Gastrointestinal tissue engineering

Development and evaluation of different electroactive poly(vinylidene fluoride) architectures for endothelial cell culture

Tissue engineering (TE) aims to develop structures that improve or even replace the biological functions of tissues and organs. Mechanical properties, physical-chemical characteristics, biocompatibility, and biological performance of the materials are essential factors for their applicability in TE. Poly(vinylidene fluoride) (PVDF) is a thermoplastic polymer that exhibits good mechanical properties, high biocompatibility and excellent thermal properties. However, PVDF structuring, and the corresponding processing methods used for its preparation are known to significantly influence these characteristics.

In this study, doctor blade, salt-leaching, and electrospinning processing methods were used to produce PVDF-based structures in the form of films, porous membranes, and fiber scaffolds, respectively. These PVDF scaffolds were subjected to a variety of characterizations and analyses, including physicochemical analysis, contact angle measurement, cytotoxicity assessment and cell proliferation.

All prepared PVDF scaffolds are characterized by a mechanical response typical of ductile materials. PVDF films displayed mostly vibration modes for the a-phase, while the remaining PVDF samples were characterized by a higher content of electroactive β-phase due the low temperature solvent evaporation during processing. No significant variations have been observed between the different PVDF membranes with respect to the melting transition. In addition, all analysed PVDF samples present a hydrophobic behavior. On the other hand, cytotoxicity assays confirm that cell viability is maintained independently of the architecture and processing method. Finally, all the PVDF samples promote human umbilical vein endothelial cells (HUVECs) proliferation, being higher on the PVDF film and electrospun randomly-oriented membranes. These findings demonstrated the importance of PVDF topography on HUVEC behavior, which can be used for the design of vascular implants.

Biomechanical and microstructural characterisation of the porcine stomach wall: Location- and layer-dependent investigations

The mechanical properties of the stomach wall help to explain its function of storing, mixing, and emptying in health and disease. However, much remains unknown about its mechanical properties, especially regarding regional heterogeneities and wall microstructure. Consequently, the present study aimed to assess regional differences in the mechanical properties and microstructure of the stomach wall. In general, the stomach wall and the different tissue layers exhibited a nonlinear stress-stretch relationship. Regional differences were found in the mechanical response and the microstructure. The highest stresses of the entire stomach wall in longitudinal direction were found in the corpus (201.5 kPa), where food is ground followed by the antrum (73.1 kPa) and the fundus (26.6 kPa). In contrast, the maximum stresses in circumferential direction were 39.7 kPa, 26.2 kPa, and 15.7 kPa for the antrum, fundus, and corpus, respectively. Independent of the fibre orientation and with respect to the biaxial loading direction, partially clear anisotropic responses were detected in the intact wall and the muscular layer. In contrast, the innermost mucosal layer featured isotropic mechanical characteristics. Pronounced layers of circumferential and longitudinal muscle fibres were found in the fundus only, whereas corpus and antrum contained almost exclusively circumferential orientated muscle fibres. This specific stomach structure mirrors functional differences in the fundus as well as corpus and antrum. Within this study, the load transfer mechanisms, connected with these wavy layers but also in total with the stomach wall's microstructure, are discussed. STATEMENT OF SIGNIFICANCE: This article examines for the first time the layer-specific mechanical and histological properties of the stomach wall attending to the location of the sample. Moreover, both mechanical behaviour and microstructure were explicitly match identifying the heterogeneous characteristics of the stomach. On the one hand, the results of this study contribute to the understanding of stomach mechanics and thus to their functional understanding of stomach motility. On the other hand, they are relevant to the fields of constitutive formulation of stomach tissue, whole stomach mechanics, and stomach-derived scaffolds i.e., tissue-engineering grafts.

