Natural Radionuclides in Bottled Mineral Waters Consumed in Turkey and Their Contribution to Radiation Dose

Bottled natural mineral water (BMW) consumption in Turkey is increasing every year. Depending on the local geology from which the water is extracted, BMW could be enhanced with natural radionuclides. In this study, the activity concentrations of natural radionuclides in 58 BMW samples of 25 different brands marketed in Turkey were measured using a γ-ray spectrometer with high-purity germanium (HPGe) detector. The average activity concentrations of ²²⁶Ra, ²²⁸Ra, and ⁴⁰K in BMW samples were found as 0.4, 0.5, and 4.3 Bq/L, respectively. The activity concentrations of ²²⁸Ra exceeded the WHO-recommended maximum permissible limit of 0.1 Bq/L for drinking water. The annual effective dose (AED) and excess lifetime cancer risk (LCR) caused by the ingestion of each BMW sample were estimated for adults to assess radiological risks using two different scenarios based on BMW consumption rates (150 and 13 L/y). All estimated total AEDs, except for two samples, were below the guidance dose level of 100 μSv/y recommended by the World Health Organization (WHO) and Turkish regulations for drinking water. For all BMW brands, ²²⁸Ra was found as the main contributor to the AEDs. The LCR values were lower than the acceptable value of 10^-3 for radiological risks.

Evaluation of natural radioactivity levels and potential radiological hazards of common building materials utilized in Mediterranean region, Turkey

Radiometric measurement of building materials is very important to assess the internal and external exposure caused by the ionizing radiation emitted from terrestrial radionuclides in building materials. The activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K in fifty-eight samples of fifteen different structural and covering building materials commonly used in Osmaniye province located in the Mediterranean region of Turkey were measured by using gamma-ray spectroscopy. The activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K varied from 2.5 ± 0.1 (marble) to 145.7 ± 4.4 (clay brick), 1.3 ± 0.1 (marble) to 154.3 ± 4.1 (marble), and 8.6 ± 0.2 (sand) to 1044.1 ± 70.3 (granite), respectively. Radiological parameters (activity concentration index, alpha index, indoor absorbed gamma dose rate and the corresponding annual effective dose rate, and excess lifetime cancer risk) were estimated to evaluate the health hazards associated with these building materials. Since the estimated values of these parameters are within the recommended safety limits or criteria values, the use of the studied building materials in the construction of dwellings can be considered to be safe for the residents of the region.

Radiometric analysis of micas used in many industries and evaluation of radiological hazards

Mica group minerals have been utilized in various industries such as paint, cement, rubber, plastic, paper, automotive, cosmetics, textile, etc. due to their unique electrical, thermal, and mechanical properties. In this study, the radiometric properties of 58 mica samples collected from three quarries operated commercially in Turkey were investigated using gamma-ray spectroscopy with an HPGe detector. The average activity concentrations of 226Ra, 232Th, and 40K analyzed in mica samples were found as 12, 44, and 2763 Bq kg−1, respectively. The radon emanation coefficient and radon mass exhalation rate of mica samples varied from 4 to 22% with an average of 10% and 0.4–5.9 µBq kg−1 s−1 with an average of 2.6 µBq kg−1 s−1, respectively. The radiological hazard caused by the utilization of mica samples as raw materials in the cement and concrete industry was evaluated for adults by calculating the gamma index and annual effective dose due to external exposure indoor. The study results revealed that there are no significant radiological hazards associated with the utilization of mica samples as building raw materials.