Autocatalysis in Eschenmoser Coupling Reactions

The Eschenmoser coupling reaction (ECR) of thioamides with electrophiles is believed to proceed via thiirane intermediates. However, little is known about converting the intermediates into ECR products. Previous mechanistic studies involved external thiophiles to remove the sulfur atom from the intermediates. In this work, an ECR proceeding without any thiophilic agent or base is studied by electrospray ionization-mass spectrometry. ESI-MS enables the detection of the so-far elusive polysulfide species Sn , with n ranging from 2 to 16 sulfur atoms, proposed to be the key species leading to product formation. Integrating observations from ion mobility spectrometry, ion spectroscopy, and reaction monitoring via flow chemistry coupled with mass spectrometry provides a comprehensive understanding of the reaction mechanism and uncovers the autocatalytic nature of the ECR reaction.

Liberation of carbon monoxide from formic acid mediated by molybdenum oxyanions

Multistage mass spectrometry experiments, isotope labelling and DFT calculations were used to explore whether selective decarbonylation of formic acid could be mediated by molybdate anions [(MoO3)x(OH)]- (x = 1 and 2) via a formal catalytic cycle involving two steps. In step 1, both molybdate anions undergo gas-phase ion-molecule reactions (IMR) with formic acid to produce the coordinated formates [(MoO3)x(O2CH)]- and H2O. In step 2, both coordinated formates [(MoO3)x(O2CH)]- undergo decarbonylation under collision-induced dissociation (CID) conditions to reform the molybdate anions [(MoO3)x(OH)]- (x = 1 and 2), thus closing a formal catalytic cycle. In the case of [MoO3(O2CH)]- an additional decarboxylation channel also occurs to yield [MoO3(H)]-, which is unreactive towards formic acid. The reaction between [Mo18O3(18OH)]- and formic acid gives rise to [Mo18O3(O2CH)]- highlighting that ligand substitution occurs without 18O/16O exchange between the coordinated 18OH ligand and HC16O2H. The reaction between [(MoO3)x(OD)]- (x = 1 and 2) and DCO2H initially produces [(MoO3)x(OH)]- (x = 1 and 2), indicating that D/H exchange occurs. DFT calculations were carried out to investigate the reaction mechanisms and energetics associated with both steps of the formal catalytic cycle and to better understand the competition between decarbonylation and decarboxylation, which is crucial in developing a selective catalyst. The CO and CO2 loss channels from the monomolybdate anion [MoO3(O2CH)]- have similar barrier heights which is in agreement with experimental results where both fragmentation channels are observed. In contrast, the dimolybdate anion is more selective, since the decarbonylation pathway of [(MoO3)2(O2CH)]- is both kinetically and thermodynamically favoured, which agrees with experimental observations where the CO loss channel is solely observed.

Kinetics of ligand exchange in solution: a quantitative mass spectrometry approach

Complex speciation and exchange kinetics of labile ligands are critical parameters for understanding the reactivity of metal complexes in solution. We present a novel approach to determine ligand exchange parameters based on electrospray ionization mass spectrometry (ESI-MS). The introduction of isotopically labelled ligands to a solution of metal host and unlabelled ligands allows the quantitative investigation of the solution-phase equilibria. Furthermore, ion mobility separation can target individual isomers, such as ligands bound at specific sites. As a proof of concept, we investigate the solution equilibria of labile pyridine ligands coordinated in the cavity of macrocyclic porphyrin cage complexes bearing diamagnetic or paramagnetic metal centres. The effects of solvent, porphyrin coordination sphere, transition metal, and counterion on ligand dissociation are discussed. Rate constants and activation parameters for ligand dissociation in the solution can be derived from our ESI-MS approach, thereby providing mechanistic insights that are not easily obtained from traditional solution-phase techniques.

