Effect of Adding Chelating Ligands on the Catalytic Performance of Rh-Promoted MoS2 in the Hydrodesulfurization of Dibenzothiophene

Hydrodesulfurization (HDS) is a widely used process currently employed in petroleum refineries to eliminate organosulfur compounds in fuels. The current hydrotreating process struggles to remove organosulfur compounds with a steric hindrance due to the electronic nature of the current catalysts employed. In this work, the effects of adding chelating ligands such as ethylenediaminetetraacetic acid (EDTA), citric acid (CA) and acetic acid (AA) to rhodium (Rh) and active molybdenum (Mo) species for dibenzothiophene (DBT) HDS catalytic activity was evaluated. HDS activities followed the order of RhMo/ɣ-Al2O3 (88%) > RhMo-AA/ɣ-Al2O3 (73%) > RhMo-CA/ɣ-Al2O3 (72%) > RhMo-EDTA/ɣ-Al2O3 (68%). The observed trend was attributed to the different chelating ligands with varying electronic properties, thus influencing the metal–support interaction and the favorable reduction of the Mo species. RhMo/ɣ-Al2O3 offered the highest HDS activity due to its (i) lower metal–support interaction energy, as observed from the RhMo/ɣ-Al2O3 band gap of 3.779 eV and the slight shift toward the lower BE of Mo 3d, (ii) increased Mo-O-Mo species (NMo-O-Mo ~1.975) and (iii) better sulfidation of Rh and MoO in RhMo/ɣ-Al2O3 compared to the chelated catalysts. The obtained data provides that HDS catalytic activity was mainly driven by the structural nature of the RhMo-based catalyst, which influences the formation of more active sites that can enhance the HDS activity.