Comparison of Immediate Implantation into the Socket with and without Periapical Pathology: Systematic Review and Meta-Analysis

Background and Objectives: The present systematic review and meta-analysis were conducted to evaluate and compare the long-term clinical outcomes of immediate implants placed into fresh sockets with and without periapical pathology. Materials and Methods: After the search and review of the literature in the electronic databases, 109 publications were achieved. The titles and abstracts of 66 publications were screened. After the evaluation of the full text of 22 publications, based on the inclusion criteria, six controlled clinical studies were included in this systematic review and meta-analysis. Results: The statistical calculation showed no heterogeneity among the studies included. The implant survival was 99.6% in the test (socket with periapical pathology) and control (socket without periapical pathology) groups of all the clinical trials. The results of the meta-analysis showed no statistically significant difference between test and control groups regarding the marginal bone level and the width of keratinized mucosa in all the studies. Other parameters indicating plaque level, bleeding on probing, and gingival recession also did not differ between test and control groups at the final follow-up in nearly all studies. Conclusions: Within the limitation of this systemic review and meta-analysis, the obtained data suggest that implants immediately placed into the extraction sockets of teeth exhibiting periapical pathology can be successfully osseointegrated for an extended period.

Use or abuse of antibiotics as prophylactic therapy in oral surgery: A systematic review

BACKGROUD

Antibiotics are a type of medication routinely prescribed by dental professionals; however, it is very common that the administration is not justified. Around 15% of dentists admit that they have administered antibiotics unnecessarily more than once a week. The objective of this project is to identify the effectiveness of the use of antibiotics as prophylactic therapy in oral surgery, and to carry out an analysis of the alternatives to pharmacological therapy.

METHODS

The search strategy was carried out in the PubMed, Scopus, and ScienceDirect databases. For study selection, a first filter was carried out by title and abstract, which mentioned the use of prophylactic antibiotics in some type of oral surgery. To establish the risk of bias, the JBI Critical Appraisal Checklist for Randomized Controlled Trials was utilized.

RESULTS

The type of antibiotics most prescribed as prophylactic therapy were beta-lactams, which were indicated in 100% of the studies. Penicillins predominated, observing amoxicillin as the most indicated drug in 54.1% of the studies (n = 13) followed by the use of amoxicillin in conjunction with clavulanic acid in 33.3% of the studies (n = 8). Of the 21 studies included, 17 mention that there is insufficient evidence to support the use of antibiotics as prophylactic therapy in patients who will undergo some type of oral surgery.

CONCLUSIONS

Without a doubt, the biggest challenge is to develop academic update strategies aimed at dentists with active clinical practice and dental students from educational and government institutions to provide updated information about the correct use of prescription drugs.

Antibiotic prophylaxis in oral and maxillofacial surgery: a systematic review

Surgical site infections are a complication of oral and maxillofacial procedures, with the potential for significant morbidity and mortality. Use of preoperative, perioperative, and postoperative antibiotic prophylaxis to reduce the incidence of surgical site infections must be balanced with considerations of a patients' risk of antibiotic-related adverse events. This review aimed to provide evidence-based recommendations for antibiotic prophylaxis. Searches were conducted using MEDLINE, the Cochrane Library, EMBASE, and PUBMED for maxillofacial procedures including: treatment of dental abscesses, extractions, implants, trauma, temporomandibular joints, orthognathics, malignant and benign tumour removal, and bone grafting, limited to articles published since 2000. A total of 98 out of 280 retrieved papers were included in the final analysis. Systematic reviews were assessed using AMSTAR criteria. Randomised controlled trials were assessed for bias using Cochrane Collaborative tools. The overall quality of evidence was assessed using GRADE. Prophylactic antibiotic use is recommended in surgical extractions of third molars, comminuted mandibular fractures, temporomandibular joint replacements, clean-contaminated tumour removal, and complex implants. Prophylactic antibiotic use is not routinely recommended in fractures of the upper or midface facial thirds. Further research is required to provide recommendations in orthognathic, cleft lip, palate, temporomandibular joint surgery, and maxillofacial surgical procedures in medically-compromised patients.

