Sacrificial bonds in polymer brushes from rat tail tendon functioning as nanoscale velcro

VELCRO-INSPIRED SUPRAMOLECULAR SYSTEM FOR SILICA–RUBBER COUPLING

The state-of-the-art silica–rubber coupling is based on forming chemical links between a silica surface and rubber macromolecules. However, the chemical links are relatively short and stiff, thus in case of a chemical breakage they are highly unlikely to recombine. This could result in a potential deterioration of the interphase properties over time. To overcome this drawback, a new approach to silica–rubber coupling was investigated in the current study. The new approach is inspired by the Velcro hook-and-loop system from nature that facilitates a re-connectability, thus re-formation of the interphase properties in case of a breakage. For this, various long oligomeric brushes were grafted onto silica surfaces considered to act as supramolecular hooks. Such modified silica were dispersed in rubber and vulcanized. The resulting cross-linked rubber matrix is considered to act as supramolecular loops. The prepared vulcanizates were compared with reference samples containing common coupling or covering agents. The reinforcing potential provided by the newly developed system is lower than the chemical coupling system but considerably higher than the covering system. The new system also provides better mechanical properties, recovery after cycling stretching, and heat treatment than the references. A new reinforcing mechanism is proposed for the silica grafted with oligomeric brushes that exhibits a good chemical compatibility to the rubber matrix.

A High Coordination of Cross-Links Is Beneficial for the Strength of Cross-Linked Fibers

The influence of the coordination of (reversible) cross-links on the mechanical properties of aligned fiber bundles is investigated. Two polymeric systems containing cross-links of different coordination (two- and three-fold coordination) but having the same binding energy are investigated. In particular, the response to loading of these systems is compared. Mechanical parameters (strength, stiffness and work-to-fracture) are obtained by computational loading tests. The influence of coordination is studied for simple test systems with pre-defined topologies that maximize strength as well as for more realistic fiber bundles containing nine chains. The results show that a higher coordination of cross-links has a beneficial effect on the strength and the stiffness of the systems, while the work-to-fracture was found larger for the system having a smaller coordination of cross-links. It can be concluded that controlling the coordination of cross-links is a versatile tool to specifically tailor the mechanical properties of polymeric structures.

Progress in bio-inspired sacrificial bonds in artificial polymeric materials

Mimicking natural structures has been highly pursued in the fabrication of synthetic polymeric materials due to its potential in breaking the bottlenecks in mechanical properties and extending the applications of polymeric materials. Recently, it has been revealed that the energy dissipating mechanisms via sacrificial bonds are among the important factors which account for strong and tough attributes of natural materials. Great progress in synthesis of polymeric materials consisting of sacrificial bonds has been achieved. The present review aims at (1) summarizing progress in the mechanics and chemistry of sacrificial bond bearing polymers, (2) describing the mechanisms of sacrificial bonds in strengthening/toughening polymers based on studies by single-molecule force spectroscopy, chromophore incorporation and constitutive laws, (3) presenting synthesis methods for sacrificial bonding including dual-crosslink, dual/multiple-network, and sacrificial interfaces, (4) discussing the important advances in engineering sacrificial bonding into hydrogels, biomimetic structures and elastomers, and (5) suggesting future works on molecular simulation, viscoelasticity, construction of sacrificial interfaces and sacrificial bonds with high dissociative temperature. It is hoped that this review will provide guidance for further development of sacrificial bonding strategies in polymeric materials.

Energy dissipation and recovery in a simple model with reversible cross-links

Reversible cross-linking is a method of enhancing the mechanical properties of polymeric materials. The inspiration for this kind of cross-linking comes from nature, which uses this strategy in a large variety of biological materials to dramatically increase their toughness. Recently, first attempts were made to transfer this principle to technological applications. In this study, Monte Carlo simulations are used to investigate the effect of the number and the topology of reversible cross-links on the mechanical performance of a simple model system. Computational cyclic loading tests are performed, and the work to fracture and the energy dissipation per cycle are determined, which both increase when the density of cross-links is increased. Furthermore, a different topology of the bonds may increase the work to fracture by a factor of more than 2 for the same density. This dependence of the mechanical properties on the topology of the bonds has important implications on the self-healing properties of such systems, because only a fast return of the system to its unloaded state after release of the load ensures that the optimal topology may form.

Incorporating plasticity of the interfibrillar matrix in shear lag models is necessary to replicate the multiscale mechanics of tendon fascicles

Despite current knowledge of tendon structure, the fundamental deformation mechanisms underlying tendon mechanics and failure are unknown. We recently showed that a shear lag model, which explicitly assumed plastic interfibrillar load transfer between discontinuous fibrils, could explain the multiscale fascicle mechanics, suggesting that fascicle yielding is due to plastic deformation of the interfibrillar matrix. However, it is unclear whether alternative physical mechanisms, such as elastic interfibrillar deformation or fibril yielding, also contribute to fascicle mechanical behavior. The objective of the current work was to determine if plasticity of the interfibrillar matrix is uniquely capable of explaining the multiscale mechanics of tendon fascicles including the tissue post-yield behavior. This was examined by comparing the predictions of a continuous fibril model and three separate shear lag models incorporating an elastic, plastic, or elastoplastic interfibrillar matrix with multiscale experimental data. The predicted effects of fibril yielding on each of these models were also considered. The results demonstrated that neither the continuous fibril model nor the elastic shear lag model can successfully predict the experimental data, even if fibril yielding is included. Only the plastic or elastoplastic shear lag models were capable of reproducing the multiscale tendon fascicle mechanics. Differences between these two models were small, although the elastoplastic model did improve the fit of the experimental data at low applied tissue strains. These findings suggest that while interfibrillar elasticity contributes to the initial stress response, plastic deformation of the interfibrillar matrix is responsible for tendon fascicle post-yield behavior. This information sheds light on the physical processes underlying tendon failure, which is essential to improve our understanding of tissue pathology and guide the development of successful repair.

