Endowing 2,6-bis-triazolyl-pyridine of poor extraction with superior efficiency for actinide/lanthanide separation at high acidity by anchoring to a macrocyclic scaffold

Exploring nitrogen-containing extractants for recovering hazardous minor actinides that are workable in solutions of high acidity has been a challenge in nuclear waste treatment. Herein, we report our findings that 2,6-bis-triazolyl-pyridine (PyTri), which is ineffective as a hydrophobic ligand for minor actinide separation, turns into an excellent extractant that exhibits unexpectedly high efficiency and selectivity (SF_Am/Eu = 172, 1 M HNO₃) when attaching to pillar[5]arene platform. Surprisingly, the distribution ratio of Am(III) (D_Am) is 4300 times higher than that of the acyclic PyTri ligand. The solvent extraction performance of this pillar[5]arene-achored PyTri not only far exceeds the best known pillar[5]arene ligands reported to date, but also stays comparable to other reported outstanding extractants. Slope analysis indicates that each P[5]A-PyTri can bind two metal ions, which is further corroborated by spectroscopic characterizations. Thermodynamic studies imply that the extraction process is exothermic and spontaneous in nature. Complexation investigation via EXAFS technique and DFT calculations strongly suggest that each Eu(III) ion is coordinated to three PyTri arms through a nine-coordination mode. This work provides a N-donor extractant that can operate at high acidity for minor actinide partitioning and implicates a promising approach for transforming poor extractants into superior ones.

A review of the alpha radiolysis of extractants for actinide lanthanide separation in spent nuclear fuel reprocessing

Radiation stability is one of the key properties to enable the efficient use of extractants in spent nuclear fuel with high radioactivity. The last several decades have witnessed a rapid progress in the radiation chemistry of extractants. A variety of studies and reviews pertinent to the radiation stability of extractants have been published. However, a thorough summary for the alpha radiolysis results of extractants is not available. In this review, we survey the development of alpha radiolysis of extractants for actinide lanthanide separation and compare their radiolysis behaviors induced by alpha particles and gamma rays. The discussion of alpha radiolysis of extractants is divided into three parts according to the functional groups of extractants (i.e., phosphine oxide, amide and bis-triazinyl bipyridines). Given the importance of radiation source to carry out alpha irradiation experiment, we first give a brief introduction to three practicable alpha radiation sources including alpha emitting isotopes, helium ion beam and reactor. We hope this review will provide useful information and unleash a broad palette of opportunities for researchers interested in radiation chemistry.

Highly efficient actinide(III)/lanthanide(III) separation by novel pillar[5]arene-based picolinamide ligands: A study on synthesis, solvent extraction and complexation

Selective extraction of highly radiotoxic actinides(III) is an important and challenging task in nuclear wastewater treatment. Many proposed ligands containing S or P atoms have drawbacks including high reagent consumption and possible secondary pollution after incineration. The present work reports five novel pillar[5]arene-based extractants that are anchored with picolinamide substituents of different electronic nature by varying spacer. These ligands reveal highly efficient separation of actinides(III) over lanthanides(III). Specifically, almost all of these ligands could extract Am(III) over Eu(III) selectively at around pH 3.0 (SF_Am/Eu>11) with fast extraction kinetics. Variation of the pyridine nitrogen basicity via changing para-substitution leads to an increase in the distribution ratios by a factor of over 300 times for Am(III) with an electron-withdrawing group compared to those with an electron donating group. Investigation of complexation mechanism by slope analysis, NMR, IR, EXAFS, and DFT techniques indicates that each ligand binds two metal ions by pyridine nitrogen and amide oxygen. Finally, these ligands do not show obvious decrease in both extraction and separation ability after being exposed to 250 kGy absorbed gamma radiation. These results demonstrate the potential application of pillar[5]arene-picolinamides for actinide(III) separation.