C versus O Protonation in Zincate Anions: A Simple Gas-Phase Model for the Surprising Kinetic Stability of Organometallics

For better understanding the intrinsic reactivity of organozinc reagents, we have examined the protolysis of the isolated zincate ions Et₃ Zn^- , Et₂ Zn(OH)^- , and Et₂ Zn(OH)₂ Li^- by 2,2,2-trifluoroethanol in the gas phase. The protonation of the hydroxy groups and the release of water proceed much more efficiently than the protonation of the ethyl groups and the liberation of ethane. Quantum-chemical computations and statistical-rate theory calculations fully reproduce the experimental findings and attribute the lower reactivity of the more basic ethyl moiety to higher intrinsic barriers, which override the thermodynamic preference for its protonation. Thus, our minimalistic gas-phase model provides evidence for the intrinsically low reactivity of organozinc reagents toward proton donors and helps to explain their remarkable kinetic stability against moisture and even protic media.

Microscopic Reactivity of Phenylferrate Ions toward Organyl Halides

Despite its practical importance, organoiron chemistry remains poorly understood due to its mechanistic complexity. Here, we focus on the oxidative addition of organyl halides to phenylferrate anions in the gas phase. By mass-selecting individual phenylferrate anions, we can determine the effect of the oxidation state, the ligation, and the nuclearity of the iron complex on its reactions with a series of organyl halides RX. We find that Ph2 Fe(I)- and other low-valent ferrates are more reactive than Ph3 Fe(II)- ; Ph4 Fe(III)- is inert. The coordination of a PPh3 ligand or the presence of a second iron center lower the reactivity. Besides direct cross-coupling reactions resulting in the formation of RPh, we also observe the abstraction of halogen atoms. This reaction channel shows the readiness of organoiron species to undergo radical-type processes. Complementary DFT calculations afford further insight and rationalize the high reactivity of the Ph2 Fe(I)- complex by the exothermicity of the oxidative addition and the low barriers associated with this reaction step. At the same time, they point to the importance of changes of the spin state in the reactions of Ph3 Fe(II)- .

Regioselective Bond-Forming and Hydrolysis Reactions of Doubly Charged Vanadium Oxide Anions in the Gas Phase

The gas-phase reactivity of vanadium-containing dianions, NaV3O92− and its hydrated form H2NaV3O102−, were probed towards sulphur dioxide at room temperature by ion-molecule reaction (IMR) experiments in the collision cell of an ion trap mass spectrometer. The sequential addition of two SO2 molecules to the NaV3O92− dianion leads to the breakage of the stable V3O9 backbone, resulting in a charge separation process with the formation of new V-O and S-O bonds. On the contrary, the H2NaV3O102− hydroxide species reacts with SO2, promoting regioselective hydrolysis and bond-forming processes, the latter similar to that observed for the NaV3O92− reactant anion. Kinetic analysis shows that these reactions are fast and efficient with rate constants of the 10−9 (±30) cm3 s−1 molecule−1 order of magnitude.

Accelerated d-Fructose Acid-Catalyzed Reactions in Thin Films Formed by Charged Microdroplets Deposition

Thin films derived by the deposition of charged microdroplets generated in the ESI source of a mass spectrometer act as highly concentrated reaction vessels in which the final products of an ion-molecule reaction can be isolated by their precipitation onto a solid surface under ambient conditions. In this study, the ESI Z-spray source supplied to a Q-TOF Ultima mass spectrometer was used to investigate the d-fructose acid-catalyzed reactions by microdroplets deposition onto a stainless-steel target surface. High conversion ratios of d-fructose into 5-hydroxymethylfuraldehyde (5-HMF), 5-methoxymethylfuraldehyde (5-MMF), and difructrose anhydrides (DFAs) were obtained with HCl and KHSO₄ as metal-free catalysts by using synthetic conditions under which the same products in bulk are not formed. Furthermore, the reaction outcome was found to be highly sensitive to the catalyst and the solvent employed as well as to the ESI source parameters influencing the thin film formation from microdroplets deposition onto the solid surface.