How to integrate biological motors towards bio-actuators fueled by ATP

Biological motors, driven by the conversion of chemical energy into mechanical energy, are much more efficient than man-made machines. The development of such efficient biomimetic motor systems in vitro is currently a vital need. However, great difficulty lies in how to integrate the sophisticated functions of the constituent components to obtain a performance as in the case of natural living systems. Based on 'active' and 'passive' self-organization principles, it has been demonstrated that the functions of motor protein systems can be integrated to obtain complex hierarchical structures that can work as actuators. Most of the works discussed here concern two-dimensional behavior, and recent works aim to explore the three-dimensional features of such artificial bio-mechanical systems.

Tensile properties of human collagen fibrils and fascicles are insensitive to environmental salts

To carry out realistic in vitro mechanical testing on anatomical tissue, a choice has to be made regarding the buffering environment. Therefore, it is important to understand how the environment may influence the measurement to ensure the highest level of accuracy. The most physiologically relevant loading direction of tendon is along its longitudinal axis. Thus, in this study, we focus on the tensile mechanical properties of two hierarchical levels from human patellar tendon, namely: individual collagen fibrils and fascicles. Investigations on collagen fibrils and fascicles were made at pH 7.4 in solutions of phosphate-buffered saline at three different concentrations as well as two HEPES buffered solutions containing NaCl or NaCl + CaCl2. An atomic force microscope technique was used for tensile testing of individual collagen fibrils. Only a slight increase in relative energy dissipation was observed at the highest phosphate-buffered saline concentration for both the fibrils and fascicles, indicating a stabilizing effect of ionic screening, but changes were much less than reported for radial compression. Due to the small magnitude of the effects, the tensile mechanical properties of collagen fibrils and fascicles from the patellar tendon of mature humans are essentially insensitive to environmental salt concentration and composition at physiological pH.

Probing the intrinsically oil-wet surfaces of pores in North Sea chalk at subpore resolution

Pore surface properties control oil recovery. This is especially true for chalk reservoirs, where pores are particularly small. Wettability, the tendency for a surface to cover itself with fluid, is traditionally defined by the angle a droplet makes with a surface, but this macroscopic definition is meaningless when the particles are smaller than even the smallest droplet. Understanding surface wetting, at the pore scale, will provide clues for more effective oil recovery. We used a special mode of atomic force microscopy and a hydrophobic tip to collect matrices of 10,000 force curves over 5- x 5-mum(2) areas on internal pore surfaces and constructed maps of topography, adhesion, and elasticity. We investigated chalk samples from a water-bearing formation in the Danish North Sea oil fields that had never seen oil. Wettability and elasticity were inhomogeneous over scales of 10s of nanometers, smaller than individual chalk particles. Some areas were soft and hydrophobic, whereas others showed no correlation between hardness and adhesion. We conclude that the macroscopic parameter, "wetting," averages the nanoscopic behavior along fluid pathways, and "mixed-wet" samples have patches with vastly different properties. Development of reservoir hydrophobicity has been attributed to infiltrating oil, but these new results prove that wettability and elasticity are inherent properties of chalk. Their variability, even on single particles, must result from material originally present during sedimentation or material sorbed from the pore fluid some time later.

Observing growth steps of collagen self-assembly by time-lapse high-resolution atomic force microscopy

Insights into molecular mechanisms of collagen assembly are important for understanding countless biological processes and at the same time a prerequisite for many biotechnological and medical applications. In this work, the self-assembly of collagen type I molecules into fibrils could be directly observed using time-lapse atomic force microscopy (AFM). The smallest isolated fibrillar structures initiating fibril growth showed a thickness of approximately 1.5 nm corresponding to that of a single collagen molecule. Fibrils assembled in vitro established an axial D-periodicity of approximately 67 nm such as typically observed for in vivo assembled collagen fibrils from tendon. At given collagen concentrations of the buffer solution the fibrils showed constant lateral and longitudinal growth rates. Single fibrils continuously grew and fused with each other until the supporting surface was completely covered by a nanoscopically well-defined collagen matrix. Their thickness of approximately 3 nm suggests that the fibrils were build from laterally assembled collagen microfibrils. Laterally the fibrils grew in steps of approximately 4 nm, indicating microfibril formation and incorporation. Thus, we suggest collagen fibrils assembling in a two-step process. In a first step, collagen molecules assemble with each other. In the second step, these molecules then rearrange into microfibrils which form the building blocks of collagen fibrils. High-resolution AFM topographs revealed substructural details of the D-band architecture of the fibrils forming the collagen matrix. These substructures correlated well with those revealed from positively stained collagen fibers imaged by transmission electron microscopy.

Principles and Implementations of Dissipative (Dynamic) Self-Assembly

Dynamic self-assembly (DySA) processes occurring outside of thermodynamic equilibrium underlie many forms of adaptive and intelligent behaviors in natural systems. Relatively little, however, is known about the principles that govern DySA and the ways in which it can be extended to artificial ensembles. This article discusses recent advances in both the theory and the practice of nonequilibrium self-assembly. It is argued that a union of ideas from thermodynamics and dynamic systems' theory can provide a general description of DySA. In parallel, heuristic design rules can be used to construct DySA systems of increasing complexities based on a variety of suitable interactions/potentials on length scales from nanoscopic to macroscopic. Applications of these rules to magnetohydrodynamic DySA are also discussed.