The color masking ability of a zirconia ceramic on the substrates with different values

Interdisciplinary Approach to Retreatment of a Full-Mouth Rehabilitation: Horizontal Preparations, Vertical Dimension of Occlusion Increase, and Mucogingival Surgery in a Tetracycline-Stained Dentition

OBJECTIVE

This case report presents the interdisciplinary retreatment of a patient with a worn full-mouth rehabilitation using defect-oriented restorations, horizontal preparations, and vertical dimension of occlusion (VDO) increase.

CLINICAL CONSIDERATIONS

A 58-year-old woman with a previous full-mouth rehabilitation presented with worn dentition, loss of VDO, and reduced posterior support. Examination revealed signs of parafunctional habits, tetracycline-stained teeth, and compromised aesthetics with exposed discolored teeth and open embrasure spaces. Additionally, the veneers showed wear and ceramic chipping. The retreatment started with a diagnostic phase, including a wax-up and mock-up to guide the treatment plan. Mucogingival surgery was performed to correct gingival recession according to the restorative margins established by the mock-up. The full-mouth rehabilitation involved increasing the VDO through anterior crowns and veneers, posterior overlays, and dental implant restoration. Horizontal chamfer preparations ensured sufficient thickness for the ceramic material, allowing for durable adhesive restorations.

CONCLUSIONS

The interdisciplinary approach, combining diagnostic, surgical, and prosthetic phases, enabled the successful retreatment of this complex case, restoring function and aesthetics. A 2-year follow-up confirmed the stability and positive outcomes of the rehabilitated dentition.

CLINICAL SIGNIFICANCE

This interdisciplinary approach provides an effective strategy for managing complex full-mouth rehabilitations, integrating aesthetics, function, and periodontal health through defect-oriented preparation techniques.

Optical properties of zirconia-reinforced lithium silicate veneers obtained with CAD/CAM milling and hot-pressing techniques: a comparative in vitro study

Background and aims

Dental veneers have become increasingly required among patients, but little is known about the optical properties of veneers obtained from the same ceramic material through different processing techniques.

Methods

In this study we compared the translucency and the opalescence parameters of zirconia-reinforced lithium silicate (ZLS) veneers restorations fabricated through CAD/CAM milling and hot-pressing techniques on the upper central incisor. Eighty specimens divided into 8 groups (n=10) were sectioned (Celtra Duo) and heat pressed (Celtra Press) to obtain 0.8 mm thickness. The optical parameters were calculated from the color difference against different backgrounds. Analysis of variance, one way ANOVA and post-hoc multiple comparison tests were used to evaluate and compare the optical properties of the same material, with a significance level of p < 0.05.

Results

The processing method had significant effect on optical parameters. Celtra Duo HT proved to be the material with the highest transparency degree. The hot-pressing technique led to higher opacity than CAD/CAM milling technique.

Conclusions

For a bio-mimetic aesthetic prosthetic restoration, the ceramic materials must have the same translucency and opacity as the real tooth. The results of this study revealed that high translucency ZLS obtained through hot pressing technique was the material of choice, as it fulfilled these requirements.

Masking Ability of Monolithic and Layered Zirconia Crowns on Discolored Substrates

There is scarce information on the colorimetric behavior of monolithic and layered zirconia crowns in combination with various abutment colors. This study evaluated the masking ability on discolored substrates of monolithic and layered zirconia crowns. Anterior crowns were fabricated using 3Y-TZP zirconia and layering ceramic and divided into three groups: monolithic (ML), bi-layer (BL), and tri-layer (TL). The crowns were placed over eleven substrates (ND1-ND9, zirconia, metal), and CIE L*, a*, b*, C*, and h° color coordinates were measured in the cervical, middle, and incisal areas with a spectrophotometer. Masking ability was calculated using the color difference formula, and values were interpreted according to the perceptibility and acceptability thresholds. Data were analyzed statistically (α = 0.001). The L* coordinate was not significantly different between BL and TL crowns, regardless of the measurement area or substrate (p ≥ 0.001). In the middle area, the L* coordinate of the ML group was statistically different from the BL and TL groups only for zirconia and metal substrates, while in the incisal area, only for ND7 and metal substrates. The a* coordinate was significantly different between the ML and layered crowns for all measurement areas and substrates (except zirconia). The b* and C* coordinates differed significantly between the groups only in the cervical area (p < 0.001). The ML crown had better masking ability than the BL and TL crowns. However, the color differences for ML crowns were below the acceptability threshold for ND2, ND3, and ND7 substrates in the cervical and middle areas and below perceptibility threshold only for the incisal area. The lowest masking ability of the crowns was found for ND9 and metal substrates in all measurement areas.