Intracluster Sulphur Dioxide Oxidation by Sodium Chlorite Anions: A Mass Spectrometric Study

The reactivity of [NaL·ClO₂]⁻ cluster anions (L = ClO_x⁻; x = 0–3) with sulphur dioxide has been investigated in the gas phase by ion–molecule reaction experiments (IMR) performed in an in-house modified Ion Trap mass spectrometer (IT-MS). The kinetic analysis revealed that SO₂ is efficiently oxidised by oxygen-atom (OAT), oxygen-ion (OIT) and double oxygen transfer (DOT) reactions. The main difference from the previously investigated free reactive ClO₂⁻ is the occurrence of intracluster OIT and DOT processes, which are mediated by the different ligands of the chlorite anion. This gas-phase study highlights the importance of studying the intrinsic properties of simple reacting species, with the aim of elucidating the elementary steps of complex processes occurring in solution, such as the oxidation of sulphur dioxide.

ORGANOMETALLIC GAS-PHASE ION CHEMISTRY AND CATALYSIS: INSIGHTS INTO THE USE OF METAL CATALYSTS TO PROMOTE SELECTIVITY IN THE REACTIONS OF CARBOXYLIC ACIDS AND THEIR DERIVATIVES

Carboxylic acids are valuable organic substrates as they are widely available, easy to handle, and exhibit structural and functional variety. While they are used in many standard synthetic protocols, over the past two decades numerous studies have explored new modes of metal-mediated reactivity of carboxylic acids and their derivatives. Mass spectrometry-based studies can provide fundamental mechanistic insights into these new modes of reactivity. Here gas-phase models for the following catalytic transformations of carboxylic acids and their derivatives are reviewed: protodecarboxylation; dehydration; decarbonylation; reaction as coordinated bases in C-H bond activation; remote functionalization and decarboxylative C-C bond coupling. In each case the catalytic problem is defined, insights from gas-phase studies are highlighted, comparisons with condensed-phase systems are made and perspectives are reached. Finally, the potential role for mechanistic studies that integrate both gas- and condensed-phase studies is highlighted by recent studies on the discovery of new catalysts for the selective decomposition of formic acid and the invention of the new extrusion-insertion class of reactions for the synthesis of amides, thioamides, and amidines. © 2020 John Wiley & Sons Ltd. Mass Spec Rev.

A mechanistic investigation of the Suzuki polycondensation reaction using MS/MS methods

The Suzuki polycondensation can be studied in real time using MS/MS methods, even with the molecular weight of the reaction components changing with every turnover.

Charge-Tagged N-Heterocyclic Carbenes (NHCs): Revealing the Hidden Side of NHC-Catalysed Reactions through Electrospray Ionization Mass Spectrometry

N-heterocyclic carbenes (NHCs) are key intermediates in a variety of chemical reactions. Owing to their transient nature, the interception and characterization of these reactive species have always been challenging. Similarly, the study of reaction mechanisms in which carbenes act as catalysts is still an active research field. This Minireview describes the contribution of electrospray ionization mass spectrometry (ESI-MS) to the detection of charge-tagged NHCs resulting from the insertion of an ionic group into the molecular scaffold. The use of different mass spectrometric techniques, combined with the charge-tagging strategy, allowed clarification of the involvement of NHCs in archetypal reactions and the study of their intrinsic chemistry.

Reactive metallocene cations as sensitive indicators of gas-phase oxygen and water

Gas-phase oxidation of air-sensitive organometallic compounds does not proceed to a significant extent in mass spectrometric analysis unless a vacant coordination site is generated, making nitrogen generators a suitable source of desolvation gas.

