Preparation, biological evaluation and radiolabeling of [99mTc]-technetium tricarbonyl procainamide as a tracer for heart imaging in mice

This study focuses on the synthesis and preliminary bio-evaluation of [99mTc]-technetium tricarbonyl procainamide ([99mTc]-technetium tricarbony PA) as a viable cardiac imaging agent. The compound, [99mTc]-technetium tricarbony PA, was synthesized by labelling procainamide with a [99mTc]-technetium tricarbonyl core, yielding a high radiochemical yield and radiochemical purity of 98%. Under optimal circumstances, high radiochemical yield and purity were obtained utilizing [99mTc]-technetium tricarbonyl core within 30 min of incubation at pH 9, 200 µg substrate concentration, and 100 °C reaction temperature. The heart showed a high absorption of 32.39 ± 0.88% of the injected dose/g organ (ID/g), confirming the suitability of [99mTc]-technetium tricarbonyl PA as a viable complex for heart imaging.

Enhancement of the thermal and physicochemical properties of styrene butadiene rubber composite foam using nanoparticle fillers and electron beam radiation

This study investigates the physicochemical and thermal properties of styrene–butadiene rubber (SBR) nanocomposite foam. Nano-calcium carbonate (CaCO3) was prepared from eggshells (ESs) waste. Sponge rubber nanocomposites were prepared and were irradiated by electron beam (EB) radiation at 25, 75, and 150 kGy. Their physicochemical properties, including foam density, compression set (CS), hardness, abrasion loss, and expansion ratio, and their thermal stability were investigated. The physicochemical properties were enhanced by adding 2.5 phr of a foaming agent. Among the composites examined, the foam composites containing nano-CaCO3 had the lowest CS, abrasion loss, and expansion ratio and the highest hardness and foam density. The results confirmed that the thermal stability was improved by incorporating nano-CaCO3 into the SBR foam and as the radiation dose increased. The sponge containing nanoclay demonstrated an intermediate behavior, whereas that with CaCO3 nanoparticles showed low average cell diameter and size and high cell wall thickness. The radiation process enhanced the foam density, CS, abrasion loss, hardness, and thermal property of the developed nanocomposites by inducing the formation of intermolecular crosslinks within the composite matrix. The results showed that physicochemical properties improved by increasing the radiation dose at 25 kGy.

Radioiodination of balsalazide, bioevaluation, and characterization as a highly selective radiotracer for imaging of ulcerative colitis in mice

This work focuses on tracking ulcerative colitis in mice. High labeling yield and radiochemical purity were achieved for the formation of a [^125/131 I]balsalazide radiotracer at optimum conditions of oxidizing agent content (chloramines-T [Ch-T], 75 μg), substrate amount (100 μg), pH of reaction mixture (6), reaction time (30 min), and temperature (37°C), using radioactive iodine-125 (200-450 MBq). The radiolabeled compound, [^125/131 I]balsalazide, was stable in serum and saline solution during 24 h. Balsalazide is acting as a peroxisome proliferator-activated receptor (PPARγ). Biodistribution studies were carried in normal and ulcerated colon mice. High uptake of 75 ± 1.90% injected dose/g organ (ID/g) observed in ulcerated mice confirmed the suitability of [¹³¹ I]balsalazide as a novel radiotracer for ulcerative colitis imaging in mice.