Tissue engineering of the stomach

Tissue engineering combines engineering principles with the biological sciences to create functional replacement tissues. The underlying principle of tissue engineering is that isolated cells combined with biomaterials can form new tissues and organs in vitro and in vivo. This review focuses on stomach tissue engineering, which is a promising approach to the treatment of gastric cancer, the fourth most common malignancy in the world and the second-leading cause of cancer mortality worldwide. Although gastrectomy is a reliable intervention to achieve complete removal of cancer lesions, the limited capacity for food intake after resection results in lower quality of life for patients. To address this issue, we have developed a tissue-engineered stomach to increase the capacity for food intake by creating a new food reservoir. We have transplanted this neo-stomach as a substitute for the original native stomach in a rat model and confirmed functional adaptation. Furthermore, we have demonstrated the feasibility of transplanting a tissue-engineered gastric wall patch in a rat model to alleviate the complications after resection of a large area of the gastric wall. Although progress has been achieved, significant challenges remain to bring this approach to clinical practice. Here, we summarize our work and present the state of the art in stomach tissue engineering.

Generating intestinal tissue from stem cells: potential for research and therapy

Intestinal resection and malformations in adult and pediatric patients result in devastating consequences. Unfortunately, allogeneic transplantation of intestinal tissue into patients has not been met with the same measure of success as the transplantation of other organs. Attempts to engineer intestinal tissue in vitro include disaggregation of adult rat intestine into subunits called organoids, harvesting native adult stem cells from mouse intestine and spontaneous generation of intestinal tissue from embryoid bodies. Recently, by utilizing principles gained from the study of developmental biology, human pluripotent stem cells have been demonstrated to be capable of directed differentiation into intestinal tissue in vitro. Pluripotent stem cells offer a unique and promising means to generate intestinal tissue for the purposes of modeling intestinal disease, understanding embryonic development and providing a source of material for therapeutic transplantation.

Self-expanding removable plastic stents for the protection of surgical anastomoses after esophageal replacement in a porcine model

BACKGROUND

Esophageal replacement by biological graft is associated with a high risk of anastomotic leak-related mediastinitis.

OBJECTIVE

To determine whether a self-expanding plastic stent can help avoid anastomotic leak after full-thickness replacement of the esophagus in a porcine model.

DESIGN

Experimental feasibility study in a porcine model.

SUBJECTS

Twelve pigs were analyzed in the study.

INTERVENTIONS

Replacement of a 2-cm-long segment of the cervical esophagus by an aortic allograft was performed in 12 pigs, with 6 pigs used as graft donors. Animals were divided into 2 groups depending on whether a self-expanding removable plastic stent protecting the 2 aortoesophageal anastomoses was inserted (n = 7) or not (n = 5), and were allowed to eat 24 hours postoperatively.

MAIN OUTCOME MEASUREMENTS

The relative occurrence of mediastinitis caused by anastomotic leakage in stented and nonstented groups was assessed; endoscopic evaluation and histological analysis of the graft area were performed 1 month after esophageal replacement.

RESULTS

All animals (n = 5) without stent insertion died of anastomotic leakage within 20 days of surgery. Two of the 7 stented animals died at day 2, and 5 survived 1 month in good clinical condition. Two stent migrations were noted. Stent extraction was followed by the development of a fibrous stricture.

CONCLUSIONS

The use of a self-expanding plastic stent seems to allow leak-free healing after circumferential replacement of the esophagus by a biological graft in a porcine model.

Composite scaffolds for the engineering of hollow organs and tissues

Several types of synthetic and naturally derived biomaterials have been used for augmenting hollow organs and tissues. However, each has desirable traits which were exclusive of the other. We fabricated a composite scaffold and tested its potential for the engineering of hollow organs in a bladder tissue model. The composite scaffolds were configured to accommodate a large number of cells on one side and were designed to serve as a barrier on the opposite side. The scaffolds were fabricated by bonding a collagen matrix to PGA polymers with threaded collagen fiber stitches. Urothelial and bladder smooth muscle cells were seeded on the composite scaffolds, and implanted in mice for up to 4 weeks and analyzed. Both cell types readily attached and proliferated on the scaffolds and formed bladder tissue-like structures in vivo. These structures consisted of a luminal urothelial layer, a collagen rich compartment and a peripheral smooth muscle layer. Biomechanical studies demonstrated that the tissues were readily elastic while maintaining their pre-configured structures. This study demonstrates that a composite scaffold can be fabricated with two completely different polymer systems for the engineering of hollow organs. The composite scaffolds are biocompatible, possess adequate physical and structural characteristics for bladder tissue engineering, and are able to form tissues in vivo. This scaffold system may be useful in patients requiring hollow organ replacement.