Gas-Phase Synthesis and Reactivity of Ligated Group 10 Ions in the Formal +1 Oxidation State

Electrospray ionization of the group 10 complexes [(phen)M(O₂CCH₃)₂] (phen=1,10-phenanthroline, M = Ni, Pd, Pt) generates the cations [(phen)M(O₂CCH₃)]⁺, whose gas-phase chemistry was studied using multistage mass spectrometry experiments in an ion trap mass spectrometer with the combination of collision-induced dissociation (CID) and ion-molecule reactions (IMR). Decarboxylation of [(phen)M(O₂CCH₃)]⁺ under CID conditions generates the organometallic cations [(phen)M(CH₃)]⁺, which undergo bond homolysis upon a further stage of CID to generate the cations [(phen)M]^+· in which the metal center is formally in the +1 oxidation state. In the case of [(phen)Pt(CH₃)]⁺, the major product ion [(phen)H]⁺ was formed via loss of the metal carbene Pt=CH₂. DFT calculated energetics for the competition between bond homolysis and M=CH₂ loss are consistent with their experimentally observed branching ratios of 2% and 98% respectively. The IMR of [(phen)M]^+· with O₂, N₂, H₂O, acetone, and allyl iodide were examined. Adduct formation occurs for O₂, N₂, H₂O, and acetone. Upon CID, all adducts fragment to regenerate [(phen)M]^+·, except for [(phen)Pt(OC(CH₃)₂)]^+·, which loses a methyl radical to form [(phen)Pt(OCCH₃)]⁺ which upon a further stage of CID regenerates [(phen)Pt(CH₃)]⁺ via CO loss. This closes a formal catalytic cycle for the decomposition of acetone into CO and two methyl radicals with [(phen)Pt]^+· as catalyst. In the IMR of [(phen)M]^+· with allyl iodide, formation of [(phen)M(CH₂CHCH₂)]⁺ was observed for all three metals, whereas for M = Pt also [(phen)Pt(I)]⁺ and [(phen)Pt(I)₂(CH₂CHCH₂)]⁺ were observed. Finally, DFT calculated reaction energetics for all IMR reaction channels are consistent with the experimental observations.

Role of Ligand in the Selective Production of Hydrogen from Formic Acid Catalysed by the Mononuclear Cationic Zinc Complexes [(L)Zn(H)]+ (L=tpy, phen, and bpy)

A series of zinc-based catalysts was evaluated for their efficiency in decomposing formic acid into molecular hydrogen and carbon dioxide in the gas phase using quadrupole ion trap mass spectrometry experiments. The effectiveness of the catalysts in the series [(L)Zn(H)]⁺ , where L=2,2':6',2''-terpyridine (tpy), 1,10-phenanthroline (phen) or 2,2'-bipyrydine (bpy), was found to depend on the ligand used, which turned out to be fundamental in tuning the catalytic properties of the zinc complex. Specifically, [(tpy)Zn(H)]⁺ displayed the fastest reaction with formic acid proceeding by dehydrogenation to produce the zinc formate complex [(tpy)Zn(O₂ CH)]⁺ and H₂ . The catalysts [(L)Zn(H)]⁺ are reformed by decarboxylating the zinc formate complexes [(L)Zn(O₂ CH)]⁺ by collision-induced dissociation, which is the only reaction channel for each of the ligands used. The decarboxylation reaction was found to be reversible, since the zinc hydride complexes [(L)Zn(H)]⁺ react with carbon dioxide yielding the zinc formate complex. This reaction was again substantially faster for L=tpy than L=phen or bpy. The energetics and mechanisms of these processes were modelled using several levels of density functional theory (DFT) calculations. Experimental results are fully supported by the computational predictions.