Influence of manufacturing technique on the color of zirconia restorations: Monolithic versus layered crowns

OBJECTIVES

The study aimed to compare the color of monolithic and layered zirconia crowns fabricated using different brands in the cervical, middle, and incisal areas.

MATERIALS AND METHODS

A total of 45 crowns were fabricated from three brands (Katana, Nacera, Cercon) using three methods (monolithic = ML (n=5), cut-back + enamel = BL (n=5), cut-back + dentin + enamel = TL (n=5)). CIE L*, a* b*, C*, h° color coordinates were recorded with a dental spectrophotometer in cervical, middle, and incisal areas. Color differences between manufacturing techniques, tooth areas, and brands were calculated using the CIEDE2000(1:1:1) formula, and the values were compared to the perceptibility (PT₀₀ ) and acceptability thresholds (AT₀₀ ). Comparisons between color coordinates were analyzed statistically (Kruskal-Wallis and Mann-Whitney U tests, p < 0.001).

RESULTS

Significant differences were found between CIE L*, a*, b*, C*, h° coordinates of the zirconia crowns (p < 0.001), generally. The lowest color differences were obtained between BL and TL crowns in cervical and middle areas. Color differences between cervical and middle areas were mostly below PT₀₀ . An acceptable color difference was found between Katana and Cercon crowns.

CONCLUSIONS

The manufacturing technique and the brand influenced the color of zirconia crowns. Also, the color of the crowns varied from cervical to incisal.

CLINICAL SIGNIFICANCE

Reproducing the optical properties of teeth with ceramic crowns might be challenging, given the differences in the internal configuration of the enamel and dentine, as well as their complex behavior when interacting with light. When deciding whether to fabricate a monolithic crown in translucent zirconia or improve its appearance by layering with more translucent glass-ceramic, the clinicians and dental technicians must be aware of these procedures' effect on the final color of the restorations.

Masking Abilities of Dental Cad/Cam Resin Composite Materials Related to Substrate and Luting Material

An outstanding treatment challenge related to aesthetic monolithic materials is to mask discolored substrates in aesthetic areas. The purpose of the study is to evaluate the substrate masking ability of different resin composite materials and the influence of their association with luting agents and substrates. Five types of 2M2 HT (high translucency) resin composite materials were selected: Vita Enamic [E] and four types of nanoparticle-filled composites Lava Ultimate [L], Cerasmart [C], Shofu HC [S], and Hyramic [H]. Resin composite Vita VM LC with different shades was used for the substrates: 2M2, 3M2, and CP2. Variolink Esthetic Try-inpastes neutral, light+, and warm+ colors were chosen to simulate the luting agent color. Optical parameters (TP (translucency), CR (contrast ratio), and OP (opalesce)) and color differences ΔE (chromatic difference) were calculated. Statistical analyses were performed to evaluate the comparisons between the groups and establish correlations. TP average values for all materials were in the range of 21.49–24.53. OP average values were in the rage of 6.31–7.85. OP is moderate positive correlated to TP and CR is negative and strong correlated to TP. Related to materials, average color changes decrease as following: E > H > C > L > S. Referring to the tryin material, warm colors induce marked color changes of the restoration. The differences of the color changes determined by all studied substrates are significant. For the final aesthetic aspect of the restoration, it is essential to consider the underlying dental structure, luting agent, and restoration material as a whole unit. The masking ability of the investigated resin matrix ceramic materials materials shows differences, the best behavior demonstrated Shofu HC and Lava Ultimate. Marked color changes are related to high chroma substrates. For substrates with a darker color, the association with warm try-in pastes lead to marked color changes, but with neutral and light try-in pastes at most perceivable.

