Relationships Between Height, Arm Length, and Leg Length on the Mechanics of the Conventional and High-Handle Hexagonal Bar Deadlift

Inter- and Intra-Rater Reliabilities of the Army Combat Fitness Test Three-Repetition Maximum Deadlift Event Among Raters of Varying Professional Experience

INTRODUCTION

The U.S. Army is updating the physical fitness assessment for soldiers to the six-event Army Combat Fitness Test (ACFT). A paucity of data regarding the ACFT maximum deadlift (MDL) event, especially in military populations, has increased concern over the objectivity of the test. The reliability of scoring the MDL has not been established. It is unknown if grader professional experience impacts the reliability of scoring, and if so, what level of experience is required for reliable assessment. Performance and assessment of the MDL could impact military occupational selection, promotion, and retention within the Army. The purposes of this study were to determine the inter- and intra-rater reliabilities of raters with varying degrees of professional experience on scoring the MDL and to determine the relationships between load lifted, overall lift success, sex, and body mass index (BMI).

METHODS

The design is a reliability study. Approval was granted by the Naval Medical Center-Portsmouth Institutional Review Board. Fifty-five healthy soldiers and cadets from the U.S. Military Academy were recruited. Participants completed one data collection session, performing one MDL attempt. The attempt was video recorded using three devices: two handheld tablets placed perpendicular to the sagittal and frontal planes recording at 240 Hz and one digital camera positioned at a 45° angle recording at 30 Hz. A reference standard was established through slow-motion analysis of the sagittal and frontal plane recordings. Six raters with varying degrees of professional experience viewed the 45° camera recordings at real-time speed independently, in a random order, on two separate occasions. Lift success was dichotomously assessed as successful or unsuccessful according to the MDL standards. Cohen's kappa was computed to determine inter- and intra-rater reliabilities among raters. Bivariate correlation was used to assess associations among load lifted, BMI, and sex. A chi-squared test of independence assessed the relationship between sex and overall lift success.

RESULTS

Inter-rater reliability between the six raters ranged from 0.29 to 0.69. Inter-rater reliability between the raters to the reference standard ranged from 0.28 to 0.61. Intra-rater reliability ranged from 0.51 to 0.84. Inter-rater reliability of raters who had attended a Training and Doctrine Command-approved ACFT certification course ranged from 0.51 to 0.66, while those who had not ranged from 0.34 to 0.46. BMI and sex were associated with load lifted (r = 0.405, P = .002; r = -0.727, P < .001, respectively). Overall lift success was not associated with load lifted (r = -0.047, P = .731). Overall lift success was not related to sex (χ2 = 0.271, P = .602).

CONCLUSION

Inter-rater reliability of the six raters ranged from poor to substantial, while intra-rater reliability ranged from moderate to excellent. Compared to a reference standard, inter-rater reliability ranged from poor to substantial. The wide range in consistency demonstrated in this study, both between and within raters, brings into question the current subjective methods used to grade the MDL. More research is needed to understand the most feasible, valid, and reliable way to assess performance standards like the MDL that may affect a soldier's career progression.

Footwear Affects Conventional and Sumo Deadlift Performance

Barefoot weightlifting has become a popular training modality in recent years due to anecdotal suggestions of improved performance. However, research to support these anecdotal claims is limited. Therefore, the purpose of this study was to assess the differences between the conventional deadlift (CD) and the sumo deadlift (SD) in barefoot and shod conditions. On day one, one-repetition maximums (1 RM) were assessed for thirty subjects in both the CD and SD styles. At least 72 h later, subjects returned to perform five repetitions in four different conditions (barefoot and shod for both CD and SD) at 70% 1 RM. A 2 × 2 (footwear × lifting style) MANOVA was used to assess differences between peak vertical ground reaction force (VGRF), total mechanical work (WORK), barbell vertical displacement (DISP), peak vertical velocity (PV) and lift time (TIME) during the concentric phase. The CD displayed significant increases in VGRF, DISP, WORK, and TIME over the SD. The shod condition displayed increased WORK, DISP, and TIME compared to the barefoot condition. This study suggests that lifting barefoot does not improve performance as no differences in VGRF or PV were evident. The presence of a shoe does appear to increase the DISP and WORK required to complete the lift, suggesting an increased work load is present while wearing shoes.

Relationship of Limb Lengths and Body Composition to Lifting in Weightlifting

Weightlifting is a discipline where technique and anthropometric characteristics are essential to achieve the best results in competitions. This study aims to analyse the relationships between body composition, limb length and barbell kinematics in the performance of weightlifters. It consists of an observational and descriptive study of 19 athletes (12 men [28.50 ± 6.37 years old; 84.58 ± 14.11 kg; 176.18 ± 6.85 cm] and 7 women [27.71 ± 6.34 years old; 64.41 ± 7.63 kg; 166.94 ± 4.11 cm]) who met the inclusion criteria. A level I anthropometrist took anthropometric measures according to the methodology of the International Society for the Advancement of Kinanthropometry (ISAK), and the measurement of the barbell velocity was made with the software Kinovea. In terms of body composition, both genders are within the percentage range of fat mass recommended for this sport. In female weightlifters, there is a positive correlation between foot length, maximal velocity in the Snatch (ρ = 0.775, p = 0.041), and performance indicator in the Snatch and the Clean & Jerk (ρ = 0.964, p < 0.001; ρ = 0.883, p = 0.008, respectively). In male weightlifters, a positive correlation between tibial length and average velocity of the barbell in the Snatch is observed (ρ = 0.848, p < 0.001). Muscle mass percentage correlates positively with performance indicator in both techniques (ρ = 0.634, p = 0.027; ρ = 0.720, p = 0.008). Also, the relative length of the upper limb is negatively correlated with the performance indicator (ρ = −0.602, p = 0.038). Anthropometry and body composition may facilitate skill acquisition among this sport population, contributing to increase the limited body of scientific knowledge related to weightlifting.

