Synthesis and Characterization of Core-Shell Magnetic Mesoporous Silica and Organosilica Nanostructures

High Energy Ball Milling and Liquid Crystal Template Method: A Successful Combination for the Preparation of Magnetic Nano-Platforms

In this study, we present the preparation of superparamagnetic ordered mesoporous silica (SOMS) for biomedical applications by the combination of high energy ball milling (HEBM) and the liquid crystal template method (LCT) to produce a material comprised of room temperature superparamagnetic Fe₃O₄ nanoparticles in a MCM-41 like mesostructured silica. In a typical synthesis, a mixture of Fe₂O₃ and silica was sealed in a stainless-steel vial with steel balls. Ball milling experiments were performed in a vibratory mill apparatus. The milling process produced nanocomposites with an average size ranging from ∼100-200 nm, where the Fe₃O₄ nanoparticles (4.8 nm size) are homogeneously dispersed into the amorphous SiO₂ matrix. The obtained nanocomposite has been used for the preparation of the SOMS through the LCT method. Structural, morphological and textural characterization were performed using X-ray powder diffraction, transmission electron microscopy and nitrogen sorption analysis. Field dependence of magnetization was investigated and showed superparamagnetic behaviour at 300 K with a value of saturation magnetization (M_s) that is of interest for biomedical applications.

Tunable Magnetic Hyperthermia Properties of Pristine and Mildly Reduced Graphene Oxide/Magnetite Nanocomposite Dispersions

We present a study on the magnetic hyperthermia properties of graphene oxide/magnetite (GO/MNP) nanocomposites to investigate their heat production behavior upon the modification of the oxidation degree of the carbonaceous host. Avoiding the harsh chemical conditions of the regular in situ co-precipitation-based routes, the oppositely charged MNPs and GO nanosheets were combined by the heterocoagulation process at pH ~ 5.5, which is a mild way to synthesize composite nanostructures at room temperature. Nanocomposites prepared at 1/5 and 1/10 GO/MNP mass ratios were reduced by NaBH₄ and L-ascorbic acid (LAA) under acidic (pH ~ 3.5) and alkaline conditions (pH ~ 9.3). We demonstrate that the pH has a crucial effect on the LAA-assisted conversion of graphene oxide to reduced GO (rGO): alkaline reduction at higher GO loadings leads to doubled heat production of the composite. Spectrophotometry proved that neither the moderately acidic nor alkaline conditions promote the iron dissolution of the magnetic core. Although the treatment with NaBH₄ also increased the hyperthermic efficiency of aqueous GO/MNP nanocomposite suspensions, it caused a drastic decline in their colloidal stability. However, considering the enhanced heat production and the slightly improved stability of the rGO/MNP samples, the reduction with LAA under alkaline condition is a more feasible way to improve the hyperthermic efficiency of magnetically modified graphene oxides.

Magnetic mesoporous silica nanostructures: investigation of magnetic properties

Magnetic mesoporous silica (MS) nanocomposites provide the possibility of generating multi-functional objects for application in different technological areas. This paper focuses on the magnetic properties of nanocomposites constituted by spinel iron oxide nanoparticles (magnetic nanoparticles (MNPs), < D > ≈ 8-9 nm) embedded in an MS matrix. The mesoporous structure of the silica matrix and the presence of the nanoparticles inside clearly emerge from transmission electron microscopy (TEM) measurements. Low temperature (5 K) field-dependent magnetization measurements reveal saturation magnetization (M_S ) close to bulk value (M _S bulk ∼ 90 emu g^-1) for both MNPs and MNP/MS nanocomposites, indicating that the presence of silica does not affect the magnetic features of the single MNPs. Moreover, the dependence of the remanent magnetization on field (i.e. δM plots) at low temperature has shown a small but evident decrease of interaction in an MNP/MS sample with respect to MNP samples A m² Kg^-1. Finally, a partial orientation of the easy axis is observed when the MNPs are embedded in the silica matrix.

A. Ali L, Nguyen C, Becerro Nieto AI, Francolon N, Oliveiro E, Boyer D, Mahiou R, Raehm L, Gary-Bobo M, Durand JO, Charnay C. Encapsulation of Upconversion Nanoparticles in Periodic Mesoporous Organosilicas

