) °, β= 93.534(6) °, γ=97.210(9) °, unit-cell volume V= 1151.0(2) Å3, Z=2 from powder data, and in space group P $\bar{1}$with lattice parameters α=82.485(2) °, β= 86.5110(10) °, γ=77.518(2) °, a=6.8159(6) Å, b= 10.0003(9) Å, c=17.4140(15) Å, unit-cell volume V =1148.3(2) Å3, Z=2 from single-crystal data. No detectable impurities were observed.

Methane dry reforming over Ni catalysts supported on Ce–Zr oxides prepared by a route involving supercritical fluids

Ce0.5Zr0.5O2mixed oxides were prepared in a flow reactor in supercritical isopropanol with acetylacetone as a complexing agent. Variation of the nature of the Zr salt and the temperature of synthesis affected the phase composition, morphology and specific surface area of oxides. X-ray diffraction and Raman spectroscopy studies revealed formation of metastable t” and t’ phases. Oxides are comprised of agglomerates with sizes depending on the synthesis parameters. Loading NiO decreases the specific surface area without affecting X-ray particle sizes of supports. Such sintering was the most pronounced for a support with the highest specific surface area, which resulted in the lowest surface content of Ni as estimated by X-ray photoelectron spectroscopy and in the formation of flattened NiO particles partially embedded into the support. The catalytic activity and stability of these samples in the dry reforming of methane were determined by the surface concentration of Ni and the morphology of its particle controlled by the metal-support interaction, which also depends on the type of catalyst pretreatment. Samples based on ceria-zirconia oxides prepared under these conditions provide a higher specific catalytic activity as compared with the traditional Pechini route, which makes them promising for the practical application.

The crystal structure of compositionally homogeneous mixed ceria-zirconia oxides by high resolution X-ray and neutron diffraction methods

The real/atomic structure of single phase homogeneous nanocrystalline Ce0.5Zr0.5O2±δoxides prepared by a modified Pechini route and Ni-loaded catalysts of methane dry reforming on their bases was studied by a combination of neutron diffraction, synchrotron X-ray diffraction, total X-ray scattering and X-ray absorption spectroscopy. The effects of sintering temperature and pretreatment in H2were elucidated. The structure of the mixed oxides corresponds to a tetragonal space group indicating a homogeneous distribution of Ce and Zr cations in the lattice. A pronounced disordering of the oxygen sublattice was revealed by neutron diffraction, supposedly due to incorporation of water into the structure when in contact with air promoted by the generation of anion vacancies in the lattice after reduction or calcination at high temperatures. However, such disordering has not resulted in any occupation of the oxygen interstitial positions in the bulk of the nanodomains.