Effects of CAD/CAM ceramics and thicknesses on translucency and color masking of substrates

OBJECTIVE

To compare the translucency and masking of zirconia-reinforced lithium silicate with lithium disilicate glass-ceramic and hybrid composite.

MATERIALS AND METHODS

One hundred and twenty disc-shaped specimens were fabricated using Enamic, Celtra Duo, IPS E.max CAD, and Suprinity. Twelve groups were prepared according to material type and thickness (0.5, 1.0, and 1.5 mm). The specimens were tested over five substrates: composite resin-A3.5 shade (A3.5 control group), zirconia-A1 shade (ZR), nickel-chromium alloy (NC), black (B), and white (W). A spectrophotometer operating at wavelengths from 360 to 750 nm and a view-area size of 9.53 mm was used for color measurement.

RESULTS

Mean color difference values (ΔΕ) were found to be lowest in Suprinity and highest in IPS E.max. CAD. Color difference values were significantly related to substrate shade. The A3.5 substrate revealed the significantly lowest ΔΕ values of all the substrates (P = 0.05). Regarding the translucency parameters for ceramics of different thicknesses, a significant difference was observed among all groups except in Suprinity.

CONCLUSIONS

Different ceramic types with different thicknesses and substrate strongly affect translucency and masking.

CLINICAL SIGNIFICANCE

Fabricating durable aesthetic restorations that also meets patients' expectations is among the most significant challenges in dentistry. With high demand for more natural restorations, ceramics based on computer-aided design (CAD) and computer-aided manufacture (CAM) became popular and exhibited excellent results. However, various factors such as abutment shade, luting cement color, and ceramic type, thickness, and translucency may affect the prosthesis shade. The objective of this study was to evaluate the effects of these factors on the final shades of CAD/CAM-based ceramic restorations.

Experimental methodologies to evaluate the masking ability of dental materials: A systematic review

OBJECTIVE

To conduct a systematic review on the masking ability of discolored substrates, analyzing the capacity and quality of the response produced by the different methodologies and techniques applied to overcome this clinical challenge.

MATERIALS AND METHODS

The study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. The electronic search was conducted in MEDLINE/PubMed, Scopus and Web of Science databases, without date restriction. In vitro studies, written in English, applying different methodologies to evaluate masking ability were included. The variables of interest were: type, color and thickness of the restorative and/or cement material; use of pigments in the restorative material and/or cement; color of the substrate; and background color used for the evaluations.

RESULTS

Database search retrieved 307 eligible papers with a final inclusion of 47 published papers. Approximately 98% of the studies used ΔE, 36% used TP, and only 6% used CR to evaluate the masking ability of restorative materials.

CONCLUSIONS

The most appropriate methodology to evaluate the masking ability is using color difference equations (ΔE) associated with the perceptibility and acceptability thresholds.

CLINICAL SIGNIFICANCE

As different methodologies have been used to evaluate the masking ability of esthetic restorative materials on colored substrates, there is an urgent need to reach a consensus and propose a method, which is suggested by the present systematic review.

Masking of High-Translucency Zirconia for Various Cores

CLINICAL RELEVANCE

Various core materials with different shades affect the final color of high-translucency monolithic zirconia restorations. The blue core shows the greatest color difference in final zirconia restorations followed by metal, A3 dentin-shade resin core, and white core.

