Enhancement of denitrification by sulfur-based carrier in sequencing batch reactor (SBR) for advanced wastewater treatment

This study was to enhance the nitrogen removal efficiency in the sequencing batch reactor (SBR) process by adding sulfur-based carriers. The nitrogen removal efficiency of the control group was compared with that of the experimental group through a two-series operation of SBR1 without carrier and SBR2 with the carrier under the condition of no external carbon source. A total nitrogen (T-N) removal efficiency of 6.6%, 72.6%, and 79.9% was observed in SBR1, SBR2 (5%), and (10%), respectively. The T-N removal efficiency was improved in the system with carriers, which showed an increase in the removal efficiency of approximately 91.7%. The results suggest that the inclusion of the carrier led to an elevation in the sulfur ratio, implying an augmented surface area for sulfur-based denitrifying microorganisms. Additionally, CaCO3 contributed essential alkalinity for sulfur denitrification, thereby preventing a decline in pH. Regardless of the carrier, the efficiency of organic matter removal surpassed 89%, indicating that the sulfur-based carrier did not adversely affect the biological reaction associated with organic matter. Therefore, autotrophic denitrification was successfully performed using a sulfur carrier in the SBR process without an external carbon source, improving the nitrogen removal efficiency.

Biological nitrogen removal from plating wastewater by submerged membrane bioreactor packed with granular sulfur

Recent toughened water quality standards have necessitated improvements for existing sewer treatment facilities through advanced treatment processes. Therefore, an advanced treatment process that can be installed through simple modification of existing sewer treatment facilities needs to be developed. In this study, a new submerged membrane bioreactor process packed with granular sulfur (MBR-GS) was developed and operated to determine the biological nitrogen removal behaviors of plating wastewater containing a high concentration of NO3(-). Continuous denitrification was carried out at various nitrogen loading rates at 20 °C using synthetic wastewater, which was comprised of NO3(-) and HCO3(-), and actual plating wastewater, which was collected from the effluent water of a plating company called 'H Metals'. High-rate denitrification in synthetic plating wastewater was accomplished at 0.8 kg NO3(-)-N/m(3)·day at a nitrogen loading rate of 0.9 kg NO3(-)-N/m(3)·day. The denitrification rate further increased in actual plating wastewater to 0.91 kg NO3(-)-N/m(3)·day at a nitrogen loading rate of 1.11 kg NO3(-)-N/m(3)·day. Continuous filtration was maintained for up to 30 days without chemical cleaning with a transmembrane pressure in the range of 20 cmHg. Based on stoichiometry, SO4(2-) production and alkalinity consumption could be calculated theoretically. Experimental alkalinity consumption was lower than the theoretical value. This newly proposed MBR-GS process, capable of high-rate nitrogen removal by compulsive flux, is expected to be applicable as an alternative renovation technique for nitrogen treatment of plating wastewater as well as municipal wastewater with a low C/N ratio.