Understanding Marine Biodegradation of Bio-Based Oligoesters and Plasticizers

The study reports the enzymatic synthesis of bio-based oligoesters and chemo-enzymatic processes for obtaining epoxidized bioplasticizers and biolubricants starting from cardoon seed oil. All of the molecules had M_W below 1000 g mol^-1 and were analyzed in terms of marine biodegradation. The data shed light on the effects of the chemical structure, chemical bond lability, thermal behavior, and water solubility on biodegradation. Moreover, the analysis of the biodegradation of the building blocks that constituted the different bio-based products allowed us to distinguish between different chemical and physicochemical factors. These hints are of major importance for the rational eco-design of new benign bio-based products. Overall, the high lability of ester bonds was confirmed, along with the negligible effect of the presence of epoxy rings on triglyceride structures. The biodegradation data clearly indicated that the monomers/building blocks undergo a much slower process of abiotic or biotic transformations, potentially leading to accumulation. Therefore, the simple analysis of the erosion, hydrolysis, or visual/chemical disappearance of the chemical products or plastic is not sufficient, but ecotoxicity studies on the effects of such small molecules are of major importance. The use of natural feedstocks, such as vegetable seed oils and their derivatives, allows the minimization of these risks, because microorganisms have evolved enzymes and metabolic pathways for processing such natural molecules.

Enzymatic recycling of polymacrolactones

The use of renewable monomers to make new polyesters which could replace the ones obtained from petrochemical resources employing green processes is a big concern in these days. With this...

Co-Entrapment of Sorafenib and Cisplatin Drugs and iRGD Tumour Homing Peptide by Poly[ε-caprolactone-co-(12-hydroxystearate)] Copolymer

The drug-loaded nanocarriers have overcome various challenges compared with the pure chemotherapeutic drug, such as limited bioavailability, multiple drug resistance, poor patient compliance, and adverse drug reactions, offering advantages such as protection from degradation in the blood stream, better drug solubility, and improved drug stability. One promising group of controlled and targeted drug delivery systems is polymer-based nanoparticles that can sustain the release of the active agent by diffusion and their degradation. Sorafenib is the only drug that can prolong the life of patients suffering from hepatocellular carcinoma. Cisplatin remains one of the most widely used broad-spectrum anticancer drugs for the treatment of a variety of solid tumours. Nanoformulations can exert a synergistic effect by entrapping two drugs with different modes of action, such as sorafenib and cisplatin. In our study, polymeric nanoparticles were prepared with a good production yield by an improved double emulsion solvent evaporation method using the copolymer of 12-hydroxystearic acid with ε-caprolactone (12CL), a biocatalytically synthesised biocompatible and biodegradable carrier, for the co-entrapment of sorafenib and cisplatin in nanotherapeutics. A bovine serum albumin (BSA) model compound was used to increase the cisplatin incorporation; then, it was successfully substituted by a iRGD tumour penetrating peptide that might provide a targeting function of the nanoparticles.

P450-driven plastic-degrading synthetic bacteria

Plastic contamination currently threatens a wide variety of ecosystems and presents damaging repercussions and negative consequences for many wildlife species. Sustainable plastic waste management is an important approach to environmental protection and a necessity in the current life cycle of plastics in nature. Plastic biodegradation by microorganisms is a notable possible solution. This opinion article includes a proposal to use hypothetical P450 enzymes with an engineered active site as potent trigger biocatalysts to biodegrade polyethylene (PE) via in-chain hydroxylation into smaller products of linear aliphatic alcohols and alkanoic acids based on cascade enzymatic reactions. Furthermore, we propose the adoption of P450 into plastic-eating synthetic bacteria for PE biodegradation. This strategy can be applicable to other dense plastics, such as polypropylene (PP) and polystyrene (PS).

Achievements and Trends in Biocatalytic Synthesis of Specialty Polymers from Biomass-Derived Monomers Using Lipases

New technologies for the conversion of biomass into high-value chemicals, including polymers and plastics, is a must and a challenge. The development of green processes in the last decade involved a continuous increase of the interest towards the synthesis of polymers using in vitro biocatalysis. Among the remarkable diversity of new bio-based polymeric products meeting the criteria of sustainability, biocompatibility, and eco-friendliness, a wide range of polyesters with shorter chain length were obtained and characterized, targeting biomedical and cosmetic applications. In this review, selected examples of such specialty polymers are presented, highlighting the recent developments concerning the use of lipases, mostly in immobilized form, for the green synthesis of ε-caprolactone co-polymers, polyesters with itaconate or furan units, estolides, and polyesteramides. The significant process parameters influencing the average molecular weights and other characteristics are discussed, revealing the advantages and limitations of biocatalytic processes for the synthesis of these bio-based polymers.

Biocatalytic Approach for Novel Functional Oligoesters of ε-Caprolactone and Malic Acid

Biocatalysis has developed in the last decades as a major tool for green polymer synthesis. The particular ability of lipases to catalyze the synthesis of novel polymeric materials has been demonstrated for a large range of substrates. In this work, novel functional oligoesters were synthesized from ε-caprolactone and D,L/L-malic acid by a green and sustainable route, using two commercially available immobilized lipases as catalysts. The reactions were carried out at different molar ratios of the comonomers in organic solvents, but the best results were obtained in solvent-free systems. Linear and cyclic oligomeric products with average molecular weights of about 1500 Da were synthesized, and the formed oligoesters were identified by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) analysis. The oligoester synthesis was not enantioselective in the studied reaction conditions. The operational stability of both biocatalysts (Novozyme 435 and GF-CalB-IM) was excellent after reutilization in 13 batch reaction cycles. The thermal properties of the reaction products were investigated by thermogravimetric (TG) and differential scanning calorimetry (DSC) analysis. The presence of polar pendant groups in the structure of these oligomers could widen the possible applications compared to the oligomers of ε-caprolactone or allow the conversion to other functional materials.

