Photocatalysis for Air Treatment Processes: Current Technologies and Future Applications for the Removal of Organic Pollutants and Viruses

Photocatalysis for air treatment or photocatalytic oxidation (PCO) is a relatively new technology which requires titanium dioxide (TiO2) and a source of light (Visible or near-UV) to degrade pollutants contained in air streams. Present approaches for the photodegradation of indoor pollutants in air streams aim to eliminate volatile organic compounds (VOCs) and viruses, which are both toxic and harmful to human health. Photocatalysis for air treatment is an inexpensive and innovative green process. Additionally, it is a technology with a reduced environmental footprint when compared to other conventional air treatments which demand significant energy, require the disposal of used materials, and release CO2 and other greenhouse gases to the environment. This review discusses the most current and relevant information on photocatalysis for air treatment. This article also provides a critical review of (1) the most commonly used TiO2-based semiconductors, (2) the experimental syntheses and the various photocatalytic organic species degradation conversions, (3) the developed kinetics and computational fluid dynamics (CFD) and (4) the proposed Quantum Yields (QYs) and Photocatalytic Thermodynamic Efficiency Factors (PTEFs). Furthermore, this article contains important information on significant factors affecting the photocatalytic degradation of organic pollutants, such as reactor designs and type of photoreactor irradiation. Overall, this review describes state-of-the-art photocatalysis for air treatment to eliminate harmful indoor organic molecules, reviewing as well the potential applications for the inactivation of SARS-CoV2 (COVID-19) viruses.

Photocatalytic Activity of TiO2 Thin Films: Kinetic and Efficiency Study

The aim of this work was to evaluate the photocatalytic activity of two distinct anatase thin films. Films were prepared following the sol-gel procedure from titanium (IV) isopropoxide (TF-1) and from commercial TiO2 P25 as a starting material (TF-2). The films were compared based on the salicylic acid (2-dihydroxybenzoic acid, 2-HBA) photocatalytic degradation in reactors of different geometry and under different irradiation conditions. Experiments were performed in (i) an annular photoreactors operated under turbulent flow (TAR1 and TAR2) and (ii) semi-annular reactor operated under laminar flow (LFR). The TF-1 and TF-2 were immobilized on the inner side of outer wall of TAR1 and TAR2 and on the bottom of LFR. Experimental study included sorption study and four consecutive photocatalytic runs (tirr= 8 h) using TF-1 and TF-2 in each reactor. Obtained results confirmed the stability and the similar photocatalytic activity of the both films. The 2,5-dihydroxybenzoic acid (2,5-DHBA) and 2,3-dihydroxybenzoic acid (2,3-DHBA) were identified as main 2-HBA degradation by-products. Kinetic models were developed accordingly. Incident photon flux was determined along the inner reactor wall in annular reactors and on the bottom of LFR, i. e. on the thin film surface (I tf, W m−2) using ESSDE radiation emission model. The irradiation factor, i. e. the product of absorption coefficient and incident photon flux at film surface (μI tf(z))m was introduced into the kinetic models. Resulting reaction rate constants k i (min−1W−0.5 m1.5) were independent of reactor geometry, hydrodynamics, irradiation condition and the optical properties of thin films. Efficiencies of TF-1 and TF-2 in studied reactors were given on the basis of quantum yields (QY) for 2-HBA oxidation and overall mineralization toward CO2.