Recent advances in microscale separation techniques for lipidome analysis

This review paper highlights the recent research on liquid-phase microscale separation techniques for lipidome analysis over the last 10 years, mainly focusing on capillary liquid chromatography (LC) and capillary electrophoresis (CE) coupled with mass spectrometry (MS). Lipids are one of the most important classes of biomolecules which are involved in the cell membrane, energy storage, signal transduction, and so on. Since lipids include a variety of hydrophobic compounds including numerous structural isomers, lipidomes are a challenging target in bioanalytical chemistry. MS is the key technology that comprehensively identifies lipids; however, separation techniques like LC and CE are necessary prior to MS detection in order to avoid ionization suppression and resolve structural isomers. Separation techniques using μm-scale columns, such as a fused silica capillary and microfluidic device, are effective at realizing high-resolution separation. Microscale separation usually employs a nL-scale flow, which is also compatible with nanoelectrospray ionization-MS that achieves high sensitivity. Owing to such analytical advantages, microscale separation techniques like capillary/microchip LC and CE have been employed for more than 100 lipidome studies. Such techniques are still being evolved and achieving further higher resolution and wider coverage of lipidomes. Therefore, microscale separation techniques are promising as the fundamental technology in next-generation lipidome analysis.

Analysis of Monoclonal Antibodies by Capillary Electrophoresis: Sample Preparation, Separation, and Detection

Therapeutic monoclonal antibodies (mAbs) are dominating the biopharmaceutical field due to the fact of their high specificity in the treatment of diverse diseases. Nevertheless, mAbs are very complex glycoproteins exhibiting several macro- and microheterogeneities that may affect their safety, quality, and efficacy. This complexity is very challenging for mAbs development, formulation, and quality control. To tackle the quality issue, a combination of multiple analytical approaches is necessary. In this perspective, capillary electrophoresis has gained considerable interest over the last decade due to the fact of its complementary features to chromatographic approaches. This review provides an overview of the strategies of mAbs and derivatives analysis by capillary electrophoresis hyphenated to ultraviolet, fluorescence, and mass spectrometry detection. The main sample preparation approaches used for mAb analytical characterization (i.e., intact, middle-up/down, and bottom-up) are detailed. The different electrophoretic modes used as well as integrated analysis approaches (sample preparation and separation) are critically discussed.

CE-MS with electrokinetic supercharging and application to determination of neurotransmitters

Electrokinetic supercharging (EKS) is known as one of the most effective online electrophoretic preconcentration techniques, though pairing with it with mass spectrometry has presented challenges. Here, EKS is successfully paired with ESI-MS/MS to provide a sensitive and robust method for analysis of biogenic amines in biological samples. Injection parameters including electric field strength and the buffer compositions used for the separation and focusing were investigated to achieve suitable resolution, high sensitivity, and compatibility with ESI-MS. Using EKS, the sensitivity of the method was improved 5000-fold compared to a conventional hydrodynamic injection with CZE. The separation allowed for baseline resolution of several neurotransmitters within 16 min with LODs down to 10 pM. This method was applied to targeted analysis of seven biogenic amines from rat brain stem and whole Drosophila tissue. This is the first method to use EKS with CE-ESI-MS/MS to analyze biological samples.

Assessing the suitability of capillary electrophoresis-mass spectrometry for biomarker discovery in plasma-based metabolomics

The actual utility of capillary electrophoresis-mass spectrometry (CE-MS) for biomarker discovery using metabolomics still needs to be assessed. Therefore, a simulated comparative metabolic profiling study for biomarker discovery by CE-MS was performed, using pooled human plasma samples with spiked biomarkers. Two studies have been carried out in this work. Focus of study I was on comparing two sets of plasma samples, in which one set (class I) was spiked with five isotope-labeled compounds, whereas another set (class II) was spiked with six different isotope-labeled compounds. In study II, focus was also on comparing two sets of plasma samples, however, the isotope-labeled compounds were spiked to both class I and class II samples but with concentrations which differ by a factor two between both classes (with one compound absent in each class). The aim was to determine whether CEMS-based metabolomics could reveal the spiked biomarkers as the main classifiers, applying two different data analysis software tools (MetaboAnalyst and Matlab). Unsupervised analysis of the recorded metabolic profiles revealed a clear distinction between class I and class II plasma samples in both studies. This classification was mainly attributed to the spiked isotope-labeled compounds, thereby emphasizing the utility of CE-MS for biomarker discovery.