Finite element analysis of a one-piece zirconia implant in anterior single tooth implant applications

This study evaluated the von Mises stress (MPa) and equivalent strain occurring around monolithic yttria-zirconia (Zir) implant using three clinically simulated finite element analysis (FEA) models for a missing maxillary central incisor. Two unidentified patients' cone-beam computed tomography (CBCT) datasets with and without right maxillary central incisor were used to create the FEA models. Three different FEA models were made with bone structures that represent a healed socket (HS), reduced bone width edentulous site (RB), and immediate extraction socket with graft (EG). A one-piece abutment-implant fixture mimicking Straumann Standard Plus tissue level RN 4.1 X 11.8mm, for titanium alloy (Ti) and Zir were modeled. 178 N oblique load and 200 N vertical load were used to simulate occlusal loading. Von Mises stress and equivalent strain values for around each implant model were measured. Within the HS and RB models the labial-cervical region in the cortical bone exhibited highest stress, with Zir having statistically significant lower stress-strain means than Ti in both labial and palatal aspects. For the EG model the labial-cervical area had no statistically significant difference between Ti and Zir; however, Zir performed better than Ti against the graft. FEA models suggest that Ti, a more elastic material than Zir, contributes to the transduction of more overall forces to the socket compared to Zir. Thus, compared to Ti implants, Zir implants may be less prone to peri-implant bone overloading and subsequent bone loss in high stress areas especially in the labial-cervical region of the cortical bone. Zir implants respond to occlusal loading differently than Ti implants. Zir implants may be more favorable in non-grafted edentulous or immediate extraction with grafting.

Releasing Behavior of Lipopolysaccharide from Gelatin Modulates Inflammation, Cellular Senescence, and Bone Formation in Critical-Sized Bone Defects in Rat Calvaria

Lipopolysaccharide (LPS) is a well-known strong inducer of inflammation. However, there is little information regarding how LPS-release behavior affects cellular senescence at the affected area. In this paper, we demonstrate that a vacuum-heating technique (dehydrothermal treatment) can be utilized to prepare an LPS sustained-release gelatin sponge (LS-G). LPS sustained release from gelatin leads to the long-term existence of senescent cells in critical-sized bone defects in rat calvaria. Three types of gelatin sponges were prepared in this study: a medical-grade gelatin sponge with extremely low LPS levels (MG), LS-G, and a LPS rapid-release gelatin sponge (LR-G). Histological (H-E) and immunohistochemical (COX-2, p16, and p21) staining were utilized to evaluate inflammatory reactions and cellular senescence one to three weeks after surgery. Soft X-ray imaging was utilized to estimate new bone formation in the defects. The LR-G led to stronger swelling and COX-2 expression in defects compared to the MG and LS-G at 1 week. Despite a small inflammatory reaction, LS-G implantation led to the long-term existence of senescent cells and hampered bone formation compared to the MG and LR-G. These results suggest that vacuum heating is a viable technique for preparing different types of materials for releasing bacterial components, which is helpful for developing disease models for elucidating cellular senescence and bone regeneration.

Accuracy and precision of 3D-printed implant surgical guides with different implant systems: An in vitro study

STATEMENT OF PROBLEM

Implant guided surgery systems promise implant placement accuracy and precision beyond straightforward nonguided surgery. Recently introduced in-office stereolithography systems allow clinicians to produce implant surgical guides themselves. However, different implant designs and osteotomy preparation protocols may produce accuracy and precision differences among the different implant systems.

PURPOSE

The purpose of this in vitro study was to measure the accuracy and precision of 3 implant systems, Tapered Internal implant system (BioHorizons) (BH), NobelReplace Conical (Nobel Biocare) (NB), and Tapered Screw-Vent (Zimmer Biomet) (ZB) when in-office fabricated surgical guides were used.

MATERIAL AND METHODS

A cone beam computed tomography (CBCT) data set of an unidentified patient missing a maxillary right central incisor and intraoral scans of the same patient were used as a model. A software program (3Shape Implant Studio) was used to plan the implant treatment with the 3 implant systems. Three implant surgical guides were fabricated by using a 3D printer (Form 2), and 30 casts were printed. A total of 10 implants for each system were placed in the dental casts by using the manufacturer's recommended guided surgery protocols. After implant placement, postoperative CBCT images were made. The CBCT cast and implant images were superimposed onto the treatment-planning image. The implant positions, mesiodistal, labiopalatal, and vertical, as well as implant angulations were measured in the labiolingual and mesiodistal planes. The displacements from the planning in each dimension were recorded. ANOVA with the Tukey adjusted post hoc pairwise comparisons were used to examine the accuracy and precision of the 3 implant systems (α=.05).

