Osteoblastic Cell Behavior and Gene Expression Related to Bone Metabolism on Different Titanium Surfaces

The surface topography of titanium dental implants has a great influence on osseointegration. In this work, we try to determine the osteoblastic behavior and gene expression of cells with different titanium surfaces and relate them to the physicochemical properties of the surface. For this purpose, we have used commercial titanium discs of grade 3: as-received corresponds to machined titanium without any surface treatment (MA), chemically acid etched (AE), treated via sand blasting with Al₂O₃ particles (SB) and a sand-blasting treatment with acid etching (SB+AE). The surfaces have been observed using scanning electron microscopy (SEM) and the roughness, wettability and surface energy with dispersive and polar components have been characterized. Osteoblastic cultures were performed with SaOS-2 osteoblastic cells determining cell viability as well as alkaline phosphatase levels for 3 and 21 days, and osteoblastic gene expression was determined. The roughness values of the MA discs was 0.02 μm, which increases to 0.3 μm with acid attack and becomes the maximum for the sand-blasted samples, reaching values of 1.2 μm for SB and SB+AE. The hydrophilic behavior of the MA and AE samples with contact angles of 63° and 65° is superior to that of the rougher samples, being 75° for SB and 82° for SB+AE. In all cases, they show good hydrophilicity. GB and GB+AE surfaces present a higher polar component in the surface energy values, 11.96 and 13.18 mJ/m², respectively, than AE and MA, 6.64 and 9.79 mJ/m², respectively. The osteoblastic cell viability values at three days do not show statistically significant differences between the four surfaces. However, the viability of the SB and SB+AE surfaces at 21 days is much higher than that of the AE and MA samples. From the alkaline phosphatase studies, higher values were observed for those treated with sand blasting with and without acid etching compared to the other two surfaces, indicating a greater activity in osteoblastic differentiation. In all cases except in the Osterix (Ostx) -osteoblast-specific transcription factor-a decrease in gene expression is observed in relation to the MA samples (control). The most important increase was observed for the SB+AE condition. A decrease in the gene expression of Osteoprotegerine (OPG), Runt-related transcription factor 2 (Runx2), Receptor Activator of NF-κB Ligand (RANKL) and Alkaline Phosphatase (Alp) genes was observed in the AE surface.

Evidence for the dissolution of molybdenum during tribocorrosion of CoCrMo hip implants in the presence of serum protein

We have characterized CoCrMo, Metal-on-Metal (MoM) implant, wear debris particles and their dissolution following cycling in a hip simulator, and have related the results to the tribocorrosion of synthetic wear debris produced by milling CoCrMo powders in solutions representative of environments in the human body. Importantly, we have employed a modified ICP-MS sample preparation procedure to measure the release of ions from CoCrMo alloys during wear simulation in different media; this involved use of nano-porous ultrafilters which allowed complete separation of particles from free ions and complexes in solution. As a result, we present a new perspective on the release of metal ions and formation of metal complexes from CoCrMo implants. The new methodology enables the mass balance of ions relative to complexes and particles during tribocorrosion in hip simulators to be determined. A much higher release of molybdenum ions relative to cobalt and chromium has been measured. The molybdenum dissolution was enhanced by the presence of bovine serum albumin (BSA), possibly due to the formation of metal-protein complexes. Overall, we believe that the results could have significant implications for the analysis and interpretation of metal ion levels in fluids extracted from hip arthroplasty patients; we suggest that metal levels, including molybdenum, be analysed in these fluids using the protocol described here.

STATEMENT OF SIGNIFICANCE

We have developed an important new protocol for the analysis of metal ion levels in fluids extracted from hip implant patients and also hip simulators. Using this procedure, we present a new perspective on the release of metal ions from CoCrMo alloy implants, revealing significantly lower levels of metal ion release during tribocorrosion in hip simulators than previously thought, combined with the release of much higher percentages of molybdenum ions relative to cobalt and chromium. This work is of relevance, both from the perspective of the fundamental science and study of metal-protein interactions, enabling understanding of the ongoing problem associated with the biotribocorrosion and the link to inflammation associated with Metal-on-Metal (MoM) hip implants made from CoCrMo alloys.

Relevant aspects in the surface properties in titanium dental implants for the cellular viability

Roughness and topographical features are the most relevant of the surface properties for a dental implant for its osseointegration. For that reason, we studied the four surfaces more used in titanium dental implants: machined, sandblasted, acid etching and sandblasted plus acid etching. The roughness and wettability (contact angle and surface free energy) was studied by means 3D-interferometric microscope and sessile drop method. Normal human gingival fibroblasts (HGF) were obtained from small oral mucosa biopsies and were used for cell cultures. To analyze cell integrity, we first quantified the total amount of DNA and LDH released from dead cells to the culture medium. Then, LIVE/DEAD assay was used as a combined method assessing cell integrity and metabolism. All experiments were carried out on each cell type cultured on each Ti material for 24h, 48h and 72h. To evaluate the in vivo cell adhesion capability of each Ti surface, the four types of discs were grafted subcutaneously in 5 Wistar rats. Sandblasted surfaces were significantly rougher than acid etching and machined. Wettability and surface free energy decrease when the roughness increases in sand blasted samples. This fact favors the protein adsorption. The DNA released by cells cultured on the four Ti surfaces did not differ from that of positive control cells (p>0.05). The number of cells per area was significantly lower (p<0.05) in the sand-blasted surface than in the machined and surface for both cell types (7±2 cells for HGF and 10±5 cells for SAOS-2). The surface of the machined-type discs grafted in vivo had a very small area occupied by cells and/or connective tissue (3.5%), whereas 36.6% of the sandblasted plus acid etching surface, 75.9% of sandblasted discs and 59.6% of acid etching discs was covered with cells and connective tissue. Cells cultured on rougher surfaces tended to exhibit attributes of more differentiated osteoblasts than cells cultured on smoother surfaces. These surface properties justify that the sandblasted implants is able to significantly increase bone contact and bone growth with very good osseointegration results in vivo.

Genotoxic and cytotoxic effects and gene expression changes induced by fixed orthodontic appliances in oral mucosa cells of patients: a systematic review

CONTEXT

The accumulation of chronic or severe acute DNA and cellular damage in oral mucosa cells is one of the main factors that help initiate a wide range of malignant lesions in the oral cavity. There has been considerable controversy in the literature about the effect of such sustained genotoxic and cytotoxic damage to oral mucosa cells.

OBJECTIVE

The aim of this systematic review, reported in accordance with Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, is to investigate the effects of such interventions.

METHODS

Electronic and manual searches were performed (15 May 2015) for Randomized Clinical Trials/quasi-Randomized Clinical Trials that analyzed the genotoxic/cytotoxic effects of these types of oral appliances in humans. A primary outcome (cell/DNA damage) and a number of secondary outcomes were examined. Two reviewers carried out the study selection and performed a "risk of bias" assessment [Cochrane Collaboration's tool]. Wherever possible the meta-analysis was conducted on homogenous groups.

RESULTS

From the electronic search (2797), 6 studies met the eligibility criteria. Most studies (5/6) observed significant differences in most comparisons at the short-term (1-3 months) and long-term (24-48 months) evaluations, with respect to critically acute genotoxic/cytotoxic effects. Some of the studies (2/3) concluded that the post-removable effects at DNA/cellular levels were not significant (p > 0.05) with respect to the controls.

CONCLUSIONS

Acute DNA/cellular damage in oral mucosa cells is induced by orthodontic appliances. Nevertheless, even though these effects were no longer detected after removing the appliances, more rigorous RCTs are needed to explore the extent to which acquired damage can be observed in the oral mucosa.