(1) Background: Nanomedicine has recently emerged as a promising field, particularly for cancer theranostics. In this context, nanoparticles designed for imaging and therapeutic applications are of interest. We, therefore, studied the encapsulation of upconverting nanoparticles in mesoporous organosilica nanoparticles. Indeed, mesoporous organosilica nanoparticles have been shown to be very efficient for drug delivery, and upconverting nanoparticles are interesting for near-infrared and X-ray computed tomography imaging, depending on the matrix used. (2) Methods: Two different upconverting-based nanoparticles were synthesized with Yb3+-Er3+ as the upconverting system and NaYF4 or BaLuF5 as the matrix. The encapsulation of these nanoparticles was studied through the sol-gel procedure with bis(triethoxysilyl)ethylene and bis(triethoxysilyl)ethane in the presence of CTAB. (3) Results: with bis(triethoxysilyl)ethylene, BaLuF5: Yb3+-Er3+, nanoparticles were not encapsulated, but anchored on the surface of the obtained mesoporous nanorods BaLuF5: Yb3+-Er3+@Ethylene. With bis(triethoxysilyl)ethane, BaLuF5: Yb3+-Er3+ and NaYF4: Yb3+-Er3+nanoparticles were encapsulated in the mesoporous cubic structure leading to BaLuF5: Yb3+-Er3+@Ethane and NaYF4: Yb3+-Er3+@Ethane, respectively. (4) Conclusions: upconversion nanoparticles were located on the surface of mesoporous nanorods obtained by hydrolysis polycondensation of bis(triethoxysilyl)ethylene, whereas encapsulation occurred with bis(triethoxysilyl)ethane. The later nanoparticles NaYF4: Yb3+-Er3+@Ethane or BaLuF5: Yb3+-Er3+@Ethane were promising for applications with cancer cell imaging or X-ray-computed tomography respectively.

Isothiocyanate-Functionalized Mesoporous Silica Nanoparticles as Building Blocks for the Design of Nanovehicles with Optimized Drug Release Profile

A straightforward methodology for the synthesis of isothiocyanate-functionalized mesoporous silica nanoparticles (MSNs) by exposure of aminated MSNs to 1,1′-thiocarbonyldi-2(1H)-pyridone is reported. These nanoparticles are chemically stable, water tolerant, and readily react with primary amines without the formation of any by-product. This feature allows the easy modification of the surface of the nanoparticles for tuning their physical properties and the introduction of gatekeepers on the pore outlets. As a proof-of-concept, amino-isothiocyanate-functionalized MSNs have been used for the design of a nanocontainer able to release the drug Ataluren. The release profile of the drug can be easily fine-tuned with the careful choice of the capping amine.

Mesoporous Silica and Organosilica Nanomaterials as UV-Blocking Agents

Mesoporous silica nanoparticles (MSN) and periodic mesoporous organosilica nanoparticles containing bridging benzene (PMOBTB) and ethane (PMOBTE) moieties are synthesized, characterized, and evaluated for application in skin protection from UVA/UVB sun irradiation. Furthermore, the influence of surface functionalization with chelating 3-(2-aminoethylamino)propylsilane and Zn²⁺ ions on the UV-blocking ability of MSN is evaluated, along with the photostability and capability of the synthesized nanomaterials to carry avobenzone, a known UV-absorbing agent. The obtained results reveal promising characteristics of MSN and PMO materials with regard to their potential for sunscreen applications, which could be beneficial in terms of alleviating concerns about health and environmental hazards of sunscreen ingredients.

From Mn3O4/MnO core-shell nanoparticles to hollow MnO: evolution of magnetic properties

Manganese oxide nanoparticles (MNOPs), when dispersed in a water solution, show a magnetic behavior that drastically changes after an aging process. In this paper, the variation in the magnetic properties has been correlated with the structural evolution of the nanoparticles: in particular, the as prepared Mn₃O₄/MnO core/shell system manifests a low temperature magnetization reversal that is strongly affected by the presence of the MnO shell and, in particular, by the existence of a frustrated interfacial region playing a key role in determining the low temperature irreversibility, the finite coercivity slightly above the Curie temperature of the Mn₃O₄ phase and the horizontal displacement of the FC-hysteresis loop. On the other hand, the magnetic behavior of the aged system results dominated by the presence of Mn₃O₄ whose highly anisotropic character (i.e. high coercivity and high magnetization remanence) is attributed to the presence of a large fraction of surface spins. Such a result is consistent with the structural evolution, from core/shell to hollow nanoparticles, as shown by TEM observation.

Silicon-based nanotheranostics

With the rapid expansion of nanoscience and nanotechnology in interdisciplinary fields, multifunctional nanomaterials have attracted particular attention. Recent advances in nanotherapeutics for cancer applications provided diverse groups of synthetic particles with defined cellular and biological functions. The advance of nanotechnology significantly increased the number of possibilities for the construction of diverse biological tools. Such materials are destined to be of great importance because of the opportunity to combine the biotechnological potential of nanoparticles together with the recognition, sensitivity and modulation of cellular pathways or genes when applied to living organisms. In this mini review three main types of Si-based nanomaterials are highlighted in the area of their application for therapy and imaging: porous silicon nanoparticles (pSiNPs), mesoporous silica nanoparticles (MSNs), focusing on their nanoconstructs containing coordination compounds, and periodic mesoporous silica nanoparticles (PMONPs). Moreover, a critical discussion on the research efforts in the construction of nanotheranostics is presented.