Methylenedisalicylic Acid as a Biocorrosion Inhibitor for Aluminum in Concentrated Sodium Chloride Solutions

3,3'-Methylenedisalicylic acid (MDS) was synthesized and ascertained on the basis of elemental analyses (C, H) and spectral measurements (IR, mass, ¹H NMR, and UV-vis). Moreover, the prepared MDS compound has been assayed for its antimicrobial action against the growth of fungi as well as Gram-positive and Gram-negative bacteria. The results demonstrated the possibility of its usefulness to restrain the growth of both fungi and bacteria, whereas MDS showed its best impact against Candida albicans. The inhibitive impact of MDS on the corrosion of aluminum (Al) in concentrated sodium chloride solution (3.5 wt % NaCl) has been investigated. The corrosion work was done by potentiodynamic cyclic polarization, electrochemical impedance spectroscopy, and chronoamperometric current-time measurements and complemented by scanning electron microscopy and energy-dispersive X-ray investigations. It was found that MDS molecules protect the aluminum against corrosion, and its ability increases with the increase of concentration from 5 × 10^-5 to 1 × 10^-4 M and further to 5 × 10^-4 M. The electrochemical results were supported by the morphological analysis and proved that the presence of MDS inhibits the uniform and pitting corrosion of Al in the chloride solutions.

Two new polypodane-type bicyclic triterpenoids from mastic

Pistacia lentiscus L. is an evergreen shrub belonging to the Anacardiaceae family, cultivated exclusively in the southern area of Chios Island. Mastic gum as a unique natural resin of the tree Pistacia lentiscus L. has been used extensively in functional foods and traditional medicine. The biological properties of Pistacia resins may be influenced by different chemical constituents. Herein the present work is aimed to further explore the diverse triterpenoids of mastic, and evaluate their anti-inflammatory activity. Two undescribed polypodane-type bicyclic triterpenoids were isolated from the Pistacia resins, their structures were elucidated using ultraviolet, infrared, high resolution electrospray ionization mass spectroscopy (HRESIMS), and nuclear magnetic resonance data. LPS-stimulated RAW264.7 macrophages were incubated with various concentrations of isolated compounds, and results showed that compounds 1 and 2 inhibited nitric oxide production in LPS-induced RAW264.7 cells with IC50 values of 28.1 and 32.6 µM, respectively.

Alleviation of Iron Corrosion in Chloride Solution by N,N′-bis[2-Methoxynaphthylidene]amino]oxamide as a Corrosion Inhibitor

The alleviation of iron corrosion in 3.5% NaCl sodium chloride solution using N,N′-bis[2-methoxynaphthylidene]amino]oxamide (MAO) as a corrosion inhibitor has been reported. The work was achieved using various investigation techniques. Potentiodynamic cyclic polarization (PCP) displayed a powerful inhibition for the corrosion via reducing the iron’s cathodic and anodic reactions. This was reflected in reduced corrosion currents and increased polarization resistances in the presence and upon the increase of MAO concentration. The electrochemical impedance spectroscopy results indicated that MAO molecules provoke the corrosion resistance via increasing polarization resistance. The power of MAO on decreasing pitting attack was also investigated through measuring the change of current with time at −0.475 V(Ag/AgCl). Scanning electron microscopy images were taken of the surface after the current–time measurements were performed in the absence and presence of MAO. The current-time experiments indicated that MAO highly mitigates the corrosion of iron. The energy dispersive X-ray analyzer reported the products found on the tested surfaces. The effect of extending the exposure time from 1 h to 48 h was also tested and was found to alleviate the corrosion of iron, whether MAO molecules are absent or present.

Impediment of Iron Corrosion by N,N′-Bis[2-hydroxynaphthylidene]amino]oxamide in 3.5% NaCl Solution

Hydrazone [N,N′-bis[2-hydroxynaphthylidene]amino]oxamide] derived from the condensation of ethanedihydrazide with 2-hydroxynaphthalene-1-carbaldehyde was synthesized and assessed on the basis of elemental analysis (CHN) and spectral (IR, mass, 13C/1H NMR and UV-Vis) measurements. The influence of N,N-bis([2-hydroxynaphthylidene]amino)oxamide (HAO) in terms of the inhibition of iron corrosion in concentrated sodium chloride solution (3.5 wt.% NaCl) after various exposure periods was assessed. Numerous electrochemical and spectroscopic assessment techniques were performed. Cyclic potentiodynamic polarization experiments indicated that the presence of HAO and its increased concentration decreased the corrosion of iron in NaCl solution by decreasing the corrosion values, anodic and cathodic currents, and corrosion rate. The electrochemical impedance spectroscopy results showed that HAO molecules greatly increased the corrosion resistance. The chronoamperometric experiments performed at −475 mV (Ag/AgCl) revealed that the HAO molecules decreased the absolute currents and reduced the probability of the occurrence of pitting corrosion. The effect of HAO on the inhibition of iron corrosion was also confirmed through scanning electron microscopy micrographs and energy-dispersive X-ray profile analyses, which proved that the surface of the iron sample exposed to chloride solution alone was pitted, while the presence of HAO molecules reduced the severity of the pitting corrosion. The results confirmed that the presence of HAO molecules inhibits the corrosion of iron and this impact increased when the exposure time was increased to 48 h.