A comprehensive review on the biomedical frontiers of nanowire applications

This comprehensive review examines the immense capacity of nanowires, nanostructures characterized by unbounded dimensions, to profoundly transform the field of biomedicine. Nanowires, which are created by combining several materials using techniques such as electrospinning and vapor deposition, possess distinct mechanical, optical, and electrical properties. As a result, they are well-suited for use in nanoscale electronic devices, drug delivery systems, chemical sensors, and other applications. The utilization of techniques such as the vapor-liquid-solid (VLS) approach and template-assisted approaches enables the achievement of precision in synthesis. This precision allows for the customization of characteristics, which in turn enables the capability of intracellular sensing and accurate drug administration. Nanowires exhibit potential in biomedical imaging, neural interfacing, and tissue engineering, despite obstacles related to biocompatibility and scalable manufacturing. They possess multifunctional capabilities that have the potential to greatly influence the intersection of nanotechnology and healthcare. Surmounting present obstacles has the potential to unleash the complete capabilities of nanowires, leading to significant improvements in diagnostics, biosensing, regenerative medicine, and next-generation point-of-care medicines.

Transient, Implantable, Ultrathin Biofuel Cells Enabled by Laser-Induced Graphene and Gold Nanoparticles Composite

Transient power sources with excellent biocompatibility and bioresorablility have attracted significant attention. Here, we report high-performance, transient glucose enzymatic biofuel cells (TEBFCs) based on the laser-induced graphene (LIG)/gold nanoparticles (Au NPs) composite electrodes. Such LIG electrodes can be easily fabricated from polyimide (PI) with an infrared CO₂ laser and exhibit a low impedance (16 Ω). The resulted TEBFC yields a high open circuit potential (OCP) of 0.77 V and a maximum power density of 483.1 μW/cm². The TEBFC not only exhibits a quick response time that enables reaching the maximum OCP within 1 min but also owns a long lifetime over 28 days in vitro. The excellent biocompatibility and transient performance from in vitro and in vivo tests allow long-term implantation of TEBFCs in rats for energy harvesting. The TEBFCs with advanced processing methods provide a promising power solution for transient electronics.

Comparison of Metal-Based Nanoparticles and Nanowires: Solubility, Reactivity, Bioavailability and Cellular Toxicity

While the toxicity of metal-based nanoparticles (NP) has been investigated in an increasing number of studies, little is known about metal-based fibrous materials, so-called nanowires (NWs). Within the present study, the physico-chemical properties of particulate and fibrous nanomaterials based on Cu, CuO, Ni, and Ag as well as TiO₂ and CeO₂ NP were characterized and compared with respect to abiotic metal ion release in different physiologically relevant media as well as acellular reactivity. While none of the materials was soluble at neutral pH in artificial alveolar fluid (AAF), Cu, CuO, and Ni-based materials displayed distinct dissolution under the acidic conditions found in artificial lysosomal fluids (ALF and PSF). Subsequently, four different cell lines were applied to compare cytotoxicity as well as intracellular metal ion release in the cytoplasm and nucleus. Both cytotoxicity and bioavailability reflected the acellular dissolution rates in physiological lysosomal media (pH 4.5); only Ag-based materials showed no or very low acellular solubility, but pronounced intracellular bioavailability and cytotoxicity, leading to particularly high concentrations in the nucleus. In conclusion, in spite of some quantitative differences, the intracellular bioavailability as well as toxicity is mostly driven by the respective metal and is less modulated by the shape of the respective NP or NW.

Assessment of the dose-dependent biochemical and cytotoxicity of zein-coated MgO nanowires in male and female albino rats

Introduction: Recently, zein-coated MgO nanowires were synthesized, which could be promising as an effective antimicrobial compounds that can be combined in the preparation of a diversity of new dental formulations. However, there is a deficiency of information concerning their toxicological profile regarding the human health.Objective: This in vivo study aimed to explore the hepato- and nephrotoxicity of low versus high doses of zein-coated MgO nanowires in rats.Materials and Methods: A 21-day recurrent dose toxicity research was carried out. Wistar rats were divided into 2 main groups, males and females (n = 18). Each group was further subdivided into 3 subgroups: control, MgO-zein nanowires low dose, MgO-zein nanowires high dose. The low dose used was 100 mg/kg while the high dose used was 200 mg/kg.Results: The results showed that MgO-zein nanowires at both doses did not affect the electrolytes levels compared to the control levels. Also, they did not produce any significant alteration in liver function markers in both rats' genders. MgO-zein nanowires at both doses did not produce any effective alteration in serum creatinine in treated rats of both genders. Moreover, very minimal histological alterations were observed in both doses of MgO-zein nanowires in liver and kidney of both genders.Conclusion: Based on the observed safety of zein-coated MgO nanowires, it can be utilized as an effective antimicrobial compound that can be combined in the preparation of a diversity of new dental formulations.KEY MESSAGESMgO NPs are globally used in multiple fields including the therapeutic field.Zein has wide pharmaceutical applications especially coating the tablet over sugar.There are no cytotoxic studies that investigate MgO-zein nanowires safety until now.