RESULTS

The overall implant displacements were -0.02 ±0.13 mm mesially (M), 0.07 ±0.14 mm distally (D), 0.43 ±0.57 mm labially (L), and 1.26 ±0.80 mm palatally (P); 1.20 ±3.01 mm vertically in the mesiodistal dimension (VMD); 0.69 ±2.03 mm vertically in the labiopalatal dimension (VLP); 1.69 ±1.02 degrees in mesiodistal angulation (AMD); and 1.56 ±0.92 degrees in labiopalatal angulation (ALP). Statistically significant differences (ANOVA) were found in M (P=.026), P (P=.001), VMD (P=.009), AMD (P=.001), and ALP (P=.001). ZB showed the most displacements in the M and vertical dimensions and the least displacements in the P angulation (P<.05), suggesting statistically significant differences among the M, VMD, VLP, AMD, and ALP. NB had the most M variation. ZB had the least P deviation. NB had the fewest vertical dimension variations but the most angulation variations.

CONCLUSIONS

Dimensional and angulation displacements of guided implant systems by in-office 3D-printed fabrication were within clinically acceptable limits: <0.1 mm in M-D, 0.5 to 1 mm in L-P, and 1 to 2 degrees in angulation. However, the vertical displacement can be as much as 2 to 3 mm. Different implant guided surgery systems have strengths and weaknesses as revealed in the dimensional and angulation implant displacements.

Immediate dental implants placed into infected sites present a higher risk of failure than immediate dental implants placed into non-infected sites: Systematic review and meta-analysis

Background

Alveolar infection is known as a risk factor for implant failure. Current meta-analysis on the theme could not prove statistically that immediate dental implants placed into infected sites have a higher risk of failure than immediate dental implants placed into non-infected sites. The purpose of this meta-analysis was to determine the effectiveness of immediate dental implants placed into infected versus non-infected sites.

Material and Methods

Seven databases were sought by two reviewers. Randomized or non-randomized clinical trials that compared the placement of dental implants into infected versus non-infected sites were eligible for the study. Exclusion criteria were: papers in which the survival rate was not the primary outcome; papers without a control group; studies with less than one year of follow-up; studies whose patients did not receive antibiotic therapy; studies with medically compromised patients; duplicated papers. Risk of bias assessment was performed with the Cochrane Collaboration tool.

Results

Of the 3.253 initial hits, 8 studies were included in both qualitative and quantitative synthesis (kappa=0.90; very good agreement). Forest plot for implant failure showed that immediate implants placed into infected sites presented a statistically significant risk of failure that is almost 3 times higher than when placed into non-infected sites (risk ratio= 2.99; 95% confidence interval: 1.04, 8.56; p= 0.04; 935 implants; i2= 0%). Peri-implant outcomes showed no statistical difference.

Conclusions

Immediate dental implants placed into infected sites presented a statistically significant higher risk of failure than immediate dental implants placed into non-infected sites. Peri-implant outcomes were not statistically affected in this intervention.

Key words:Dental implants, infection, tooth socket, systematic review, immediate placement.

Trephination-based, guided surgical implant placement: A clinical study

STATEMENT OF PROBLEM

Conventional guided implant surgery promises clinical success through implant placement accuracy; however, it requires multiple drills along with surgical sleeves and sleeve adapters for the horizontal and vertical control of osteotomy drills. This results in cumbersome surgery, problems with patients having limited mouth opening, and restriction to specific drill or implant manufacturers. A protocol for using trephination drills to simplify guided surgery and accommodate multiple implant systems is introduced.

PURPOSE

The purpose of this clinical study was to evaluate the accuracy of implant placement using this novel guided trephine drill protocol with and without a surgical sleeve.

MATERIAL AND METHODS

Intraoral scanning and preoperative cone beam computed tomography (CBCT) scans were used for implant treatment planning. Surgical guides were fabricated using stereolithography. Implant surgery was performed using the guided trephination protocol with and without a surgical sleeve. Postoperative CBCT scans were used to measure the implant placement deviations rather than the implant planning position. Surgical placement time and patient satisfaction were also documented. One-tailed t test and F-test (P=.01) were used to determine statistical significance.