Gas-Phase Reactions of the Group 10 Organometallic Cations, [(phen)M(CH3)]+ with Acetone: Only Platinum Promotes a Catalytic Cycle via the Enolate [(phen)Pt(OC(CH2)CH3)]+

Electrospray ionisation of the ligated group 10 metal complexes [(phen)M(O2CCH3)2] (M = Ni, Pd, Pt) generates the cations [(phen)M(O2CCH3)]+, whose gas-phase chemistry was studied using multistage mass spectrometry experiments in an ion trap mass spectrometer with the combination of collision-induced dissociation (CID) and ion-molecule reactions (IMR). A new catalytic cycle has been discovered. In step 1, decarboxylation of [(phen)M(O2CCH3)]+ under CID conditions generates the organometallic cations [(phen)M(CH3)]+, which react with acetone to generate the [(phen)M(CH3)(OC(CH3)2)]+ adducts in competition with formation of the coordinated enolate for M = Pt (step 2). For M = Ni and Pd, the adducts regenerate [(phen)M(CH3)]+ upon CID. In the case of M = Pt, loss of methane is favored over loss of acetone and results in the formation of the enolate complex, [(phen)Pt(OC(CH2)CH3)]+. Upon further CID, both methane and CO loss can be observed resulting in the formation of the ketenyl and ethyl complexes [(phen)Pt(OCCH)]+ and [(phen)Pt(CH2CH3)]+ (step 3), respectively. In step 4, CID of [(phen)Pt(CH2CH3)]+ results in a beta-hydride elimination reaction to yield the hydride complex, [(phen)Pt(H)]+, which reacts with acetic acid to regenerate the acetate complex [(phen)Pt(O2CCH3)]+ and H2 in step 5. Thus, the catalytic cycle is formally closed, which corresponds to the decomposition of acetone and acetic acid into methane, CO, CO2, ethene and H2. All except the last step of the catalytic cycle are modelled using DFT calculations with optimizations of structures at the M06/SDD 6-31G(d) level of theory.

Mechanistic knowledge and noncovalent interactions as the key features for enantioselective catalysed multicomponent reactions: a critical review

This critical short review focuses on some key features which determine successful enantioselective catalysed multicomponent reactions (MCRs) and are typically underappreciated in the literature.

Ionization methods for the mass spectrometry of organometallic compounds

The rapid development of new ionization methods has greatly expanded the ability of mass spectrometry to target diverse areas of chemistry. Synthetic organometallic and inorganic chemists often find themselves with interesting characterization problems that mass spectrometry could potentially find the answer for, but without a guide for choosing the appropriate method of analysis. This tutorial review seeks to provide that guidance via a simple flow chart followed by a brief description of how each common ionization method works. It covers all of the commonly used ionization techniques as well as promising variants and aims to be a resource of first resort for organometallic chemists and analysts tackling a new problem.

Electronic and Steric Effects on the Reductive Elimination of Anionic Arylferrate(III) Complexes

Arylferrate(III) complexes Ph₃ FeR^- (R=para- and ortho-substituted aryl) are proposed as model systems for the in-depth investigation of reductive eliminations from organoiron(III) species. Electrospray ionization transfers the arylferrate complexes prepared in situ from solution into the gas phase, where mass selection ensures a well-defined population of reactant ions. Upon gas-phase fragmentation, the arylferrate complexes undergo reductive elimination of the cross-coupling product PhR as well as the homo-coupling product Ph₂ . The measured branching ratios between the two competing reaction channels are used to construct a Hammett plot, which shows that electron-donating aryl groups R favor the formation of the cross-coupling product. In this way, the complexes avoid the build-up of too much electron density at the iron center during the reductive elimination. ortho Substitution in R increases the fraction of the homo-coupling product, presumably by hindering the approach between the two aryl groups participating in the reductive elimination. The obtained mechanistic insight substantially advances our understanding of one of the central elementary steps of transition-metal-catalyzed cross-coupling reactions.

