Gasoil removal from aqueous solution using magnetic metal-organic framework adsorbent based on the cellulosic fibrous of Prosopis farcta plant

Recently, the leakage of Gasoil and other petroleum substances into the seas, surface water, and wastewater has become a global problem; therefore, providing a solution to remove these pollutants seems vital. In the current research, we investigated the removal of floating Gasoil from aqueous solutions. First, the magnetic metal-organic framework was prepared as a new adsorbent based on the cellulosic fibrous of the Prosopis farcta plant (magnetic- cellulose@MIL-53(Fe) carbon aerogel). Using design of experiment, the effect of parameters pH, Gasoil concentration, and adsorbent weight on Gasoil removal were investigated. The adsorbent prepared under optimal parameters can remove 100% floating Gasoil from the aqueous solution. The adsorption capacity of the magnetic- cellulose@MIL-53 (Fe) carbon aerogel is 7.48 g.g-1, which is almost 100 times more than other Fe-based adsorbents. The study of the effect of time showed that the adsorption of Gasoil by the adsorbent is not dependent on time. Gasoil adsorption on magnetic- cellulose@MIL-53(Fe) carbon aerogel follows the Freundlich isotherm with a correlation coefficient of 0.9933. Thermodynamic factors Gibbs free energy, enthalpy, and entropy changes have been calculated. Accordingly, magnetic- cellulose @MIL-53(Fe) carbon aerogel has rapid separation and high stability, and it could be used as a good adsorbent to remove Gasoil from an aqueous solution. With good cycling stability of 86% retention of the initial adsorption value after ten adsorption/desorption cycles.

Synthesis of Fe3O4 nanoparticles @Trioctylmethylammonium thiosalicylat (TOMATS) as a new magnetic nanoadsorbent for adsorption of ciprofloxacin in aqueous solution

The aim of this research was to investigate ciprofloxacin (CIP) removal efficiency from aqueous solutions by using Fe3O4 nanoparticles @Trioctylmethylammonium thiosalicylat Ionic liquid (Fe3O4 NP@ TOMATS IL) as a new magnetic nanoadsorbent. The adsorbent was characterized by field emission scanning electron microscope-energy dispersive spectroscopy (FESEM-EDS), mapping, Fourier transform infrared spectroscopy (FT-IR), the Brunauer–Emmett–Teller (BET), X-ray powder diffraction (XRD). The effects of solution pH, adsorbent dose, contact time, initial CIP concentration, and temperature on CIP removal were also investigated. In optimal conditions such as pH = 5.6, CIP concentration = 30 mg/L, adsorbent dose = 0.15 g, temperature = 30 °C, contact time = 90 min, the removal efficiency in synthetic and real wastewater were obtained 87 and 73%, respectively. Batch experiments were carried out to study the sorption Kinetics, thermodynamics, and equilibrium isotherms of CIP with magnetic nanoadsorbent. The results show that all of the above factors influence CIP removal. The Langmuir adsorption isotherm fits the adsorption process well, with the pseudo second-order model describing the adsorption kinetics accurately. The thermodynamic parameters indicate that adsorption is mainly physical adsorption. Recycling experiments revealed that the behavior of adsorbent is maintained after recycling for four times.

Charcoal Prepared from Bougainvillea spectabilis Leaves as Low Cost Adsorbent: Kinetic and Equilibrium Studies for Removal of Iron from Aqueous Solution

Biosorption is one of the effective technique for removal of metals from aqueous solutions/industrial effluents. Present work is aimed to use low cost and ecofriendly material to remove the iron metal from aqueous solution which could possibly be used at industrial level. For this purpose, Bougainvillea spectabilis leaves were used for the production of charcoal. This charcoal was activated using HCl and HNO3. The AC shows promising efficiency for the adsorption of Fe II as a function of medium pH, contact time, adsorbent dose and temperature. Maximum adsorption was observed with 0.5–0.9 g adsorbent dose, 30 min contact time and at pH 3. Adsorption showed independence of temperature in the range of 30–70 °C. Among, Freundlich and Langmuir isotherms, the adsorbate followed Langmuir isothermal model. Among kinetics models, adsorbate followed pseudo second order kinetic model with R2 values of 0.9985 and 0.9996 for HCl treated and HNO3 treated AC, respectively. These data suggest that AC synthesized from Bougainvillea leaves proved to be an excellent adsorbent for the removal of iron metal from aqueous solution.