RESULTS

Thirty-five implants in 17 participants were included in this study. With a surgical sleeve, implant positional deviations were 0.51 ±0.13 mm vertically, 0.32 ±0.10 mm facially, 0.11 ±0.11 mm lingually, and 0.38 ±0.13 mm mesially. Without a surgical sleeve, implant positional deviations were 0.58 ±0.27 mm vertically, 0.3 ±0.14 mm facially, 0.39 ±0.16 mm lingually, and 0.41 ±0.12 mm mesially. No statistically significant difference was found between the 2 protocols (P>.01), except that the sleeve group had greater vertical control precision (F-test, P=.006), reduced placement time, and the time variation was reduced (t test, P=.003; F-test, P<.001).

CONCLUSIONS

This trephination-based, guided implant surgery protocol produces accurate surgical guides that permit guided surgery in limited vertical access and with the same guided surgery protocol for multiple implant systems. Guided sleeves, although not always necessary, improve depth control and reduce surgical time in implant placement.

Retrospective analysis of porous tantalum trabecular metal-enhanced titanium dental implants

STATEMENT OF PROBLEM

The design of porous tantalum trabecular metal-enhanced titanium (TM) dental implants promises improved osseointegration, especially when grafting materials such as demineralized bone matrix are used; however, studies are lacking.

PURPOSE

The purpose of this retrospective study was to compare TM implants with conventional titanium alloy (Ti) implants with and without demineralized bone matrix in terms of peri-implant bone remodeling in the first year after implant loading.

MATERIAL AND METHODS

A chart review was used for all patients receiving Tapered Screw-Vent Ti and TM implants. Implants were placed and restored by a single provider between 2011 and 2015. Peri-implant bone remodeling was compared by using a paired t test (α=.05).

RESULTS

A total of 82 patients received 205 implants, 44 TM and 161 Ti implants (control). No implants failed in the TM group (survival rate of 100%), and 3 implants in total, 1 immediate, failed in the Ti groups (survival rate of 98.1%). TM implants exhibited a 0.28-mm bone gain on average, whereas the control group demonstrated 0.20 mm of marginal bone loss after the first year of implant loading. Multivariate logistic regression analysis demonstrated that the odds of having bone loss was 64% less (odds ratio: 0.36; 95% confidence interval: 0.14-0.94) in the TM group than in the Ti group after controlling for bone grafting, implant location, immediate placement, bone type, and pretreatment bone level.

CONCLUSIONS

TM implants exhibited less peri-implant bone loss than the control Ti implants.

Which antibiotic regimen prevents implant failure or infection after dental implant surgery? A systematic review and meta-analysis

OBJECTIVE

To assess which antibiotic regimen prevents dental implant failures or postoperative infections following dental implant placement.

MATERIALS AND METHODS

Systematic review and meta-analysis.

DATA SOURCES

Pubmed, Cochrane, Science Direct, and EMBASE via OVID were searched up to August 2017. Only randomized controlled clinical trials (RCT) using antibiotics were included. Outcome measures were set on dental implant failures or postoperative infection incidence after dental implant surgery. Three reviewers independently undertook risk of bias assessment and data extraction. Stratified meta-analyses of binary data using fixed-effects models were performed using Stata 14.0. The risk ratio (RR) and 95% confidence interval (CI) were estimated.

RESULTS

Nine articles were included corresponding to 15 RCTs. All RCTs tested only oral amoxicillin. Implant-failure analysis: overall RR = 0.53 (P = .005, 95% CI: 0.34-0.82) and overall NNT = 55 (95% CI, 33-167). Single-dose oral amoxicillin preoperatively (SDOAP) is beneficial (RR = 0.50, CI: 0.29-0.86. P = .012), when compared to postoperative oral amoxicillin (POA): RR = 0.60, CI: 0.28-1.30. P = .197. Postoperative-infection analysis: overall RR = 0.76 (P = 0.250, 95% CI: 0.47-1.22). Neither SDOAP (RR = 0.82, CI = 0.46-1.45, P = .488) nor POA (RR = 0.64, CI = 0.27-1.51, P = .309) are beneficial. I² = 0.0%, chi-squared tests P ≈ 1.

CONCLUSION

Only SDOAP is effective and efficacious at preventing implant failures, but it was not significant for postoperative infections following dental implant surgeries.