Crumpling of silver nanowires by endolysosomes strongly reduces toxicity

Fibrous particles interact with cells and organisms in complex ways that can lead to cellular dysfunction, cell death, inflammation, and disease. The development of conductive transparent networks (CTNs) composed of metallic silver nanowires (AgNWs) for flexible touchscreen displays raises new possibilities for the intimate contact between novel fibers and human skin. Here, we report that a material property, nanowire-bending stiffness that is a function of diameter, controls the cytotoxicity of AgNWs to nonimmune cells from humans, mice, and fish without deterioration of critical CTN performance parameters: electrical conductivity and optical transparency. Both 30- and 90-nm-diameter AgNWs are readily internalized by cells, but thinner NWs are mechanically crumpled by the forces imposed during or after endocytosis, while thicker nanowires puncture the enclosing membrane and release silver ions and lysosomal contents to the cytoplasm, thereby initiating oxidative stress. This finding extends the fiber pathology paradigm and will enable the manufacture of safer products incorporating AgNWs.

Silver Nanowire-Modified Filter with Controllable Silver Ion Release for Point-of-Use Disinfection

Waterborne diseases related to unsafe water are still major threats to public health in some developing countries and rural areas. Providing affordable and safe drinking water globally remains a great challenge in the coming decades. In this study, we develop a high-throughput and conductive silver nanowire (AgNW)-modified composite filter via depositing thin and ultralong AgNWs on a macroporous substrate. An electrochemical filtration cell (EFC) equipped with the composite filter achieves controllable Ag⁺ release at a μg L^-1 level and superior bacterial inactivation performance (>6-log inactivation efficiency) with an operation voltage of only 1 V at a high flux of 100 m³ h^-1 m^-2. Under such operation conditions, each composite filter (effective area: 0.79 cm²) can treat at least 750 mL of the bacterial suspension (∼10⁷ CFU mL^-1 of Escherichia coli) with a low effluent Ag⁺ concentration below 50 μg L^-1 and almost negligible energy consumption of only ∼70 J m^-3.

Fabrication of controllably variable sub-100 nm gaps in silver nanowires by photothermal-induced stress

A technique to fabricate nanogaps with controllably variable gap width in silver (Ag) nanowires (NWs) by photothermal-induced stress utilizing a focused continuous-wave laser (532 nm) is presented. For the case of an Ag NW on gold thin film, a gap width starting from ∼20  nm is achieved with a critical minimum power (CMP) of about 160 mW, whereas in the case of an Ag NW placed on top of a zinc oxide NW, the attained gap width is as small as a few nm (<10  nm) with a CMP of only ∼100  mW. In both cases, the CMP is much lower as compared to the required CMP (∼280  mW) for an Ag NW placed on a bare silica substrate. The photothermal-induced stress combined with Rayleigh instability, melting, and sublimation of Ag aids in breaking the Ag NW. In particular, the former one plays a key role in attaining an extremely narrow gap. This technique to fabricate sub-100 nm nanogaps in metal NWs can be extensively implemented in fabrication and maintenance of nanomechanical, nanoplasmonic, and nanoelectronic devices.

In Vitro Dermal Safety Assessment of Silver Nanowires after Acute Exposure: Tissue vs. Cell Models

Silver nanowires (AgNW) are attractive materials that are anticipated to be incorporated into numerous consumer products such as textiles, touchscreen display, and medical devices that could be in direct contact with skin. There are very few studies on the cellular toxicity of AgNW and no studies that have specifically evaluated the potential toxicity from dermal exposure. To address this question, we investigated the dermal toxicity after acute exposure of polymer-coated AgNW with two sizes using two models, human primary keratinocytes and human reconstructed epidermis. In keratinocytes, AgNW are rapidly and massively internalized inside cells leading to dose-dependent cytotoxicity that was not due to Ag⁺ release. Analysing our data with different dose metrics, we propose that the number of NW is the most appropriate dose-metric for studies of AgNW toxicity. In reconstructed epidermis, the results of a standard in vitro skin irritation assay classified AgNW as non-irritant to skin and we found no evidence of penetration into the deeper layer of the epidermis. The findings show that healthy and intact epidermis provides an effective barrier for AgNW, although the study does not address potential transport through follicles or injured skin. The combined cell and tissue model approach used here is likely to provide an important methodology for assessing the risks for skin exposure to AgNW from consumer products.

