Metered-dose inhalers: actuators old and new

How to engineer aerosol particle properties and biopharmaceutical performance of propellant inhalers

Given the environmental compulsion to reformulate pressurised metered dose inhalers (pMDI) using new propellants with lower global warming potential, this study investigated how non-volatile excipients can be used to engineer aerosol particle microphysics and drug release. The dynamics of change in particle size, wetting and physical state were measured for single particles (glycerol/ethanol/beclomethasone dipropionate; BDP) in the aerosol phase at different relative humidity (RH) using an electrodynamic balance. BDP dissolution rates were compared for aerosols from pMDI containing different ratios of BDP:glycerol or BDP:isopropyl myristate (IPM). In 45 % RH, ethanol loss was followed by evaporation of condensed water to generate spherical particles with solid inclusions or compact irregular-shaped solid particles, according to the presence or absence of glycerol. In RH > 95 %, condensed water did not evaporate and BDP formed solid inclusions in water/glycerol or water droplets. Varying the non-volatile component, 0-50 % w/w, in pMDI resulted in a concentration-dependent 4-8-fold reduction in BDP dissolution rate. These findings demonstrate that non-volatile excipients provide a means of engineering aerosol properties and, modifying the rate of drug release from aerosol medicines. We also demonstrated differences between particles formed in vitro in ambient humidity versus higher humidity, more like that encountered during oral inhalation.

Inhalation device requirements for patients' inhalation maneuvers

BACKGROUND

Inhaled drugs are the mainstay of treatment for lung diseases such as asthma and chronic obstructive pulmonary disease. However, failure to use inhalation devices correctly can lead to a poorly controlled status. A vast number of inhalation devices exist and each device has specific requirements to achieve optimum inhalation of the drug. Currently, there is no overview of inhalation requirements considering all devices. This article presents a review of the literature on different inhalation device requirements and incorporates the data into a new inhalation flow algorithm.

METHODS

Data from literature on commercially available inhalation devices were evaluated and parameters, such as inhalation flow rate, flow acceleration, inhalation volume, and inspiration time assessed for the required inhalation maneuver specific to the device. All agreed upon data points were used to develop an inhalation flow algorithm.

RESULTS

The literature analysis revealed availability of robust data for the required inhalation flow characteristics for most devices and thus for the development of an algorithm. For those devices for which these parameters are not published, the minimum required flow criteria were defined based on published data regarding individual aspects of aerosol quality.

CONCLUSIONS

This review provides an overview of inhalation devices available on the market regarding requirements for an acceptable inhalation maneuver and shows which goals should be achieved in terms of inhalation flows. The presented algorithm can be used to develop a new computer based measurement system which could help to test and train patients' individual inhalation maneuvers with their inhalation devices.

The evolution of spacers and valved holding chambers

Spacers and valved holding chambers (VHCs) are pressurized metered dose inhaler (pMDI) accessory devices, designed to overcome problems that patients commonly experience when administering aerosol via a pMDI. Spacers were developed in direct response to patient-related issues with pMDI technique, particularly, poor coordination between actuation and inhalation, and local side-effects arising from oropharyngeal deposition. Current clinical guidelines indicate the need for widespread prescription and use of spacers, but, despite their apparent ubiquity, the devices themselves are, unfortunately, all too commonly "disused" by patients. An understanding of the background from which spacers developed, and the key factors influencing the optimization of the spacer and the later VHC, is crucial to developing an appreciation of the potential of these devices, both contemporary and future, for improving the delivery of pressurized aerosols to patients. This review, informed by a full patent search and an extensive scientific literature review, takes into account the clinical and laboratory evidence, commercial developments, and the sometimes serendipitous details of scientific anecdotes to form a comprehensive perspective on the evolution of spacers, from their origins, in the early days of the pMDI, up to the present day.

Factors affecting the stability and performance of ipratropium bromide; fenoterol hydrobromide pressurized-metered dose inhalers

The aim of the study was to investigate the factors affecting the stability and performance of ipratropium bromide and fenoterol hydrobromide in a pressurized-metered dose inhaler (pMDI). A factorial design was applied to investigate the effects of three parameters (propellant, water, and ethanol) on the performance of 27 designed formulations of a solution-based pMDI. The formulations that contained a hydrofluoroalkane (HFA) propellant lower than 72% v/v and an ethanol concentration higher than 27% v/v remained as clear solutions. Nine formulations that contained the HFA propellant higher than 74% v/v precipitated. The results indicated that it was not only the HFA propellant content of the formulations that was related to the formulation instability but also ethanol content. Only six formulations from the 18 formulations, that did not precipitate, produced drug contents that were within the acceptable range (80-120%). These six formulations generated aerosols with mass median aerodynamic diameters (MMAD) of approximately 2 μm with a fine particle fraction (FPF; particle size, <6.4 μm) between 45% and 52%. The MMAD and FPF did not change significantly after 6 months of storage (P > 0.05).

Ultrasonic nebulization platforms for pulmonary drug delivery

IMPORTANCE OF THE FIELD

Since the 1950s, ultrasonic nebulizers have played an important role in pulmonary drug delivery. As the process in which aerosol droplets are generated is independent and does not require breath-actuation, ultrasonic nebulizers, in principle, offer the potential for instantaneously fine-tuning the dose administered to the specific requirements of a patient, taking into account the patient's breathing pattern, physiological profile and disease state. Nevertheless, owing to the difficulties and limitations associated with conventional designs and technologies, ultrasonic nebulizers have never been widely adopted, and have in recent years been in a state of decline.

AREAS COVERED IN THIS REVIEW

An overview is provided on the advances in new miniature ultrasonic nebulization platforms in which large increases in lung dose efficiency have been reported.

WHAT THE READER WILL GAIN

In addition to a discussion of the underlying mechanisms governing ultrasonic nebulization, in which there appears to be widely differing views, the advantages and shortcomings of conventional ultrasonic nebulization technology are reviewed and advanced state-of-the-art technologies that have been developed recently are discussed.

TAKE HOME MESSAGE

Recent advances in ultrasonic nebulization technology demonstrate significant potential for the development of smart, portable inhalation therapy platforms for the future. Nevertheless, there remain considerable challenges that need to be addressed before such personalized delivery systems can be realized. These have to be addressed across the spectrum from fundamental physics through to in vivo device testing and dealing with the relevant regulatory framework.

Advancements in dry powder delivery to the lung

The dry powder inhaler (DPI) has become widely known as a very attractive platform for drug delivery. Many patients have traditionally used DPIs to treat asthma and chronic obstructive pulmonary disease. Recently, the development of new DPIs for delivering therapeutic proteins such as insulin has been accelerated by patient demands, and innovative research. The current market for DPIs has over 20 devices presently in use, and many devices under development for delivering a variety of therapeutic agents. DPIs are recognized as suitable alternatives to pressurized metered dose inhalers for some patients, but the performance of DPI devices may vary according to a given patient's physiological condition. This variation can be associated with the necessary powder dispersion mechanism of each device. As such, much interest has focused on the development of efficient powder dispersion mechanisms, as this effectively minimizes the influence of interpatient variability. This article reviews DPI devices currently available, advantages of newly developed devices, outlines some requirements for future device design.