SUMMARY

The purpose of this study was to evaluate the masking ability of high-translucency monolithic zirconia for various core materials. A computer-aided design-computer-aided manufacturing system was used to design a zirconia disc with a diameter of 10 mm and a thickness of 1.0 mm. Four groups of cores (n=15 each) were fabricated with blue-colored dual-cure resin, white-colored dual-cure resin, A3 dentin-shade composite resin, and titanium block with 10-mm diameter and 5-mm thickness.Dual-cure, self-adhesive resin cement discs with a thickness of 25.0 ± 0.02 μm were fabricated. The color was measured using a handheld spectrophotometer. Color measurements of all specimens were performed on a white background. To assess the masking ability of zirconia, the difference between the values measured with zirconia on a white background and the values measured with zirconia on each of the four types of core material as a background with the cement specimens interposed (zirconia + cement + core) was determined. To enhance the optical connection between the specimens, distilled water was applied between each layer during each measurement.The results showed that the value of ΔE was highest for the blue core followed by metal, A3 dentin-shade resin core, and white-resin core. No significant differences were observed between the metal core and the A3 dentin-shade resin core or between the A3 dentin-shade resin core and the white core. The blue core had the significantly highest ΔE value based on Tukey's honest significant difference test.Different core materials affect the final color of high-translucency monolithic zirconia restorations. Thus, our study showed that the final color of high-translucency monolithic zirconia restorations could be affected by the type of core material used.

Influence of core color on final shade reproduction of zirconia crown in single central incisor situation - An in vivo study

Background

A lot of shaded zirconia blocks are being introduced into the market. Their effect on the final shade of the restoration is yet uncertain.

Material and Methods

Twenty-four zirconia crowns were fabricated for 8 patients who needed to restore a single maxillary central incisor, and divided into 3 groups according to the color and type of the zirconia (Zr) used (white Zr core, colored Zr core, and monolithic high translucency (ht) Zr crowns). Using Easyshade spectrophotometer, delta E color difference was calculated between fabricated crown and adjacent tooth. The ΔEs obtained were assessed based on 1.6 ΔE which represented the color difference that could not be detected by the human eye and considered clinically acceptable.

Results

No statistically significant values were found between the 3 groups related to different Zr color and type.

Conclusions

Within the limitations of this study, it could be concluded that the shade of the zirconia blank had no significant effect on the final color of the crown. This raises reasonable doubt about the necessity to use colored zirconia blanks or use of dip-in solutions. The clinical implications were that, there was no need to use colored zirconia cores to get more esthetically pleasing restorations with respect to color perception. The use of monolithic high translucent zirconia crowns gained the advantages of high translucency and color reproduction. Key words:Zirconia, easyshade, monolithic, spectrophotometer, delta E.

Effects of veneering porcelain thickness and background shade on the shade match of zirconia-based restorations

Background. Effects of veneering porcelain thickness and background shade on the shade match of zirconia-based restorations are unclear. The aim of this study was to evaluate the impacts of veneering porcelain thickness and background shade on the shade match of zirconia-based restorations.

Methods. Forty A2 shade veneered zirconia disk specimens (10 mm in diameter) were fabricated, with veneering porcelain thicknesses of 1.6, 1.8, 2.0 and 2.2 mm. Three backgrounds were made of A2 shade composite resin (A2), nickel-chromium alloy (NC) and amalgam (AM). The veneered zirconia specimens were placed on the backgrounds. CIELab values were measured with a spectrophotometer. ΔE values were measured to determine color differences between the specimens and the A2 VITA classical shade (target shade). ΔE values were compared with an acceptability threshold (ΔE=3.7). Repeated measures ANOVA, Bonferroni, and 1-sample t-test were used to analyze data (P<0.05).

Results. Mean ΔE values ranged between 1.9 and 5.0. The veneering porcelain thickness, the background shade and their interaction affected the ΔE (P<0.0001). The minimum veneering porcelain thickness for the shade match was 2 mm for NC and 1.8 mm for AM.

Conclusion. Veneering porcelain thickness and background shade affected the shade match of zirconia-based restorations. With dark-shaded backgrounds, the amount of veneering porcelain thickness needed for the shade match might be beyond acceptable clinical limits. Tooth-shaded backgrounds are esthetically advocated rather than dark-shaded backgrounds in zirconia-based restorations.