Soft Material-Enabled, Flexible Hybrid Electronics for Medicine, Healthcare, and Human-Machine Interfaces

Flexible hybrid electronics (FHE), designed in wearable and implantable configurations, have enormous applications in advanced healthcare, rapid disease diagnostics, and persistent human-machine interfaces. Soft, contoured geometries and time-dynamic deformation of the targeted tissues require high flexibility and stretchability of the integrated bioelectronics. Recent progress in developing and engineering soft materials has provided a unique opportunity to design various types of mechanically compliant and deformable systems. Here, we summarize the required properties of soft materials and their characteristics for configuring sensing and substrate components in wearable and implantable devices and systems. Details of functionality and sensitivity of the recently developed FHE are discussed with the application areas in medicine, healthcare, and machine interactions. This review concludes with a discussion on limitations of current materials, key requirements for next generation materials, and new application areas.

In Situ Silver Nanowire Deposited Cross-Linked Carboxymethyl Cellulose: A Potential Transdermal Anticancer Drug Carrier

Recently, a novel biopolymeric nanocomposite hydrogel comprised of in situ formed silver nanowires (AgNWs) deposited chemically cross-linked carboxymethyl cellulose (CMC) has been developed, which demonstrates superior efficacy as anticancer drug-curcumin carrier. The cross-linked polymer has been prepared by grafting poly [2-(methacryloyloxy) ethyl trimethylammonium chloride] on CMC using diethylene glycol dimethacrylate cross-linker. The nanocomposite hydrogel has the capability to encapsulate both hydrophobic/hydrophilic transdermal drugs. With variation in reaction conditions/parameters, several composite materials have been synthesized and depending on lower swelling/higher cross-linking and greater gel strength, an optimized grade of nanocomposite hydrogel has been selected. The developed nanocomposite hydrogel is characterized with FTIR/NMR spectra, FESEM/XRD/TGA/AFM/XPS analyses, and UV-visible spectroscopy. Rheological study has been performed to enlighten the gel strength of the composite material. The synthesized nanocomposite hydrogel is biodegradable and nontoxic to mesenchymal stem cells (hMSCs). In vitro release of curcumin suggests that in situ incorporation of AgNWs on cross-linked CMC enhanced the penetration power of nanocomposite hydrogel and released the drug in sustained way (∼62% for curcumin released in 4 days). Ex vivo rat skin permeation study confirms that the drug from both the cross-linked and nanocomposite hydrogel was permeable through the rat skin in controlled fashion. Additionally the curcumin loaded composite hydrogel can efficiently kill the MG 63 cancer cells, which has been confirmed by apoptosis study and therefore, probably be a suitable carrier for curcumin delivery toward cancer cells.

Heteroaggregation assisted wet synthesis of core-shell silver-silica-cadmium selenide nanowires

A method has been developed for the wet solution synthesis of core shell heterogeneous nanowires. An ultrathin silica layer was first grown around plain silver nanowires to act as a suitable insulator. An outer nanoparticle layer was then attached through heteroaggregation by dispersing the un-functionalized nanowires in toluene solutions containing nanoparticles of CdSe or Au. Total coverage of nanoparticles on nanowires was found to increase with the nanoparticle size, which is attributed to the increase in the van der Waals interaction between the nanoparticles and the nanowire with the increasing size of nanoparticles. Using this method, we achieved over 79.5% coverage of CdSe nanoparticles (24 nm × 11 nm) on the nanowire surface. Although following the same trend, Au nanoparticles show an overall lower coverage than CdSe, with only 24.2% coverage at their largest particle size of 19 nm in diameter. This result is attributed to the increase in steric repulsion during attachment due to the increasing length of capping ligands. Investigation of the core-shell nanowire's optical properties yielded CdSe Raman peak enhancement by a factor of 2-3 due to the excitation of surface plasmon propagation. Our method can be applied to the attachment of a wide range of nanoparticles to nanowire materials in non-polar solution and the core-shell nanowires show great potential for incorporation into various microscopic and drug delivery applications.