Selective Separation and Coordination of Europium(III) and Americium(III) by Bisdiglycolamide Ligands: Solvent Extraction, Spectroscopy, and DFT Calculations

Diglycolamide-based ligands have recently received increased attention due to their outstanding affinity for trivalent actinides and lanthanides. The structure optimization of the ligands, however, still remains a hot topic to achieve better extraction performance. In this work, we prepare and investigate three multidentate diglycolamide ligands for the selective separation of Eu(III) over Am(III) from a nitric acid solution to explore the effect on the extraction of alkyl groups on the nitrogen atoms in the center of the BisDGA ligands. The introduction of ethyl or isopropyl groups on the central nitrogen atoms greatly increased the distribution ratios of trivalent metal ions and enhanced the separation factor of Eu(III) over Am(III). The complexation behaviors of Eu(III) and Am(III) ions were studied by slope analyses, electrospray ionization mass spectrometry (ESI-MS), and extended X-ray absorption fine structure (EXAFS) spectroscopy. The results indicated that the trivalent metal ions were extracted as 1:2 and 1:3 complexes for all three BisDGA ligands during the extraction. Density functional theory (DFT) calculations verified the relevant experimental conclusion that the selectivity of THEE-BisDGA for Eu(III) is better than that for Am(III). The metal-DGA bonds in the ML₃(NO₃)₃ complexes seem to be stronger than those in ML₂(NO₃)₃ complexes.

Radiolytic stability of pillar[5]arene-based diglycolamides

Radiolytic stability of pillar[5]arene-based diglycolamides (P5DGAs) against gamma irradiation up to 1000 kGy adsorbed dose was studied. The results reveal the increase of radiation damage degree on P5DGAs with dose. The radiolysis products of P5DGAs including the gaseous and solid products were fully characterized by 1H NMR, HR-ESI-MS, GC, and HPLC techniques. It was found that the main radiolytic gas products of P5DGAs under argon are H2, N2, CO and gaseous hydrocarbons. The solid degradation products contain phenolic hydroxyl groups and secondary amine groups. In addition, solvent extraction toward Eu(III) was performed with P5DGAs, in which about 50% decrease on extraction efficiency was observed for irradiated P5DGAs with dose of 1000 kGy in comparison with the non-irradiated one. A radiolytic degradation pathway was also proposed based on the above results. This is the first time to investigate the radiolytic stability of neat P5DGAs and P5DGAs in molecular diluent in detail and provides useful information for further application of P5DGAs in practical applications for spent fuel reprocessing.

Effect of ionic liquid on the extraction of uranium with pillar[5]arene-based phosphine oxide from nitric acid solutions

The extraction of U(VI) from aqueous nitric acid solutions with pillar[5]arene-based phosphine oxide (L) and [C8mim][NTf2] ionic liquid dissolved in 1,2-dichloroethane was explored. A great positive impact in this system was observed. The effect of IL concentration in the organic phase and HNO3 concentration in the aqueous phase is considered. The distribution ratios of U(VI) were significantly enhanced upon adding a small amount of ionic liquid as compared with organic diluent. The extraction system was also examined for its ability towards extraction of lanthanides and Th4+. The results revealed higher separation factors towards UO2 2+ over Th4+ in the presence of ionic liquid compared with organic diluent. Other factors such as C8mim+ and NTf2 − have also been considered. This extraction system has shorter equilibrium time as compared with in IL diluent. Stripping experiments showed almost quantitative back extraction of UO2 2+ within two stages. With high selectivity towards UO2 2+ and efficient back extraction, this new POP5A-ionic liquid-organic diluent system shows promise for future application of uranium recovery.

Pillararenes as macrocyclic hosts: a rising star in metal ion separation

Pillararenes are macrocyclic oligomers of alkoxybenzene akin to calixarenes but tethered at the 2,5-positions via methylene bridges. Benefiting from their unique pillar-shaped architecture favorable for diverse functionalization and versatile host-guest properties, pillararenes decorated with chelating groups worked excellently as supporting platforms to construct extractants or adsorbents for metal ion separation. This feature article provides a detailed summary of pillararenes in Ln/An separation by liquid-liquid extraction and heavy metal separation by solid-liquid extraction. The preorganization effect of the rigid pillararene framework has a profound impact on the extraction of metal ions, and a unique extraction mechanism is observed when employing ionic liquids as solvents. The rich host-guest chemistry of pillararenes enables construction of a wide variety of supramolecular materials as metal ion adsorbents. We also discuss the differences between pillararenes and several well-known macrocycles, with a focus on the metal-ligand coordination and its influencing factors. We hope this review will provide useful information and unleash new opportunities in this field.