Application of a biodegradable poly(butylene adipate-co-terephthalate) membrane for phenol pervaporation recovery

In the field of membrane separation, the environmental concerns caused by spent membranes are becoming increasingly serious, which contradicts the concept of sustainable development. Based on this, a biodegradable poly(butylene adipate-co-terephthalate) (PBAT) membrane was used for the first time in the pervaporation separation of phenol, a high boiling point organic compound (HBOC). By using the PBAT membrane, outstanding separation efficiency was achieved, and environmental pollution and disposal issues were also avoided. The separation process and mechanism of the PBAT membrane were systematically studied through the experiment together with molecular dynamics (MD) simulation. The swelling experiment and intermolecular interaction energy calculation demonstrated that the PBAT membrane had a strong affinity for phenol. Further simulation concluded that higher phenol concentration increased the number of hydrogen bonds so that the membrane was more greatly swollen. Meanwhile, the simulations on the adsorption, diffusion and permeation predicted that the PBAT membrane had excellent separation performance for phenol. Besides MD simulation, the influences of feed concentration and temperature on pervaporation performance were also investigated by experiment. The results showed that the flux of each component increased with the feed concentration. This phenomenon was attributed to the preferential adsorption of phenol by the PBAT membrane, which resulted in large free volumes and cavities within the membrane, accelerating the diffusion of molecules. In addition, it was found that the optimal operating temperature was 333 K with the best separation performance. This study confirms that the biodegradable PBAT membrane is valuable for the recovery of high boiling point organic compounds (HBOCs) such as phenol.

Improving the anti-fouling property and permeate flux of hollow fiber composite nanofiltration membrane using β-cyclodextrin

Hollow fiber composite NF membranes with improved anti-fouling property and water flux were prepared via interfacial polymerizationand layer-by-layer method using polyethylenimine (PEI), isophthaloyl dichloride (IPC), and β-cyclodextrin (β-CD). The chemical structures and the morphologies of the resultant NF membranes were characterized by attenuated total reflectance-fourier transform infrared (ATR-FTIR) spectroscopy and scanning electron microscopy (SEM). The effects of β-CD concentration on membrane morphologies, nanofiltration performances, surface hydrophilicities and anti-fouling properties were investigated. It was found that the permeate flux increased with increasing the β-CD concentration, and no decline of rejection was observed. The results showed that the introduction of β-CD improved surface hydrophilicities and anti-fouling performances of composite hollow fiber NF membranes. The water contact angles decreased from 61.3° to 23° within creasing the concentration of β-CD from 0 to 2.0 wt.%. The resultant hollow fiber composite NF membrane showed an excellent anti-fouling property with the flux recovery ratio of 97.6%, which was much better than that of the original polyamide (PA) NF membranes.