The Effects of the Barbell Hip Thrust on Post-Activation Performance Enhancement of Change of Direction Speed in College-Aged Men and Women

This study investigated whether the barbell hip thrust (BHT) enhanced change-of-direction (COD) speed measured by the 505 COD speed test. Forty recreationally trained individuals completed three sessions. Session 1 included one-repetition maximum (1RM) BHT testing to measure absolute and relative strength. Sessions 2 and 3 involved two counter-balanced conditioning activities (CAs): 3 sets × 5 repetitions of the BHT at 85% 1RM and a control condition (CC; 6 min rest). The 505 COD speed test was performed 5 and 2.5 min pre-CA, and 4, 8, 12, and 16 min post-CA in each session. A 2 × 5 repeated-measures ANOVA (p < 0.05) calculated performance changes across time post-CA. A 2 × 2 repeated-measures ANOVA analyzed best potentiated performance. Partial correlations controlling for sex calculated relationships between the 1RM BHT and 505 COD speed test percent potentiation. There was a significant main effect for time (p < 0.001), but not for condition (p = 0.271) or condition × time (p = 0.295). There were no significant correlations between 1RM BHT and potentiation. The 85% 1RM BHT did potentiate the 505 4–16 min post-CA but no more than the CC. Nonetheless, a heavy BHT could be programmed prior to COD drills as COD speed could be potentiated and performance improved in men and women.

Contemporary Training Practices of Norwegian Powerlifters

Shaw, MP, Andersen, V, Sæterbakken, AH, Paulsen, G, Samnøy, LE, and Solstad, TEJ. Contemporary training practices of Norwegian powerlifters. J Strength Cond Res XX(X): 000-000, 2020-The aim of this study was to explore the contemporary training practices of Norwegian powerlifters. One hundred twenty-four Norwegian powerlifters completed an electronic questionnaire that surveyed their current training practices with a focus on 2 areas: (a) training content and (b) training design and monitoring. One hundred seventeen respondents met the inclusion criteria, and the sample included World, European, and Norwegian champions. Where data were dichotomized, chi-square tests were used. The most frequently reported (58.1%) category of training was 5-6 times per week, with no statistically significant associations between levels of competitors (international vs. noninternational) (X(1) = 0.414, p = 0.52). The most frequently reported load used in training was 71-80% 1 repetition maximum. The majority of Norwegian (76.9%) powerlifters train with variable resistance, with those competing internationally more likely to use elastic bands (X(1) = 4.473, p = 0.034). 32.5% of respondents reported that they included weightlifting exercises in their training. Norwegian powerlifters' training differs from practices previously identified in the literature, with a higher prevalence of elastic resistance, particularly for those competing internationally, and a decreased use of weightlifting exercises at all levels. Norwegian powerlifters train frequently (5 or more times per week) and with submaximal loads.

A Preliminary Analysis of Relationships Between a 1RM Hexagonal Bar Load and Peak Power with the Tactical Task of a Body Drag

A critical job task for law enforcement officers that should be influenced by strength is the body drag. This study analyzed relationships between absolute and relative strength measured by a one-repetition maximum hexagonal bar deadlift (1RM HBD), with body drags completed with 74.84 kg and 90.72 kg dummies. Twenty recreationally-trained individuals completed the 1RM HBD in one session, with peak power measured via a linear position transducer. Over two subsequent sessions, participants dragged the 74.84 kg and 90.72 kg dummies with two techniques. The first technique followed Californian standards, where participants wrapped their arms around the dummy and lifted it to standing before timing commenced. In the adapted technique, timing included the initial manipulation of the dummy. Participants dragged the dummy as quickly as possible over a 9.75 m distance. Partial correlations and linear regression (controlling for sex; p < 0.05) analyzed relationships between the HBD and body drags. The standard 74.84 kg body drag correlated with every HBD variable (r = -0.477 to -0.666), and was predicted by the absolute 1RM HBD (r² = 0.467). The adapted 74.84 kg drag correlated with all HBD variables (r = -0.535 to - 0.754), and was predicted by peak power and the 1RM HBD (r² = 0.758). Both 90.72 kg drags correlated with absolute and relative 1RM HBD (r = -0.517 to -0.670). Strength related to all body drags; peak power may be more important for drags with lighter loads. Strength training should be a focus in law enforcement to enhance drag performance.

Loading Range for the Development of Peak Power in the Close-Grip Bench Press versus the Traditional Bench Press

The close-grip bench press (CGBP) is a variation of the traditional bench press (TBP) that uses a narrower grip (~95% biacromial distance) and has application for athletes performing explosive arm actions where the hands are positioned close to the torso. Limited research has investigated CGBP peak power. Twenty-six strength-trained individuals completed a one-repetition maximum TBP and CGBP. During two other sessions, subjects completed two repetitions as explosively as possible with loads from 20% to 90% for each exercise, with peak power measured by a linear position transducer. A factorial ANOVA calculated between- and within-exercise differences in peak power. Partial correlations controlling for sex determined relationships between absolute and relative strength and peak power load. Peak power for the TBP occurred at 50% 1RM, and 30% 1RM for the CGBP. There were no significant (p = 0.680) differences between peak power at each load when comparing the TBP and CGBP. For the within-exercise analysis, there were generally no significant differences in TBP and CGBP peak power for the 20⁻50% 1RM loads. There were no significant relationships between strength and peak power load (p = 0.100⁻0.587). A peak power loading range of 20⁻50% 1RM for the TBP and CGBP is suggested for strength-trained individuals.