Laminin Enriched Scaffolds for Tissue Engineering Applications

Utilization of Carbon Nanotubes in Manufacturing of 3D Cartilage and Bone Scaffolds

Cartilage and bone injuries are prevalent ailments, affecting the quality of life of injured patients. Current methods of treatment are often imperfect and pose the risk of complications in the long term. Therefore, tissue engineering is a rapidly developing branch of science, which aims at discovering effective ways of replacing or repairing damaged tissues with the use of scaffolds. However, both cartilage and bone owe their exceptional mechanical properties to their complex ultrastructure, which is very difficult to reproduce artificially. To address this issue, nanotechnology was employed. One of the most promising nanomaterials in this respect is carbon nanotubes, due to their exceptional physico-chemical properties, which are similar to collagens-the main component of the extracellular matrix of these tissues. This review covers the important aspects of 3D scaffold development and sums up the existing research tackling the challenges of scaffold design. Moreover, carbon nanotubes-reinforced bone and cartilage scaffolds manufactured using the 3D bioprinting technique will be discussed as a novel tool that could facilitate the achievement of more biomimetic structures.

Advanced Biomaterials and Processing Methods for Liver Regeneration: State-of-the-Art and Future Trends

Liver diseases contribute markedly to the global burden of mortality and disease. The limited organ disposal for orthotopic liver transplantation results in a continuing need for alternative strategies. Over the past years, important progress has been made in the field of tissue engineering (TE). Many of the early trials to improve the development of an engineered tissue construct are based on seeding cells onto biomaterial scaffolds. Nowadays, several TE approaches have been developed and are applied to one vital organ: the liver. Essential elements must be considered in liver TE-cells and culturing systems, bioactive agents or growth factors (GF), and biomaterials and processing methods. The potential of hepatocytes, mesenchymal stem cells, and others as cell sources is demonstrated. They need engineered biomaterial-based scaffolds with perfect biocompatibility and bioactivity to support cell proliferation and hepatic differentiation as well as allowing extracellular matrix deposition and vascularization. Moreover, they require a microenvironment provided using conventional or advanced processing technologies in order to supply oxygen, nutrients, and GF. Herein the biomaterials and the conventional and advanced processing technologies, including cell-sheets process, 3D bioprinting, and microfluidic systems, as well as the future trends in these major fields are discussed.

Adipose-Derived Stem Cells (ADSCs) Loaded Gelatin-Sericin-Laminin Cryogels for Tissue Regeneration in Diabetic Wounds

Healing in wounds like pressure ulcers, diabetic ulcers, venous ulcers, and arterial insufficiency ulcers is immensely hampered and causes both an economic burden and morbidity to patients. These wounds face a plethora of hostile conditions like elevated reactive oxygen species (ROS), impaired angiogenesis, senescent fibroblasts, and deficient stem cells that significantly diminish the probability of self-healing in these wounds. Adipose-derived stem cell therapy (ADSC) presents a promising approach to achieve efficient healing in such cases. To address the complex scenario of chronic wounds, we propose a combinatorial approach of delivering ADSCs on antioxidant gelatin-sericin (GS) scaffolds coated with laminin (GSL), an endothelial basement protein to improve angiogenesis. The synthesized GS scaffolds showed values of compression modulus, pore size, porosity, and the swelling ratio in the range of 65 kPa, 158 ± 48.8 μm, 91.1% ± 1.25, and 28 ± 2.5, respectively. A DPPH assay revealed GS scaffolds exhibit around 20% more scavenging as against gelatin (G) scaffolds and better protection against free radical assault, thus enhancing cell viability and the metabolic index of fibroblast cells. Different cells, namely, fibroblasts, keratinocytes, and ADSCs, cultured on GS scaffolds had better metabolic activity as compared with G scaffolds. Laminin coating onto the scaffolds leads to improved attachment and tube formation of endothelial cells as depicted in scanning electron microscopy images. Finally, we validated the applicability of the ADSCs loaded laminin-coated GS scaffolds in a diabetic ulcer rat model. Hematoxylin and eosin, Masson's trichrome, and picrosirius red staining showed better regeneration and collagen remodeling in ADSCs loaded GSL scaffolds. Immunostaining of CD31 staining demonstrates enhanced angiogenesis in GSL-ADSC as compared with other groups.