Enzymatic Synthesis of Estolides from Castor Oil

Estolides are fatty acid polyesters with applications in both industry and consumer products. Recently, reports have emerged detailing lipase-catalyzed synthesis of estolides from free hydroxy fatty acids. In this paper, we describe a simple alternative enzymatic process, in which castor oil is directly converted to an estolide mixture by Candida antarctica lipase A (CALA) catalyzed transesterification. The reaction mixture is analyzed by NMR to determine the estolide number (EN) and MALDI MS to identify individual components, in addition to titration to determine the acid value (AV). Estolide trimers and tetramers (EN 2–3) were formed over 24 h in a system with 2:1 (v/v) castor oil–water. Further, utilizing different lipase specificities, addition of Thermomyces lanuginosus lipase (TLL), allowed the CALA product mixture to be cleaned up by hydrolyzing attached glycerol. In addition, a three-enzyme process is suggested, in which a simple alcohol is added and Candida antarctica lipase B (CALB) is used to esterify carboxylic acids to lower AV.

Enzymatic synthesis and characterization of novel terpolymers from renewable sources

2,5-Furandicarboxylic acid and itaconic acid are both important biobased platform chemicals and their terpolymer with 1,6-hexanediol (HDO) can be the starting point for a new class of reactive polyesters, with important applications. The green synthetic route developed in this study involves a biocatalytic condensation polymerization reaction of dimethyl furan-2,5-dicarboxylate (DMFDC) and dimethyl itaconate (DMI) with HDO in toluene at 80°C, using commercial immobilized lipases from Candida antarctica B. In the best conditions, the formed polymer product was isolated with more than 80% yield, containing about 85% terpolymer with average molecular mass of about 1200 (Mn, calculated from MALDI-TOF MS data) and 15% DMFDC_HDO copolymer. Considering the higher reactivity of DMFDC, the composition of the synthesized polymer can be directed by adjusting the molar ratio of DMFDC and DMI, as well as by extending the reaction time. Structural analysis by NMR demonstrated the regioselective preference for the carbonyl group from DMI adjacent to the methylene group. The biocatalyst was successfully reused in multiple reaction cycles.

Biocatalytic Route for the Synthesis of Oligoesters of Hydroxy-Fatty acids and ϵ-Caprolactone

Developments of past years placed the bio-based polyesters as competitive substitutes for fossil-based polymers. Moreover, enzymatic polymerization using lipase catalysts has become an important green alternative to chemical polymerization for the synthesis of polyesters with biomedical applications, as several drawbacks related to the presence of traces of metal catalysts, toxicity and higher temperatures could be avoided. Copolymerization of ϵ-caprolactone (CL) with four hydroxy-fatty acids (HFA) from renewable sources, 10-hydroxystearic acid, 12-hydroxystearic acid, ricinoleic acid, and 16-hydroxyhexadecanoic acid, was carried out using commercially available immobilized lipases from Candida antarctica B, Thermomyces lanuginosus, and Pseudomonas stutzeri, as well as a native lipase. MALDI-TOF-MS and 2D-NMR analysis confirmed the formation of linear/branched and cyclic oligomers with average molecular weight around 1200 and polymerization degree up to 15. The appropriate selection of the biocatalyst and reaction temperature allowed the tailoring of the non-cyclic/cyclic copolymer ratio and increase of the total copolymer content in the reaction product above 80%. The catalytic efficiency of the best performing biocatalyst (Lipozyme TL) is evaluated during four reaction cycles, showing excellent operational stability. The thermal stability of the reaction products is assessed based on TG and DSC analysis. This new synthetic route for biobased oligomers with novel functionalities and properties could have promising biomedical applications.

Synthesis, characterization and enzymatic degradation of copolymers of ε-caprolactone and hydroxy-fatty acids

New copolymers of ε-caprolactone with three hydroxy-fatty acids, 12-hydroxy stearic acid, 16-hydroxyhexadecanoic acid and ricinoleic acid, were synthesized by catalytic polyesterification. The reactions were carried out in solvent-free systems and in organic solvents as well, using tin(II) 2-ethylhexanoate as catalyst, at different temperatures and molar ratios of the comonomers. Cyclic and linear polymeric products with medium molar weight of about 2000 Da have been synthesized and their chemical structures were confirmed by FT-IR, NMR and MALDI-TOF MS analysis. The synthesis parameters were optimized and the ε-caprolactone/hydroxy acid molar ratio was set as 5:1, according to mass spectrometry results. The biodegradability of the newly synthesized polymers was studied in the presence of Candida antarctica B lipase in phosphate buffer solutions (pH=7.4), at 37°C. The weight-loss profile emphasized the degradation of the 16-hydroxyhexadecanoic acid based polymer samples at more than 50% of their initial weight in 18 days of incubation in the presence of the lipase. The composition of the degradation products was assessed using the GC-MS technique and displayed residues of the comonomers moieties.