Ultrasensitive Single Cell Metabolomics by Capillary Electrophoresis-Mass Spectrometry with a Thin-Walled Tapered Emitter and Large-Volume Dual Sample Preconcentration

Single cell metabolome analysis is essential for studying microscale life phenomena such as neuronal networks and tumor microenvironments. Capillary electrophoresis-mass spectrometry (CE-MS) is one of the most sensitive technologies; however, its sensitivity is still not enough for single cell analysis on general human cells such as HeLa. To address these issues, we first developed an efficient ionization emitter, named as a "nanoCESI" emitter, that had a thin-walled (∼10 μm) and tapered (5-10 μm) end. The thin conductive wall enabled sheathless ionization and minimized the flow rate of ionizing sample, and the tapered end efficiently ionized analytes via an electrospray ionization mechanism, providing up to 3.5-fold increase in sensitivity compared with a conventional sheathless emitter. Fifty repetitive analyses on 20 amino acids were successfully achieved with a nanoCESI emitter. Relative standard deviations of 50 analyses were 1.5%, 4.4%, and 6.8% for migration time, peak height, and peak area, respectively, where a limit of detection (LOD) of 170 pM (850 zmol) was achieved. Second, a sample enrichment method, large-volume dual preconcentration by isotachophoresis and stacking (LDIS), was applied to a newly designed protocol of nanoCESI-MS. This approach achieved up to 380-fold enhanced sensitivity and LOD of 450 fM. Compared with normal sheathless CE-MS, coupling of nanoCESI and LDIS provided up to 800-fold increase of sensitivity in total. Finally, metabolome analyses of single HeLa cells were performed, where 20 amino acids were successfully quantified with triple-quadrupole MS and 40 metabolites were identified with quadrupole-time-of-flight MS, as a promising analytical platform for microscale bioanalysis for the next generation.

On-line sample preconcentration by polarity switching in floating electrode-integrated microchannel

In this study, we found that the polarity switching was effective to enrich and separate fluorescent analytes which have weakly-dissociated groups in a floating platinum electrode (width, 50 µm; thickness, 2.5 µm)-integrated straight-channel in microchip electrophoresis (MCE). In the straight channel filled with an Alexa Flour 488 (AF488) solution, a sharp peak was observed after the polarity inversion with a 530-fold enhancement of the sensitivity relative to the conventional MCE analysis. By using a fluorescent pH indicator, we verified that a sharp high-pH zone was generated nearby the floating electrode and moved toward the anode with maintaining the high pH, which induced the sample enrichment like a dynamic pH junction mechanism. In the floating electrode-embedded channel, the mixture of AF488-labeled proteins was also well concentrated and separated within 100 s.

Recent progress of sample stacking in capillary electrophoresis (2016-2018)

Electrophoretic sample stacking comprises a group of capillary electrophoretic techniques where trace analytes from the sample are concentrated into a short zone (stack). This paper is a continuation of our previous reviews on the topic and brings a survey of more than 120 papers published approximately since the second quarter of 2016 till the first quarter of 2018. It is organized according to the particular stacking principles and includes chapters on concentration adjustment (Kohlrausch) stacking, on stacking techniques based on pH changes, on stacking in electrokinetic chromatography and on other stacking techniques. Where available, explicit information is given about the procedure, electrolyte(s) used, detector employed and sensitivity reached. Not reviewed are papers on transient isotachophoresis which are covered by another review in this issue.