Biomimetic modification of dual porosity poly(2-hydroxyethyl methacrylate) hydrogel scaffolds-porosity and stem cell growth evaluation

The macroporous synthetic poly(2-hydroxyethyl methacrylate) (pHEMA) hydrogels as 3D cellular scaffolds with specific internal morphology, so called dual pore size, were designed and studied. The morphological microstructure of hydrogels was characterized in the gel swollen state and the susceptibility of gels for stem cells was evaluated. The effect of specific chemical groups covalently bound in the hydrogel network by copolymerization on cell adhesion and growth, followed by effect of laminin coating were investigated. The evaluated gels contained either carboxyl groups of the methacrylic acid or quaternary ammonium groups brought by polymerizable ammonium salt or their combinations. The morphology of swollen gel was visualized using the laser scanning confocal microscopy. All hydrogels had very similar porous structures - their matrices contained large pores (up to 10² μm) surrounded with gel walls with small pores (10⁰ μm). The total pore volume in hydrogels swollen in buffer solution ranged between 69 and 86 vol%. Prior to the seeding of the mouse embryonal stem cells, the gels were coated with laminin. The hydrogel with quaternary ammonium groups (with or without laminin) stimulated the cell growth the most. The laminin coating lead to a significant and quaternary ammonium groups. The gel chemical modification influenced also the topology of cell coverage that ranged from individual cell clusters to well dispersed multi cellular structures. Findings in this study point out the laser scanning confocal microscopy as an irreplaceable method for a precise and quick assessment of the hydrogel morphology. In addition, these findings help to optimize the chemical composition of the hydrogel scaffold through the combination of chemical and biological factors leading to intensive cell attachment and proliferation.

Laminin-111 functionalized polyethylene glycol hydrogels support myogenic activity in vitro

Skeletal muscle has a remarkable regenerative capability following mild physical or chemical insult. However, following a critical loss of muscle tissue, the regeneration process is impaired due to the inadequate myogenic activity of muscle resident stem cells (i.e., satellite cells). Laminin (LM) is a heterotrimeric structural protein in the satellite cell niche that is crucial for maintaining its function. In this study, we created hydrogels composed of poly (ethylene glycol) (PEG) and LM-111 to provide an elastic substrate for satellite cell proliferation at the site of injury. The PEG-LM111 conjugates were mixed with 5% and 10% (w/v) pure PEG-diacrylate (PEGDA) and photopolymerized to form 5% and 10% PEGLM gels. Pure 5% and 10% PEGDA gels were used as controls. The modulus of both hydrogels containing 10% (w/v) PEGDA was significantly higher than the hydrogels containing 5% (w/v) PEGDA. The 5% PEGLM hydrogels showed significantly higher swelling in aqueous medium suggesting a more porous structure. C₂C₁₂ myoblasts cultured on the softer 5% PEGLM hydrogels showed a flat and spread-out morphology when compared to the rounded, multicell clusters formed on the 5% PEGDA, 10% PEGDA, and 10% PEGLM hydrogels. The 5% PEGLM hydrogels also promoted a significant increase in both vascular endothelial growth factor and interleukin-6 (IL-6) production from the myoblasts. Additionally, the expression of MyoD was significantly higher while that of myogenin and α-actinin trended higher on the 5% PEGLM hydrogels compared to 5% PEGDA on day 5. Our data suggests that the introduction of LM-111 into compliant PEG hydrogels promoted myoblast adhesion, survival, pro-regenerative growth factor production, and myogenic activity.

Laminin-111 enriched fibrin hydrogels for skeletal muscle regeneration

Laminin (LM)-111 supplementation has improved muscle regeneration in several models of disease and injury. This study investigated a novel hydrogel composed of fibrinogen and LM-111. Increasing LM-111 concentration (50-450 μg/mL) in fibrin hydrogels resulted in highly fibrous scaffolds with progressively thinner interlaced fibers. Rheological testing showed that all hydrogels had viscoelastic behavior and the Young's modulus ranged from 2-6KPa. C₂C₁₂ myobalsts showed a significant increase in VEGF production and decrease in IL-6 production on LM-111 enriched fibrin hydrogels as compared to pure fibrin hydrogels on day 4. Western blotting results showed a significant increase in MyoD and desmin protein quantity but a significant decrease in myogenin protein quantity in myoblasts cultured on the LM-111 (450 μg/mL) enriched fibrin hydrogel. Combined application of electromechanical stimulation significantly enhanced the production of VEGF and IGF-1 from myoblast seeded fibrin-LM-111 hydrogels. Taken together, these observations offer an important first step toward optimizing a tissue engineered constructs for skeletal muscle regeneration.