In-office fabrication of dental implant surgical guides using desktop stereolithographic printing and implant treatment planning software: A clinical report

Guided surgery is accepted as the most accurate way to place an implant and predictably relate the implant to its definitive prosthesis, although few clinicians use it. However, recent developments in high-quality desktop 3-dimensional stereolithographic printers have led to the in-office fabrication of stereolithographic surgical guides at reduced cost. This clinical report demonstrates a protocol for using a cost-effective, in-office rapid prototyping technique to fabricate a surgical guide for dental implant placement.

Exploring Effectiveness of Computer-Aided Planning in Implant Positioning for a Single Immediate Implant Placement

The value of computer-aided implant planning using cone-beam computerized tomography (CBCT) for single immediate implants was explored. Eighteen patients requiring extraction of a tooth followed by a single immediate implant were enrolled. Small volume preoperative CBCT scans were used to plan the position of the implant. A taper screwed–type implant was immediately placed into a fresh socket using only the final 1 or 2 drills for osteotomy. Postoperative CBCTs were used for the analysis of actual implant placement positioning. Measurements of the planned and the actual implant position were made with respect to their position relative to the adjacent teeth. Mesio-distal displacements and the facial-lingual deviation of the implant from the planned position were determined. Changes in the angulation of the planned and actual implant position in relation to the clinical crown were also measured. To statistically summarize the results, box plots and 95% CIs for means of paired differences were used. The analysis showed no statistical difference between the planned position and final implant placement position in any measurement. The CBCT scans coupled with the computer-aided implant planning program along with a final 1-to-2 drill protocol may improve the accuracy of single immediate implant placement for taper screwed–type implants.

Complex systematic review - Perioperative antibiotics in conjunction with dental implant placement

OBJECTIVES

The aim of this study was to revisit the available scientific literature regarding perioperative antibiotics in conjunction with implant placement by combining the recommended methods for systematic reviews and complex systematic reviews.

MATERIAL AND METHODS

A search of Medline (OVID), The Cochrane Library (Wiley), EMBASE, PubMed and Health technology assessment (HTA) organizations was performed, in addition to a complementary hand-search. Selected systematic reviews and primary studies were assessed using GRADE and AMSTAR, respectively. A meta-analysis was performed.

RESULTS

The literature search identified 846 papers of which 10 primary studies and seven systematic reviews were included. Quality assessment of the systematic reviews revealed two studies of moderate risk of bias and five with high risk of bias. The two systematic reviews of moderate risk of bias stated divergent numbers needed to treat (NNT) to prevent one patient from implant failure. Four of the primary studies comparing antibiotic prophylaxis with placebo were estimated to be of low, or moderate, risk of bias and subjected to meta-analysis. The NNT was 50 (pooled RR 0.39, 95% CI 0.18, 0.84; P = 0.02). None of these four studies individually show a statistical significant benefit of antibiotic prophylaxis. Furthermore, narrative analysis of the studies eligible for meta-analysis reveals clinical heterogeneity regarding intervention and smoking.

CONCLUSION

Antibiotic prophylaxis in conjunction with implant placement reduced the risk for implant loss by 2%. However, the sub-analysis of the primary studies suggests that there is no benefit of antibiotic prophylaxis in uncomplicated implant surgery in healthy patient.

Immediate placement of a porous-tantalum, trabecular metal-enhanced titanium dental implant with demineralized bone matrix into a socket with deficient buccal bone: a clinical report

A missing or deficient buccal alveolar bone plate is often an important limiting factor for immediate implant placement. Titanium dental implants enhanced with porous tantalum-based trabecular metal material (PTTM) are designed for osseoincorporation, a combination of vascularized bone ingrowth and osseointegration (bone on-growth). Demineralized bone matrix (DBM) contains growth factors with good handling characteristics. However, the combination of these 2 materials in facial alveolar bone regeneration associated with immediate implant therapy has not been reported. A 65-year-old Asian woman presented with a failing central incisor. Most of the buccal alveolar bone plate of the socket was missing. A PTTM enhanced implant was immediately placed with DBM. Cone beam computed tomography scans 12 months after the insertion of the definitive restoration showed regeneration of buccal alveolar bone. A combination of a PTTM enhanced implant, DBM, and a custom healing abutment may have an advantage in retaining biologically active molecules and form a scaffold for neovascularization and osteogenesis. This treatment protocol may be a viable option for immediate implant therapy in a failed tooth with deficient buccal alveolar bone.