Periodic Trends Manifested through Gas-Phase Generation of Anions Such as [AlH4]-, [GaH4]-, [InH4]-, [SrH3]-, [BaH3]-, [Ba(0)(η2-O2CH)1]-, [Pb(0)H]-, [Bi(I)H2]-, and Bi- from Formates

Metal-hydride anions of main group elements, such as BaH₃ ^- and InH₄ ^-, were generated by dissociating formate adducts of the respective metal formates. Upon activation, these adducts fragment by formate-ion ejection or by decarboxylation. For adducts of alkali-metal formates, the formate-ion ejection is the preferred pathway, whereas for those of alkaline-earth and group 13-15 metals, the expulsion of CO₂ is the more favorable pathway. Decarboxylation is deemed to yield a metal-hydrogen bond presumably by a hydride transfer to the metal atom. For example, the decarboxylation of Al(η-OCOH)₄ ^- and Ga(η-OCOH)₄ ^- generated AlH₄ ^- and GaH₄ ^-, respectively. The initial fragment-ion with a H-M bond formed in this way from adducts of the heavier metals of group 13 (Ga, In, and Tl) undergo a unimolecular reductive elimination, ascribable to the "inert-pair" effect, to lower the metal-ion oxidation state from +3 to +1. As group 13 is descended, the tendency for this reductive elimination process increases. PbH₃ ^-, generated from the formate adduct of lead formate, reductively eliminated H₂ to form PbH^-, in which Pb is in oxidation state zero. In the energy-minimized structure [H-Pb(η²-H₂)]^-, proposed as an intermediate for the process, a H₂ molecule is coordinated with PbH^- as a dihapto ligand. The formate adducts of strontium and barium produce monoleptic ions such as [M(0)(η²-O₂CH)₁]^-, in which the formate ion is chelated to a neutral metal atom. The bismuth formate adduct undergoes a double reductive elimination process whereby the oxidation state of Bi is reduced from +3 to +1 and then to -1. Upon activation, the initially formed [H-Bi-H]^- ion transforms to an anionic η²-H₂ complex, which eliminates dihydrogen to form the bismuthide anion (Bi^-).

A Unique (3+2) Annulation Reaction between Meldrum's Acid and Nitrones: Mechanistic Insight by ESI-IMS-MS and DFT Studies

The fragile intermediates of the domino process leading to an isoxazolidin-5-one, triggered by unique reactivity between Meldrum's acid and an N-benzyl nitrone in the presence of a Brønsted base, were determined thanks to the softness and accuracy of electrospray ionization mass spectrometry coupled to ion mobility spectrometry (ESI-IMS-MS). The combined DFT study shed light on the overall organocatalytic sequence that starts with a stepwise (3+2) annulation reaction that is followed by a decarboxylative protonation sequence encompassing a stereoselective pathway issue.

Hydrogen Tunneling above Room Temperature Evidenced by Infrared Ion Spectroscopy

While hydrogen tunneling at elevated temperatures has, for instance, often been postulated in biochemical processes, spectroscopic proof is thus far limited to cryogenic conditions, under which thermal reactivity is negligible. We report spectroscopic evidence for H-tunneling in the gas phase at temperatures around 320-350 K observed in the isomerization reaction of a hydroxycarbene into an aldehyde. The charge-tagged carbene was generated in situ in a tandem mass spectrometer by decarboxylation of oxo[4-(trimethylammonio)phenyl]acetic acid upon collision induced dissociation. All ion structures involved are characterized by infrared ion spectroscopy and quantum chemical calculations. The charge-tagged phenylhydroxycarbene undergoes a 1,2-H-shift to the corresponding aldehyde with an half-life of about 10 s, evidenced by isomer-selective two-color (IR-IR) spectroscopy. In contrast, the deuterated (OD) carbene analogue showed much reduced 1,2-D-shift reactivity with an estimated half-life of at least 200 s under the experimental conditions, and provides clear evidence for hydrogen atom tunneling in the H-isotopologue. This is the first spectroscopic confirmation of hydrogen atom tunneling governing 1,2-H-shift reactions at noncryogenic temperatures, which is of broad significance for a range of (bio)chemical processes, including enzymatic transformations and organocatalysis.